CS Paper Radar

Adaptive Pilot Selection for Unified Semantic Communication and Semantic Sensing in ISAC

Muhammad Abubakar Rashid, Muhammad Hannan Akram, Haejoon Jung, Syed Ali Hassan

eess.SP cs.AI ·submitted 2026-09-25 06:54 UTC · v1

Abstract

Semantic communication (SemCom) and integrated sensing and communication (ISAC) are promising technologies for future 6G wireless networks. Existing studies have applied semantic technology to either the communication module or the sensing module of ISAC. In this work, we propose SemISAC, which performs both SemCom and semantic sensing within a single dual-function waveform. SemISAC uses a joint semantic encoder that extracts task-specific information for both communication and sensing. We evaluate SemISAC in a vehicular scenario in which vehicles share pixel-wise segmentation of the road environment and, through sensing, classify surrounding objects and estimate their ranges. On the transmitter side, a deep learning encoder converts the input road-scene image into semantic symbols and places them on the data cells of an OFDM grid, while the remaining cells serve as pilots for channel state information estimation and sensing. The pilot configuration is adaptively optimized based on the channel conditions to balance communication and sensing requirements. At the receiver, a deep learning model reconstructs the segmentation from the received waveform, while the transmitting vehicle captures the reflected waveforms from surrounding objects and uses task-specific deep learning decoders for target recognition and range estimation. Simulation results show that SemISAC achieves a segmentation accuracy close to that of the dedicated SemCom module while outperforming both conventional and semantic baselines in target recognition and range estimation.

Closest papers

Nearest neighbours by meaning across the whole index.

Adaptive Semantic Communication with Residual Quantization for Resilient Vehicular Networks

cs.NI ·2026-10-07 ·Xuanhao Luo, Ruichen Gao, Sandeep Sreenivasan, Zhizhen Li, Yuchen Liu
similarity 0.66
Abstract

Vehicular networks require timely visual information exchange to support safety-critical applications such as cooperative perception and hazard awareness, yet transmitting high-dimensional camera data over bandwidth-limited and dynamic wireless links remains challenging. In this paper, we propose an adaptive semantic communication architecture for vehicular multicast that adjusts the amount of visual information transmitted according to current channel conditions, available communication resources, and latency requirements. Specifically, the visual encoder uses residual quantization to represent each image at multiple bitrate and reconstruction-quality levels. At runtime, the system selects an appropriate level based on the communication conditions, enabling it to trade visual fidelity for lower transmission overhead when network resources are limited. Context-adaptive entropy coding further compresses the quantized representations using offline-learned statistics, without requiring retraining for different channel conditions. This design allows the visual representation to be learned offline while the communication strategy is adapted online. Experimental results demonstrate competitive rate-distortion performance at ultra-low bitrates, improved delivery reliability and deadline satisfaction across diverse vehicular scenarios, and strong downstream perception performance, achieving up to 0.88 mAP50 while dynamically adapting to changing communication conditions.

0.15

SemISAC: Semantic Integrated Sensing and Communications

eess.SP ·2026-09-16 ·Xiaoqi Zhang, J. Andrew Zhang, Zhongqin Wang, Chang Liu, Weijie Yuan +2 more
similarity 0.66
Abstract

Conventional integrated sensing and communications (ISAC) systems primarily integrate communications and sensing through shared physical resources, without explicitly exploiting task-relevant semantic information. To move beyond such physical-level integration, we propose semantic ISAC (SemISAC), a general framework that unifies semantic communication (SemCom) and semantic sensing (SemS) to convey source meaning and acquire environmental meaning. Specifically, the transmitter combines source semantics and sensing task information with available side information to design the shared waveform and allocate radio resources, while the receiver-side communication and sensing task decoders recover the source meaning and infer the required environmental information, respectively. We also provide an information-theoretic interpretation to characterize the relationship between physical and task-relevant information and the resulting semantic trade-off in SemISAC. Building on this framework, we formulate the general SemISAC design problem and propose two realization methods, namely end-to-end (E2E) SemISAC optimization and modular SemISAC optimization. As a concrete realization, we apply modular SemISAC optimization to jointly design a learnable time-frequency (TF) precoder in an orthogonal frequency-division multiplexing (OFDM) system for representative SemCom and SemS tasks. Simulation results demonstrate that the proposed realization reduces sensing semantic distortion under a given communication requirement and achieves a more favorable communication-sensing trade-off than baseline designs.

