CS Paper Radar

In Situ Monitoring and Predictive Modeling of Harmful Algal Blooms with Autonomous Surface Vehicles

Nenyi Kweku Nkensen Dadson, Jean Paul Gonzalez, Daniel P. Arabie, Ryan J. Cedel, Dorin Boldor, Corina Barbalata

cs.RO ·submitted 2026-11-13 18:14 UTC · v1

Abstract

Harmful Algal Blooms (HABs) pose significant environmental, economic, and public-health challenges in coastal and inland water bodies, creating a need for scalable methods to collect spatially distributed water-quality data. This paper presents an autonomous surface vessel-based sensing system for in-situ water-quality monitoring related to harmful algal bloom detection. The system integrates a BlueBoat Autonomous Surface Vessel (ASV), a motorized winch for depth-controlled sonde deployment, a multiparameter water-quality sonde, side-scan sonar, and an event-camera payload. Autonomous waypoint missions were used to collect measurements across selected sampling regions and multiple depths, enabling both horizontal and vertical characterization of environmental conditions. Field deployments were conducted in Lake Pontchartrain, Louisiana, with additional measurements collected in False River, Louisiana to increase dataset diversity. The collected measurements included algal pigment indicators, nutrient concentration, turbidity, temperature, and other water-quality parameters relevant to bloom formation. In addition, complementary sonar and event-camera data were collected during vehicle operation to provide contextual environmental information. A machine-learning classification approach was also evaluated using the collected water-quality measurements to support HAB and non-HAB classification. The results demonstrate the feasibility of using a modular ASV platform for repeatable, multi-modal water-quality data collection and support future development of autonomous monitoring systems.

Closest papers

Nearest neighbours by meaning across the whole index.

An Autonomous, 3D Printed, Waterjet-Powered, Open-Source Robotic Trimaran for Environmental Inspection and Monitoring

cs.RO eess.SY ·2026-10-05 ·Reuben O'Brien, Martin Lambrechtse-Reid, Minas Liarokapis
published similarity 0.60
Abstract · 8 pages. Accepted version. Published in the 2024 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS). Finalist for th…

Versatile, autonomous robotic boats can offer excellent environmental inspection and monitoring solutions for remote, dangerous, hard to reach, or access protected water bodies. This paper introduces such a platform in the form of an autonomous, cost-effective, waterjet-powered robotic trimaran. Motivated by the need for an efficient aquatic monitoring, particularly in Aotearoa - New Zealand's diverse environments, the trimaran provides an efficient, low-cost, and easy to replicate alternative to resource-intensive research vessels. The proposed platform, costs $600-1,500 USD to develop (depending on the sensing system configuration), weighs under 5 kg, and excels in bathymetry and water quality testing. The trimaran can reach speeds of up to 2 m/s offering obstacle avoidance of natural features, such as rocks. Utilizing off-the-shelf components and 3D printing technology, the proposed platform offers excellent reproducibility and robustness while operating in shallow waters with its jet propulsion system. The paper presents in detail the design characteristics, the sensing system employed, testing results focusing on bathymetry, and highlights the ability of vessel and the potential for future research and data collection.

0.59

Seeing above the waves: A modular sensing framework for data acquisition at sea

cs.RO ·2026-08-11 ·Jonathan E. Schmidt, Julius Wirbel, P. Nicholas Hansen, Morgan Louédec, Christian L. H. Westerdahl +2 more
published similarity 0.59
Abstract · Submitted and accepted to the IFAC WC 2026 as an invited session paper for track 7.2 Transportation and Vehicle Systems - Marine Systems

Advancing autonomy for surface vessels requires systematic evaluation of their sensing and perception subsystems. Yet, maritime environments impose unique challenges: sensor installation is constrained by vessel layout, environmental conditions such as fog or sea clutter are difficult to reproduce, and long-duration missions complicate data collection. This work addresses the question: How can we design a modular and reproducible sensor platform for maritime autonomy? We present a comprehensive design blueprint that incorporates diverse modalities - RADAR, LiDAR, IMU, GNSS, AIS, RGB and LWIR cameras, and weather sensors - to enhance environmental awareness and vessel proprioception. Supported by a dedicated ROS2-based software framework for data management, our modular platform enables long-term data collection, hardware-in-the-loop testing, and integration with existing sensors and algorithms. By unifying hardware design and data capture methodology, the platform enhances reproducibility and comparability across vessels and research projects. The proposed framework bridges engineering implementation and research methodology, providing the foundation for standardized, verifiable datasets essential to advancing situational awareness and autonomous maritime navigation.

