CS Paper Radar

Enabling Retraining-Free Accurate Inference in Analog Compute in Memory Accelerators

George Karfakis, Puneet Gupta

cs.AR cs.LG ·submitted 2026-11-05 20:49 UTC · v1

Abstract

Analog compute-in-memory (CIM) accelerators compute matrix-vector products directly inside memory arrays, eliminating weight movement and promising order-of-magnitude gains in inference efficiency. However, converter and device errors make pretrained models unusable on these arrays, and hardware-aware retraining is costly. We enable retraining-free, accurate inference of pretrained models on simple analog arrays with low-cost, shared calibration. Our key observation is that analog error depends on how each layer is represented on the array, and that this representation can be changed offline without changing the computation. We center the inputs and apply Hadamard rotations designed for analog arrays, which keep shared reference errors spread and confine input mixing to each array. Across CNNs, vision transformers and LLMs up to 14B parameters on PCM and ReRAM, the method brings vision models and larger LLMs within a few points of floating-point accuracy and matches or approaches published hardware-aware training without training any weights. On ReRAM with 6-bit ADCs, it restores ViT-B/16 from 37.4% to 82.9% and Phi-4 from 27.0% to 72.2%, both within 2.2 points of floating-point accuracy.

Comment
21 pages, 18 figures, 11 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Robust Parameter-Efficient LLM Adaptation on Analog Hardware

cs.LG ·2026-10-04 ·Jindan Li, Zhaoxian Wu, Tianyi Chen
published similarity 0.74
Abstract · Accepted at the NeurIPS 2026 Workshop on On-Device Intelligence: Foundation Models under Real-World Constraints (ODI 2026)

Analog in-memory computing is a promising platform for on-device execution of large language models because it performs matrix--vector multiplications (MVMs) in memory and in parallel, reducing data movement. However, limited digital-to-analog converter precision, input noise, and finite conductance states can degrade model accuracy, while full-model retraining to address these effects can be costly. We develop an optimizer-agnostic, parameter-efficient adaptation method based on Low-Rank Adaptation (LoRA), keeping the pretrained weights stored on analog arrays fixed while training the LoRA weights to adapt to downstream tasks and hardware non-idealities. Reliable adaptation requires handling errors in both forward and backward MVMs and physical weight updates. We use input reshaping to reduce input-induced MVM errors and update accumulation to retain small updates before programming them to finite-state analog devices. Across Llama-3.2-1B-Instruct and Llama-3-8B with both Muon and AdamW, input reshaping improves analog LoRA fine-tuning under noisy MVM computation. Update accumulation separately preserves sub-threshold updates and substantially improves adaptation under finite-resolution programming, including configurations with as few as 20 conductance states. Additional experiments show consistent held-out negative log-likelihood improvements across noisy analog settings.

0.36

Making Analog Training Scale: Co-Designing Mapping, Optimizer, and Converters

cs.LG cs.AR ·2026-09-29 ·Zhaoxian Wu, Tayfun Gokmen, Omobayode Fagbohungbe, T. Patrick Xiao, Tianyi Chen
similarity 0.67
Abstract

Analog in-memory computing (AIMC) offers an alternative for model training by executing matrix operations directly where weights are stored. However, scaling AIMC to train modern deep models remains an open challenge due to severe hardware non-idealities, including physical weights with finite dynamic range and write granularity, analog-digital converters with finite resolution, and noisy and asymmetric updates. Guided by the insight that gradient accumulation is sensitive to precision and rounding errors, we adopt a mixed-precision training paradigm: executing forward and backward matrix multiplications in the analog domain while computing weight gradients in the digital domain. To enable scalable training, we present a holistic system-algorithm co-design that co-optimizes weight mapping to ensure well-conditioned physical and logical weight profiles, couples a preconditioned optimizer with threshold-triggered open-loop pulsing to stabilize training trajectories, and aligns converter dynamic ranges to suppress quantization errors. Evaluated via hardware-calibrated architectural simulations calibrated with electrochemical RAM measurements, our framework scales Transformer training up to $123\text{M}$ parameters with validation loss scaling as $L\propto N^{-0.231}$, where $N$ is the parameter count, comparable to $L\propto N^{-0.238}$ for digital training.

