CS Paper Radar

LLM-Assisted Behavioural and Scenario Augmentation for Agent-Based Energy Adoption Models

Iias Faiud, Hossein Khaleghy, Michael Schukat, Karl Mason

cs.AI ·submitted 2026-09-04 08:26 UTC · v1

Abstract

Recent advances in large language models (LLMs) create opportunities to enrich simulation-based energy policy analysis, particularly by supporting structured behavioural assumptions and exploratory techno-economic scenarios. However, directly replacing adoption models with LLM reasoning raises concerns regarding interpretability, reproducibility, and behavioural validity. This paper proposes a hybrid framework for LLM-assisted specification design, integrating bounded behavioural rubrics and structured scenario specifications into a calibrated agent-based model (ABM) of solar photovoltaic (PV) adoption by Irish dairy farms. The proposed approach preserves the original techno-economic adoption mechanism while augmenting it with bounded behavioural modulation and scenario-driven uncertainty analysis. Behavioural effects are represented through interpretable conservative, balanced, and optimistic rubrics, while future policy and market conditions are explored through fixed, rule-validated scenario specifications. Experimental results across multiple policy settings, Monte Carlo worlds, and random seeds demonstrate stable and economically plausible behaviour, with adoption outcomes remaining bounded and monotonic across behavioural regimes. The framework achieves up to approximately 13% behavioural adoption increase relative to the corresponding logistic case without producing unstable or unrealistic saturation dynamics. The results demonstrate that LLM-assisted specifications can be integrated into calibrated energy ABMs in a controlled, reproducible, and policy-relevant manner.

Closest papers

Nearest neighbours by meaning across the whole index.

Reinforcement Learning for Sequential Solar PV Policy Design under Uncertainty: An Agent-Based Approach

cs.AI ·2026-09-04 ·Iias Faiud, Jonaid Shianifar, Michael Schukat, Karl Mason
published similarity 0.65
Abstract

Designing effective and fiscally sustainable policies for solar photovoltaic (PV) adoption requires balancing adoption gains against public expenditure under uncertainty and heterogeneous decision-making. This study formulates PV policy design as a sequential decision problem and integrates reinforcement learning (RL) with a stochastic agent-based model (ABM) that simulates yearly solar PV adoption under uncertainty. A policymaker agent selects annual incentives, including capital grants, subsidised loan rates, and feed-in tariffs, over a 16-year horizon. Adoption--cost trade-offs are explored by varying policy preferences within a scalarised reward framework. Policies are learned using PPO, SAC, and TD3 and evaluated under stochastic simulation. The results show that this approach produces a clear trade-off structure: the highest-adoption policy (TD3, $w_{\text{cost}}=0.5$) achieves approximately 4,145 adopters at a cost of EUR 41.73 million, while the lowest-cost policy (PPO, $w_{\text{cost}}=2.0$) reduces expenditure to EUR 7.27 million with 2,682 adopters. The balanced policy (PPO, $w_{\text{cost}}=1.6$) achieves 3,495 adopters at a cost of EUR 22.47 million. Across algorithms, consistent trade-off patterns are observed, indicating robustness of the adoption--cost relationship. Compared with static baseline policies, the RL framework explores a broader range of policy configurations. These findings demonstrate the potential of RL as a flexible tool for adaptive policy design under uncertainty.

0.35

Accelerating the Adoption of Residential Solar Power Systems: Policy Analysis using a Dynamic Structural Model

cs.LG econ.EMstat.AP ·2026-08-24 ·Sebastián Souyris, Jason A. Duan, Anantaram Balakrishnan, Varun Rai
publishedunusual similarity 0.59
Abstract · 62 pages, 14 figures

Problem definition: Solar electricity generation is a strategic component of energy portfolios designed to meet growing demand and reduce carbon emissions. Governments and municipalities encourage household photovoltaic (PV) adoption through upfront rebates and tax credits. Limited budgets require principled, data-driven policies that account for the drivers of adoption and the effects of incentives on adoption rates. Methodology/results: We develop a dynamic structural model of residential PV diffusion based on adoption decisions by forward-looking households that weigh the economic trade-offs between installing now and later. Adoption depends on return on investment and influence from neighboring adopters. The model segments households by home value and urbanization level, incorporates unobserved heterogeneity, and captures spatiotemporal installation dynamics. We estimate the model using Bayesian methods and detailed household-level data from Austin, Texas. In out-of-sample tests, it predicts installations more accurately than contemporary alternatives. We simulate counterfactual policies within the dynamic equilibrium of PV diffusion to evaluate rebate designs. The framework can also be adapted to study the adoption of other durable technologies. Managerial implications: A rebate offered for a limited period generates more adoption and emissions reductions than a prolonged, costlier program. This counterintuitive result arises from forward-looking behavior, neighbor influence, and accelerated adoption before the rebate expires. We also evaluate phased reductions and rebates differentiated by household segment. A two-step reduction outperforms multiple small reductions. Geographic differentiation improves policy performance, whereas differentiation by home value offers little advantage over a uniform rebate.