0.19

AeroBuoy: A Drone Deployable, 3D Printed, Autonomous Robotic Buoy for Environmental Inspection in Remote and Hazardous River Systems

cs.RO eess.SY ·2026-10-05 ·Reuben O'Brien, Angus Lynch, Minas Liarokapis
published similarity 0.58
Abstract · 7 pages. Accepted version. Published in the 2025 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS). Winner of the I…

Monitoring of waterways such as remote and hazardous rivers and streams is important so as to assess the impact of external factors including construction runoff or climate change. Versatile, autonomous robotic boats can offer excellent environmental inspection and monitoring solutions for remote, dangerous, or access protected water bodies but they have several shortcomings in terms of maneuverability. This paper proposes an environmental inspection system consisting of an autonomous data collection buoy which is designed to be deployed to inaccessible river systems using a drone. The system can perform a drop off and pickup of the buoy depending on the requirements of a particular location and monitoring task. Utilising the natural flow of the river the buoy autonomously steers down, using GPS and magnetometers so as to maintain the desired trajectory. The buoy is capable of measuring water temperature but it can also be equipped with a range of sensors such as water oxygen meter, sonar for river bed inspection, or turbidity for water clarity. This paper describes the system design, presents an analysis of the self-righting capabilities of the buoy, and shows a full system demonstration at the Ōrewa River in Auckland, New Zealand.

0.43

AquaCubeAI-Powered Monitoring Turbidity on-board Φsat-2

cs.CV ·2026-09-11 ·Pietro Di Stasio, Francesca Razzano, Elisa Liparulo, Gabriele Meoni, Nicolas Longépé +4 more
similarity 0.58
Abstract · 16 pages, the paper is under review on IEEE JSTARS

Timely monitoring of coastal water quality is critical for environmental protection, yet conventional satellite workflows rely on downlink and ground processing, introducing latency that can limit responsiveness to rapidly evolving turbidity events. To address this limitation, we propose AquaCubeAI, a lightweight machine-learning approach for onboard estimation of coastal water turbidity from Φsat-2 multispectral imagery. By shifting inference from the ground segment to the satellite, AquaCubeAI aims to enable lower-latency, more responsive, and more operationally useful turbidity monitoring under the strict compute and bandwidth constraints of spaceborne platforms. The model is trained on simulated Φsat-2 acquisitions spatially aligned with Copernicus Marine Service (CMEMS) High-Resolution Ocean Color (HR-OC) turbidity products over selected localized coastal sites spanning four European marine macro-regions. To provide a realistic evaluation of generalization in the presence of spatial correlation, we adopt a spatial block splitting protocol that mitigates data leakage between training and evaluation subsets. The main contributions of this work are: (i) a scalable dataset generation pipeline pairing simulated Φsat-2 multispectral patches with CMEMS HR-OC turbidity labels across selected localized European coastal sites; (ii) a compact Multi-Layer Perceptron (MLP)-based turbidity regressor trained under a leakage-aware geospatial split and tailored to embedded constraints; and (iii) a reformulation for dense spatial prediction via parameter sharing, enabling turbidity mapping and simple threshold-based anomaly masks for onboard decision logic. Embedded deployment on an Intel Myriad Vision Processing Unit (VPU) further confirms the feasibility of low-power hardware and supports low-latency inference from multispectral inputs.

0.33

EcoBoat: Design and Experimental Validation of an Autonomous Body-Board Boat For Cleaning Water Bodies

cs.RO ·2026-09-13 ·M. Aman Ansari, Saifullah Khan, Rahul Kulkarni, PB Sujit
similarity 0.57
Abstract

Cleaning water bodies such as swimming pools and lakes typically demands significant manual effort or reliance on costly, sensor-intensive robotic systems. This paper presents EcoBoat, a low-cost autonomous surface vehicle built on a modified hull, designed to collect floating debris in both indoor and outdoor water bodies. For indoor environments, EcoBoat uses ultrasonic sensors to detect boundaries and obstacles, combining random-walk motion with boundary-following behavior. For outdoor environments, it relies on GPS-based geofencing paired with a random-walk strategy for area coverage. A key design feature is a Tesla-valve-inspired collection basket that allows debris intake during forward motion while preventing its escape during turning or braking. Field experiments in pools and lakes validated the design through iterative refinement, demonstrating that a minimalist sensing and computation approach can achieve effective, versatile debris collection across diverse water bodies.

