CS Paper Radar

Compute-in-Memory Attention: A Time-Domain Analog Softmax Circuit with RC-Tunable Temperature

Ankur Singh, Ashish Gautam, Shruti R. Kulkarni, Guojing Cong

cs.AR cs.LG ·submitted 2026-09-02 18:43 UTC · v1

Abstract

Softmax is a key operation in Transformer attention, but its exponentiation and normalization add significant overhead in compute-in-memory (CIM) accelerators, especially when analog attention scores must first be converted to the digital domain. This work presents a tunable-temperature analog softmax circuit in GlobalFoundries 22-nm fully depleted silicon-on-insulator (FDSOI) technology that operates directly on CIM-generated score voltages without intermediate analog-to-digital conversion. Each input score is converted into a time-domain event using a shared falling ramp. The corresponding comparator transition samples an RC-decaying reference to generate an exponential weight, which is then processed by an in-circuit normalization stage. In contrast to analog softmax circuits that rely on transistor weak-inversion behavior for exponentiation, the proposed architecture controls the softmax response through the ramp slope and RC time constant, enabling programmable effective temperature. The 128-element architecture is evaluated using transistor-level and post-layout extracted simulations, including multi-level input vectors, capacitance variation and mismatch, process and temperature variation, monte carlo analysis, and shared-interconnect parasitics. The complete 128-element implementation occupies 9453.42~$μ\mathrm{m}^{2}$ including the shared global ramp circuitry, while each replicated softmax element occupies 70.2~$μ\mathrm{m}^{2}$. The circuit achieves a 242.97-ns evaluation latency at 13.44~mW total power, corresponding to 25.5~pJ per output element. The simultaneous 128-element evaluation achieves an RMSE of 24.46~mV relative to the ideal softmax response. The extracted circuit characteristics are further incorporated into a MemTorch-based hardware-aware Transformer model, where the proposed softmax achieves a validation loss within 2.5\% of the ideal-softmax baseline.

Comment
13 page, 16 figure

Closest papers

Nearest neighbours by meaning across the whole index.

FlexSpIM: An Event-Based Digital Compute-In-Memory Accelerator with Flexible Operand Resolution and Layer-Wise Hybrid Stationarity

cs.AR ·2026-09-08 ·Nicolas Chauvaux, Adrian Kneip, Charlotte Frenkel
similarity 0.60
Abstract · 14 pages, 17 figures, 2 tables

Compute-in-memory (CIM) accelerators for spiking neural networks (SNNs) offer a promising solution for achieving $μ$s-level inference latency and ultra-low energy in edge vision applications. However, their limited flexibility at both circuit and system levels restricts their deployment across diverse workloads. This work introduces FlexSpIM, a digital CIM architecture supporting arbitrary operand resolution and shape within a unified storage for weights and neuron states (i.e., membrane potentials). These circuit-level capabilities enable a layer-level hybrid weight- and output-stationary dataflow, maximizing operand reuse and reducing costly on- and off-chip data movement during SNN execution. Measurement results from a fabricated FlexSpIM prototype in 40-nm CMOS demonstrate competitive 1-bit-normalized energy efficiency and higher throughput compared with prior fixed-precision digital CIM-based SNN accelerators, while providing bitwise resolution reconfiguration. Evaluated on the IBM DVS gesture dataset, FlexSpIM achieves 95.8% accuracy while enabling up to 45% energy and 52% latency reductions in large-scale systems compared with fixed stationarity approaches.

0.13

Making Analog Training Scale: Co-Designing Mapping, Optimizer, and Converters

cs.LG cs.AR ·2026-09-29 ·Zhaoxian Wu, Tayfun Gokmen, Omobayode Fagbohungbe, T. Patrick Xiao, Tianyi Chen
similarity 0.59
Abstract

Analog in-memory computing (AIMC) offers an alternative for model training by executing matrix operations directly where weights are stored. However, scaling AIMC to train modern deep models remains an open challenge due to severe hardware non-idealities, including physical weights with finite dynamic range and write granularity, analog-digital converters with finite resolution, and noisy and asymmetric updates. Guided by the insight that gradient accumulation is sensitive to precision and rounding errors, we adopt a mixed-precision training paradigm: executing forward and backward matrix multiplications in the analog domain while computing weight gradients in the digital domain. To enable scalable training, we present a holistic system-algorithm co-design that co-optimizes weight mapping to ensure well-conditioned physical and logical weight profiles, couples a preconditioned optimizer with threshold-triggered open-loop pulsing to stabilize training trajectories, and aligns converter dynamic ranges to suppress quantization errors. Evaluated via hardware-calibrated architectural simulations calibrated with electrochemical RAM measurements, our framework scales Transformer training up to $123\text{M}$ parameters with validation loss scaling as $L\propto N^{-0.231}$, where $N$ is the parameter count, comparable to $L\propto N^{-0.238}$ for digital training.

