CS Paper Radar

FFDT: Sim-to-Real Domain Transfer Method for Far-Field Ground Penetrating Radar

Chi Wang, Hai-Han Sun

eess.SP ·submitted 2026-10-13 22:35 UTC · v1

Abstract

The scarcity of real-world ground penetrating radar (RealGPR) data is a major barrier to the development of deep learning (DL) methods for GPR data processing. Although simulated GPR (SimGPR) datasets can be used to train DL models, differences in hardware configuration and system parameters between SimGPR and RealGPR create a sim-to-real domain gap that leads to poor generalization of DL models to RealGPR measurements. To address this gap, we present a physics-based far-field GPR domain transfer (FFDT) method to transfer far-field SimGPR data to the corresponding RealGPR-domain data in the same scenario. In FFDT, SimGPR and RealGPR are modeled using angle-dependent transfer functions that capture three-dimensional antenna radiation characteristics. These transfer functions are then combined with ray tracing to enable the sim-to-real data transfer. Extensive studies across diverse objects and soil conditions demonstrate that FFDT-transferred data closely match RealGPR ground truth. To further demonstrate its value for RealGPR-domain dataset generation, FFDT is implemented to build a RealGPR-domain dataset for training a DL model for clutter removal. The model achieves robust performance on RealGPR measurements. With one-time SimGPR and RealGPR system calibration, FFDT enables RealGPR-domain dataset generation without requiring task-specific RealGPR field measurements for DL model training or fine-tuning, thereby addressing the RealGPR data scarcity bottleneck and supporting reliable development and deployment of DL methods for real-world GPR applications.

Closest papers

Nearest neighbours by meaning across the whole index.

PCFlow: Physics-Conditioned Flow Matching for GPR B-Scan Image Synthesis

cs.LG ·2026-09-07 ·Zhijie Shen, Chenchen Fu, Xuanhao Chang, Hongtao Bai, Lili He
similarity 0.63
Abstract

Ground-penetrating radar (GPR) B-scan image synthesis is important for data augmentation, algorithm validation, and simulation acceleration, yet generating radargrams with both visual realism and physical consistency remains challenging. Existing learning-based generative models often emphasize visual appearance but provide limited control over response geometry. In this paper, we propose PCFlow, a physics-conditioned flow matching framework for fast GPR B-scan image synthesis. The core of PCFlow is a Maxwell-informed dense physical condition field constructed from the parameterized physical model used for electromagnetic simulation, including material properties, target geometry, propagation cues, and response-domain priors. This condition field provides an interpretable interface between physical scene parameters and radar response geometry, and guides conditional flow matching in the VAE latent space toward physically feasible generation paths. We evaluate PCFlow on a gprMax-based buried-pipeline dataset with both in-distribution and out-of-distribution test cases. Experimental results show that PCFlow generates images with more accurate response geometry and high visual fidelity, demonstrating its effectiveness for controllable and physically faithful radar image synthesis.

0.24

Image-Guided Pavement Defect Recognition in GPR Data with novel 3D Deep Learning Architecture

cs.CV ·2026-08-19 ·Yuandong Pan, Linjun Lu, Mudan Wang, Florian Noichl, Fan Xue +4 more
published similarity 0.56
Abstract

Ground Penetrating Radar (GPR) is a widely adopted non-destructive sensing technology for subsurface inspection in civil and transportation engineering. Despite its potential for pavement condition assessment, the large-scale application of GPR in automated inspection has two key challenges: the scarcity of annotated real-world datasets and the lack of deep learning models designed for the unique characteristics of 3-Dimensional (3D) GPR data. This study addresses these limitations by firstly introducing a cost-effective data preparation pipeline that integrates orthomosaic Red Green Blue (RGB) imagery with 3D GPR scans to generate annotated 3D GPR datasets. The proposed method uses the aligned segments of RGB and GPR data, using pavement surface images as a reference to transfer labels of surface-visible defects to corresponding GPR segments, enabling efficient large-scale annotation in a real-world dataset collected on a highway section under operation. In addition to the dataset contribution, we propose a specialised 3D Convolutional Neural Network (CNN) architecture incorporating residual connections, mixed convolutional kernel sizes, and both depthwise and channelwise attention mechanisms to enhance feature representation and defect classification. The model is evaluated on binary classification tasks for detecting patch and crack defects in pavement structures. Experimental results demonstrate that the proposed network outperforms baseline architectures across multiple evaluation metrics. Ablation studies further confirm the effectiveness of the designed architectural components. This work contributes a scalable and practical method for real-world dataset generation, along with a novel deep learning framework.

