CS Paper Radar

Autonomous Agricultural Tractor: Integrated Weed Detection and LiDAR Navigation for Precision Paddy Farming

Benjamin Merryman-Smith, Tony Nguyen, Bilal Dogutas, Krish Shah, Anthony Raphael, Sudip Dhakal

cs.RO cs.CV ·submitted 2026-08-19 15:04 UTC · v1

Abstract

Site-specific weed management in paddy farming offers substantial reductions in herbicide use over conventional broadcast spraying, but field deployment has been limited by three persistent challenges: robust crop-row navigation under canopy where GNSS degrades, real-time visual discrimination between rice and morphologically diverse weeds, and the asymmetric cost of misclassifying rice as weed, which is irreversible. This paper presents AgriNav, an integrated autonomous tractor system built around four ROS-coupled modules: a custom PyTorch reimplementation of WeedDet for rice detection, a parallel lightweight 1.68M-parameter CNN-FPN variant with asymmetric class weighting, an inverted-logic discrimination module that protects the rice class through a hardcoded confidence-gate veto, and a 6-state constant-velocity-turn-rate Extended Kalman Filter fusing GNSS, IMU, and wheel odometry with three-level outage bridging. Our primary system-level contribution is a four-mechanism LiDAR-camera fusion bridge that uses the navigation LiDAR for region-of-interest constraint, world-coordinate projection, ground-plane filtering, and bidirectional confidence fusion at zero additional hardware cost. Simulation experiments demonstrate continuous position tracking through a 20-second GNSS outage, crop row detection confidence above 0.9 throughout operation, and rice-detection confidences from 0.32 to 0.95 across paddy, aerial, and post-flood imagery. The LiDAR ROI constraint reduces detection inference region by an estimated 30 to 50 percent.

Closest papers

Nearest neighbours by meaning across the whole index.

UltraLight Luma: A Novel Edge-Deployable Perception Network for Crop-Row Segmentation in Agricultural Robotics

cs.RO ·2026-10-08 ·Dhanushka Balasingham, Shamod Ginigaddarage, Hanojhan Rajahrajasingh, Nuwan Kodagoda, Rajitha de Silva
published similarity 0.62
Abstract · This work has been accepted for publication in IECON 2026. The final published version will be available via IEEE Xplore

Reliable crop-row perception is essential for autonomous agricultural robots, but low-cost deployment is constrained by computation, memory, power, and inference time. This paper addresses crop-row detection and navigation-line extraction using UltraLight Luma, a compact encoder-decoder segmentation network with a progressive learning strategy and only 13.1k trainable parameters. The predicted crop-row masks are processed using a post-processing algorithm to estimate row alignment for downstream visual servoing. UltraLight Luma improves parameter efficiency over U-Net, YOLOv8, and YOLOv26 while maintaining reliable crop-row detection performance. The model required only 25.23 mJ per inference, demonstrating its suitability for resource-constrained agricultural robots.

0.35

Multi-Speed Field Evaluation of a Semi-Autonomous Precision Sprayer for Weed Control in Vegetable Crops

cs.CV ·2026-10-17 ·Md Khairul Islam, Boyang Deng, Yuzhen Lu, Daniel Brainard, Ajit Srivastava
similarity 0.61
Abstract · 16 pages, 5 figures, 7 tables

Machine vision-guided precision spraying is promising for sustainable vegetable production by enabling site-specific weed targeting, reducing herbicide application while protecting crop yield and quality. However, the effects of operating speed of sprayer systems on the integrated detection-tracking-actuation pipeline remain insufficiently characterized under field conditions. This study evaluated a semi-autonomous, tractor-based spraying system for targeted weed control in radish and quantified performance across three operating speeds. A five-season dataset comprising 10,599 images and 84,311 annotated instances across seven classes was curated for model development. A YOLOv11-medium model was integrated with ByteTrack tracking and a customized 12-nozzle sprayer on a semi-autonomous electric tractor. Field trials were conducted at 0.13, 0.27, and 0.45 m/s (i.e., 0.3, 0.6, and 1.0 mph) to characterize speed-dependent changes in weed detection, targeting, actuation, and crop damage. At the lowest speed of 0.13 m/s, the system achieved 94.6% mAP@50 and 93.2% recall for weed and crop detection. However, increasing platform speed substantially reduced system performance, with weed hit rate declining from 78.3% to 35.0% and crop contact rates increasing from 20.1% to 28.7%. Consequently, the system did not meet predefined commercial-viability thresholds. These results demonstrate that practical deployment requires improvements beyond weed detection alone, particularly coordinated improvements in motion-robust plant perception, spray-timing compensation, and crop-adjacent actuation precision. The identified performance bottlenecks provide specific engineering targets for advancing vision-guided precision spraying toward practical, high-speed vegetable weed management. The software programs developed in this study have been made publicly available to support future precision weeding research.

