CS Paper Radar

PCFlow: Physics-Conditioned Flow Matching for GPR B-Scan Image Synthesis

Zhijie Shen, Chenchen Fu, Xuanhao Chang, Hongtao Bai, Lili He

cs.LG ·submitted 2026-09-07 10:19 UTC · v1

Abstract

Ground-penetrating radar (GPR) B-scan image synthesis is important for data augmentation, algorithm validation, and simulation acceleration, yet generating radargrams with both visual realism and physical consistency remains challenging. Existing learning-based generative models often emphasize visual appearance but provide limited control over response geometry. In this paper, we propose PCFlow, a physics-conditioned flow matching framework for fast GPR B-scan image synthesis. The core of PCFlow is a Maxwell-informed dense physical condition field constructed from the parameterized physical model used for electromagnetic simulation, including material properties, target geometry, propagation cues, and response-domain priors. This condition field provides an interpretable interface between physical scene parameters and radar response geometry, and guides conditional flow matching in the VAE latent space toward physically feasible generation paths. We evaluate PCFlow on a gprMax-based buried-pipeline dataset with both in-distribution and out-of-distribution test cases. Experimental results show that PCFlow generates images with more accurate response geometry and high visual fidelity, demonstrating its effectiveness for controllable and physically faithful radar image synthesis.

Closest papers

Nearest neighbours by meaning across the whole index.

FFDT: Sim-to-Real Domain Transfer Method for Far-Field Ground Penetrating Radar

eess.SP ·2026-10-13 ·Chi Wang, Hai-Han Sun
similarity 0.63
Abstract

The scarcity of real-world ground penetrating radar (RealGPR) data is a major barrier to the development of deep learning (DL) methods for GPR data processing. Although simulated GPR (SimGPR) datasets can be used to train DL models, differences in hardware configuration and system parameters between SimGPR and RealGPR create a sim-to-real domain gap that leads to poor generalization of DL models to RealGPR measurements. To address this gap, we present a physics-based far-field GPR domain transfer (FFDT) method to transfer far-field SimGPR data to the corresponding RealGPR-domain data in the same scenario. In FFDT, SimGPR and RealGPR are modeled using angle-dependent transfer functions that capture three-dimensional antenna radiation characteristics. These transfer functions are then combined with ray tracing to enable the sim-to-real data transfer. Extensive studies across diverse objects and soil conditions demonstrate that FFDT-transferred data closely match RealGPR ground truth. To further demonstrate its value for RealGPR-domain dataset generation, FFDT is implemented to build a RealGPR-domain dataset for training a DL model for clutter removal. The model achieves robust performance on RealGPR measurements. With one-time SimGPR and RealGPR system calibration, FFDT enables RealGPR-domain dataset generation without requiring task-specific RealGPR field measurements for DL model training or fine-tuning, thereby addressing the RealGPR data scarcity bottleneck and supporting reliable development and deployment of DL methods for real-world GPR applications.

0.20

ReFlowSET: Representation-Aligned Latent Flow Matching for SAR-to-EO Image Translation

cs.CV ·2026-09-01 ·Jeonghyeok Do, Seungchul Lee, Munchurl Kim
publishedcode/data similarity 0.59
Abstract · IEEE GRSL 2026 (DOI: https://doi.org/10.1109/LGRS.2026.3750856). Please visit our project page https://kaist-viclab.github.io/ReFlowSET_site

SAR-to-EO image translation aims to generate electro-optical (EO) imagery from synthetic aperture radar (SAR) observations. Existing latent diffusion approaches typically inherit a predetermined autoencoder, although reconstruction fidelity can vary substantially across codecs and modalities. Because the latent codec affects the round-trip preservation of both SAR conditions and EO targets, codec selection constitutes a fundamental design choice; nevertheless, existing methods largely rely on codecs pretrained on natural images. To remedy this, we introduce ReFlowSET, a conditional latent flow-matching framework that selects its codec through a joint SAR--EO reconstruction audit. Rather than inheriting a heavyweight pretrained generator, ReFlowSET trains a substantially smaller conditional DiT from scratch in the selected latent space, using dual-stream SAR conditioning followed by joint feature refinement. To provide semantic guidance for this from-scratch training, intermediate noisy-EO features are aligned with clean target-EO representations extracted by a frozen vision foundation model. This alignment is used only during training and introduces no additional inference cost. Experiments on QXS-SAROPT and SAR2Opt demonstrate state-of-the-art performance across diverse perceptual fidelity and distributional metrics. Code and pretrained weights are publicly available at https://github.com/KAIST-VICLab/ReFlowSET.

