CS Paper Radar

TriView-YOLO: Early Multi-View Fusion for Ground Penetrating Radar Cavity Detection in Soft, High-Water-Content Soils

Suphawut Thawinutchokaudom, Sompote Youwai, Warat Kongkitkul, Mitsumasa Yamashina, Jose M. D. S. Rodrigues Neto, Jun Shinohara

cs.CV ·submitted 2026-08-10 12:21 UTC · v1

Abstract

Automated detection of subsurface cavities from Ground Penetrating Radar (GPR) is most difficult in soft, high-water-content ground, where conductive, water-saturated soil attenuates the signal and degrades cavity reflections, yet this is also the condition under which cavities most readily form. This paper proposes TriView-YOLO, a multi-view YOLOv12 detector for road cavity screening in such ground. Three co-registered views (longitudinal B-scan, horizontal C-scan, and cross-section B-scan) form a 9-channel input fused by a TripleInputConv layer that replaces the YOLOv12 stem; the rest of the network is unchanged, and bounding boxes are required on the longitudinal view only. Training used 1,600 expert-verified field samples, principally metropolitan road surveys of Bangkok, Thailand, acquired with a vehicle-mounted multichannel three-dimensional GPR mobile mapping system, with surveys over the firmer subgrades of Japan added to training and validation only. The test set comes exclusively from the Bangkok surveys, over soft marine clay with 80-140% water content and a water table at 1-2 m depth, a ground condition for which no dedicated deep learning cavity-detection evaluation has been reported. On this unaugmented, field-only test set, split randomly within surveys, the proposed model attains mAP50 of 0.558 +/- 0.028 over three seeds at 23.6 GFLOPs and 3.1 ms per image. Ablations show that removing the auxiliary views lowers mAP50 and recall, whereas public and synthetic training images, DINOv3 features, larger model scale, and COCO pretraining bring no gain.

Closest papers

Nearest neighbours by meaning across the whole index.

Image-Guided Pavement Defect Recognition in GPR Data with novel 3D Deep Learning Architecture

cs.CV ·2026-08-19 ·Yuandong Pan, Linjun Lu, Mudan Wang, Florian Noichl, Fan Xue +4 more
published similarity 0.59
Abstract

Ground Penetrating Radar (GPR) is a widely adopted non-destructive sensing technology for subsurface inspection in civil and transportation engineering. Despite its potential for pavement condition assessment, the large-scale application of GPR in automated inspection has two key challenges: the scarcity of annotated real-world datasets and the lack of deep learning models designed for the unique characteristics of 3-Dimensional (3D) GPR data. This study addresses these limitations by firstly introducing a cost-effective data preparation pipeline that integrates orthomosaic Red Green Blue (RGB) imagery with 3D GPR scans to generate annotated 3D GPR datasets. The proposed method uses the aligned segments of RGB and GPR data, using pavement surface images as a reference to transfer labels of surface-visible defects to corresponding GPR segments, enabling efficient large-scale annotation in a real-world dataset collected on a highway section under operation. In addition to the dataset contribution, we propose a specialised 3D Convolutional Neural Network (CNN) architecture incorporating residual connections, mixed convolutional kernel sizes, and both depthwise and channelwise attention mechanisms to enhance feature representation and defect classification. The model is evaluated on binary classification tasks for detecting patch and crack defects in pavement structures. Experimental results demonstrate that the proposed network outperforms baseline architectures across multiple evaluation metrics. Ablation studies further confirm the effectiveness of the designed architectural components. This work contributes a scalable and practical method for real-world dataset generation, along with a novel deep learning framework.

0.29

Depth-Aware Pothole Detection Using YOLO and RT-DETR at the Edge

cs.CV cs.AIcs.LG ·2026-08-27 ·Md Monjurul Ahsan Prodhan, Md Nour Hossain
published similarity 0.58
Abstract · 6 pages, 7 figures, IEEE 9th International Conference on Multimedia Information Processing and Retrieval, Presented on Monday, 10 August 202…

Pothole detection and its severity measurement is still an important challenges in urban infrastructure management, where late maintenance directly contributes to vehicle damage, road accidents, and escalating repair costs. Existing automated approaches depend on 2D RGB images and cannot measure physical depth of potholes. In this paper, we present a depthaware pothole detection framework and then compare five architectures: YOLOv8n, YOLOv8nSeg, YOLOv9t, RTDETRL, and RTDETRX for RGB-D sensor fusion-based detection and automated depth measurement. A custom offline augmentation pipeline is used here to simulate adverse road monitoring conditions. All models are trained on the PothRGBD dataset with an 80% training and 20% validation split and evaluated using Precision, Recall, mAP@50, and mAP@50_95. Before measuring the depth data, all depth maps are corrected for camera tilt using RANSAC ground-plane orthorectification and all zero-valued sensor pixels are cast to NaN before any statistic is computed. YOLOv8nSeg achieves the highest mAP@50 of 0.9556 and mAP@50_95 of 0.6758 with the most accurate depth estimate of 2.96 cm with the pixel-precise Dseg algorithm. YOLOv8n achieves the fastest inference at 3.6ms. RTDETRX achieves the highest detection confidence at 92.70%. An important finding is that even after full RANSAC orthorectification, bounding box models overestimate pothole depth by 0.16 to 0.21 cm compared to pixel precise segmentation masks. This confirms that the pavement inclusion bias is structural rather than a calibration artifact.