0.27

Visual-SLAM for the detection of hidden tomatoes in greenhouses by Hierarchical Localization and GLOMAP for robotized harvesting

cs.RO ·2026-09-10 ·Fernando Cañadas-Aránega, José C. Moreno, José L. Blanco-Claraco, Francisco Rodríguez
similarity 0.59
Abstract

Advanced crop monitoring inside greenhouses is becoming one of the primary objectives of research centers. High-performance sensors, such as LiDAR or stereo cameras, have traditionally been employed for this purpose, though these often have a high cost. This work proposes a Visual-SLAM system using a monocular camera, which is significantly more cost-effective and specifically tailored for agricultural applications, such as mapping tomato crops in a greenhouse. Tests were carried out on a real tomato bunch, located in the Agroconnect experimental greenhouse. A ROS 2 Humble node was developed to run on the robot in order to capture images of these crops, which were then stored for offline processing. To generate a 3D mapped model for the crop in the greenhouse, the GLOMAP mapper, based on Structure-From-Motion, was integrated with the Hierarchical Localization toolbox. This initial mapping is a foundation for future, more advanced algorithms to analyze growth patterns, and optimize agricultural management. The system leverages a hierarchical localization paradigm based on a coarse-to-fine strategy: it first performs global retrieval to generate location hypotheses, then combines local features within the identified candidate regions. The results show a correct identification of the tomato cluster, correctly characterising the tomato that is occluded and inaccessible by classical vision technologies. The reconstructed 3D model was further validated against manual ground-truth measurements of fruit size, centroid position, and orientation, confirming the geometric accuracy of the proposed low-cost monocular pipeline.

0.33

A Comparative Evaluation of Deep Learning Object Detection Models on a Real-World Multi-Plant Dataset from Africa

cs.CV cs.AI ·2026-08-11 ·Ismail Ismail Tijjani, Sunusi Muhammad Ibrahim, Amina Ibrahim Khaleel, Lanre Olusegun Akinola, Fatima Isa Jibrin +3 more
similarity 0.59
Abstract

The application of computer vision in agriculture has shown significant potential for improving crop monitoring and precision farming. However, many existing approaches rely on controlled datasets that do not adequately represent realworld farming conditions, particularly in underrepresented regions such as Africa. This study presents a comparative evaluation of six object detection models YOLOv5, YOLOv8, YOLO11, YOLO26, Faster R-CNN, and RT-DETR using a real-world dataset, AgriAISeg 1 , collected manually from Nigerian farms. AgriAISeg comprises 3,382 images of sesame, cabbage, and tomato crops captured under varying environmental conditions, including changes in illumination, occlusion, and viewing perspectives. Models were trained, and performance was assessed using precision, recall, mAP@0.5, and mAP@0.5:0.95. The results show that RT-DETR achieved the highest overall performance with a precision of 0.768 and mAP@0.5:0.95 of 0.624, while YOLOv8 and YOLO11 also demonstrated strong and consistent performance. In contrast, Faster R-CNN recorded significantly lower accuracy, with an overall mAP@0.5 of 0.466, indicating reduced effectiveness under complex field conditions. In addition, YOLO-based models exhibited superior training efficiency compared to Faster R-CNN.These findings demonstrate that modern one-stage and transformer-based detectors provide more reliable and efficient solutions for plant detection in realworld agricultural environments.

0.04

Agibot: An Open-Source Modular Swerve-Drive Robot Platform for Agricultural Robotics Research and Education

cs.RO cs.LGeess.SY ·2026-11-06 ·Moeen Ul Islam, Bishal Adhikari, Kori Edwards, Lorien Harvey, J. Alex Thomasson +1 more
code/data similarity 0.58
Abstract · 14 pages. Submitted to IEEE Transactions on AgriFood Electronics (TAFE)

Agricultural production faces persistent labor shortages and increasing demand for automation, yet progress in agricultural robotics remains constrained by the limited availability of affordable, flexible, and accessible research platforms. This paper presents Agibot, an open-source, modular, low-cost agricultural robotics platform designed for autonomy research and experimentation, with potential applications in hands-on robotics education. The platform integrates four-wheel independent swerve drive, swappable computing, distributed embedded control, multimodal sensing, and configurable manipulation within a unified sense-plan-act-verify framework supporting perception, control, navigation, manipulation, and autonomous task verification. The platform was evaluated through representative row-crop navigation and manipulation tasks under varying lighting and soil conditions. Experiments demonstrated reliable lane following, autonomous row-to-row navigation, target identification, seed dispensing, plant manipulation, and closed-loop verification of task success. Its modular architecture supports independent testing, modification, and validation of autonomy components for rapid prototyping and experimentation. These proof-of-concept tasks, controller-tuning studies, and integrated trials demonstrate the platform's research capabilities, while its accessible and reconfigurable design supports its use for hands-on robotics education. By combining affordability, modularity, open-source accessibility, configurable manipulation, and end-to-end sense-plan-act-verify autonomy, Agibot provides a practical platform for agricultural robotics research, technology development, and workforce training.

