CS Paper Radar

AeroBuoy: A Drone Deployable, 3D Printed, Autonomous Robotic Buoy for Environmental Inspection in Remote and Hazardous River Systems

Reuben O'Brien, Angus Lynch, Minas Liarokapis

cs.RO eess.SY ·submitted 2026-10-05 21:04 UTC · v1
published

Abstract

Monitoring of waterways such as remote and hazardous rivers and streams is important so as to assess the impact of external factors including construction runoff or climate change. Versatile, autonomous robotic boats can offer excellent environmental inspection and monitoring solutions for remote, dangerous, or access protected water bodies but they have several shortcomings in terms of maneuverability. This paper proposes an environmental inspection system consisting of an autonomous data collection buoy which is designed to be deployed to inaccessible river systems using a drone. The system can perform a drop off and pickup of the buoy depending on the requirements of a particular location and monitoring task. Utilising the natural flow of the river the buoy autonomously steers down, using GPS and magnetometers so as to maintain the desired trajectory. The buoy is capable of measuring water temperature but it can also be equipped with a range of sensors such as water oxygen meter, sonar for river bed inspection, or turbidity for water clarity. This paper describes the system design, presents an analysis of the self-righting capabilities of the buoy, and shows a full system demonstration at the Ōrewa River in Auckland, New Zealand.

Comment
7 pages. Accepted version. Published in the 2025 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS). Winner of the IROS 2025 Best Paper Award on Safety, Security, and Rescue Robotics in memory of Motohiro Kisoi. Reuben O'Brien and Angus Lynch contributed equally
Journal ref
2025 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), Hangzhou, China, 2025, pp. 7269-7275
DOI
10.1109/IROS60139.2025.11247654

Closest papers

Nearest neighbours by meaning across the whole index.

An Autonomous, 3D Printed, Waterjet-Powered, Open-Source Robotic Trimaran for Environmental Inspection and Monitoring

cs.RO eess.SY ·2026-10-05 ·Reuben O'Brien, Martin Lambrechtse-Reid, Minas Liarokapis
published similarity 0.65
Abstract · 8 pages. Accepted version. Published in the 2024 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS). Finalist for th…

Versatile, autonomous robotic boats can offer excellent environmental inspection and monitoring solutions for remote, dangerous, hard to reach, or access protected water bodies. This paper introduces such a platform in the form of an autonomous, cost-effective, waterjet-powered robotic trimaran. Motivated by the need for an efficient aquatic monitoring, particularly in Aotearoa - New Zealand's diverse environments, the trimaran provides an efficient, low-cost, and easy to replicate alternative to resource-intensive research vessels. The proposed platform, costs $600-1,500 USD to develop (depending on the sensing system configuration), weighs under 5 kg, and excels in bathymetry and water quality testing. The trimaran can reach speeds of up to 2 m/s offering obstacle avoidance of natural features, such as rocks. Utilizing off-the-shelf components and 3D printing technology, the proposed platform offers excellent reproducibility and robustness while operating in shallow waters with its jet propulsion system. The paper presents in detail the design characteristics, the sensing system employed, testing results focusing on bathymetry, and highlights the ability of vessel and the potential for future research and data collection.

0.59

EcoBoat: Design and Experimental Validation of an Autonomous Body-Board Boat For Cleaning Water Bodies

cs.RO ·2026-09-13 ·M. Aman Ansari, Saifullah Khan, Rahul Kulkarni, PB Sujit
similarity 0.59
Abstract

Cleaning water bodies such as swimming pools and lakes typically demands significant manual effort or reliance on costly, sensor-intensive robotic systems. This paper presents EcoBoat, a low-cost autonomous surface vehicle built on a modified hull, designed to collect floating debris in both indoor and outdoor water bodies. For indoor environments, EcoBoat uses ultrasonic sensors to detect boundaries and obstacles, combining random-walk motion with boundary-following behavior. For outdoor environments, it relies on GPS-based geofencing paired with a random-walk strategy for area coverage. A key design feature is a Tesla-valve-inspired collection basket that allows debris intake during forward motion while preventing its escape during turning or braking. Field experiments in pools and lakes validated the design through iterative refinement, demonstrating that a minimalist sensing and computation approach can achieve effective, versatile debris collection across diverse water bodies.

