CS Paper Radar

Non-Invasive Inspection of Water Canals Using Dronar

Michael Zielinski, Zhizhan Wang, Benjamin Dymond, Reza Razavian, Zhongwang Dou

cs.RO eess.SP ·submitted 2026-09-30 17:03 UTC · v1
unusual

Abstract

Open concrete canals play a vital role in water transportation, serving as primary water infrastructure for millions of people across the Phoenix, Arizona, metro area. Over time, the concrete canals can experience a range of issues, including canal lining deformation, cracked concrete, and sediment buildup on the canal floor. Identifying such critical issues is a resource-intensive process, which currently happens only during four-year dry-up cycles. This prevents the maintenance crew from prioritizing operations on the most affected canal segments. To address this issue, the research team has developed and verified an easily deployable and non-invasive method to inspect canal beds without draining the water. This inspection system integrates affordable, off-the-shelf drone and sonar technology (termed dronar). This dronar system includes a consumer-grade sonar system integrated into an unmanned surface vehicle (USV) that carries the sonar transducer just under the surface of the canal water. This paper presents a proof-of-concept demonstration of the dronar system across three field tests on the Arizona Canal in Phoenix. DownScan depth profiles from the sedimented canal segment were consistently shallower than profiles from the same segment after cleaning, with offsets of up to 15 cm observed along the track. Repeated runs over the clean segment produced closely overlapping DownScan depth profiles, confirming that the dronar yields repeatable measurements across the natural variation of the canal bed. These results establish the dronar as a viable proof-of-concept tool for non-invasive canal bed inspection.

Closest papers

Nearest neighbours by meaning across the whole index.

AeroBuoy: A Drone Deployable, 3D Printed, Autonomous Robotic Buoy for Environmental Inspection in Remote and Hazardous River Systems

cs.RO eess.SY ·2026-10-05 ·Reuben O'Brien, Angus Lynch, Minas Liarokapis
published similarity 0.55
Abstract · 7 pages. Accepted version. Published in the 2025 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS). Winner of the I…

Monitoring of waterways such as remote and hazardous rivers and streams is important so as to assess the impact of external factors including construction runoff or climate change. Versatile, autonomous robotic boats can offer excellent environmental inspection and monitoring solutions for remote, dangerous, or access protected water bodies but they have several shortcomings in terms of maneuverability. This paper proposes an environmental inspection system consisting of an autonomous data collection buoy which is designed to be deployed to inaccessible river systems using a drone. The system can perform a drop off and pickup of the buoy depending on the requirements of a particular location and monitoring task. Utilising the natural flow of the river the buoy autonomously steers down, using GPS and magnetometers so as to maintain the desired trajectory. The buoy is capable of measuring water temperature but it can also be equipped with a range of sensors such as water oxygen meter, sonar for river bed inspection, or turbidity for water clarity. This paper describes the system design, presents an analysis of the self-righting capabilities of the buoy, and shows a full system demonstration at the Ōrewa River in Auckland, New Zealand.

0.43

TriView-YOLO: Early Multi-View Fusion for Ground Penetrating Radar Cavity Detection in Soft, High-Water-Content Soils

cs.CV ·2026-08-10 ·Suphawut Thawinutchokaudom, Sompote Youwai, Warat Kongkitkul, Mitsumasa Yamashina, Jose M. D. S. Rodrigues Neto +1 more
similarity 0.51
Abstract

Automated detection of subsurface cavities from Ground Penetrating Radar (GPR) is most difficult in soft, high-water-content ground, where conductive, water-saturated soil attenuates the signal and degrades cavity reflections, yet this is also the condition under which cavities most readily form. This paper proposes TriView-YOLO, a multi-view YOLOv12 detector for road cavity screening in such ground. Three co-registered views (longitudinal B-scan, horizontal C-scan, and cross-section B-scan) form a 9-channel input fused by a TripleInputConv layer that replaces the YOLOv12 stem; the rest of the network is unchanged, and bounding boxes are required on the longitudinal view only. Training used 1,600 expert-verified field samples, principally metropolitan road surveys of Bangkok, Thailand, acquired with a vehicle-mounted multichannel three-dimensional GPR mobile mapping system, with surveys over the firmer subgrades of Japan added to training and validation only. The test set comes exclusively from the Bangkok surveys, over soft marine clay with 80-140% water content and a water table at 1-2 m depth, a ground condition for which no dedicated deep learning cavity-detection evaluation has been reported. On this unaugmented, field-only test set, split randomly within surveys, the proposed model attains mAP50 of 0.558 +/- 0.028 over three seeds at 23.6 GFLOPs and 3.1 ms per image. Ablations show that removing the auxiliary views lowers mAP50 and recall, whereas public and synthetic training images, DINOv3 features, larger model scale, and COCO pretraining bring no gain.

