CS Paper Radar

RobustNCL: Robustifying Neuromorphic Continual Learning under Transient Faults with Lightweight Detect-and-Cure Strategy

Rachmad Vidya Wicaksana Putra, Shuochen Zhou, Muhammad Shafique

cs.NE cs.AIcs.LG ·submitted 2026-10-22 22:00 UTC · v1
hot direction

Abstract

In neural networks, continual learning (CL) is a prominent approach for enabling deployed systems to adapt to dynamic operational environments by effectively learning from new unseen data at runtime. Recently, the neuromorphic continual learning (NCL) concept has emerged as an energy-efficient alternative to CL by leveraging sparse event-based operations. However, NCL performance can be undermined by transient faults in the hardware platforms, which may come from high-energy particle strikes at any time. Currently, NCL reliability under transient faults has not been studied, and hence the corresponding fault-tolerance techniques remain unexplored. To address this, we propose a novel RobustNCL framework to improve NCL reliability in the presence of transient faults in the DRAM-based off-chip memory of hardware platforms through a lightweight detect-and-cure strategy. Specifically, it first monitors the presence of faults during weight data access from off-chip memory, and then cures the accessed weights if anomalous signatures are detected. It provides three curing variants: replacement with zero, min/max value, and most-probable value from the original/clean weight distribution. To support this, the weight curing values are stored in the radiation-hardened memory. Experimental results show that, in the presence of high fault rates (e.g., 5x10^{-4} for memory replay), RobustNCL maintains high accuracy close to the accuracy of fault-free models (i.e., within -0.5% accuracy for the best RobustNCL variant) and significantly improves accuracy from the baseline without fault mitigation across different NCL methods and datasets (i.e., Split MNIST, Split Fashion-MNIST, Split CIFAR-10, and Split CIFAR-100), while incurring negligible latency and energy overheads. These results highlight that our RobustNCL framework is a promising approach for enabling reliable and energy-efficient NCL systems.

Comment
12 pages, 6 figures, 3 tables

Closest papers

Nearest neighbours by meaning across the whole index.

ENCL: Enabling Efficient Neuromorphic Continual Learning with Local Learning Rule and Sub-Network Freezing Strategy

cs.NE cs.AIcs.LG ·2026-10-22 ·Rachmad Vidya Wicaksana Putra, Shuochen Zhou, Hassan Raza, Muhammad Shafique
similarity 0.71
Abstract · 9 pages, 6 figures

Continual learning (CL) in neural networks is a promising learning approach for updating the knowledge of deployed systems based on new data encountered at run time, that have not been learned during the offline training phase. To enable their power/energy-efficient CL processing, neuromorphic continual learning (NCL) concept with sparse event-based operations have recently been introduced. However, state-of-the-art NCL methods typically employ the memory-hungry data/experience replay, coupled with costly global learning rule (i.e., backpropagation-based surrogate gradient). To address these limitations, we propose ENCL, a novel methodology that enables efficient NCL by employing a lightweight local learning rule and sub-network freezing strategy. ENCL leverages the temporally- and spatially-local learning rule to perform efficient credit assignment for training new tasks, alleviating the expensive cost of global learning rule. ENCL also employs a sub-network freezing strategy based on the given tasks to avoid the needs for network architecture expansion, hence further improving the efficiency and scalability of the NCL training process. To efficiently support this, we train each task with a small number of epochs as well as adjusted learning rate and timestep. Experiment results on task-incremental learning (TIL) scenario show that, our ENCL consistently achieves strong performance across different datasets as compared to state-of-the-art works. Specifically, ENCL achieves competitive accuracy comparable to that of the state-of-the-art data/experience replay, while reducing memory cost by up to 88%, NCL training time by up to 51%, average power consumption by up to 40%, and energy consumption by up to 65% across different benchmarking datasets (i.e., Split MNIST, Split Fashion MNIST, Split CIFAR-10, and Split CIFAR-100).

