CS Paper Radar

MARS: Detecting Unauthorized Variable Manipulations in Multi-Application PLC Runtimes

Syed Ghazanfar Abbas, Dongyan Xu

cs.CR ·submitted 2026-09-05 23:33 UTC · v1

Abstract

Programmable Logic Controllers (PLCs) increasingly run multiple applications alongside the main control program, with shared access to PLC variables. Yet, Industrial Control System (ICS) defenses primarily detect malicious updates by checking whether variable values violate expected bounds, without considering which application performed the update. A malicious application can exploit this gap by modifying variables within normal bounds while still driving the physical process toward an unsafe state. Even when such manipulation is detected, operators cannot identify the responsible application because PLCs do not associate variable updates with application identity. We present MARS, an automated framework for application-level authorization and attribution of PLC variable manipulations. MARS profiles applications on an isolated virtual PLC (vPLC) to derive application-specific variable-access policies and uses a shadow vPLC during operation to attribute production-PLC updates to individual applications without instrumenting the production controller. MARS also detects manipulations that occur only on the production PLC and therefore have no corresponding update on the shadow vPLC. We evaluate MARS on manufacturing, chemical, and water-treatment systems against attacks in which unauthorized applications manipulate PLC variables while remaining within normal bounds. Our results show that MARS detects these manipulations and identifies the responsible application.

Comment
15 pages

Closest papers

Nearest neighbours by meaning across the whole index.

RISK: Auditing Industrial Control Systems for Too-Late-to-Recover Vulnerabilities

cs.CR ·2026-09-29 ·Syed Ghazanfar Abbas, Gang Wang, Dongyan Xu
similarity 0.65
Abstract · 17 pages

The security of industrial control systems (ICS) is important. Yet most ICS security efforts focus on the detection of ICS attacks, with much less attention to the recovery after detection. In this paper, we address this underexplored area by jointly auditing the detection and recovery of ICS. Specifically, we define the too-late-to-recover (TLTR) vulnerability, which allows an attack to drain the available recovery margin before being detected, such that the subsequent recovery procedure will fail to bring the ICS back to a safe state due to the insufficient margin. To audit an ICS for TLTR vulnerabilities, we develop RISK, an automated framework that discovers and validates possible TLTR attack scenarios. RISK holistically models and analyzes, statically and dynamically, the PLC control logic, attack detection policies, recovery procedures, and operational behaviors of an ICS to generate TLTR attack scenarios with concrete attack parameters. We evaluate RISK on three ICS testbeds as well as a real-world fertilizer production plant. Across the three testbeds, a total of 392 TLTR attacks are generated and confirmed, whereas only a small fraction of them can be discovered by existing ICS vetting tools. In the real-world plant, RISK identified a critical TLTR vulnerability which was validated by plant engineers.

0.26

More Granular, Less Trust: Enforcing Intra-Process Isolation with Arm CCA in an Untrusted Management Environment

cs.CR ·2026-08-20 ·Shiqi Liu, Zhouqi Jiang, Jie Wang, Wei Zhou, Kun Sun +2 more
top venuehighly cited similarity 0.64
Abstract · Published in IEEE Transactions on Information Forensics and Security (TIFS)

With the increasing adoption of confidential computing, security-sensitive applications are often deployed in confidential virtual machines (CVMs), which reduce reliance on third-party cloud providers. However, privilege attacks originating from the OS remain a significant threat in these environments. Existing finer-grained isolation schemes, such as SHELTER, provide process-level protection but are still vulnerable to intraprocess attacks and potential collusion between the OS and intra-process adversaries. Many current intra-process isolation techniques continue to depend on the OS to manage and enforce isolation domains, leading to a large Trusted Computing Base (TCB). This gap highlights the need for more granular, less trust-dependent confidential computing solutions. In this paper, we present CCAegis, a system that extends the Arm Confidential Compute Architecture (CCA) to enforce intra-process isolation of sensitive data and operations, safeguarding them from both intraprocess adversaries and the OS. We employ static analysis to track the flow of sensitive data and identify functions that handle such data. Permission-switching instructions are inserted at the function call and return points, adjusting permissions via the Granule Protection Table (GPT) to ensure that only designated functions can access the isolated data. Notably, CCAegis places trust solely in the Secure Monitor, which configures the GPTs and manages domain switching, thereby minimizing the TCB. We implemented CCAegis on both an official emulator and a real development board to assess its performance. Our experimental results show that CCAegis effectively isolates sensitive data and operations, with performance overheads ranging from 1.01x to 1.43x compared to the original version across real-world cryptographic workloads.

