CS Paper Radar

Task-Oriented Semantic Communication for Hazard Warning and Remote Operation in Connected Vehicle Platoons

S M Sabit Bananee, Shahriar Hasan, Muhammad Mahbub Alam, Nafiul Rashid

cs.NI cs.CV ·submitted 2026-09-05 19:53 UTC · v2

Abstract

Connected and automated vehicle platoons require reliable dissemination of task-relevant hazard information to enable appropriate downstream responses, with unresolved situations additionally requiring remote human intervention. However, the limited channel bandwidth of V2X communication makes high-volume sensor data transmission challenging, motivating the exchange of only task-relevant information rather than raw sensor data. This paper proposes an integrated semantic and task-oriented communication framework for cooperative hazard response and remote operation in automated vehicle platoons. The framework combines onboard instance segmentation and monocular depth estimation for task-oriented hazard decision-making with Stable Diffusion Variational Autoencoder (SD-VAE)-based semantic scene compression. Task-relevant hazard information and the compact semantic representation are jointly disseminated through a broadcast-based Emergency Semantic Message (ESM) over the existing V2X protocol stack. Evaluation demonstrates that SD-VAE consistently outperforms JPEG and JPEG 2000 on task-relevant reconstruction metrics, exhibiting graceful degradation rather than a sharp cliff effect under low-SINR conditions, demonstrating its feasibility for remote scene reconstruction when human intervention is required. Moreover, an extensive campaign of 7,290 simulation runs shows a low overall inter-vehicle collision rate of 0.99%, with collisions occurring mainly under extreme high-speed and short-gap conditions.

Comment
This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible

Closest papers

Nearest neighbours by meaning across the whole index.

Adaptive Semantic Communication with Residual Quantization for Resilient Vehicular Networks

cs.NI ·2026-10-07 ·Xuanhao Luo, Ruichen Gao, Sandeep Sreenivasan, Zhizhen Li, Yuchen Liu
similarity 0.64
Abstract

Vehicular networks require timely visual information exchange to support safety-critical applications such as cooperative perception and hazard awareness, yet transmitting high-dimensional camera data over bandwidth-limited and dynamic wireless links remains challenging. In this paper, we propose an adaptive semantic communication architecture for vehicular multicast that adjusts the amount of visual information transmitted according to current channel conditions, available communication resources, and latency requirements. Specifically, the visual encoder uses residual quantization to represent each image at multiple bitrate and reconstruction-quality levels. At runtime, the system selects an appropriate level based on the communication conditions, enabling it to trade visual fidelity for lower transmission overhead when network resources are limited. Context-adaptive entropy coding further compresses the quantized representations using offline-learned statistics, without requiring retraining for different channel conditions. This design allows the visual representation to be learned offline while the communication strategy is adapted online. Experimental results demonstrate competitive rate-distortion performance at ultra-low bitrates, improved delivery reliability and deadline satisfaction across diverse vehicular scenarios, and strong downstream perception performance, achieving up to 0.88 mAP50 while dynamically adapting to changing communication conditions.

0.15

Roadside-Cooperative Autonomous Driving: From Data Platform to Vision-Language End-to-End Reasoning

cs.RO ·2026-08-21 ·Yitao Xu, Tong Wu, Yiyan Wu, Guoji Xu, Yanbo Jiang +5 more
benchmark similarity 0.63
Abstract · 15 pages, 5 figures, under review

Vehicle-to-Everything (V2X) cooperation enables beyond-line-of-sight perception, mitigating occlusions in single-vehicle sensing. However, existing V2X benchmarks provide limited support for closed-loop evaluation and language-grounded supervision, hindering the development of vision-language models (VLMs) for end-to-end cooperative driving. To address these limitations, we introduce V2XBench, a simulation platform featuring synchronized ego--roadside sensing and closed-loop evaluation, together with Chat-V2XBench, a progressively structured VQA dataset for cooperative reasoning. Building upon this benchmark infrastructure, we propose AURORA, an end-to-end cooperative driving framework. Equipped with a dual-view perception architecture, AURORA mitigates spatial and semantic discrepancies across ego and roadside viewpoints through a query-level Cross-View Query Alignment and Fusion (CQAF) module. Leveraging the resulting unified tokens, a LoRA-adapted VLM bridges semantic reasoning and generative trajectory planning. Extensive closed-loop evaluations on V2XBench demonstrate that AURORA achieves state-of-the-art performance in heavily occluded scenarios, with a Route Completion rate of 98.21% and a Driving Score of 76.02, while requiring low roadside communication bandwidth. Ultimately, this work pioneers an extensible V2X--VLM paradigm, paving the way for next-generation cooperative autonomous driving.