0.36

FFDT: Sim-to-Real Domain Transfer Method for Far-Field Ground Penetrating Radar

eess.SP ·2026-10-13 ·Chi Wang, Hai-Han Sun
similarity 0.52
Abstract

The scarcity of real-world ground penetrating radar (RealGPR) data is a major barrier to the development of deep learning (DL) methods for GPR data processing. Although simulated GPR (SimGPR) datasets can be used to train DL models, differences in hardware configuration and system parameters between SimGPR and RealGPR create a sim-to-real domain gap that leads to poor generalization of DL models to RealGPR measurements. To address this gap, we present a physics-based far-field GPR domain transfer (FFDT) method to transfer far-field SimGPR data to the corresponding RealGPR-domain data in the same scenario. In FFDT, SimGPR and RealGPR are modeled using angle-dependent transfer functions that capture three-dimensional antenna radiation characteristics. These transfer functions are then combined with ray tracing to enable the sim-to-real data transfer. Extensive studies across diverse objects and soil conditions demonstrate that FFDT-transferred data closely match RealGPR ground truth. To further demonstrate its value for RealGPR-domain dataset generation, FFDT is implemented to build a RealGPR-domain dataset for training a DL model for clutter removal. The model achieves robust performance on RealGPR measurements. With one-time SimGPR and RealGPR system calibration, FFDT enables RealGPR-domain dataset generation without requiring task-specific RealGPR field measurements for DL model training or fine-tuning, thereby addressing the RealGPR data scarcity bottleneck and supporting reliable development and deployment of DL methods for real-world GPR applications.

0.20

YOLO26-RD: An End-to-End Road Damage Detection Network With Learnable Contrast Enhancement and Edge-Guided Downsampling

cs.CV ·2026-08-16 ·Sompote Youwai, Pawarotorn Chaipetch, Hathairat Samaikul, Theerayut Yonseng
similarity 0.51
Abstract

Pavement distress detectors are conventionally specialised for small objects, typically by adding a stride-4 detection head and replacing strided convolution with space-to-depth downsampling. This paper tests that premise against the annotation geometry of region level survey imagery and finds it fails: 1.28% of instances are small at 640 resolution while 70.37% are large, yet a stride-4 level would claim 75.3% of anchors, and complete misses rather than localisation errors dominate baseline failures. YOLO26-RD therefore reallocates the anchor budget, retaining the stride-4 branch as neck features but carrying no detection level there, and adds LearnableContrast, a 494 parameter per tile correction learned from the detection loss and active at inference, and EdgeSPD, a lossless space-to-depth downsampler gated by a fixed Sobel prior. Fifteen models were trained from scratch under one recipe, five scales each of YOLO26-RD and of matched YOLO26 and YOLOv12 families. Averaged over scales YOLO26-RD returns 0.790 mAP50 and 0.482 mAP50-95 against 0.776 and 0.471 for YOLO26 and 0.755 and 0.468 for YOLOv12; it exceeds both on mAP50 at every scale from s upward, and at m, l and x it leads on both metrics, twelve pairwise comparisons decided without exception. YOLO26-RD-l is the best of the fifteen at 0.809 mAP50 and 0.497 mAP50-95, improving on the YOLO26 reference by 0.031 and 0.030 and leading all six per class entries; every arm of a module ablation also exceeds that reference. The margin is thus a property of the architecture rather than of one tuned configuration, though three of the twelve margins lie inside the dataset 0.015 resolution limit and the held out split reproduces the ordering against YOLO26 but not YOLOv12 at scale x. As a TensorRT FP16 engine the released model sustains 98 frames per second on an entry level accelerator, against the 21 needed at 100 km/h.

0.04

Non-Invasive Inspection of Water Canals Using Dronar

cs.RO eess.SP ·2026-09-30 ·Michael Zielinski, Zhizhan Wang, Benjamin Dymond, Reza Razavian, Zhongwang Dou
unusual similarity 0.51
Abstract

Open concrete canals play a vital role in water transportation, serving as primary water infrastructure for millions of people across the Phoenix, Arizona, metro area. Over time, the concrete canals can experience a range of issues, including canal lining deformation, cracked concrete, and sediment buildup on the canal floor. Identifying such critical issues is a resource-intensive process, which currently happens only during four-year dry-up cycles. This prevents the maintenance crew from prioritizing operations on the most affected canal segments. To address this issue, the research team has developed and verified an easily deployable and non-invasive method to inspect canal beds without draining the water. This inspection system integrates affordable, off-the-shelf drone and sonar technology (termed dronar). This dronar system includes a consumer-grade sonar system integrated into an unmanned surface vehicle (USV) that carries the sonar transducer just under the surface of the canal water. This paper presents a proof-of-concept demonstration of the dronar system across three field tests on the Arizona Canal in Phoenix. DownScan depth profiles from the sedimented canal segment were consistently shallower than profiles from the same segment after cleaning, with offsets of up to 15 cm observed along the track. Repeated runs over the clean segment produced closely overlapping DownScan depth profiles, confirming that the dronar yields repeatable measurements across the natural variation of the canal bed. These results establish the dronar as a viable proof-of-concept tool for non-invasive canal bed inspection.