0.04

In Situ Monitoring and Predictive Modeling of Harmful Algal Blooms with Autonomous Surface Vehicles

cs.RO ·2026-11-13 ·Nenyi Kweku Nkensen Dadson, Jean Paul Gonzalez, Daniel P. Arabie, Ryan J. Cedel, Dorin Boldor +1 more
similarity 0.50
Abstract

Harmful Algal Blooms (HABs) pose significant environmental, economic, and public-health challenges in coastal and inland water bodies, creating a need for scalable methods to collect spatially distributed water-quality data. This paper presents an autonomous surface vessel-based sensing system for in-situ water-quality monitoring related to harmful algal bloom detection. The system integrates a BlueBoat Autonomous Surface Vessel (ASV), a motorized winch for depth-controlled sonde deployment, a multiparameter water-quality sonde, side-scan sonar, and an event-camera payload. Autonomous waypoint missions were used to collect measurements across selected sampling regions and multiple depths, enabling both horizontal and vertical characterization of environmental conditions. Field deployments were conducted in Lake Pontchartrain, Louisiana, with additional measurements collected in False River, Louisiana to increase dataset diversity. The collected measurements included algal pigment indicators, nutrient concentration, turbidity, temperature, and other water-quality parameters relevant to bloom formation. In addition, complementary sonar and event-camera data were collected during vehicle operation to provide contextual environmental information. A machine-learning classification approach was also evaluated using the collected water-quality measurements to support HAB and non-HAB classification. The results demonstrate the feasibility of using a modular ASV platform for repeatable, multi-modal water-quality data collection and support future development of autonomous monitoring systems.

0.22

SonarVoxNet: Diver Detection in 3D Bounding Box using 3D Sonar

cs.RO ·2026-10-01 ·Eugene Park, Jiwon Lee, Seyoung Kan, Trung Dong, Xiaomin Lin +1 more
similarity 0.49
Abstract

Autonomous underwater vehicles (AUVs) assisting human divers must continuously track not only the diver's 3D position but also their full-body orientation. However, vision-based perception is unreliable underwater, and forward-looking sonar -- despite being widely used -- discards the elevation information needed for orientation estimation, posing a fundamental limitation. Recently commercialized 3D sonar preserves elevation but produces sparse, noisy returns, and existing detectors are built for dense LiDAR data and for targets that remain upright and rotate only about the yaw axis (e.g., vehicles, pedestrians), making them unable to represent a freely pitching and rolling diver. To address this gap, we present two contributions. First, SonarVoxNet adapts a voxel-based encoder and an anchor-free center-based detection head to 3D sonar data, replacing the conventional yaw-only rotation representation with a continuous 6D rotation parameterization to predict full 9-DoF oriented bounding boxes -- to our knowledge, the first 3D sonar diver detector to do so. Second, Diver3D is the first public 3D sonar dataset with full 3D orientation labels for divers in diverse, non-upright poses, collected at a natural cave-diving site. Through controlled ablations over the backbone and detection head, we show that the dominant factor behind accurate 3D sonar-based diver detection is the transition from yaw-only rotation to full-SO(3) rotation. This transition substantially improves detection accuracy and reduces orientation error. These results demonstrate that full-body diver orientation is recoverable from 3D sonar alone, laying the groundwork for future work on diver pose estimation and diver-robot interaction.

0.09

An Autonomous, 3D Printed, Waterjet-Powered, Open-Source Robotic Trimaran for Environmental Inspection and Monitoring

cs.RO eess.SY ·2026-10-05 ·Reuben O'Brien, Martin Lambrechtse-Reid, Minas Liarokapis
published similarity 0.48
Abstract · 8 pages. Accepted version. Published in the 2024 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS). Finalist for th…

Versatile, autonomous robotic boats can offer excellent environmental inspection and monitoring solutions for remote, dangerous, hard to reach, or access protected water bodies. This paper introduces such a platform in the form of an autonomous, cost-effective, waterjet-powered robotic trimaran. Motivated by the need for an efficient aquatic monitoring, particularly in Aotearoa - New Zealand's diverse environments, the trimaran provides an efficient, low-cost, and easy to replicate alternative to resource-intensive research vessels. The proposed platform, costs $600-1,500 USD to develop (depending on the sensing system configuration), weighs under 5 kg, and excels in bathymetry and water quality testing. The trimaran can reach speeds of up to 2 m/s offering obstacle avoidance of natural features, such as rocks. Utilizing off-the-shelf components and 3D printing technology, the proposed platform offers excellent reproducibility and robustness while operating in shallow waters with its jet propulsion system. The paper presents in detail the design characteristics, the sensing system employed, testing results focusing on bathymetry, and highlights the ability of vessel and the potential for future research and data collection.

