CS Paper Radar

ReCIM-HD: A 40 nm On-Device Learning Accelerator with Hyperdimensional Computing via Importance-Based Hybrid Digital-ReRAM CIM

Keming Fan, Chang Eun Song, Soumil Jain, Weihong Xu, Gopabandhu Hota, Haichao Yang, Leo Liu, Meng-Fan Chang, Carlos H. Diaz, Gert Cauwenberghs, Tajana Rosing, Mingu Kang

cs.AR cs.ET ·submitted 2026-11-18 07:13 UTC · v1

Abstract

ReCIM-HD is an on-device learning (ODL) accelerator that integrates gradient-free hyperdimensional computing (HDC) with resistive RAM (ReRAM)-based analog compute-in-memory (CIM). ReCIM-HD introduces three key techniques: (1) ultra-low-power HDC-based edge ODL without costly back-propagation operations; (2) non-volatile ReRAM-based storage for class hypervectors and CIM similarity search, enabling energy-efficient inference and power-gating during idle periods without data loss; and (3) a hybrid digital-analog CIM inference flow that protects a small accuracy-critical subset digitally to preserve accuracy. Additionally, it employs a Kronecker HD encoder (KE) to reduce encoding overhead and a customized instruction set architecture (ISA) to support flexible programmability. Fabricated in 40 nm, ReCIM-HD achieves 44.17 TOPS/W (hybrid mode) and 75.8 TOPS/W (ReRAM CIM mode), delivering up to 20.1x higher energy efficiency than the state-of-the-art accelerator.

Comment
ESSERC'26

Closest papers

Nearest neighbours by meaning across the whole index.

VARA: A Voltage-Aware ReRAM-Based Accelerator for Energy-Efficient Computing

cs.AR ·2026-08-31 ·Peng Dang, Yintao He, Huawei Li
similarity 0.66
Abstract

ReRAM-based in-memory computing (IMC) architectures are widely regarded as a promising approach to alleviating the computational bottleneck of conventional architectures. Since ReRAM crossbars perform matrix-vector multiplication (MVM) in the analog domain, their computational energy consumption is highly dependent on weight and activation distributions. However, most existing ReRAM accelerators focus primarily on weight optimization while paying limited attention to the impact of activations on computational energy consumption, leaving the energy-saving potential of activation sparsity largely underexploited. In this paper, we propose a voltage-aware ReRAM-based accelerator (VARA), along with its accompanying design methodology. Specifically, we first introduce a voltage-aware training (VAT) algorithm that incorporates a preset threshold into the activation function to steer the activation distribution toward zero values, thereby enhancing activation sparsity. Building upon this, we further propose a co-zero activation reordering (CAR) scheme for crossbar-level computation skipping. CAR clusters activation dimensions based on their co-zero correlations and consistently reorders both the activation matrix and its corresponding weights. This process consolidates scattered zero activations into contiguous zero-valued regions to maximize the benefits of crossbar-level computation skipping. Extensive experimental results demonstrate that, with only marginal accuracy loss, VARA reduces the average total system energy consumption by 60.12\% and improves the average system energy efficiency by 2.68$\times$ compared to the baseline, outperforming existing state-of-the-art accelerators for sparse-activation optimization.

0.24

Update Disturbance-Resilient Analog ReRAM Crossbar Arrays for In-Memory Deep Learning Accelerators

cs.ET ·2026-08-26 ·Wooseok Choi, Tommaso Stecconi, Donato Francesco Falcone, Matteo Galetta, Victoria Clerico +12 more
publishedhighly cited similarity 0.65
Abstract

Resistive memory (ReRAM) technologies with crossbar array architectures hold significant potential for analog AI accelerator hardware, enabling both in-memory inference and training. Recent developments have successfully demonstrated inference acceleration by offloading compute-heavy training workloads to off-chip digital processors. However, in-memory acceleration of training algorithms is crucial for more sustainable and power-efficient AI, but still in an early stage of research. This study addresses in-memory training acceleration using analog ReRAM arrays, focusing on a key challenge during fully parallel weight updates: disturbances of the weight values in cross-point devices. A ReRAM device solution is presented on 350 nm silicon technology, utilizing a resistive switching conductive metal oxide (CMO) formed on a nanoscale conductive filament within a HfOx layer. The devices not only exhibit 60 ns fast, non-volatile analog switching, but also demonstrates outstanding resilience to update disturbances, enduring over 100k pulses. The disturbance tolerance of the ReRAM is analyzed using COMSOL Multiphysics simulations, modeling the filament-induced thermoelectric energy concentration that results in a highly nonlinear device responses to input voltage amplitudes. Disturbance-free parallel weight mapping is also demonstrated on the back-end-of-line integrated ReRAM array chip. Finally, comprehensive hardware-aware neural network simulations validate the potential of our ReRAM for in-memory deep learning accelerators capable of fully parallel weight updates.