0.40

Semantic Communications: Principles, Architectures and Applications

cs.NI ·2026-10-20 ·Sasa Maric
similarity 0.64
Abstract · 9 pages 3 figures

Conventional communication systems are designed to transmit data reliably, focusing on metrics such as bit error rate, throughput, and channel capacity. However, these traditional measures do not evaluate whether the received information is actually useful for a specific downstream task. To address this limitation, semantic communication has emerged as a promising paradigm that prioritizes the meaning, context, and task relevance of transmitted information rather than raw bit level reconstruction. This paper presents a comprehensive review of the theoretical foundations, system architectures, learning techniques, and evaluation practices in semantic communications. We classify existing state-of-the-art algorithms ranging from deep joint source-channel coding (Deep JSCC) and task-oriented feature transmission to generative diffusion models and contrast their operational trade offs against conventional baselines. Furthermore, we examine key application domains, including remote sensing, autonomous vehicles, and healthcare IoT, while addressing open challenges in security, privacy, robustness, and standardized evaluation.

0.29

VISTA: A Framework for Vision-Informed Semantic Traffic Awareness

cs.CV cs.LGcs.NI ·2026-11-16 ·Murat Arda Onsu, Poonam Lohan, Burak Kantarci, Aisha Syed, Matthew Andrews +1 more
published similarity 0.64
Abstract · 8 pages, 4 figures, Accepted for publication in IEEE Internet of Things Magazine, 2026

The Internet of Things (IoT) is transforming intelligent transportation systems by connecting roadside cameras, edge computing units, vehicles, and traffic infrastructure into a shared sensing and decision-making ecosystem. However, transmitting raw traffic video over vehicle-to-everything (V2X) links is bandwidth-intensive, while deploying large multimodal models directly on resource-constrained vehicles is often impractical. To address these limitations, this article proposes VISTA (Vision-Informed Semantic Traffic Awareness), a multimodal vision-language edge-intelligence framework that combines predictive video representation learning with lightweight language-based reasoning to provide communication-efficient traffic situational awareness. In the proposed architecture, roadside surveillance units employ the Video Joint Embedding Predictive Architecture (V-JEPA) and an attentive-pooler module to convert traffic video clips into compact future-scene embeddings. These embeddings are transmitted through V2X links to vehicle-mounted systems, where a TinyLlama small language model, enhanced with a custom visual adapter, interprets the embeddings alongside natural-language (NL) traffic queries. VISTA enables vehicles to obtain interpretable traffic information, reason about upcoming scene dynamics, and identify potential collision risks without receiving raw video streams. Experimental results in a digital-twin urban traffic environment show that VISTA achieves 97.77% accuracy and an 89% F1 score for future collision prediction while reducing the communication payload by several orders of magnitude compared with raw RGB video transmission. These results demonstrate the feasibility of embedding-based multimodal intelligence for low-latency, communication-efficient, and safety-oriented IoT-enabled transportation systems.

0.27

Multimodal Semantic Communication using Shared and Unique Representation Decomposition

cs.IT eess.SP ·2026-11-11 ·Peng Yi, Ying-Chang Liang
similarity 0.63
Abstract · This work has been submitted to the IEEE for possible publication

Semantic communication (SemCom) has emerged as a promising paradigm for bandwidth-constrained mobile and vehicular networks. This paper proposes a unified representation learning framework for multimodal SemCom (MSC), which encodes heterogeneous data into a compact semantic space for efficient transmission and source recovery. The framework addresses the multimodal semantic representation gap, which arises when at least one modality contains semantic information that cannot be fully inferred from the other. To preserve this information for reconstruction, the framework decomposes each representation into shared and modality-specific components. We formulate a mutual information objective for source reconstruction, cross-modal alignment of the shared components, and decoupling of the shared and modality-specific components. To enhance transmission efficiency, we introduce a shared knowledge base implemented as a compact codebook of semantic vectors learned during training. The shared components are transmitted digitally as codebook indices, while the modality-specific components are sent in analog form. We apply knowledge distillation during training, using a pretrained vision foundation model to guide the learning of quantized shared features. On image--text pairs over additive white Gaussian noise (AWGN) and Extended Vehicular A (EVA) channels, the proposed framework improves image reconstruction over conventional separate source-channel coding (SSCC) and representative multimodal and unimodal SemCom systems. Further evaluations show gradual degradation under channel-estimation mismatch, complementary effects of alignment, decoupling, and knowledge distillation on the shared representation, and alignment of shared features across modalities with separation of the modality-specific features.