0.32

Semantic Communications: Principles, Architectures and Applications

cs.NI ·2026-10-20 ·Sasa Maric
similarity 0.63
Abstract · 9 pages 3 figures

Conventional communication systems are designed to transmit data reliably, focusing on metrics such as bit error rate, throughput, and channel capacity. However, these traditional measures do not evaluate whether the received information is actually useful for a specific downstream task. To address this limitation, semantic communication has emerged as a promising paradigm that prioritizes the meaning, context, and task relevance of transmitted information rather than raw bit level reconstruction. This paper presents a comprehensive review of the theoretical foundations, system architectures, learning techniques, and evaluation practices in semantic communications. We classify existing state-of-the-art algorithms ranging from deep joint source-channel coding (Deep JSCC) and task-oriented feature transmission to generative diffusion models and contrast their operational trade offs against conventional baselines. Furthermore, we examine key application domains, including remote sensing, autonomous vehicles, and healthcare IoT, while addressing open challenges in security, privacy, robustness, and standardized evaluation.

0.29

Semantic Extraction Framework for Goal-Oriented V2X Communication Supporting Safe Intersection Passage

eess.IV cs.CV ·2026-11-06 ·Haoran Yang, Shan Lu, Takaya Yamazato
hot direction similarity 0.62
Abstract · Accept by 2026 Asia-Pacific Conference on Communications

This paper proposes a transmitter-side semantic extraction framework for goal-oriented Vehicle-to-Everything (V2X) communication supporting safe intersection passage. Instead of transmitting raw sensory data, roadside infrastructure extracts task-relevant semantic information from video and traffic-signal sequences and organizes them into compact semantic packets for low-latency driving-decision assistance. The intersection-passing problem is formulated as a set of traffic tasks under Japanese traffic regulations, and the proposed pipeline generates perception and intent semantics through object detection, object tracking, region-of-interest (ROI)-based semantic extraction, and recommended-action generation. The framework is implemented and evaluated on a self-constructed, CARLA-based single-vehicle dataset collected under clear weather conditions. Experimental results show high recommended-action accuracy within the tested task set, while the mean processing latency remains below the frame interval of the 15~fps input video.

0.30

Adaptive Pilot Selection for Unified Semantic Communication and Semantic Sensing in ISAC

eess.SP cs.AI ·2026-09-25 ·Muhammad Abubakar Rashid, Muhammad Hannan Akram, Haejoon Jung, Syed Ali Hassan
similarity 0.62
Abstract

Semantic communication (SemCom) and integrated sensing and communication (ISAC) are promising technologies for future 6G wireless networks. Existing studies have applied semantic technology to either the communication module or the sensing module of ISAC. In this work, we propose SemISAC, which performs both SemCom and semantic sensing within a single dual-function waveform. SemISAC uses a joint semantic encoder that extracts task-specific information for both communication and sensing. We evaluate SemISAC in a vehicular scenario in which vehicles share pixel-wise segmentation of the road environment and, through sensing, classify surrounding objects and estimate their ranges. On the transmitter side, a deep learning encoder converts the input road-scene image into semantic symbols and places them on the data cells of an OFDM grid, while the remaining cells serve as pilots for channel state information estimation and sensing. The pilot configuration is adaptively optimized based on the channel conditions to balance communication and sensing requirements. At the receiver, a deep learning model reconstructs the segmentation from the received waveform, while the transmitting vehicle captures the reflected waveforms from surrounding objects and uses task-specific deep learning decoders for target recognition and range estimation. Simulation results show that SemISAC achieves a segmentation accuracy close to that of the dedicated SemCom module while outperforming both conventional and semantic baselines in target recognition and range estimation.