0.26

UrbanTwin Sim2Real LiDAR Challenge 2026: Site-Calibrated Synthetic Data and Multi-Detector Fusion for Roadside 3D Detection

cs.CV eess.SP ·2026-11-16 ·Arnav Kumar, Brijesh Soni
similarity 0.51
Abstract

This report summarizes the work submitted by team arnav007 (submission ID 1054222) for the UrbanTwin Sim2Real LiDAR Challenge (V2X-Real track) at the IEEE BigData Cup 2026. The primary objective is to train 3D detectors for vehicles, pedestrians, and trucks using only synthetic roadside LiDAR data, and to generate synthetic scans that are realistic enough to be indistinguishable from real ones. A CARLA based pipeline is developed and calibrated to the fixed sensor site, accurately modeling the range image, including no-return beams, based on unlabelled real development scans. A combined inference detector, using multiple 3D detectors (VoxelNeXt, PV-RCNN, and SECOND) trained exclusively on synthetic data, is also proposed. Each scan is aligned to the synthetic ground plane and processed through the detectors at multiple ground heights. The resulting bounding boxes are fused using bird's-eye view (BEV) clustering, followed by class-specific post-processing to refine heading, box size, and filter low-confidence detections. The final submission achieved a combined score of 0.8947. The ablation study shows that per-scan ground leveling more than doubled the real-scan mAP, while fusing boxes across different heights and models further improved performance.

0.20

Transparentize A Shallow Cryosphere: High-Resolution Subsurface Imaging using UAV-Borne GPR A review and prospective

eess.SP ·2026-09-16 ·Wenhao Luo, Tong Hao, Qian Ma, Chen Lv, Zhiyi Cao
published similarity 0.50
Abstract · IEEE Geoscience and Remote Sensing Magazine Copyright 2026 IEEE. Personal use of this material is permitted. However, permission to use this…

Accurate characterization of shallow cryosphere subsurface structures is critical for understanding snow and ice dynamics, evaluating environmental hazards, and informing climate-related decision making. Recent advances in unmanned aerial vehicles (UAVs) and compact radar instrumentation have enabled UAV-borne ground penetrating radar (GPR) as a non-contact alternative for subsurface sensing in these environments. By combining the safety-constrained mobility of unmanned aerial platforms with the penetration capability of radar, UAV-borne GPR facilitates rapid, wide-coverage and flexible surveys over snow and ice surfaces in cryosphere that are often inaccessible to traditional ground-based methods. This contribution reviews recent progress in UAV-borne GPR for cryosphere investigations, encompassing system architectures, operational strategies, and representative deployment practices. Furthermore, key data-processing methodologies are summarized for their roles in enhancing subsurface imaging and reconstruction fidelity. A case study from Mochou Lake in East Antarctica, illustrates these capabilities, yielding an ice-thickness estimation error of only 0.03 m when benchmarked against drilling measurements. Finally, the remaining challenges, particularly those associated with scanning coverage, real-time data processing, and detection accuracy, are discussed for future cryosphere applications.

0.37

GNSS Anomaly Detection in Urban Canyons: A Comprehensive Survey of Multimodal Visibility Inference

eess.SP ·2026-10-25 ·Abdelgabar Ahmed, Tarig Ballal, Nour Kouzayha, Tareq Y. Al-Naffouri
publishedsurvey similarity 0.49
Abstract · Accepted for publication in IEEE Aerospace and Electronic Systems Magazine. DOI: 10.1109/MAES.2026.3746915

Reliable GNSS positioning in dense urban environments depends on assessing satellite visibility and identifying measurements degraded by non-line-of-sight (NLOS) reception and multipath. This survey organizes reception-state inference into three complementary evidence families: receiver-side signals, 3D maps and environmental models, and auxiliary sensors. Receiver-side approaches span antenna/electromagnetic, tracking/baseband, and observable-domain evidence, interpreted through rule-based, statistical, machine-learning, and deep-learning methods. Map-based approaches are examined by reviewing environmental representations and methods such as geometric screening, shadow matching, 3D ray tracing, and neural implicit visibility prediction. IMU, camera, and LiDAR measurements provide complementary kinematic, visual, and geometric evidence for online screening. Across these families, we compare accuracy, interpretability, hardware and calibration requirements, map dependence, computational cost, and suitability for real-time deployment. We identify open challenges in dataset quality and labeling, domain generalization, map freshness, and resource-efficient implementation. The resulting synthesis connects signal processing, environmental modeling, and sensor fusion to guide the design of robust urban GNSS measurement-screening systems.

0.26