0.24

In Situ Monitoring and Predictive Modeling of Harmful Algal Blooms with Autonomous Surface Vehicles

cs.RO ·2026-11-13 ·Nenyi Kweku Nkensen Dadson, Jean Paul Gonzalez, Daniel P. Arabie, Ryan J. Cedel, Dorin Boldor +1 more
similarity 0.58
Abstract

Harmful Algal Blooms (HABs) pose significant environmental, economic, and public-health challenges in coastal and inland water bodies, creating a need for scalable methods to collect spatially distributed water-quality data. This paper presents an autonomous surface vessel-based sensing system for in-situ water-quality monitoring related to harmful algal bloom detection. The system integrates a BlueBoat Autonomous Surface Vessel (ASV), a motorized winch for depth-controlled sonde deployment, a multiparameter water-quality sonde, side-scan sonar, and an event-camera payload. Autonomous waypoint missions were used to collect measurements across selected sampling regions and multiple depths, enabling both horizontal and vertical characterization of environmental conditions. Field deployments were conducted in Lake Pontchartrain, Louisiana, with additional measurements collected in False River, Louisiana to increase dataset diversity. The collected measurements included algal pigment indicators, nutrient concentration, turbidity, temperature, and other water-quality parameters relevant to bloom formation. In addition, complementary sonar and event-camera data were collected during vehicle operation to provide contextual environmental information. A machine-learning classification approach was also evaluated using the collected water-quality measurements to support HAB and non-HAB classification. The results demonstrate the feasibility of using a modular ASV platform for repeatable, multi-modal water-quality data collection and support future development of autonomous monitoring systems.

0.29

Non-Invasive Inspection of Water Canals Using Dronar

cs.RO eess.SP ·2026-09-30 ·Michael Zielinski, Zhizhan Wang, Benjamin Dymond, Reza Razavian, Zhongwang Dou
unusual similarity 0.55
Abstract

Open concrete canals play a vital role in water transportation, serving as primary water infrastructure for millions of people across the Phoenix, Arizona, metro area. Over time, the concrete canals can experience a range of issues, including canal lining deformation, cracked concrete, and sediment buildup on the canal floor. Identifying such critical issues is a resource-intensive process, which currently happens only during four-year dry-up cycles. This prevents the maintenance crew from prioritizing operations on the most affected canal segments. To address this issue, the research team has developed and verified an easily deployable and non-invasive method to inspect canal beds without draining the water. This inspection system integrates affordable, off-the-shelf drone and sonar technology (termed dronar). This dronar system includes a consumer-grade sonar system integrated into an unmanned surface vehicle (USV) that carries the sonar transducer just under the surface of the canal water. This paper presents a proof-of-concept demonstration of the dronar system across three field tests on the Arizona Canal in Phoenix. DownScan depth profiles from the sedimented canal segment were consistently shallower than profiles from the same segment after cleaning, with offsets of up to 15 cm observed along the track. Repeated runs over the clean segment produced closely overlapping DownScan depth profiles, confirming that the dronar yields repeatable measurements across the natural variation of the canal bed. These results establish the dronar as a viable proof-of-concept tool for non-invasive canal bed inspection.

