CS Paper Radar

ReSAFT: An Efficient Stuck-at Fault-Tolerant Scheme for ReRAM-based Process-in-Memory Accelerators

Aniseh Dorostkar, Hamed Farbeh, Hamid R. Zarandi

cs.AR ·submitted 2026-10-07 12:56 UTC · v1
publishedhighly cited

Abstract

Analog ReRAM-based process-in-memory (PIM) accelerators provide high parallelism and energy efficiency for deep convolutional neural networks (CNNs) inference. However, their susceptibility to permanent faults, such as stuck-at high (SaH) and stuck-at low (SaL) resistance states, poses a major challenge by permanently corrupting the CNN weights mapped to conductance values of ReRAM cells and degrading inference accuracy, which leads to system unreliability in safety-critical applications. In this paper, we propose a fault-tolerant scheme for analog ReRAM-based PIM accelerators to tackle stuck-at faults (SAFs) with minimal redundancy overhead to recover classification accuracy degradation. The proposed scheme contains a redundancy-based hardware solution alongside fault-aware mapping method for ensuring reliable analog computation in ReRAM crossbar. We analyze the impact of varying number of redundant rows and columns on accuracy and design metrics. Subsequently, a multi-objective optimization (MOO) problem is formulated and solved to efficiently determine the number of redundant rows and columns, considering trade-offs among various design metrics. Furthermore, a fault-aware weight mapping is proposed for dual-crossbar structures to further compensate for the accuracy degradation caused by SAFs. Simulation results show that, for the SimpleNet model using the MNIST dataset, the inference accuracy is recovered by approximately 22.39%, on average, across four configurations of optimal solutions, each offering a trade-off between reliability and area, energy consumption, and latency overheads. The mean-time-tofailure (MTTF) improves by about 61x on average compared to the baseline. These selected configurations also reduce energy and area overheads by 32%, on average, in comparison to row-only and column-only configurations.

Journal ref
Dorostkar, Aniseh, Hamed Farbeh, and Hamid R. Zarandi. "ReSAFT: An efficient stuck-at fault-tolerant scheme for ReRAM-based process-in-memory accelerators." Future Generation Computer Systems 185 (2026): 108685
DOI
10.1016/j.future.2026.108685

Closest papers

Nearest neighbours by meaning across the whole index.

An Empirical Fault Vulnerability Exploration of ReRAM-based Process-in-Memory CNN Accelerators

cs.AR cs.AI ·2026-10-04 ·Aniseh Dorostkar, Hamed Farbeh, Hamid R. Zarandi
top venuehighly cited similarity 0.85
Abstract

Resistive random-access memory (ReRAM)-based Processing-in-Memory (PIM) accelerator is a promising platform for processing massively memory intensive matrix-vector multiplications of neural networks in parallel domain, due to its capability of analog computation, ultra-high density, near-zero leakage current, and non-volatility. Despite many advantages, ReRAM-based accelerators are highly error-prone due to limitations of technology fabrication that lead to process variations and defects. These limitations degrade the accuracy of Deep Convolutional Neural Networks (Deep CNNs) running on PIM accelerators. While these CNNs accelerators are widely deployed in safety-critical systems, their vulnerability to fault is not well explored. In this paper, we have developed a fault injection framework to investigate the vulnerability of large-scale CNNs at both software- and hardware-level of inference phases. Faulty ReRAM devices are another reliability challenges due to significant degradation of classification accuracy when CNN parameters are mapped to the accelerators. To investigate this challenge, we map the CNN learning parameter to the ReRAM crossbar and inject faults into crossbar arrays. The proposed framework analyzes the impact of stuck-at high (SaH) and stuck-at low (SaL) fault models on different layers and locations of CNN learning parameters. By performing extensive fault injections, we illustrate that the vulnerability behavior of ReRAM-based PIM accelerator for CNNs is greatly impressible to the types and depth of layers, the location of the learning parameter in every layer, and the value and types of faults. Our observations show that different models have different vulnerabilities to faults. Specifically, we show that SaL further reduces classification accuracy than SaH.

0.56

VARA: A Voltage-Aware ReRAM-Based Accelerator for Energy-Efficient Computing

cs.AR ·2026-08-31 ·Peng Dang, Yintao He, Huawei Li
similarity 0.69
Abstract

ReRAM-based in-memory computing (IMC) architectures are widely regarded as a promising approach to alleviating the computational bottleneck of conventional architectures. Since ReRAM crossbars perform matrix-vector multiplication (MVM) in the analog domain, their computational energy consumption is highly dependent on weight and activation distributions. However, most existing ReRAM accelerators focus primarily on weight optimization while paying limited attention to the impact of activations on computational energy consumption, leaving the energy-saving potential of activation sparsity largely underexploited. In this paper, we propose a voltage-aware ReRAM-based accelerator (VARA), along with its accompanying design methodology. Specifically, we first introduce a voltage-aware training (VAT) algorithm that incorporates a preset threshold into the activation function to steer the activation distribution toward zero values, thereby enhancing activation sparsity. Building upon this, we further propose a co-zero activation reordering (CAR) scheme for crossbar-level computation skipping. CAR clusters activation dimensions based on their co-zero correlations and consistently reorders both the activation matrix and its corresponding weights. This process consolidates scattered zero activations into contiguous zero-valued regions to maximize the benefits of crossbar-level computation skipping. Extensive experimental results demonstrate that, with only marginal accuracy loss, VARA reduces the average total system energy consumption by 60.12\% and improves the average system energy efficiency by 2.68$\times$ compared to the baseline, outperforming existing state-of-the-art accelerators for sparse-activation optimization.