0.24

Toward AI-Driven Phytoplankton Event Detection from Image Classification: Temporal Aggregation Under Domain Shift

cs.CV ·2026-10-07 ·Ali Rohan, Hassan Shayan, Han-Gue Jo, Colin Moffat
unusual similarity 0.57
Abstract · 22 pages, 7 figures

Imaging FlowCytobot (IFCB) systems generate large volumes of phytoplankton imagery that exceed the capacity of manual expert analysis. Although machine-learning approaches achieve high image-level classification performance, it remains unclear whether their predictions can provide ecologically meaningful temporal information for monitoring. This study investigates whether AI-derived phytoplankton classifications can reproduce temporal occurrence patterns and elevated-occurrence signals under realistic sampling and independent-domain transfer. A monitoring-oriented framework was developed using MedPlanktonSet and evaluated on an independent IFCB dataset from the Swedish Meteorological and Hydrological Institute (SMHI). Eight biologically comparable taxa were selected as targets, while all remaining observations were retained as background to preserve the full image-stream denominator. Session-aware partitioning prevented temporal leakage, and alternative preprocessing strategies and convolutional neural network architectures were evaluated. Cross-domain experiments showed that preprocessing strongly affected generalisation. EfficientNet-B0 provided the strongest target-versus-background discrimination and was selected for temporal analysis. Despite residual image-level errors, AI-derived target-occurrence rates closely reproduced expert-derived signals after aggregation (mean absolute error = 0.0432, Pearson $r$ = 0.9696, Spearman $ρ$ = 0.9568). Agreement remained strong across multi-session windows, and elevated, strong, and persistent occurrence proxies were recovered in held-out testing. These results show that AI-based phytoplankton classification can support monitoring-relevant temporal indicators beyond image-level identification and support future operational early-warning development.

0.29

Navigational Safety of Marine Surface Vehicles in Restricted Visibility: From Intelligent Vision to Vision-Centered Multi-Sensor Fusion

cs.CV ·2026-11-04 ·Ryan Wen Liu, Fengchuan Song, Tianxiang Wang, Guobei Peng, Youngrong Kim +5 more
code/data similarity 0.56
Abstract · 42 pages, 16 figures

Marine surface vehicles (MSVs) have attracted considerable attention for their commercial, scientific, and military applications. Owing to their favorable performance-to-cost ratio, shipboard cameras are widely used to detect and recognize potentially hazardous situations across diverse operational scenarios. However, visual perception is inevitably degraded by restricted conditions, including irregular motion of the imaging platform, adverse weather, and long imaging distances. To improve situational awareness and navigation capabilities, complementary sensors, such as the automatic identification system (AIS), radar, and light detection and ranging (LiDAR), etc., have become essential shipboard equipment. Multi-sensor fusion can provide richer perceptual information and help ensure navigational safety of MSVs in restricted visibility. This article reviews recent progress from intelligent vision to vision-centered multi-sensor fusion for newcomers and researchers in intelligent ship navigation and intelligent waterborne transportation system (IWTS). After introducing the generation of quality-degraded images in restricted visibility, we will review intelligent vision methods for four key issues, i.e., shipboard video stabilization, visual perception enhancement, object detection and tracking, and navigable area segmentation. We then examine vision-centered multi-sensor fusion methods, including infrared-visible image fusion, radar-vision fusion, LiDAR-vision fusion, AIS-vision fusion, and other multi-sensor fusion scenarios. Open-source datasets and safety-critical applications are also summarized and discussed. Finally, we highlight open challenges and future research directions. The collected maritime datasets are available at https://github.com/MAPGroup/Datasets and will be regularly updated.

0.36

An open-source, scalable workflow for organizing echosounder data for machine learning applications

eess.SP ·2026-08-10 ·Caesar Tuguinay, Wu-Jung Lee, Valentina Staneva, Elizabeth M. Phillips, Rebecca E. Thomas +2 more
code/data similarity 0.55
Abstract

Echosounders, or high-frequency active sonar systems, have become standard tools for quantifying and mapping the distribution of marine organisms in fisheries or ecological surveys. Conventional echosounder data analysis often relies on human annotation of echograms, which are sonar imagery formed by echo intensity. Over the past decade, in parallel with the exponentially growing volume of echosounder data, there has been a corresponding increase in the development of machine learning (ML) methods that operate primarily on echograms as images. However, echograms are not simply images: they are associated with specific spatiotemporal coordinates that are essential for alignment with survey events, human annotations, and other oceanographic datasets. We present a generalizable two-stage workflow for constructing analysis-ready datasets for ML development tailored for echograms from transect-based surveys, in which (1) acoustic data are partitioned according to transect designation, and (2) masks are created from annotations referencing user-defined uniform spatiotemporal echo data grid. Importantly, ancillary information, such as geospatial coordinates and oceanographic measurements, is propagated across processing stages to preserve the essential contextual information for downstream analyses. We demonstrate the scalability of our workflow implementation based on two open-source software libraries, Echopype and Echoregions, using two example fisheries survey datasets. We additionally provide an executable tutorial that guides readers through the computational implementation of this workflow. Together, these elements provide a scalable and generalizable framework for creating analysis-ready echosounder datasets for ML applications.

0.20