0.18

Migrate Computation, Not Data: Fault Recovery in Neuromorphic Many-Core Systems

cs.NE ·2026-10-19 ·Muyang Cao, Di Yu, Peiling Zhu, Linshan Jiang, Xin Du +2 more
similarity 0.69
Abstract

As neuromorphic systems scale to thousands of near-memory cores, aging-induced permanent faults in neuron-update datapaths become an important obstacle to long-term deployment. Existing online recovery methods typically retire a faulty core and migrate its neurons, along with their weights and membrane states, to healthy cores. This whole-core treatment incurs high recovery traffic and makes recovery depend on scarce destinations; at high utilization, there may be enough surviving compute capacity but insufficient free storage to copy the affected neuron context. This paper presents SpikeRelay, an online recovery framework for diagnosed compute-unit faults. SpikeRelay exploits the fact that, in many neuromorphic cores, the compute datapath, local SRAM, and router are distinct modules: a compute fault need not destroy stored weights and states or disconnect the core from the NoC. Instead of retiring a faulty core and migrating its neuron data, SpikeRelay converts the faulty core into a storage-and-forwarding node while offloading neuron-update computation to a healthy rescue core. This decoupling of storage and computation eliminates recovery-time data migration and greatly reduces spare-SRAM requirements. Consequently, SpikeRelay sustains 100\% recovery at 92.2\% SRAM utilization and a 50\% fault rate, whereas the best baseline achieves only 22.1\%.

0.26

A Radiation-Hardened, Fault-Aware Quantized Neural Network That Self-Heals

cs.LG astro-ph.IMhep-exnucl-ex+1 ·2026-10-20 ·Peter Xiangyuan Ma, Joshua S. Bloom
similarity 0.69
Abstract · 22 pages, 4 figures, 11 tables

Deep learning (DL) models are increasingly being deployed into radiation-challenging environments in spacecraft, particle accelerators, and, soon, space-based data centers. Instantiated as a learned orchestration of numbers stored in persistent memory, models are susceptible to continual degradation as high-energy particles corrupt data. At inference time, new data passed through the network fundamentally break the off-line assumptions and guarantees of a static model determined during training. To preserve the quality and efficacy of the models, fault tolerance against bit flips is a clear objective. In this work we developed a runtime method for repairing the quantized weights of neural networks (NNs) after bit flips on commodity, commercial off-the-shelf (COTS) hardware, without storing extra replicas. Our work extends the well-established Fault-Aware Training (FAT) paradigm by adding an alignment penalty to concentrate undamaged activations and weights into a low-rank subspace, and we then reconstruct flagged corrupted coordinates from the uncorrupted survivors. We call this method {\it Projection Healing} and apply it to six regression benchmarks on quantized NNs. Holding a FAT checkpoint fixed and toggling only the runtime heal gives a further ${\sim}23\%$ reduction in the native-unit excess integral. Across those datasets the method extends the operational scrub interval by a median of $2.04\times$ at a $+5\%$ RMSE degradation and $1.96\times$ at $+50\%$, compared with $1.62\times$ and $1.07\times$ for classical Single Error Correction, Double Error Detection (SECDED). This introduces a new path towards designing resilient data-driven models, complementing established hardware redundancy, ECC, and FAT-based techniques.

0.25

Parameter Efficient Continual Learning for Sparse Event-Based Transformers

cs.CV ·2026-08-27 ·Vaishnavi Nagabhushana, Kartikay Agrawal, Ayon Borthakur
similarity 0.65
Abstract

Robotic and edge intelligence systems operate in dynamic environments where data arrives continuously, requiring models to adapt while preserving previously learned knowledge under strict memory and energy constraints. While parameter-efficient fine-tuning has shown promise for continual learning with vision transformers, conventional architectures rely on dense computation and remain costly for real-world deployment. Sparse event-based vision transformers provide energy-efficient event-driven computation, yet their continual learning capabilities remain largely unexplored. We here introduce sLoTh, a parameter-efficient continual learning framework for pretrained sparse event-based (spiking) vision transformers. sLoTh freezes the backbone and restricts plasticity to scalable-efficient low-rank attention updates (seLoRA) and shared neuronal threshold modulation, enabling adaptation without replay buffers by updating less than 1% of model parameters. Experiments across CIFAR-100, Tiny-ImageNet, ImageNet-100, and ImageNet-R with up to 100 tasks demonstrate competitive rehearsal-free performance in class-incremental learning and online continual learning, while enabling approximately 6.5x lower energy consumption than conventional dense vision transformers.