0.29

TriView-YOLO: Early Multi-View Fusion for Ground Penetrating Radar Cavity Detection in Soft, High-Water-Content Soils

cs.CV ·2026-08-10 ·Suphawut Thawinutchokaudom, Sompote Youwai, Warat Kongkitkul, Mitsumasa Yamashina, Jose M. D. S. Rodrigues Neto +1 more
similarity 0.52
Abstract

Automated detection of subsurface cavities from Ground Penetrating Radar (GPR) is most difficult in soft, high-water-content ground, where conductive, water-saturated soil attenuates the signal and degrades cavity reflections, yet this is also the condition under which cavities most readily form. This paper proposes TriView-YOLO, a multi-view YOLOv12 detector for road cavity screening in such ground. Three co-registered views (longitudinal B-scan, horizontal C-scan, and cross-section B-scan) form a 9-channel input fused by a TripleInputConv layer that replaces the YOLOv12 stem; the rest of the network is unchanged, and bounding boxes are required on the longitudinal view only. Training used 1,600 expert-verified field samples, principally metropolitan road surveys of Bangkok, Thailand, acquired with a vehicle-mounted multichannel three-dimensional GPR mobile mapping system, with surveys over the firmer subgrades of Japan added to training and validation only. The test set comes exclusively from the Bangkok surveys, over soft marine clay with 80-140% water content and a water table at 1-2 m depth, a ground condition for which no dedicated deep learning cavity-detection evaluation has been reported. On this unaugmented, field-only test set, split randomly within surveys, the proposed model attains mAP50 of 0.558 +/- 0.028 over three seeds at 23.6 GFLOPs and 3.1 ms per image. Ablations show that removing the auxiliary views lowers mAP50 and recall, whereas public and synthetic training images, DINOv3 features, larger model scale, and COCO pretraining bring no gain.

0.04

DyTransRM: A Unified Simulation-to-Real Framework for Dynamic Radio Map Prediction

eess.SP ·2026-11-14 ·Simin Wang, Jiayi Wei, Jihong Li, Guhan Zheng, Rui Cheng +1 more
similarity 0.52
Abstract · 14 pages, 5 figures

Dynamic radio map (RM) prediction enables proactive wireless network control by forecasting future propagation conditions from historical observations. However, collecting temporally continuous and spatially dense real-world RMs is prohibitively expensive, while models trained on large-scale simulated data often suffer from limited transferability to real environments. To address this issue, we propose DyTransRM, a unified simulation-to-real framework for dynamic RM prediction under sparse real-world measurements. DyTransRM first introduces RadioCLIP to learn physics-semantic representations by aligning environmental evolution with the corresponding propagation evolution, thereby improving both prediction accuracy and cross-domain transferability. To further bridge the simulation-to-real gap, SparseUOT employs sparse-mask simulation refinement to mimic realistic measurement patterns and unbalanced optimal transport to selectively align compatible propagation representations across domains. Experiments on RadioMapMotion and real-world datasets demonstrate that RadioCLIP achieves an NMSE of 0.0018 and an RMSE of 0.012 in simulation-domain prediction. After sparse real-domain adaptation, DyTransRM achieves an NMSE of 0.023, RMSE of 0.079, and MAE of 0.064, outperforming representative adaptation baselines without requiring spatially complete real RMs. These results demonstrate the effectiveness of DyTransRM for transferring simulation-learned dynamic propagation knowledge to practical sparse-measurement scenarios.

0.28

Towards GPROF V08: A Machine-Learning Framework for Simulating Passive Microwave Observations of Precipitation

cs.LG physics.ao-ph ·2026-11-15 ·Simon Pfreundschuh, Christian D. Kummerow, Paula J. Brown
hot direction similarity 0.52
Abstract

Spatially resolved precipitation retrievals based on convolutional neural networks (CNNs) can improve precipitation estimates from passive microwave (PMW) observations and will be used to implement the next operational PMW retrieval algorithm for the Global Precipitation Measurement (GPM) mission. However, the conventional radiative transfer simulations used to extend the retrieval algorithm to the various sensors of the GPM constellation do not provide the spatial coverage required to train CNN-based retrievals. To address this, we introduce a machine-learning-based simulation framework that enables the training of the CNN-based GPROF-NN 3D retrieval algorithm for the full GPM constellation. At the core of this framework is Satformer, a new neural-network architecture that can translate PMW observations between any pair of GPM sensors. The resulting synthetic observations exhibit lower errors than conventional radiative transfer simulations and lead to more accurate precipitation retrievals when used to train GPROF-NN precipitation retrievals. We further demonstrate the applicability of the framework to new instruments by developing GPROF-NN retrievals for the Microwave Imager aboard the Weather System Follow-on Microwave satellite. While GPROF-NN retrievals based on the new simulation framework achieve lower instantaneous retrieval errors and higher correlations compared to independent reference data than conventional retrievals, residual simulation errors can introduce systematic biases in the resulting retrievals. The proposed simulation framework provides a key component for extending GPROF-NN to the full GPM constellation as part of the upcoming operational GPROF V08 retrieval algorithm. The results demonstrate the potential of machine-learning-based simulations to support spatially resolved precipitation retrievals across heterogeneous satellite constellations.