0.47

You Only Charge Once 2.0 : A End-to-End Analog Computing-in-Memory Architecture with Reconfigurable Switched Capacitors

cs.AR ·2026-08-11 ·Zihao Xuan, Yewen Li, Jia Chen, Wei Xuan, Xiao Huo +1 more
similarity 0.59
Abstract · 13 pages, 19 figures

Analog Computing-in-Memory (ACiM) accelerates deep neural networks by keeping weights inside memory arrays and executing dot products in the analog domain. However, modern ACiM accelerators are often limited by the "ADC wall": analog-to-digital converters consume a large fraction of energy and area, while bit-sliced execution repeatedly invokes these converters. Existing designs reduce this cost with low-resolution readout or time multiplexing, but they either lose output fidelity or introduce serialization overhead. Charge-CIM addresses this bottleneck by using switched-capacitor charge redistribution as a unified computing and conversion substrate. The same capacitor fabric performs input conversion, analog MAC, weighted shift-and-add, and readout quantization, reducing both standalone converter overhead and intermediate ADC invocations. A differential readout path further combines paired partial sums during ADC quantization, providing a highly compact and energy-efficient solution for array integration. With dataflow architecture support, we evaluated Charge-CIM on a suite of DNN benchmarks, from CNNs to Transformer models, and experimental results show that Charge-CIM reduces ADC energy by 91.7% under our evaluation setup and improves energy efficiency by 2.7x and throughput by 2.0x compared to the state-of-the-art charge-domain CIM accelerator.

0.10

An Emerging NVM-Based On-Chip Training Architecture with Non-Ideality Mitigation Through Bipolar Weight Distributions

cs.AR ·2026-09-01 ·Peng Dang, Youna Huang, Yintao He, Huawei Li
top venuebenchmark similarity 0.58
Abstract · 14 pages. Accepted for publication in IEEE Transactions on Very Large Scale Integration (VLSI) Systems

The rapid advancement of deep learning has presented significant energy efficiency challenges to the conventional von Neumann architecture. In-memory computing (IMC) architectures based on emerging non-volatile memory (eNVM) are widely regarded as a promising solution for accelerating neural network training due to their high parallelism and low power consumption. However, the intrinsic non-idealities of eNVM devices can cause conductance updates to deviate from target values, thereby limiting the performance of on-chip training. To address this challenge, this paper presents a Non-ideality Optimized eNVM Accelerator (NOVA) architecture for on-chip training. Specifically, we first fabricate a two-dimensional (2D) ferroelectric field-effect transistor (FeFET) and develop a conductance modulation behavioral model calibrated with experimental data. Building upon this device model, we propose, for the first time, a Non-ideality Avoidance Training (NAT) algorithm tailored for eNVM devices, which mitigates accuracy degradation by guiding weight convergence toward the most stable conductance regions of eNVM devices. Experimental results demonstrate that, even under severe device asymmetry, NAT improves the accuracy by an average of 15.1\% over the baseline methods across multiple benchmark tasks. Meanwhile, the NOVA achieves an average energy efficiency gain of approximately 33.58$\times$ compared with the peak energy efficiency of graphics processing units (GPUs).

0.68

ReCIM-HD: A 40 nm On-Device Learning Accelerator with Hyperdimensional Computing via Importance-Based Hybrid Digital-ReRAM CIM

cs.AR cs.ET ·2026-11-18 ·Keming Fan, Chang Eun Song, Soumil Jain, Weihong Xu, Gopabandhu Hota +7 more
similarity 0.57
Abstract · ESSERC'26

ReCIM-HD is an on-device learning (ODL) accelerator that integrates gradient-free hyperdimensional computing (HDC) with resistive RAM (ReRAM)-based analog compute-in-memory (CIM). ReCIM-HD introduces three key techniques: (1) ultra-low-power HDC-based edge ODL without costly back-propagation operations; (2) non-volatile ReRAM-based storage for class hypervectors and CIM similarity search, enabling energy-efficient inference and power-gating during idle periods without data loss; and (3) a hybrid digital-analog CIM inference flow that protects a small accuracy-critical subset digitally to preserve accuracy. Additionally, it employs a Kronecker HD encoder (KE) to reduce encoding overhead and a customized instruction set architecture (ISA) to support flexible programmability. Fabricated in 40 nm, ReCIM-HD achieves 44.17 TOPS/W (hybrid mode) and 75.8 TOPS/W (ReRAM CIM mode), delivering up to 20.1x higher energy efficiency than the state-of-the-art accelerator.