0.19

ReSAFT: An Efficient Stuck-at Fault-Tolerant Scheme for ReRAM-based Process-in-Memory Accelerators

cs.AR ·2026-10-07 ·Aniseh Dorostkar, Hamed Farbeh, Hamid R. Zarandi
publishedhighly cited similarity 0.64
Abstract

Analog ReRAM-based process-in-memory (PIM) accelerators provide high parallelism and energy efficiency for deep convolutional neural networks (CNNs) inference. However, their susceptibility to permanent faults, such as stuck-at high (SaH) and stuck-at low (SaL) resistance states, poses a major challenge by permanently corrupting the CNN weights mapped to conductance values of ReRAM cells and degrading inference accuracy, which leads to system unreliability in safety-critical applications. In this paper, we propose a fault-tolerant scheme for analog ReRAM-based PIM accelerators to tackle stuck-at faults (SAFs) with minimal redundancy overhead to recover classification accuracy degradation. The proposed scheme contains a redundancy-based hardware solution alongside fault-aware mapping method for ensuring reliable analog computation in ReRAM crossbar. We analyze the impact of varying number of redundant rows and columns on accuracy and design metrics. Subsequently, a multi-objective optimization (MOO) problem is formulated and solved to efficiently determine the number of redundant rows and columns, considering trade-offs among various design metrics. Furthermore, a fault-aware weight mapping is proposed for dual-crossbar structures to further compensate for the accuracy degradation caused by SAFs. Simulation results show that, for the SimpleNet model using the MNIST dataset, the inference accuracy is recovered by approximately 22.39%, on average, across four configurations of optimal solutions, each offering a trade-off between reliability and area, energy consumption, and latency overheads. The mean-time-tofailure (MTTF) improves by about 61x on average compared to the baseline. These selected configurations also reduce energy and area overheads by 32%, on average, in comparison to row-only and column-only configurations.

0.57

Catastrophic Learning: A New Attack Vector on Continual Learning Networks

cs.CR ·2026-08-19 ·Benedikt Kluss, Niklas Bunzel
similarity 0.63
Abstract

Continual Learning (CL) enables deep learning models to iteratively learn from a stream of data without forgetting prior knowledge. Existing adversarial research on CL primarily aims to re-enable catastrophic forgetting, attacking stability and reducing availability. We identify a novel security flaw: data manipulated by an attacker can reduce the learnability of current or upcoming iterations. We term such manipulations learning blockers, as they attack the plasticity of CL algorithms. They are particularly harmful because they are difficult to detect during training of the current iteration, since they can target iterations whose data the model has not yet encountered. When learning blockers additionally induce catastrophic forgetting, the resulting overall degradation is what we call catastrophic learning. We formalize this scenario, define a threat model and propose six attack strategies: Label-Exchange, Tensor-Exchange, Attraction-Coincident, Attraction-Preceding, Repulsion-Coincident, and Repulsion-Preceding. The Attraction variants minimize the loss between the poisoned and the victim iteration label, pulling their representations together in feature space; the Repulsion variants maximize this loss, pushing them apart so stability mechanisms resist the required parameter shift. In the Coincident variants, the poisoned and the victim iteration coincide, using a clean reference iteration only as a label source; in the Preceding variants, the poisoned iteration precedes the victim, leaving it unlearnable due to distorted representations. We evaluate on MNIST and Split-CIFAR10 against three CL strategies - DER, ER-ACE, and iCaRL - across more than 4,480 simulations. Our results demonstrate a strong vulnerability: an adversary can selectively impede plasticity to hinder the acquisition of new knowledge, while promoting loss of prior knowledge, inducing a catastrophic learning scenario.