0.49

GRADE: Single-Frame Generative Radar Depth Estimation Under Visual Degradation

cs.CV cs.RO ·2026-09-09 ·Bin Zhao, Patrick Chiou, Nakul Garg
top venuecode/data similarity 0.59
Abstract · To appear in ACM MobiCom 2026

Dense 3D depth perception fails under smoke, fog, and darkness because optical sensors cannot penetrate airborne particulates. mmWave radar remains usable and measures range accurately under these conditions, but its small aperture limits angular resolution. We present GRADE, which grounds a pretrained generative prior in single-frame radar geometry to estimate high-fidelity metric depth. GRADE first maps raw 4D radar spectra to coarse metric depth. A latent diffusion backbone then recovers structural detail while conditioning every denoising step on this estimate. A pixel-space adapter uses residual camera cues when available and is trained across clear, smoke-degraded, and occluded inputs so the full output approaches the radar-conditioned path as visibility degrades. Trained and evaluated on ~95K frames across 12 buildings with real smoke, GRADE achieves an MAE of 0.303 m in clear scenes and 0.313 m under smoke, outperforming existing baselines. Code and datasets are available at https://phi-lab-rice.github.io/GRADE.

0.72

BAM! Bayesian Anything Model: a foundation model for generative computational imaging

cs.CV stat.ML ·2026-09-30 ·Alessio Spagnoletti, Charlesquin Kemajou Mbakam, Jonathan Spence, Andrés Almansa, Marcelo Pereyra
benchmark similarity 0.58
Abstract · 37 pages, 25 figures

Generative models are transforming Bayesian computational imaging, yet the field still lacks physics-aware foundation models. Current practice falls into two camps. Large foundation image models are deployed as plug-and-play priors with zero-shot approximate likelihood guidance, which introduces significant bias and computational cost. Physics-aware generative models avoid this bias, but each is tied to a specific dataset, task and instrument. We introduce BAM (Bayesian Anything Model), a lightweight foundation model for few-step, physics-aware posterior sampling that generalises robustly to unseen data and tasks, zero-shot or with minimal finetuning. BAM upgrades the operator-conditioned Reconstruct Anything Model (RAM) backbone (Terris et al.) into a conditional flow map, so instrument physics is specified at inference time rather than fixed during training. BAM has just 36M parameters and is pre-trained jointly on large image corpora and libraries of forward operators. A single network then draws posterior samples in a few steps, with no likelihood approximation and no guidance weights to tune. Across linear inverse problems on FFHQ, AFHQ, LSUN, DIV2K and the Kohler camera-shake benchmark, BAM outperforms in just 3 steps both specialised models and leading zero-shot methods in sample quality, at a fraction of their computational cost. BAM gives the community an accessible entry point to generative computational imaging, lowers the economic and environmental cost of training imaging models, and opens a new path for research on physics-aware Bayesian computational imaging. Official page: https://bayesian-anything-model.github.io/

0.44

Physics-Guided Flow Matching for CT Image Reconstruction

cs.AI cs.CV ·2026-08-28 ·Davide Evangelista
similarity 0.57
Abstract · 16 pages, 6 figures, 2 tables

Deep generative models have recently emerged as powerful priors for solving ill-posed inverse problems in CT, with diffusion-based approaches achieving state-of-the-art reconstruction performance. However, diffusion models typically rely on stochastic sampling procedures, long inference trajectories, and carefully tuned noise schedules, which can limit computational efficiency and numerical stability, especially at high spatial resolutions. In this work, we investigate Flow Matching as an alternative generative prior for CT reconstruction. We train a high-resolution Rectified Flow Matching model on 256x256 chest images from the Mayo Clinic Low-Dose CT dataset. To mitigate overfitting and limited anatomical variability, we employ a two-stage training strategy consisting of an initial phase with strong, anatomically informed data augmentation, followed by a fine-tuning phase with reduced or no augmentation to refine structural fidelity. The resulting model is capable of generating high-quality and anatomically coherent CT-like images, serving as a strong learned prior. We then evaluate multiple reconstruction methods specifically designed for Flow Matching models, including Plug-and-Play Flow, FlowDPS, Flower, and Flow-Priors (ICTM), and compare them against state-of-the-art diffusion-based reconstruction algorithms such as DDRM, DPS, and DiffPIR. Experimental results across several CT inverse problem settings show that Flow Matching-based approaches consistently outperform diffusion-based methods in terms of PSNR, SSIM, and perceptual quality, while requiring fewer sampling steps. Finally, we publicly release the trained Flow Matching model and accompanying code to facilitate reproducibility and future research. Overall, this work demonstrates that Flow Matching provides a stable, efficient, and effective alternative to diffusion models for high-resolution CT image reconstruction.