0.19

A CPU Inside an LLM: Zero-Gradient Compilation of Exact Circuits into Pretrained Weights

cs.AI ·2026-11-19 ·Tanmay Sah
similarity 0.56
Abstract · 27 pages, 3 figures, 24 tables

Pretrained language models (LMs) remain unreliable on exact multi-digit arithmetic without gradient fine-tuning or external tool interpreters. We introduce closed-form, zero-gradient circuit-grafting primitives that compile deterministic computation directly into pretrained LM weights using zero training examples and zero runtime hooks, while bounding per-layer normalization drift and preserving natural-language (NL) competence. Our construction combines three analytical mechanisms: (1) two-layer Mellin-GLU quadrature over bias-free SwiGLU/GeGLU layers, turning unknown per-token RMSNorm scaling into translation along a log-spaced gate grid ($>250\times$ dynamic range) with IEEE 754 error bounds; (2) cross-token scale cancellation via signed Chebyshev Indefinite-RoPE self-sink attention and memoryless SiLU-antisymmetric GatedDeltaNet shifts; and (3) axis-aligned width extension ($d \to d+K$) with $\sqrt{d/(d+K)}$ norm compensation, Base-1000 canonical BPE emission, and differential $(+254,-256)$ tied unembeddings. An automated 5-stage compiler synthesizes 4-8 digit signed $\{+,-,\times\}$ circuits in constant $\mathsf{TC}^0$ depth alongside 3-literal Boolean (100%, $N=1{,}728$; plus 42-layer Gemma 4 E4B audits) and 5-bit Majority/Parity (100%) circuits. On 6-digit arithmetic ($N=1{,}200$, BF16), IBM Granite 4.2 3B (1.07M-1.33M active non-zeros, $\le 0.036\%$) and Alibaba Qwen 3.5 4B (2.25M-2.39M non-zeros, $\le 0.057\%$) reach 99.17% and 100.00% ALU-prefix accuracy (100% with an FP32 sidecar) and 98%-100% mid-sentence resumption, outperforming 12.8K-sample LoRA (42.2% / 61.7%, 0% inline continuation). A factorized block-sparse sidecar holds A100 memory at 7.89 / 10.65 GiB (4.60 / 8.14 GiB under INT8/INT4 + FP32 sidecar) while passing all 14/14 pre-registered $>2$K-token Tango splits ($N=4{,}392$; 0/11,134 OOD triggers).

0.31

FlashBoB: I/O-Efficient Exact Backward-over-Backward for Softmax Attention

cs.LG cs.AI ·2026-09-21 ·Anthony Givans, Michael Crawshaw, Mingrui Liu
top venuetheory similarity 0.56
Abstract · Accepted by NeurIPS 2026

Transformer models built on the attention mechanism have become a central building block in modern deep learning, yet softmax attention remains a major bottleneck for long-context workloads. While FlashAttention makes the forward and first backward passes I/O-efficient, it does not support backward-over-backward (BoB), which enables exact differentiation through the backward pass for applications such as second-order optimization, test-time training, gradient-based memory, and meta-learning. Existing BoB implementations either materialize large intermediate tensors or exhaust GPU memory at long sequence lengths. We present FlashBoB, an exact, I/O-efficient algorithm for BoB in softmax attention that keeps computation within on-chip tiles and avoids all $N \times N$ intermediate tensors, where $N$ is the sequence length. The key insight is a hierarchical affine structure in the softmax double backward: two row-wise scalars determine all outputs through affine transformations. This yields a two-pass schedule with bounded on-chip static random-access memory (SRAM) usage and minimal off-chip high-bandwidth memory (HBM) traffic. FlashBoB achieves $Θ(N^2 d^2/M)$ HBM traffic ($d$ is the head dimension and $M$ is the memory size) and, within the standard FlashAttention-style score-recomputation model, matches the inherited large-cache lower bound for exact forward attention. Empirically, it scales exact attention BoB to $N=262\text{K}$ on a single A100 80GB GPU, where prior PyTorch exact baselines fail by $N=16\text{K}$, and is up to $6.3\times$ faster than FlashBack. These results make exact second-order attention practical at long-context sequence lengths where prior implementations cannot run efficiently.

0.42

Pretraining Transformers with Quantized Softmax in Attention

cs.LG ·2026-09-27 ·Shangzhen Zhu, Muyan Hu, Tomasz Kozlowski
similarity 0.56
Abstract

Low-precision Transformer systems increasingly quantize attention matrix multiplications, while softmax often remains at higher precision. During pretraining, an approximate softmax changes the gradients that train the model as well as its forward computation. We study this interaction with K-interval attention, which approximates the exponential using K+1 grid values. We vary per-row grid calibration, interpolation versus hard rounding, and the placement of a straight-through surrogate relative to normalization. We derive the corresponding backward rules, including calibration derivatives, and compare these choices in pretraining experiments matched on model, data, and optimizer. Detaching the row extrema leaves the forward computation unchanged but produces a delayed increase in validation loss. With hard rounding at K=4, min-max calibration and a pre-normalization surrogate incur a large loss gap; changing either choice substantially reduces it. At 124M parameters and 2.5B training tokens, fixed-window calibration with a post-normalization surrogate yields a validation loss gap of +0.019 nats relative to softmax at K=4, and with a pre-normalization surrogate yields +0.004 nats at K=16.

0.29