0.34

On the Transferability of Agricultural Weed Detection Under Cross-Field Distribution Shift

cs.CV cs.LG ·2026-08-21 ·Nikhilesh Prabhakar, Pranuthi Tenali, Wilfredo Abudeye Fernandez, Shekhar Borah, Athresh Karanam +3 more
similarity 0.58
Abstract

Accurate agricultural weed detection in real-world field conditions is essential for precision agriculture, enabling targeted intervention and reducing yield loss. Recent work has reported strong detection performance from UAV-based imagery across a range of crops, yet existing approaches evaluate within a single crop and field, leaving practitioners with little evidence that a model trained on one crop will generalize to a new field or crop type. In this work, we characterize where cross-dataset weed-localization performance degrades and which modeling choices recover it, reducing the need to relabel every new deployment field. We introduce a newly collected and annotated UAV image dataset for agricultural weed detection in cotton fields and use it alongside an existing soybean dataset collected under a similar protocol. Using these datasets, we evaluate the performance of several strategies for transferring a detector trained on one crop to another, comparing unsupervised domain adaptive object detection (DAOD) against pretraining on a domain-adjacent source dataset followed by few-shot fine-tuning on the target dataset. Our analysis spans target-domain label budgets from zero to the full target dataset, characterizing the trade-off between adaptation strategy and annotation effort. We find that few-shot fine-tuning with as few as 25 labeled target examples outperforms unsupervised DAOD in our cross-crop comparison, suggesting that source domain selection combined with modest target supervision is more productive than algorithmic sophistication in adaptation.

0.21

Plant Growth Estimation with a Camera-Based Vegetation Index Mapping System for Agricultural Ground Vehicles

eess.IV ·2026-09-03 ·Lukas Pindl, Michael Maier, Timo Oksanen
similarity 0.57
Abstract

This work presents a camera-based sensor for mapping plant growth over an agricultural field. The sensor can be used on ground-based vehicles like a tractor and relies on RTK-GNSS to correctly merge many multispectral images onto one map. NDVI is used as an index to estimate plant growth, but the approach can be used with other indices as well depending on the camera. The images from the camera are projected onto the estimated ground plane using perspective projection. This computationally simple approach allows for real-time processing of all images on the field even with low-end hardware. The results are compared to a commercially established vehicle-mounted sensor. Absolute values are hard to compare, but both sensors show similar trends. The camera-based approach also allows for filtering of ground and non-ground areas, potentially reducing the impact of crop density on the average measured NDVI.

0.24

When Ground-Truth Fidelity Matters: An Orchestrated UAS Framework for Wheat Streak Mosaic Virus Detection Using Vision Transformers and Machine Learning

cs.CV ·2026-09-10 ·Dewi Endah Kharismawati, Sandeep Dhakal, Courtney E. McCusker, Jennifer R. Wilson, Erik W. Ohlson +1 more
similarity 0.57
Abstract · 29 pages, 9 figures, 2 tables. Submitted to Computers and Electronics in Agriculture

Wheat streak mosaic virus (WSMV) is a destructive pathogen of sweet corn and other cereal crops, causing yield losses and complicating early detection because symptoms are spatially variable and subtle. In sweet corn seed production, WSMV also has regulatory importance, as phytosanitary regulations from countries such as New Zealand and Chile require seed lots to be certified virus-free. Visual scouting is unreliable because symptoms can resemble abiotic stress, while enzyme-linked immunosorbent assay (ELISA) is accurate but expensive, labor-intensive, and difficult to scale. We present an automated pipeline for plant-level WSMV detection using unmanned aircraft systems (UAS) multispectral imagery. The framework integrates orthomosaic reconstruction, geospatial alignment, plant extraction, and classification using a Vision Transformer with seven-channel inputs (five spectral bands, NDVI, and NDRE). Using treatment-based labels, the model achieved 89% accuracy on over 6,500 test patches across multiple growth stages. However, ELISA-based ground truth revealed substantial label noise: only a small fraction of sampled plants in inoculated plots were infected. Treatment labels therefore did not reliably represent infection status, and the high accuracy was largely driven by label bias rather than disease detection. Performance decreased markedly against row-level symptom severity and plant-level ELISA labels. Under these higher-fidelity but smaller-sample conditions, both deep learning and classical machine learning showed limited generalization and weak separability between ELISA-confirmed mock-inoculated and infected plants. These results show that UAS-based disease detection is constrained by label fidelity and data availability, emphasizing biologically grounded labels and models aligned with real-world conditions.

0.27