0.73

CHIPSMORE: Compute-in-Interconnect and -Memory Chiplets for Multi-Mode Multi-Request LLM Inference Acceleration

cs.AR ·2026-08-31 ·Yue Jiet Chong, Yimin Wang, Zhen Wu, Zixuan Wang, Wei Zhang +1 more
similarity 0.64
Abstract

Large language model (LLM) inference exhibits substantial variability across adaptation modes, context lengths, and request concurrency, creating challenges for maintaining high utilization, memory efficiency, and scalable performance on compute-in-memory (CIM) accelerators. This paper presents CHIPSMORE, a multi-mode and multi-request LLM inference accelerator that integrates compute-in-interconnect and CIM to support both base-mode and low-rank adaptation (LoRA) inference under diverse workloads. CHIPSMORE employs heterogeneous processing elements consisting of resistive RAM analog compute-in-memory (RRAM-ACIM) and static RAM digital compute-in-memory (SRAM-DCIM) interconnected through a programmable Inter-PE computational network (IPCN). A composable hierarchical key-value (KV) memory scheme dynamically allocates router scratchpad, SRAM-DCIM, and embedded DRAM (eDRAM) resources according to workload requirements, enabling scalable support for long-context and batched inference. Furthermore, a non-replicated multi-request execution pipeline exploits request-level parallelism without duplicating pretrained weights, while a state-aware resource reconfiguration mechanism selectively retains runtime states and power-gates inactive resources to improve energy efficiency. Evaluation using cycle-accurate hardware-software co-simulation demonstrates that CHIPSMORE effectively sustains high throughput across varying model sizes, context lengths, and batch sizes while maintaining favorable power scaling. Compared with Nvidia H100, CHIPSMORE achieves up to $2.38\times$ higher throughput and $27\times$ higher energy efficiency on Mistral-7B inference while eliminating weight replication for multi-request serving.

0.26

Enabling Retraining-Free Accurate Inference in Analog Compute in Memory Accelerators

cs.AR cs.LG ·2026-11-05 ·George Karfakis, Puneet Gupta
similarity 0.64
Abstract · 21 pages, 18 figures, 11 tables

Analog compute-in-memory (CIM) accelerators compute matrix-vector products directly inside memory arrays, eliminating weight movement and promising order-of-magnitude gains in inference efficiency. However, converter and device errors make pretrained models unusable on these arrays, and hardware-aware retraining is costly. We enable retraining-free, accurate inference of pretrained models on simple analog arrays with low-cost, shared calibration. Our key observation is that analog error depends on how each layer is represented on the array, and that this representation can be changed offline without changing the computation. We center the inputs and apply Hadamard rotations designed for analog arrays, which keep shared reference errors spread and confine input mixing to each array. Across CNNs, vision transformers and LLMs up to 14B parameters on PCM and ReRAM, the method brings vision models and larger LLMs within a few points of floating-point accuracy and matches or approaches published hardware-aware training without training any weights. On ReRAM with 6-bit ADCs, it restores ViT-B/16 from 37.4% to 82.9% and Phi-4 from 27.0% to 72.2%, both within 2.2 points of floating-point accuracy.

0.25

You Only Charge Once 2.0 : A End-to-End Analog Computing-in-Memory Architecture with Reconfigurable Switched Capacitors

cs.AR ·2026-08-11 ·Zihao Xuan, Yewen Li, Jia Chen, Wei Xuan, Xiao Huo +1 more
similarity 0.62
Abstract · 13 pages, 19 figures

Analog Computing-in-Memory (ACiM) accelerates deep neural networks by keeping weights inside memory arrays and executing dot products in the analog domain. However, modern ACiM accelerators are often limited by the "ADC wall": analog-to-digital converters consume a large fraction of energy and area, while bit-sliced execution repeatedly invokes these converters. Existing designs reduce this cost with low-resolution readout or time multiplexing, but they either lose output fidelity or introduce serialization overhead. Charge-CIM addresses this bottleneck by using switched-capacitor charge redistribution as a unified computing and conversion substrate. The same capacitor fabric performs input conversion, analog MAC, weighted shift-and-add, and readout quantization, reducing both standalone converter overhead and intermediate ADC invocations. A differential readout path further combines paired partial sums during ADC quantization, providing a highly compact and energy-efficient solution for array integration. With dataflow architecture support, we evaluated Charge-CIM on a suite of DNN benchmarks, from CNNs to Transformer models, and experimental results show that Charge-CIM reduces ADC energy by 91.7% under our evaluation setup and improves energy efficiency by 2.7x and throughput by 2.0x compared to the state-of-the-art charge-domain CIM accelerator.