0.47

VARA: A Voltage-Aware ReRAM-Based Accelerator for Energy-Efficient Computing

cs.AR ·2026-08-31 ·Peng Dang, Yintao He, Huawei Li
similarity 0.66
Abstract

ReRAM-based in-memory computing (IMC) architectures are widely regarded as a promising approach to alleviating the computational bottleneck of conventional architectures. Since ReRAM crossbars perform matrix-vector multiplication (MVM) in the analog domain, their computational energy consumption is highly dependent on weight and activation distributions. However, most existing ReRAM accelerators focus primarily on weight optimization while paying limited attention to the impact of activations on computational energy consumption, leaving the energy-saving potential of activation sparsity largely underexploited. In this paper, we propose a voltage-aware ReRAM-based accelerator (VARA), along with its accompanying design methodology. Specifically, we first introduce a voltage-aware training (VAT) algorithm that incorporates a preset threshold into the activation function to steer the activation distribution toward zero values, thereby enhancing activation sparsity. Building upon this, we further propose a co-zero activation reordering (CAR) scheme for crossbar-level computation skipping. CAR clusters activation dimensions based on their co-zero correlations and consistently reorders both the activation matrix and its corresponding weights. This process consolidates scattered zero activations into contiguous zero-valued regions to maximize the benefits of crossbar-level computation skipping. Extensive experimental results demonstrate that, with only marginal accuracy loss, VARA reduces the average total system energy consumption by 60.12\% and improves the average system energy efficiency by 2.68$\times$ compared to the baseline, outperforming existing state-of-the-art accelerators for sparse-activation optimization.

0.24

ReSAFT: An Efficient Stuck-at Fault-Tolerant Scheme for ReRAM-based Process-in-Memory Accelerators

cs.AR ·2026-10-07 ·Aniseh Dorostkar, Hamed Farbeh, Hamid R. Zarandi
publishedhighly cited similarity 0.64
Abstract

Analog ReRAM-based process-in-memory (PIM) accelerators provide high parallelism and energy efficiency for deep convolutional neural networks (CNNs) inference. However, their susceptibility to permanent faults, such as stuck-at high (SaH) and stuck-at low (SaL) resistance states, poses a major challenge by permanently corrupting the CNN weights mapped to conductance values of ReRAM cells and degrading inference accuracy, which leads to system unreliability in safety-critical applications. In this paper, we propose a fault-tolerant scheme for analog ReRAM-based PIM accelerators to tackle stuck-at faults (SAFs) with minimal redundancy overhead to recover classification accuracy degradation. The proposed scheme contains a redundancy-based hardware solution alongside fault-aware mapping method for ensuring reliable analog computation in ReRAM crossbar. We analyze the impact of varying number of redundant rows and columns on accuracy and design metrics. Subsequently, a multi-objective optimization (MOO) problem is formulated and solved to efficiently determine the number of redundant rows and columns, considering trade-offs among various design metrics. Furthermore, a fault-aware weight mapping is proposed for dual-crossbar structures to further compensate for the accuracy degradation caused by SAFs. Simulation results show that, for the SimpleNet model using the MNIST dataset, the inference accuracy is recovered by approximately 22.39%, on average, across four configurations of optimal solutions, each offering a trade-off between reliability and area, energy consumption, and latency overheads. The mean-time-tofailure (MTTF) improves by about 61x on average compared to the baseline. These selected configurations also reduce energy and area overheads by 32%, on average, in comparison to row-only and column-only configurations.

0.57

RACE-AIMC: Selective Inference for Heterogeneous Analog In-Memory Accelerators at the Edge

cs.ET cs.ARcs.LG ·2026-09-02 ·Osama Yousuf, Martin Lueker-Boden
theoryhot direction similarity 0.64
Abstract · 6 pages, 2 figures, 3 tables

Analog in-memory computing (AIMC) speeds up neural-network inference by doing the arithmetic directly inside a memory array, instead of shuttling weights back and forth between memory and a processor. This saves energy, but the physical devices that store the weights are imperfect: programming errors, electrical noise, limited-resolution converters, and outright broken cells all distort the computation, and every physical chip is distorted in its own way. A designer with several such chips available faces an uncomfortable choice: run all of them and combine the answers (safe, but wasteful of energy), or trust a single chip blindly (cheap, but with no guarantee on how often it is wrong). This paper introduces RACE-AIMC (Risk-Aware Certified Ensemble for AIMC), a framework that resolves this choice with statistics rather than guesswork. Offline, RACE-AIMC studies a pool of physical accelerators, picks the single best one for a given energy budget, and computes a mathematically exact upper bound on how often that accelerator will be wrong when it chooses to answer. Online, only that one accelerator is switched on; a lightweight check decides whether to accept its answer or defer to a fallback. In our simulations using a noisy weight mapping and multiple independent test runs, every certified bound stayed under a 10% error target (mean bound 7.83% +- 0.89%, with 70.88% +- 0.98% of inputs answered directly). The resulting system matches the accuracy of a clean digital baseline while cutting modeled energy use by 69.02% relative to always running every accelerator in the pool.