0.24

Enabling Retraining-Free Accurate Inference in Analog Compute in Memory Accelerators

cs.AR cs.LG ·2026-11-05 ·George Karfakis, Puneet Gupta
similarity 0.64
Abstract · 21 pages, 18 figures, 11 tables

Analog compute-in-memory (CIM) accelerators compute matrix-vector products directly inside memory arrays, eliminating weight movement and promising order-of-magnitude gains in inference efficiency. However, converter and device errors make pretrained models unusable on these arrays, and hardware-aware retraining is costly. We enable retraining-free, accurate inference of pretrained models on simple analog arrays with low-cost, shared calibration. Our key observation is that analog error depends on how each layer is represented on the array, and that this representation can be changed offline without changing the computation. We center the inputs and apply Hadamard rotations designed for analog arrays, which keep shared reference errors spread and confine input mixing to each array. Across CNNs, vision transformers and LLMs up to 14B parameters on PCM and ReRAM, the method brings vision models and larger LLMs within a few points of floating-point accuracy and matches or approaches published hardware-aware training without training any weights. On ReRAM with 6-bit ADCs, it restores ViT-B/16 from 37.4% to 82.9% and Phi-4 from 27.0% to 72.2%, both within 2.2 points of floating-point accuracy.

0.25

RobustNCL: Robustifying Neuromorphic Continual Learning under Transient Faults with Lightweight Detect-and-Cure Strategy

cs.NE cs.AIcs.LG ·2026-10-22 ·Rachmad Vidya Wicaksana Putra, Shuochen Zhou, Muhammad Shafique
hot direction similarity 0.64
Abstract · 12 pages, 6 figures, 3 tables

In neural networks, continual learning (CL) is a prominent approach for enabling deployed systems to adapt to dynamic operational environments by effectively learning from new unseen data at runtime. Recently, the neuromorphic continual learning (NCL) concept has emerged as an energy-efficient alternative to CL by leveraging sparse event-based operations. However, NCL performance can be undermined by transient faults in the hardware platforms, which may come from high-energy particle strikes at any time. Currently, NCL reliability under transient faults has not been studied, and hence the corresponding fault-tolerance techniques remain unexplored. To address this, we propose a novel RobustNCL framework to improve NCL reliability in the presence of transient faults in the DRAM-based off-chip memory of hardware platforms through a lightweight detect-and-cure strategy. Specifically, it first monitors the presence of faults during weight data access from off-chip memory, and then cures the accessed weights if anomalous signatures are detected. It provides three curing variants: replacement with zero, min/max value, and most-probable value from the original/clean weight distribution. To support this, the weight curing values are stored in the radiation-hardened memory. Experimental results show that, in the presence of high fault rates (e.g., 5x10^{-4} for memory replay), RobustNCL maintains high accuracy close to the accuracy of fault-free models (i.e., within -0.5% accuracy for the best RobustNCL variant) and significantly improves accuracy from the baseline without fault mitigation across different NCL methods and datasets (i.e., Split MNIST, Split Fashion-MNIST, Split CIFAR-10, and Split CIFAR-100), while incurring negligible latency and energy overheads. These results highlight that our RobustNCL framework is a promising approach for enabling reliable and energy-efficient NCL systems.

0.30

Update Disturbance-Resilient Analog ReRAM Crossbar Arrays for In-Memory Deep Learning Accelerators

cs.ET ·2026-08-26 ·Wooseok Choi, Tommaso Stecconi, Donato Francesco Falcone, Matteo Galetta, Victoria Clerico +12 more
publishedhighly cited similarity 0.64
Abstract

Resistive memory (ReRAM) technologies with crossbar array architectures hold significant potential for analog AI accelerator hardware, enabling both in-memory inference and training. Recent developments have successfully demonstrated inference acceleration by offloading compute-heavy training workloads to off-chip digital processors. However, in-memory acceleration of training algorithms is crucial for more sustainable and power-efficient AI, but still in an early stage of research. This study addresses in-memory training acceleration using analog ReRAM arrays, focusing on a key challenge during fully parallel weight updates: disturbances of the weight values in cross-point devices. A ReRAM device solution is presented on 350 nm silicon technology, utilizing a resistive switching conductive metal oxide (CMO) formed on a nanoscale conductive filament within a HfOx layer. The devices not only exhibit 60 ns fast, non-volatile analog switching, but also demonstrates outstanding resilience to update disturbances, enduring over 100k pulses. The disturbance tolerance of the ReRAM is analyzed using COMSOL Multiphysics simulations, modeling the filament-induced thermoelectric energy concentration that results in a highly nonlinear device responses to input voltage amplitudes. Disturbance-free parallel weight mapping is also demonstrated on the back-end-of-line integrated ReRAM array chip. Finally, comprehensive hardware-aware neural network simulations validate the potential of our ReRAM for in-memory deep learning accelerators capable of fully parallel weight updates.