0.41

Image-Guided Pavement Defect Recognition in GPR Data with novel 3D Deep Learning Architecture

cs.CV ·2026-08-19 ·Yuandong Pan, Linjun Lu, Mudan Wang, Florian Noichl, Fan Xue +4 more
published similarity 0.57
Abstract

Ground Penetrating Radar (GPR) is a widely adopted non-destructive sensing technology for subsurface inspection in civil and transportation engineering. Despite its potential for pavement condition assessment, the large-scale application of GPR in automated inspection has two key challenges: the scarcity of annotated real-world datasets and the lack of deep learning models designed for the unique characteristics of 3-Dimensional (3D) GPR data. This study addresses these limitations by firstly introducing a cost-effective data preparation pipeline that integrates orthomosaic Red Green Blue (RGB) imagery with 3D GPR scans to generate annotated 3D GPR datasets. The proposed method uses the aligned segments of RGB and GPR data, using pavement surface images as a reference to transfer labels of surface-visible defects to corresponding GPR segments, enabling efficient large-scale annotation in a real-world dataset collected on a highway section under operation. In addition to the dataset contribution, we propose a specialised 3D Convolutional Neural Network (CNN) architecture incorporating residual connections, mixed convolutional kernel sizes, and both depthwise and channelwise attention mechanisms to enhance feature representation and defect classification. The model is evaluated on binary classification tasks for detecting patch and crack defects in pavement structures. Experimental results demonstrate that the proposed network outperforms baseline architectures across multiple evaluation metrics. Ablation studies further confirm the effectiveness of the designed architectural components. This work contributes a scalable and practical method for real-world dataset generation, along with a novel deep learning framework.

0.29

Physics-Guided Flow-Map Matching for Precipitation Nowcasting

cs.CV cs.LG ·2026-09-27 ·Shunya Nagashima, Takumi Bannai, Makoto Misaizu, Keisuke Maeda, Takahiro Ogawa +1 more
publishedbenchmarkcode/data similarity 0.57
Abstract · Accepted by ACCV 2026

Precipitation nowcasting, generating future radar fields from past observations, is critical for flood warning and disaster response. It is also a demanding benchmark for spatiotemporal generative modeling, with chaotic dynamics, heavy-tailed intensities, and rare high-intensity structures that matter most. Deterministic models minimize a pixel loss and are driven toward the conditional mean, which blurs exactly those structures, while generative models that add a stochastic residual on top of a deterministic backbone inherit the same blur. We propose Physics-Guided Flow-Map Matching (PG-FMM), a conditional flow-map model that decouples predictable advection from uncertain small-scale detail. A frozen Lagrangian advection prior transports the radar field and supplies an explicit motion forecast, and a flow-map generative head, conditioned on the past frames and the prior rollout rather than summed onto it, produces sharp stochastic detail in four sampling steps. The prior serves only as guidance, so the head replaces blurred structure instead of inheriting it. Extensive experiments on four radar benchmarks show that PG-FMM outperforms state-of-the-art methods on 18 of 24 metrics, with the largest gains at heavy-rain thresholds, where the critical success index improves by up to 58.9%. The project page can be found at https://neurogica.github.io/PG-FMM.

0.57

Scout-Refine-Correct: Teaching Flow Models to Refine Their Own Samples

cs.CV ·2026-10-30 ·Sergey Karpukhin, Aibek Alanov
similarity 0.56
Abstract · preprint

The quality of image generation models trained with diffusion or flow matching is largely fixed by the training budget: at inference, the only available lever is the number of sampling steps, and additional steps improve quality only up to a point. We present a training recipe, Scout-Refine-Correct (SRC), that instead gives a flow-matching generator a genuine inference-time refinement capability. At each sampling step the model takes a scout rollout -- $K$ steps ahead along its own trajectory -- extrapolates a full-sample estimate, and feeds that estimate back to itself as a self-conditioning signal before taking the real step. This can be repeated for $R$ refinement rounds. Two correction losses, applied during training at states the model's own rollouts actually reach rather than only on the ground-truth path, teach the model to use this signal to reach new samples instead of collapsing to a suboptimal one. On ImageNet-256, SRC improves LightningDiT-B from FID~14.5 to FID~7.26 at NFE~550, matching a privileged best-of-$N$ baseline that uses an oracle FID verifier to choose among samples. SRC uses no external verifier, no reward signal, and, after ablation, almost no extra parameters over the base architecture. Combining SRC with best-of-$N$ improves the result further, to FID~3.81 at NFE~4400, showing that the two axes are complementary. We ablate the main design choices -- the architectural pathway for the scout signal, the scout horizon, each correction loss, and the training schedule to demonstrate key working components of training.

0.13