0.28

Semantic Extraction Framework for Goal-Oriented V2X Communication Supporting Safe Intersection Passage

eess.IV cs.CV ·2026-11-06 ·Haoran Yang, Shan Lu, Takaya Yamazato
hot direction similarity 0.62
Abstract · Accept by 2026 Asia-Pacific Conference on Communications

This paper proposes a transmitter-side semantic extraction framework for goal-oriented Vehicle-to-Everything (V2X) communication supporting safe intersection passage. Instead of transmitting raw sensory data, roadside infrastructure extracts task-relevant semantic information from video and traffic-signal sequences and organizes them into compact semantic packets for low-latency driving-decision assistance. The intersection-passing problem is formulated as a set of traffic tasks under Japanese traffic regulations, and the proposed pipeline generates perception and intent semantics through object detection, object tracking, region-of-interest (ROI)-based semantic extraction, and recommended-action generation. The framework is implemented and evaluated on a self-constructed, CARLA-based single-vehicle dataset collected under clear weather conditions. Experimental results show high recommended-action accuracy within the tested task set, while the mean processing latency remains below the frame interval of the 15~fps input video.

0.30

Task-Oriented Semantic Communication for Hazard Warning and Remote Operation in Connected Vehicle Platoons

cs.NI cs.CV ·2026-09-05 ·S M Sabit Bananee, Shahriar Hasan, Muhammad Mahbub Alam, Nafiul Rashid
similarity 0.62
Abstract · This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may…

Connected and automated vehicle platoons require reliable dissemination of task-relevant hazard information to enable appropriate downstream responses, with unresolved situations additionally requiring remote human intervention. However, the limited channel bandwidth of V2X communication makes high-volume sensor data transmission challenging, motivating the exchange of only task-relevant information rather than raw sensor data. This paper proposes an integrated semantic and task-oriented communication framework for cooperative hazard response and remote operation in automated vehicle platoons. The framework combines onboard instance segmentation and monocular depth estimation for task-oriented hazard decision-making with Stable Diffusion Variational Autoencoder (SD-VAE)-based semantic scene compression. Task-relevant hazard information and the compact semantic representation are jointly disseminated through a broadcast-based Emergency Semantic Message (ESM) over the existing V2X protocol stack. Evaluation demonstrates that SD-VAE consistently outperforms JPEG and JPEG 2000 on task-relevant reconstruction metrics, exhibiting graceful degradation rather than a sharp cliff effect under low-SINR conditions, demonstrating its feasibility for remote scene reconstruction when human intervention is required. Moreover, an extensive campaign of 7,290 simulation runs shows a low overall inter-vehicle collision rate of 0.99%, with collisions occurring mainly under extreme high-speed and short-gap conditions.

0.16

Cooperative Multi-Task Semantic Communication for Joint Classification and Regression Tasks

eess.SP cs.LGeess.IVstat.ML ·2026-09-03 ·Ahmad Halimi Razlighi, Mohammad Siddiqur Rahman, Maximilian H. V. Tillmann, Edgar Beck, Armin Dekorsy
benchmark similarity 0.61
Abstract · This work has been submitted to the IEEE for possible publication

Multi-Task semantic communication (SemCom) prioritizes simultaneous execution of multiple tasks over bit-accurate reconstruction in future intelligent networks. In our prior work [1], we introduced the cooperative multi-task SemCom (CMT-SemCom) framework, in which the semantic encoder is divided into a common unit (CU) and multiple specific units (SUs) to facilitate cooperative multi-task processing. However, CMT-SemCom has been evaluated on homogeneous classification tasks on simplistic datasets, limiting its applicability to real-world perception systems. In this paper, we extend our CMT-SemCom to jointly handle heterogeneous classification and regression tasks on the complex Cityscapes dataset. We adopt the information maximization (InfoMax) principle so that it accommodates mixed discrete and continuous semantic variables. In particular, we benchmark the proposed framework against independent single-task training, a conventional task-agnostic digital transmission, and single-encoder multi-decoder SemCom. Additionally, we investigate the impact of CU capacity on joint task performance, providing design insights. Extensive evaluations demonstrate that CMT-SemCom significantly outperforms the benchmarks.

0.24