0.73

A Radiation-Hardened, Fault-Aware Quantized Neural Network That Self-Heals

cs.LG astro-ph.IMhep-exnucl-ex+1 ·2026-10-20 ·Peter Xiangyuan Ma, Joshua S. Bloom
similarity 0.63
Abstract · 22 pages, 4 figures, 11 tables

Deep learning (DL) models are increasingly being deployed into radiation-challenging environments in spacecraft, particle accelerators, and, soon, space-based data centers. Instantiated as a learned orchestration of numbers stored in persistent memory, models are susceptible to continual degradation as high-energy particles corrupt data. At inference time, new data passed through the network fundamentally break the off-line assumptions and guarantees of a static model determined during training. To preserve the quality and efficacy of the models, fault tolerance against bit flips is a clear objective. In this work we developed a runtime method for repairing the quantized weights of neural networks (NNs) after bit flips on commodity, commercial off-the-shelf (COTS) hardware, without storing extra replicas. Our work extends the well-established Fault-Aware Training (FAT) paradigm by adding an alignment penalty to concentrate undamaged activations and weights into a low-rank subspace, and we then reconstruct flagged corrupted coordinates from the uncorrupted survivors. We call this method {\it Projection Healing} and apply it to six regression benchmarks on quantized NNs. Holding a FAT checkpoint fixed and toggling only the runtime heal gives a further ${\sim}23\%$ reduction in the native-unit excess integral. Across those datasets the method extends the operational scrub interval by a median of $2.04\times$ at a $+5\%$ RMSE degradation and $1.96\times$ at $+50\%$, compared with $1.62\times$ and $1.07\times$ for classical Single Error Correction, Double Error Detection (SECDED). This introduces a new path towards designing resilient data-driven models, complementing established hardware redundancy, ECC, and FAT-based techniques.

0.25

Carry-Through Checksum: A Lightweight Fault-Detection for CNN Inference at the Edge

cs.AR cs.LG ·2026-09-15 ·Kyrylo Nazarevych, Mohammad Hasan Ahmadilivani, Krister Kaldre, Davide Bertozzi, Jaan Raik
publishedhot direction similarity 0.62
Abstract · Accepted at ATS'26. 6 pages, 3 figs and 3 tables

Convolutional Neural Networks (CNNs) are increasingly deployed in safety-critical edge applications, where soft errors can silently corrupt inference outputs and lead to unsafe decisions. Such applications typically rely on resource-constrained embedded GPUs, requiring fault detection and mitigation techniques that add minimal compute, memory, and latency overhead while integrating seamlessly with the standard GPU inference pipeline. Existing algorithm-based fault tolerance techniques rely on matrix augmentation and per-operation checksum verification, imposing substantial overhead that is prohibitive for CNN inference on embedded GPUs. In this work, we propose carry-through checksum, a fundamentally new scheme for soft-error detection in CNN inference on embedded GPUs. The method embeds dedicated carry-through filters into the convolutional layers, which compute a checksum from the CNN's own operations and propagate it through inference, enabling end-to-end error detection with a single output verification. Experimental results on multiple CNN architectures show that the proposed method detects 95.86% and 86.56% of critical faults for FP32 and FP16, respectively, at almost no additional per-image overhead. Detected faults are mitigated through re-execution, incurring only 2.27% run-time overhead across the entire test set on an NVIDIA Jetson Orin NX GPU.

0.42

Energy-Efficient Memristor Accelerator for Depression Detection with a CNN-LSTM Hybrid Model

cs.AR ·2026-10-29 ·Jiaqi Liu, Yun Yu, Fenglin Xi, Shenjian Zhang, Shenghao Liao +5 more
hot direction similarity 0.61
Abstract

Early screening of depression requires efficient analysis of audio and speech data, while conventional CPU and GPU platforms incur high latency and energy consumption for CNN-LSTM inference. To address this challenge, we propose a unified resistive RAM (ReRAM) processing-in-memory accelerator for a CNN-LSTM attention workload. The architecture integrates convolutional, recurrent, attention, and multi-layer perceptron (MLP) stages within a crossbar-based framework, reducing intermediate data movement between spatial and temporal branches. CNN operations are mapped through im2col-based vectorization, while LSTM gate computations are reformulated using concatenated input-state vectors and mapped onto ReRAM crossbars. We further provide module-level workload breakdown, parameter sensitivity analysis, and matched-workload context against representative ReRAM/PIM accelerators. Experimental results show 32.1 times and 9.3 times latency reduction over CPU and GPU baselines, respectively, with about 160 times and 140 times energy reduction. Simplified weight-perturbation tests characterize ASLF sensitivity in an untrained pipeline with synthetic spectrogram-shaped inputs. Task-level prediction accuracy and robustness remain to be evaluated.

0.34