0.10

ReSAFT: An Efficient Stuck-at Fault-Tolerant Scheme for ReRAM-based Process-in-Memory Accelerators

cs.AR ·2026-10-07 ·Aniseh Dorostkar, Hamed Farbeh, Hamid R. Zarandi
publishedhighly cited similarity 0.62
Abstract

Analog ReRAM-based process-in-memory (PIM) accelerators provide high parallelism and energy efficiency for deep convolutional neural networks (CNNs) inference. However, their susceptibility to permanent faults, such as stuck-at high (SaH) and stuck-at low (SaL) resistance states, poses a major challenge by permanently corrupting the CNN weights mapped to conductance values of ReRAM cells and degrading inference accuracy, which leads to system unreliability in safety-critical applications. In this paper, we propose a fault-tolerant scheme for analog ReRAM-based PIM accelerators to tackle stuck-at faults (SAFs) with minimal redundancy overhead to recover classification accuracy degradation. The proposed scheme contains a redundancy-based hardware solution alongside fault-aware mapping method for ensuring reliable analog computation in ReRAM crossbar. We analyze the impact of varying number of redundant rows and columns on accuracy and design metrics. Subsequently, a multi-objective optimization (MOO) problem is formulated and solved to efficiently determine the number of redundant rows and columns, considering trade-offs among various design metrics. Furthermore, a fault-aware weight mapping is proposed for dual-crossbar structures to further compensate for the accuracy degradation caused by SAFs. Simulation results show that, for the SimpleNet model using the MNIST dataset, the inference accuracy is recovered by approximately 22.39%, on average, across four configurations of optimal solutions, each offering a trade-off between reliability and area, energy consumption, and latency overheads. The mean-time-tofailure (MTTF) improves by about 61x on average compared to the baseline. These selected configurations also reduce energy and area overheads by 32%, on average, in comparison to row-only and column-only configurations.

0.56

FlexSpIM: An Event-Based Digital Compute-In-Memory Accelerator with Flexible Operand Resolution and Layer-Wise Hybrid Stationarity

cs.AR ·2026-09-08 ·Nicolas Chauvaux, Adrian Kneip, Charlotte Frenkel
similarity 0.61
Abstract · 14 pages, 17 figures, 2 tables

Compute-in-memory (CIM) accelerators for spiking neural networks (SNNs) offer a promising solution for achieving $μ$s-level inference latency and ultra-low energy in edge vision applications. However, their limited flexibility at both circuit and system levels restricts their deployment across diverse workloads. This work introduces FlexSpIM, a digital CIM architecture supporting arbitrary operand resolution and shape within a unified storage for weights and neuron states (i.e., membrane potentials). These circuit-level capabilities enable a layer-level hybrid weight- and output-stationary dataflow, maximizing operand reuse and reducing costly on- and off-chip data movement during SNN execution. Measurement results from a fabricated FlexSpIM prototype in 40-nm CMOS demonstrate competitive 1-bit-normalized energy efficiency and higher throughput compared with prior fixed-precision digital CIM-based SNN accelerators, while providing bitwise resolution reconfiguration. Evaluated on the IBM DVS gesture dataset, FlexSpIM achieves 95.8% accuracy while enabling up to 45% energy and 52% latency reductions in large-scale systems compared with fixed stationarity approaches.

0.13

Efficient Reconfigurable Architectures for Deep Learning

cs.AR ·2026-10-31 ·Endri Taka
hot direction similarity 0.60
Abstract · Ph.D. dissertation, Department of Electrical and Computer Engineering, The University of Texas at Austin, 2026

The growing computational demands of deep learning (DL) have driven AI-optimized reconfigurable devices, such as the AMD Versal AI Engines (AIEs), the Intel Stratix 10 NX Tensor Blocks (TBs), and the AMD Ryzen AI NPUs. Their heterogeneous resources and novel dataflow models make efficient exploitation nontrivial, and FPGAs lack native support for structured sparsity. This dissertation optimizes dense general matrix multiplication (GEMM), the dominant DL kernel, on these devices, proposes FPGA architectural enhancements for structured sparsity, and extends the techniques to AMD Ryzen AI NPUs. First, MaxEVA optimizes GEMM on Versal AIEs, achieving up to 2.19$\times$ higher throughput and 20.4% higher energy efficiency than the state of the art. It is then extended to arbitrary matrix sizes, and a systematic framework is proposed for the Stratix 10 NX TBs. Both frameworks reach state-of-the-art int8 throughput of up to 77 and 68 TOPS, and energy efficiency of up to 0.94 and 1.35 TOPS/W, on Versal and Stratix, respectively. Next, Systolic Sparse Tensor slices (SSTs) are proposed as in-fabric hard blocks supporting dense, 2:4, 1:4, and a new 1:3 sparsity level. SST-based GEMM accelerators achieve up to 5$\times$ higher frequency and 10.9$\times$ lower area than conventional FPGA logic, and on sparse ViT and CNN models SSTs deliver up to 3.52$\times$ speedup over dense in-fabric acceleration with up to 13.3% area increase. Finally, a common systematic methodology is proposed to optimize GEMM across the XDNA and XDNA2 AMD NPUs, reaching state-of-the-art performance of up to 6.76 and 38.05 TOPS (int8) and 3.14 and 14.71 TOPS (bf16), respectively.

0.24