0.57

SysComb: Fine-Grained Transparent System Call Filtering for Attack Surface Reduction

cs.CR ·2026-08-27 ·Matthew Rossi, Marco Abbadini, Michele Beretta, Dario Facchinetti, Stefano Paraboschi
similarity 0.63
Abstract

Restricting the system calls available to applications shrinks the kernel's attack surface and greatly mitigates the impact of compromised programs. Recent approaches showcase techniques to generate system call filters, however, all existing solutions require either kernel or application modifications to activate them at runtime. This is intrusive, error-prone, and often impractical, especially when the code is maintained by external parties. This paper presents SysComb, a novel eBPF-based solution to enforce temporally-specialized system call filters based on the application state, without requiring any modification to the application or the kernel code, and thus addressing the above limitations. Moreover, SysComb lets the developer choose between two distinct enforcement strategies: seccomp-like, ensuring no new privileges are gained after a state transition is performed, and least-privilege, which applies to each state the most restrictive filter. We evaluated SysComb using widely used software, showcasing accurate state-aware system call filtering and an overhead comparable to built-in kernel solutions, demonstrating the practicality of our approach.

0.31

PLCBench: Can Autonomous LLM Agents Turn PLC Access into Sustained Physical Impact?

cs.CR cs.AI ·2026-08-27 ·Yitian Zhou, Jingyu Zheng, Qiliang Jiang, Linkang Du, Haoming Liu +4 more
similarity 0.63
Abstract · 36 pages, 13 figures

Industrial control systems (ICSs) rely on programmable logic controllers (PLCs) to connect networked computation with physical control. Tool-using large language model (LLM) agents represent an emerging attack threat: can an autonomous agent convert a network-reachable PLC into sustained adverse physical impact? However, existing evaluations focus on digital tasks or individual stages of PLC testing. In ICSs, evaluations that stop at software exploitation, an accepted write, or tool access may therefore mischaracterize physical risk. We present PLCBENCH, to our knowledge, the first real-PLC hardware-in-the-loop (HIL) framework for characterizing this cyber-to-physical capability and its boundaries. It combines vendor-native interaction, commercial PLC execution, closed-loop reduced-order process simulation, and independent outcome verification. A deterministic evaluator applies fixed rules to runner, communication, PLC-object, and process records to assign six hidden diagnostic flags, distinguishing usable PLC interaction, process-linked manipulation, and sustained physical impact. We instantiate PLCBENCH on four commercial PLCs crossed with four closed-loop workloads. Across five LLM families and 240 real-PLC episodes, 75 episodes (31.3%) sustain their respective physical objectives. Stagewise results show that 98 episodes stop before a valid native read, whereas 62 reach a process-linked write but do not sustain the final objective. Notably, richer process observation is associated with an increase in conditional objective attainment after a process-linked write from 44.2% to 64.0%. These measurements localize failure in configured PLC-process deployments and identify intervention points for future defense evaluation. To support reproducibility, we release the safely disclosable PLCBENCH code and a software-only reproduction pipeline through the accompanying artifact.

0.19

A Blind Trust, the Bloody Thrust: When Attacker-Controlled Hook Updates Steer AI Agent Harnesses towards Malicious Behaviors

cs.CR cs.AI ·2026-09-03 ·Pengxun Li, Litian Zhang, Jianwei Hou, Shujiang Wu, Song Li +2 more
code/data similarity 0.62
Abstract · 18 pages, 8 figures

Modern AI agent harnesses expose lifecycle hooks that bind shell commands to runtime events such as session start, tool calls, and file edits. These commands run with host privileges yet ship as lifecycle-hook configuration and may fire at times the LLM never observes. We identify the lifecycle-hook update path, which harnesses trust blindly, as a new attack surface. Under a supply-chain threat model in which an attacker controls only plugin metadata and lifecycle-hook configuration, a benign versioned plugin can be trojanized by an update that silently binds attacker-chosen commands to benign events, yielding malicious host-side behavior such as privilege escalation. We propose HookPry, an open-source and fully automated attack framework that systematically exploits this vulnerability across heterogeneous AI agent harnesses. HookPry realizes ten attack objectives; across 25 combinations of harnesses and backends in 1,000 end-to-end runs, it compromises all seven evaluated harnesses, with per-harness success rates reaching 92.5%. Representative defenses remain insufficient: Microsoft Defender has 0% recall, and the union of three static defenses misses 47.5% of malicious artifacts.