0.60

AgentHomeID - Agent-based modelling of building stock transformation: A multi-scale framework for policy assessment and infrastructure planning

eess.SY ·2026-09-04 ·Helen Ganal, Sarah Becker, Sascha Holzhauer, Thilo Glißmann, Friedrich Krebs +2 more
similarity 0.58
Abstract · Submitted to Applied Energy

Decarbonising the building sector is central to meeting climate targets, yet existing models rarely capture the interaction between system-level transformation dynamics and heterogeneous individual investment decisions. This work presents AgentHomeID, an agent-based model of building stock evolution in which owner behaviour, techno-economic constraints, and regulatory frameworks are represented explicitly at the level of individual buildings and their owners. The model differentiates owner-occupiers, private landlords, and institutional owners, using willingness-to-pay (WTP) parameters estimated from empirical decision-maker studies, and operates on both representative building archetypes and real building data derived from geographic information systems (GIS). We demonstrate this versatility across three applications. At national scale, scenario analysis for Germany to 2045 shows that removing binding renewable heating requirements substantially raises final energy demand even where envelope refurbishment is unchanged, and that subsidy allocation and investment activity diverge sharply across owner types and income quartiles, with the lowest quartiles persistently underinvesting. At regional scale, bottom-up simulation for a German distribution grid planning region yields spatially concentrated heat pump uptake at NUTS-3 level that differs from aggregated top-down projections in both magnitude and spatial distribution. At urban block level, the same simulations resolve substation-level load heterogeneity and show that integrated system peaks driven by heat pumps, electric vehicles, and photovoltaics do not coincide with individual technology peaks. Across all three scales, owner heterogeneity and local structure materially shape transition pathways, indicating that they should be represented explicitly in models used for policy assessment and infrastructure planning.

0.26

Autonomous agents for electricity-system planning

cs.AI cs.CL ·2026-11-04 ·Yoon Pyo Lee, Samrendra Roy, Jay Phil Yoo, Kazuma Kobayashi, Souvik Chakraborty +1 more
similarity 0.58
Abstract

Planning electricity systems requires repeated decisions that connect regional resources, investment, operation and network constraints. Here we present an autonomous planning framework that carries prepared regional scenarios through proposal, numerical evaluation, feedback interpretation, redesign and final plan selection. Agents propose investment bounds, storage operating conditions and feeder interventions, interpret numerical feedback, and decide how to revise designs and when to stop. The framework automatically executes annual investment-and-dispatch optimization and representative-feeder verification, applies fixed acceptance criteria and retains the lowest-cost accepted candidate. We evaluate forty carbon-constrained trajectories across ten system-year scenarios in five electricity systems and four countries, using two model deployments and single- and multi-agent architectures. All forty retain candidates satisfying the implemented physical and fixed annual operational carbon-budget checks. Twenty-eight of forty matched reference designs exceed the new scenario ceilings. A separate archive of ninety-six trajectories under a common 1,000 Mt annual ceiling provides matched references and broader regional coverage. The results demonstrate autonomous planning under explicit emissions constraints using public regional data and published institutional demand outlooks.

0.20

SAGE-HAP: Sustainability-Certified Agentic Communication and Computing at a Solar-Powered High-Altitude Platform

cs.NI ·2026-10-20 ·Haoxiang Luo, Bang Huang, Mohamed-Slim Alouini
similarity 0.58
Abstract

The solar-powered High-Altitude Platforms (HAP) can provide persistent communication and computing services beyond terrestrial coverage. However, changing mission priorities, coupled resource demands, and uncertain solar supply complicate sustainable scheduling, while large language model proposals require independent feasibility checks. This paper proposes SAGE, a Sustainability-certified Agentic Ground-service Engine for a HAP. We formulate an energy-causal stochastic optimization problem incorporating semantic modes, multi-user interference, channel aging, essential platform loads, and battery stress. An agent translates operator intent into typed admission, mode, and grouping candidates, while deterministic convex refinement and an action shield verify resource and reserve feasibility using calibrated solar lower bounds before execution. Agent proposals and deterministic fallbacks share the same certification path. Residual-based forecasting and memory-assisted replanning close the control loop. We establish fixed-candidate convexity, reserve safety under calibrated solar coverage and bounded actuation error, and an online utility bound accounting for candidate-generation error. At nominal load, simulations show 2.38 percentage points higher completion and 5.27% greater useful-workload energy efficiency than energy-harvesting Lyapunov control. Under stressed load and solar uncertainty, reserve violations occur in 1/50 runs, versus 47/50 without energy certification. A 600-record calibrated inference replay further shows 23.5--36.5% utility gains over deterministic-only candidates under compound stress.