0.21

An Empirical Fault Vulnerability Exploration of ReRAM-based Process-in-Memory CNN Accelerators

cs.AR cs.AI ·2026-10-04 ·Aniseh Dorostkar, Hamed Farbeh, Hamid R. Zarandi
top venuehighly cited similarity 0.63
Abstract

Resistive random-access memory (ReRAM)-based Processing-in-Memory (PIM) accelerator is a promising platform for processing massively memory intensive matrix-vector multiplications of neural networks in parallel domain, due to its capability of analog computation, ultra-high density, near-zero leakage current, and non-volatility. Despite many advantages, ReRAM-based accelerators are highly error-prone due to limitations of technology fabrication that lead to process variations and defects. These limitations degrade the accuracy of Deep Convolutional Neural Networks (Deep CNNs) running on PIM accelerators. While these CNNs accelerators are widely deployed in safety-critical systems, their vulnerability to fault is not well explored. In this paper, we have developed a fault injection framework to investigate the vulnerability of large-scale CNNs at both software- and hardware-level of inference phases. Faulty ReRAM devices are another reliability challenges due to significant degradation of classification accuracy when CNN parameters are mapped to the accelerators. To investigate this challenge, we map the CNN learning parameter to the ReRAM crossbar and inject faults into crossbar arrays. The proposed framework analyzes the impact of stuck-at high (SaH) and stuck-at low (SaL) fault models on different layers and locations of CNN learning parameters. By performing extensive fault injections, we illustrate that the vulnerability behavior of ReRAM-based PIM accelerator for CNNs is greatly impressible to the types and depth of layers, the location of the learning parameter in every layer, and the value and types of faults. Our observations show that different models have different vulnerabilities to faults. Specifically, we show that SaL further reduces classification accuracy than SaH.

0.56

BARE-AI: Bit-Flip Attack Resilience in AI Hardware through Built-in Performance Monitors

cs.CR ·2026-10-06 ·Habibur Rahaman, Swastik Bhattacharya, Sanjay Das, Kanad Basu, Swarup Bhunia
similarity 0.63
Abstract

Deep Neural Networks (DNNs) are integral to many safety critical systems, yet they remain highly vulnerable to bit-flip attacks (BFAs), where a few memory level perturbations can drastically degrade accuracy. Existing defenses incur significant hardware overhead, depend on retraining, or fail against targeted flips. We propose BARE-AI, a runtime framework that detects, localizes, and mitigates BFAs during inference. BARE-AI introduces AI Performance Counters (APCs), lightweight hardware monitors in the accelerator datapath that capture per-layer activation statistics such as sparsity, entropy, kurtosis, and spectral shift. These are analyzed by the Predictive Unit for Layer Security Evaluation (PULSE), a compact detector trained offline as an ensemble of classifiers and realized on-chip as a small neural engine. For explainability and recovery, BARE-AI introduces an Activation Shift Index (ASI) for layer level fault localization and a z-score based repair that resets anomalous weights toward clean layer statistics. Across CNNs, Vision Transformers, and Large Language Models under random, targeted, adaptive, and magnitude based BFAs, BARE-AI achieves up to 98% detection accuracy on vision models and 74% to 95% on language models, restores near clean accuracy for CNNs and ViTs, and provides partial recovery for LLMs. Synthesized at 28nm, the monitoring infrastructure incurs under 3% energy, under 4% area, and about 10% latency overhead, with a configurable operating point that reduces latency overhead to about 6%. Unlike error correcting codes, whose redundancy grows with the number of tolerated flips, BARE-AI's overhead remains constant regardless of attack strength, making it attractive for resource constrained, safety critical edge applications such as autonomous systems, energy, and healthcare.

0.44