0.41

Sampling Reduction for Near-Field to Far-Field Transformation of Bistatic Radar Target Measurements

eess.SP ·2026-10-14 ·Getahun Kibret Tadesse, Thomas Dallmann
similarity 0.51
Abstract · Preprint; 5 pages, 7 figures

Accurate bistatic radar cross-section (RCS) characterization requires near-field measurements over multiple dimensions, which, under typical near-field sampling requirements, can lead to long measurement durations for electrically large radar targets. This paper presents a near-field-to-far-field transformation based on an equivalent surface-current reconstruction using a-priori information about the target to reduce the number of newly acquired near-field samples. It is assumed that the prior target and the target under test (TUT) differ by localized geometrical modifications. Their complex differential near field is reconstructed using Tikhonov-regularized least squares QR factorization (LSQR) method. The reconstructed differential far- field contribution is coherently combined with the prior far-field contribution to estimate the bi-static RCS of the TUT. The method is preliminarily evaluated using simulations of a complex target at 6 GHz. The results indicate that, for the investigated simulation case, prior information can be used to thin out the sampling grid by 90% while maintaining close agreement with the simulation baseline.

0.23

Hardware-Aware Deployment of Joint SAR Compression and Despeckling on FPGA

eess.IV cs.LG ·2026-08-11 ·Cédric Léonard, Francescopaolo Sica, Martin Schulz
code/data similarity 0.50
Abstract · Submitted to IEEE Transactions on Geoscience and Remote Sensing (TGRS). 11 pages, 8 figures, 4 tables

Next-generation Synthetic Aperture Radar (SAR) missions will generate data far faster than they can downlink, making onboard data reduction essential for near-real-time Earth observation. Learned Image Compression (LIC) offers better rate-distortion performance than handcrafted codecs used operationally today, and recent work shows that simultaneously despeckling and compressing SAR imagery enables better representation capacity while unlocking higher compression rates. These methods, however, have yet to be confronted with the strict power, compute, and operational constraints of spaceborne systems. In this work, we bridge this gap by deploying a joint SAR Despeckling and Data Compression (DDC) framework on an embedded ZCU102 FPGA-based platform, introducing model adaptations that respect the accelerator's fixed-point arithmetic and limited set of supported operations. We evaluate four model topologies across precision levels and across CPU, GPU, and FPGA platforms, revealing several findings with direct design implications. We find that replacing conventional GDN activation functions with plain ReLU improves quality on SAR, suggesting that design principles established for compression of natural images do not necessarily transfer to SAR imagery. In addition, we demonstrate that residual blocks offer little representational benefit for ten times the compute, and show that the FPGA is the most energy-efficient of the platforms tested. Together, these results set a functioning edge deployment workflow and an evidence-based starting point for onboard SAR compression. The code is available at https://github.com/CedricLeon/SAR_DDC_FPGA.

0.32

Ultrawideband Polarization-Rotating Antenna for Enhanced Ground Penetrating Radar Detection

eess.SY ·2026-11-08 ·Ming Li, Yuki Gao, Shu-Lin Chen, Hai-Han Sun, Y. Jay Guo
unusual similarity 0.50
Abstract

Ground penetrating radar (GPR) represents a powerful and widely adopted tool for nondestructive subsurface detection and imaging. To overcome the impaired detection performance caused by polarization mismatch in conventional single-channel GPR systems, this paper presents an innovative ultrawideband polarization-rotating (UPR) antenna that achieves rotating linear polarizations (LPs) by varying the source frequency for enhanced detection. The developed UPR antenna achieves a continuous polarization rotation from $0^\circ$ to $170^\circ$ across 1.2 to 3.2 GHz, as verified by both full-wave simulations and experimental measurements. The antenna is subsequently integrated into a single-channel stepped-frequency GPR system and evaluated against targets of varying geometries in a sandy environment. Compared with a conventional fixed-LP GPR system, the UPR antenna-enabled GPR system delivers markedly more consistent detection performance across all target types, with particularly pronounced enhancements for polarization-sensitive targets. By enabling ultrawideband frequency-dependent polarization agility, the proposed GPR system enhances subsurface target detection while maintaining the simplicity and low cost of a single-channel measurement architecture.

0.29