0.16

AutoEnergyDesign: An LLM-Driven Agent for Automatic Energy System Design Optimization

cs.AI stat.ML ·2026-10-26 ·Amedeo Buonanno, Salvatore Fabozzi, Maria Valenti
similarity 0.58
Abstract

The design optimization of building energy systems represents a complex, high-dimensional search problem involving discrete technology selections, continuous sizing parameters, and intricate economic trade-offs in which every candidate must be evaluated by a year-long simulation. This paper presents AutoEnergyDesign, in which a Large Language Model (LLM) agent reasons over past simulation results, proposes configuration changes and learns in context from each outcome, while a git-based mechanism reverts changes that do not improve the design. The agent couples a reasoning model with explicit memories, a constrained action interface, and an environment-grounded keep/revert feedback signal. The simulator covers eight technologies and computes the 25-year Net Present Cost (NPC). On a case study with measured building loads, the agent, instantiated with three Claude models (Haiku 5.5, Sonnet 5.5 and Opus 5.5; ten runs of 50 simulations each), is compared with random search, Tree-structured Parzen Estimator (TPE) Bayesian optimization and a (1+1) evolution strategy that shares the agent's acceptance rule (ten seeds of 300 evaluations). With all three models the agent reaches an NPC of 3.53MEUR, 1.20% and 0.23% below the best results of TPE and of the evolution strategy, and comes within 1% of it after a median of 18 to 27.5 simulations; among the baselines, only the evolution strategy does so, after a median of 192 evaluations. Every decision is recorded, making the search auditable.

0.26

Right Model, Right Task: Capability-Constrained Carbon Labeling to Decarbonize Generative AI

eess.SY ·2026-10-26 ·Jiawei Qu, Kai Hou, Hongjie Jia, Jinyue Yan
position similarity 0.55
Abstract

The carbon footprint of generative-AI inference depends not only on hardware efficiency and electricity supply, but also on whether the selected model is appropriate for the task. A frontier model may expend unnecessary computation on a routine request, whereas an under-capable model may increase energy use through failure, retries, extended reasoning and escalation. However, a standardized evaluation framework that accounts for task-specific capability requirements and the carbon emissions associated with successful task remains lacking. In this Perspective, we argue for a capability-constrained carbon labeling framework that shifts environmental assessment from carbon intensity per inference towards the expected carbon emissions per successfully completed task at the required capability level. Under this framework, models would first be assessed against task-specific capability requirements, and only models capable of meeting those requirements would be compared on their expected energy use and operational carbon emissions. By linking service quality to carbon cost, this approach could enable more informed matching of the right model to the right task, offering a demand-side pathway to reducing emissions associated with generative-AI token use. Realizing this vision will require standardized capability-based service assessments, comprehensive energy accounting and transparent carbon disclosures.

0.27

LAaDT-DSS: decision support for non-experts on rooftop PV, incentive and grid simulations under Turkish tariff rules

cs.CE cs.AIeess.SY ·2026-11-18 ·Baran Kaynak
similarity 0.55
Abstract · 51 pages, 10 figures. Code, scripts and results: https://doi.org/10.5281/zenodo.24338714

Rooftop photovoltaics raise three questions: should a household invest, which incentive costs the state least, and does the feeder stay within limits? Those who ask are rarely modellers. We present LAaDT-DSS, decision-support software that answers all three under Turkish tariff rules from one simulation core. Non-experts reach it by clicking a house on a 3D map or by asking in plain words; a language model is asked to call the simulation tools, not to compute. Each entry of its 125-entry parameter registry is marked as sourced or estimated. Case studies test the system. Its PV yield lies within $\pm$3.6% of two independent tools at equal losses. Across 2,048 draws of its estimated inputs, the answer for PV alone held in all but one; with a battery, it changed in 31-41% of the draws. Four scripted chat scenarios ran end to end; no user study was run.

0.52