0.58

EcoBoat: Design and Experimental Validation of an Autonomous Body-Board Boat For Cleaning Water Bodies

cs.RO ·2026-09-13 ·M. Aman Ansari, Saifullah Khan, Rahul Kulkarni, PB Sujit
similarity 0.48
Abstract

Cleaning water bodies such as swimming pools and lakes typically demands significant manual effort or reliance on costly, sensor-intensive robotic systems. This paper presents EcoBoat, a low-cost autonomous surface vehicle built on a modified hull, designed to collect floating debris in both indoor and outdoor water bodies. For indoor environments, EcoBoat uses ultrasonic sensors to detect boundaries and obstacles, combining random-walk motion with boundary-following behavior. For outdoor environments, it relies on GPS-based geofencing paired with a random-walk strategy for area coverage. A key design feature is a Tesla-valve-inspired collection basket that allows debris intake during forward motion while preventing its escape during turning or braking. Field experiments in pools and lakes validated the design through iterative refinement, demonstrating that a minimalist sensing and computation approach can achieve effective, versatile debris collection across diverse water bodies.

0.24

Could Underwater Data Centers Pose a Risk to AI Treaty Verification?

cs.CY ·2026-09-16 ·James Teague, Ashmita Rajmohan, Yannick Muehlhaeuser
similarity 0.47
Abstract

Proposals for international agreements that limit frontier AI development depend on verification, and a central challenge is detecting undeclared compute facilities used to evade restrictions. Underwater data centers (UDCs) have been suggested as one such evasion vector, but their feasibility at frontier scale and their detectability have not been seriously assessed. We examine current UDC deployments, evaluate construction and maintenance complexity relative to land-based facilities, and analyse the feasibility of a 100,000 H100-equivalent training run underwater. We find that power delivery and cooling are tractable, but interconnect and the hands-on maintenance that large training runs require are severe obstacles - surmountable only by a well-resourced state actor accepting large cost and schedule penalties, and only where concealment, rather than efficiency, is the objective. We then assess detectability through thermal, acoustic, optical and synthetic-aperture-radar (SAR) surveillance. Thermal detection of an operational pod is unlikely outside shallow, calm water; acoustic detection is marginally more effective, but faces limitations in attribution; and optical/SAR monitoring is most powerful during construction and maintenance, when the pressure-vessel fabrication base and the cable-laying fleet create distinctive signatures for AIS-tracking. We conclude that UDCs are a comparatively unlikely evasion route relative to underground or industrially disguised land-based facilities, but the residual risk is non-zero and warrants operationalising the detection modalities discussed.

0.25

PAANI : On Device Visual Evidence Fusion and Explainable Guidance for River Robot Simulation

cs.AI ·2026-09-17 ·Savio Cardoz, Santhiya Rajan
code/datahot direction similarity 0.46
Abstract · 20 pages, 8 figures, 11 tables. Includes system and AI architecture diagrams, model-training results, qualitative evaluations, and Arduino U…

Mobile river monitoring robots must interpret obstacles and water boundaries that geographic waypoints alone cannot describe. On resource constrained platforms, converting imperfect visual predictions into timely and inspectable guidance is a distinct challenge. An object label or steering command does not explain which evidence supports a decision or when that evidence is unreliable. We present PAANI, an on-device perception to guidance architecture that combines a project trained YOLO11n detector and a custom MobileNetV3 Small semantic segmenter with timestamp aligned evidence fusion on Arduino UNO Q. Bounded tracking supplies object persistence, while an explicit corridor policy combines surface labels, accepted detections, urgency and mask uncertainty. Each final advisory exposes its contributing evidence and policy reasons. ROS 2 interfaces connect the local AI pipeline to a separate Gazebo vessel, localization and control testbed. Training uses 10,000 WaterScenes images for four-class detection and 1,127 MaSTr1325 images for segmentation, including 198 segmentation validation images. The selected FP32 ONNX models occupy 14.817 MB. Detector checkpoint test mAP at 0.5 IoU is 0.7388, while the separately evaluated rectangular ONNX export achieves validation mAP at 0.5 IoU of 0.7367. Segmentation ONNX validation mIoU is 0.9750. A five-minute UNO Q recording produced median and 95th percentile pipeline latencies of 467.8 ms and 580.3 ms at a configured 0.5 Hz cadence. The evaluation also identifies black input misclassification and a sampling rate mismatch that prevents the diagnostic apparent motion estimator from collecting sufficient evidence. These results support an inspectable and reusable edge robotics foundation while clearly distinguishing model accuracy and on-board execution from validated on-water collision avoidance.

0.47