0.13

The Impact of CutMix on Reliability and Robustness in Semantic Segmentation

cs.CV cs.AIcs.LG ·2026-08-19 ·Steven Landgraf, Markus Ulrich
published similarity 0.61
Abstract · Accepted for publication in the ISPRS Annals (ISPRS Congress 2026, Toronto, Oral Presentation)

Ensuring not only high accuracy but also reliable and robust predictions is critical for the deployment of semantic segmentation models in safety-critical applications such as autonomous driving. Despite the widespread use of CutMix - a simple yet powerful data augmentation strategy - its effect on the reliability and robustness in dense predictions tasks remains unexplored. Motivated by recent findings that semi-supervised segmentation methods, where CutMix is a core component, can severely degrade reliability, this study isolates and systematically analyzes the influence of CutMix on segmentation accuracy, calibration, and uncertainty quality. We evaluate two representative architectures, the CNN-based DeepLabV3+ and the transformer-based SegFormer, across both in-domain and out-of-domain scenarios. Our results show that CutMix has only a minor impact on segmentation accuracy but consistently improves the reliability, particularly under distribution shifts. These improvements indicate that CutMix primarily enhances the trustworthiness of the model's calibration and uncertainty rather than the raw segmentation prediction itself. This distinction is crucial for safety-critical deployment, where reliable confidence estimates are as important as raw performance.

0.34

CoDS: Robust Collaborative Perception via Expert-driven Detection and BEV Segmentation

cs.CV ·2026-08-14 ·Jinlong Wang, Yuang Jia, Junhong Lin, Nannan Li, Wei Gao
top venuecode/data similarity 0.61
Abstract · 10 pages, 6 figures

Collaborative perception breaks through single-view limitations via multi-agent information exchange. However, multi-source noise such as pose errors and communication delays degrades fusion feature quality, constraining perception performance. Joint training of detection and BEV segmentation provides a natural remedy, where segmented road regions help constrain target distributions and detection bounding boxes help recover ambiguous segmentation boundaries. To this end, we propose a robust Collaborative perception framework with expert-driven Detection and bev Segmentation (CoDS). To address spatial inconsistency in fusion quality, we first introduce the Collaborative Reliability Map (CoRM) to explicitly quantify feature quality distribution. Based on CoRM, we design the Semantic Mixture-of-Experts (S-MoE) module to extract differentiated features for inconsistent feature demands. Finally, to further mitigate feature noise degradation, the Bidirectional Task Complementary Interaction (BTCI) refines task-aware features through bidirectional injection. Extensive experiments on OPV2V and V2V4Real datasets show that our CoDS surpasses existing baselines on both tasks and maintains stable robustness under multi-source noise. Code: https://github.com/JinlongW128/CoDS and https://openi.pcl.ac.cn/OpenAIDriving/CoDS.

0.60

DH-VLM: Dual-Horizon Cooperative Latent Reasoning for Autonomous Driving

cs.RO ·2026-08-10 ·Ziyi Song, Chen Xia, Hang Yu, Sheng Zhou, Zhisheng Niu
top venue similarity 0.60
Abstract

Large-scale language models for autonomous driving enable enhanced global understanding and long-horizon planning. However, when deployed in isolated vehicles, limited sensing range and occlusions restrict reliable decision-making, and the substantial computational and latency overhead makes on-board deployment impractical. Cooperative driving provides a potential solution by leveraging external agents for information exchange, but existing methods remain limited in semantic reasoning capability under practical constraints. To address these challenges, we propose DH-VLM, a dual-horizon cooperative latent reasoning framework that enables asymmetric semantic cooperation between the infrastructure and ego vehicle. The infrastructure aggregates multi-layer hidden states to form a global-reasoning horizon latent guidance, which is integrated into the ego model through an Infrastructure-Driven Latent Evolution mechanism for conditional latent refinement. This enables the ego vehicle to leverage long-range contextual understanding while preserving autonomous decision-making within its local planning horizon. Furthermore, we construct a cooperation-oriented question-answer (QA) dataset covering fundamental scene understanding and ego-personalized comprehension to support counterfactual and safety-aware reasoning. Extensive experiments demonstrate that DH-VLM achieves state-of-the-art planning performance, outperforming the previous state of the art by 14.6% in L2 error and 26.9% in collision rate. Compared with query-based end-to-end cooperative driving methods, our approach reduces the communication cost by 57.3% and GPU memory usage by 25.5%, while maintaining strong robustness against infrastructure guidance errors, providing a practical and robust paradigm for cooperative autonomous driving.

0.68