0.28

Authority Is Not a String: A Capability-Scoped Harness for Prompt-Injection-Resistant Coding Agents

cs.SE ·2026-09-08 ·Dimitrios Stamatios Bouras, Yihan Dai, Sergey Mechtaev
highly cited similarity 0.61
Abstract

Coding agents use system-level tools to read files, execute commands, and modify source code. Within the agent's sandbox, these tools often carry ambient authority: naming a resource is sufficient to act on it. Indirect prompt injection exploits this authority by placing instructions in repository files or tool output that cause the agent to perform actions the user did not request. We propose CapScope, a harness-level authorization mechanism that restricts tool use without requiring the model to identify malicious text. Before repository contents or tool output are read, CapScope derives a task-wide authority ceiling from trusted input. It then assigns each agent a separate set of typed capabilities, stored outside the model's context. Every tool call is checked against the capabilities of the agent that issued it. Permissions assigned to one sub-agent are therefore not automatically available to another. An injection may cause an agent to request an action, but the request is blocked unless that agent already has the required capability. We implement CapScope on the Pi coding agent and evaluate it in a repair workflow where an orchestrator delegates subtasks to separate sub-agents. The evaluation covers five Python tasks, five injection surfaces, four authorization conditions, and three trials per cell (300 runs). The injected effect executes in 33-47/75 runs under the ambient-authority and global-policy baselines, compared with 3/75 under CapScope. CapScope completes 68/75 repairs, while the baselines complete 68-72/75.

0.47

No-Box Vulnerability Analysis: Description-only Detection of Indirect Prompt Injection Vulnerabilities in MCP Servers

cs.CR cs.AI ·2026-09-09 ·Zehua Zhang, Jie Hu, Pratham Hegde, Aditya Maheshbhai Gabani, Souradip Nath +11 more
similarity 0.61
Abstract

Conventional vulnerability analysis relies on either system access or dynamic interaction, all of which may be unavailable to third-party analysts auditing closed-source, remotely hosted, critical in situ systems, or commercially gated software. Therefore, we propose a new paradigm of no-box vulnerability analysis in which neither access nor runtime interaction is available, and only functionality metadata is available. Such metadata defines the intended behavior of the system, including its inputs, outputs, and side effects, while constraining the space of implementations consistent with that behavior. We propose hypothesizing about vulnerabilities that exist across all possible implementations of a given system metadata, without observing or interacting with the target system. An analyst can later validate these hypotheses when additional access is available. We showcase the feasibility of no-box vulnerability analysis through implementing a prototype called MCPSEC, which audits Model Context Protocol (MCP) servers for indirect prompt injection vulnerabilities using only the tool metadata exposed at server registration time. We evaluate MCPSEC on 20 widely deployed MCP servers comprising 177 tools, among which human evaluators confirm 95 vulnerable tools. MCPSEC identified 143 tools as vulnerable, and for each vulnerable tool, it produced a hypothesized vulnerability along with exploitation technique. Using metadata alone, MCPSEC predicted 94 (98.9% recall) real verified vulnerabilities, compared against an LLM baseline with 80 (84.2% recall). Overall, our results introduce no-box vulnerability analysis as a new analysis paradigm and demonstrate its practical feasibility in realistic systems.

0.23

AGATE: Provenance-Based Runtime Defense Against Compositional Attacks on LLM Agents

cs.CR cs.SE ·2026-09-25 ·Xiaorui Zhang, Zhuoran Cheng, Kailin Liu, Zhaoxi Sun, Shiyu Fan +4 more
highly cited similarity 0.61
Abstract

LLM agents can produce harmful effects through sequences of ordinary operations. Judging such actions requires establishing both the authority that permits them and the origin of the data they carry. We present AGATE, an authorization and data-provenance gate at instrumented agent-harness boundaries. Operator declarations and host approval events ground authorization; delegated actions are constrained by grants that bind to exact parameters, expire, and permit a limited number of uses. Source registration connects observed inputs to subsequent transfers, while an effect ledger tracks repeated requests. Deterministic checks make decisions without an LLM in the decision path and retain their grounds with execution evidence for forensic replay. Adapters integrate three production harnesses -- DeepSeek Harness, OpenCode, and OpenClaw -- without modifying host code, translating each host's native observation and veto points into a single shared gate interface; the judgment core is identical in all three, and only enforcement depth differs. Our evaluation combines 153 exercised attack-chain records with deployment, utility, and reconstruction experiments. The deployment observations expose how tool declarations and data checks govern business actions, including a bypass through parameter rewriting. Six of eleven benign file-processing scenarios contain denial events, revealing the utility cost of content-based provenance policies. Across 252 runs on 63 sanitized scenarios, replay agrees with live graph projections for all 63 scenarios on each of two platforms. These results establish the feasibility of provenance-based runtime judgment and identify content transformation, legitimate reuse, and observation coverage as concrete limits.

0.34