0.34

CHARMING: Parallel Edge AI Acceleration Across Tensor Processing and In-Memory Computation

cs.AR ·2026-11-13 ·Md Omar Faruque, Jingang Jin, João Paulo C. de Lima, Shouzhi Fang, William C. Tegge +3 more
similarity 0.64
Abstract

Edge AI increasingly relies on specialized accelerators for low-latency inference under tight resource and energy constraints, yet their efficiency remains limited by data movement. Prior work, CHARM, mitigates this overhead by overlapping data movement with computation. We observe that in-memory computing can further supplement tensor processing as a parallel accelerator while eliminating certain data movements entirely. We present CHARMING, a heterogeneous edge AI architecture that uses accuracy- and quantization-aware partitioning to distribute and concurrently execute inference workloads across tensor processing and in-memory computation. CHARMING partitions attention heads between an AIE array and an in-DRAM compute unit, balancing execution according to model architecture, sequence length, and precision while selecting heads to minimize accuracy degradation. CHARMING also integrates quantization into the AIE projection stage to further reduce data movement. We validate CHARMING end-to-end in hardware on AMD Versal VCK5000 and Alveo U200 platforms and evaluate LLM and video-generation models across multiple precisions using measured hardware results and simulation of the latest in-memory compute hardware. CHARMING improves prefill performance by up to 23.6 percent and decode performance by up to 44 percent over AIE-only acceleration. With int4 x int4 fixed-point in-memory computation, CHARMING reduces per-layer energy by up to 7.6 percent and improves energy-delay product by up to 24.7 percent, while maintaining accuracy similar to a 32-bit floating-point baseline.

0.19

An Empirical Fault Vulnerability Exploration of ReRAM-based Process-in-Memory CNN Accelerators

cs.AR cs.AI ·2026-10-04 ·Aniseh Dorostkar, Hamed Farbeh, Hamid R. Zarandi
top venuehighly cited similarity 0.64
Abstract

Resistive random-access memory (ReRAM)-based Processing-in-Memory (PIM) accelerator is a promising platform for processing massively memory intensive matrix-vector multiplications of neural networks in parallel domain, due to its capability of analog computation, ultra-high density, near-zero leakage current, and non-volatility. Despite many advantages, ReRAM-based accelerators are highly error-prone due to limitations of technology fabrication that lead to process variations and defects. These limitations degrade the accuracy of Deep Convolutional Neural Networks (Deep CNNs) running on PIM accelerators. While these CNNs accelerators are widely deployed in safety-critical systems, their vulnerability to fault is not well explored. In this paper, we have developed a fault injection framework to investigate the vulnerability of large-scale CNNs at both software- and hardware-level of inference phases. Faulty ReRAM devices are another reliability challenges due to significant degradation of classification accuracy when CNN parameters are mapped to the accelerators. To investigate this challenge, we map the CNN learning parameter to the ReRAM crossbar and inject faults into crossbar arrays. The proposed framework analyzes the impact of stuck-at high (SaH) and stuck-at low (SaL) fault models on different layers and locations of CNN learning parameters. By performing extensive fault injections, we illustrate that the vulnerability behavior of ReRAM-based PIM accelerator for CNNs is greatly impressible to the types and depth of layers, the location of the learning parameter in every layer, and the value and types of faults. Our observations show that different models have different vulnerabilities to faults. Specifically, we show that SaL further reduces classification accuracy than SaH.

0.56

AutoEMatic: Runtime-Adaptive Mixed-Precision LLM Inference via Automatic Exponent-Mantissa Refinement

cs.AI ·2026-11-06 ·Akshat Ramachandran, Reena Elangovan, Rangharajan Venkatesan, Charbel Sakr, Tijmen Blankevoort +2 more
similarity 0.63
Abstract

Existing LLM post-training quantization techniques determine precision before inference begins, yet the precision a model requires varies dynamically across prompts, layers, and inference phases. We present AutoEMatic, a full-stack co-design that adapts the precision of weights, activations, and the KV cache at runtime. A lightweight policy selects each layer's precision at every prefill and decode step from two runtime signals: the entropy of the next-token distribution and the magnitude of each layer's update to its hidden states. This runtime adaptation is made practical by AutoFP, a multi-scale floating-point format that derives 2-, 4-, and 6-bit precisions from a single NVFP4 base format. We realize AutoEMatic on two targets: GPU kernels that execute AutoFP on NVFP4 Tensor Cores, and an accelerator whose vector MAC datapath executes all AutoFP formats natively. Across reasoning and agentic benchmarks, AutoEMatic improves accuracy by up to 21.7% over NVFP4 and matches group-scaled FP6 accuracy on most benchmarks, using 4.9 bits per weight versus 4.5 for NVFP4. On GB300 GPUs, AutoEMatic retains approximately 90-98% of NVFP4 decode throughput across the evaluated configurations. Furthermore, the AutoEMatic accelerator reduces latency by 1.6-2.3x and energy by 7-23% compared to an accelerator with NVFP4-only datapath at iso-accuracy.

0.23