0.26

Autonomous robotic bridging using distributed swarm control without inter-agent communication

cs.RO ·2026-09-01 ·Vishwaak C. Thamaraiselvan, Cody L. Lundberg, Michail Theofandis, Suhas Chelian, Nicholas R. Gans
similarity 0.53
Abstract · Work from Army SBIR/STTR A254-012 (contract number W51701-25-C-A253)

We describe SCARAB--Swarm-Capable Autonomous Robotic Aquatic Bridging. Using distributed swarm control and multi-model sensing of agents and docking targets, agents can localize themselves, join into formations and proceed to desired target locations. Our technologies would eventually allow the Army to perform unpredictable, dispersed river crossings, enhance crew survivability, and minimize the logistics footprint compared to the current Improved Ribbon Bridge. Our methods operate without GPS or RF communications, though these can be used in non-contested environments (e.g., civilian disaster relief for flooding, etc.). We demonstrate our system via physics-engine-based simulation of several agents using unmanned surface vehicles (USVs) in the presence of currents and wind.

0.22

AeRove: A Compact Bimodal Aerial-Terrestrial Drone with Rapid Bistable Reconfiguration for Close-Range Pipeline Inspection

cs.RO ·2026-09-17 ·Caleb Polillio, Petras Swissler
code/data similarity 0.52
Abstract · 8 pages, submitted to ICRA 2027

Close-proximity pipeline inspection is challenging for standard drones due to high hovering power consumption, airflow sensitivity, and propeller wash interference with gas sensing. To address this, we present AeRove, a compact bimodal aerial-terrestrial robot. AeRove uses its propeller guards as wheels to roll along pipes and employs a spring-loaded bistable mechanism to reconfigure between ground and flight modes in 200 ms without continuous actuator power to maintain either state. The converging propeller-guard geometry also improves measured thrust efficiency. By reserving flight for obstacle hopping and using ground rolling for continuous traversal, current draw is reduced 14x compared to continuous flight (0.7 A vs. 10 A), extending estimated travel distance from 144 m to 2057 m. Autonomous trials on a 51 cm diameter steel pipe demonstrated navigation on straight and curved sections, obstacle jumping, and leak detection of simulated inspection markers. Separate CO2 sensing experiments evaluated gas-detection performance under perched and aerial operating conditions. Perched inspection produced a substantially larger concentration response than hovering under the tested conditions. During flight, an underbody propeller-intake configuration produced a faster and stronger gas-detection response than an extended probe by leveraging propeller-induced airflow. Code and designs are released under the CC-BY license.

0.38

Seeing above the waves: A modular sensing framework for data acquisition at sea

cs.RO ·2026-08-11 ·Jonathan E. Schmidt, Julius Wirbel, P. Nicholas Hansen, Morgan Louédec, Christian L. H. Westerdahl +2 more
published similarity 0.52
Abstract · Submitted and accepted to the IFAC WC 2026 as an invited session paper for track 7.2 Transportation and Vehicle Systems - Marine Systems

Advancing autonomy for surface vessels requires systematic evaluation of their sensing and perception subsystems. Yet, maritime environments impose unique challenges: sensor installation is constrained by vessel layout, environmental conditions such as fog or sea clutter are difficult to reproduce, and long-duration missions complicate data collection. This work addresses the question: How can we design a modular and reproducible sensor platform for maritime autonomy? We present a comprehensive design blueprint that incorporates diverse modalities - RADAR, LiDAR, IMU, GNSS, AIS, RGB and LWIR cameras, and weather sensors - to enhance environmental awareness and vessel proprioception. Supported by a dedicated ROS2-based software framework for data management, our modular platform enables long-term data collection, hardware-in-the-loop testing, and integration with existing sensors and algorithms. By unifying hardware design and data capture methodology, the platform enhances reproducibility and comparability across vessels and research projects. The proposed framework bridges engineering implementation and research methodology, providing the foundation for standardized, verifiable datasets essential to advancing situational awareness and autonomous maritime navigation.

0.19

PAANI : On Device Visual Evidence Fusion and Explainable Guidance for River Robot Simulation

cs.AI ·2026-09-17 ·Savio Cardoz, Santhiya Rajan
code/datahot direction similarity 0.51
Abstract · 20 pages, 8 figures, 11 tables. Includes system and AI architecture diagrams, model-training results, qualitative evaluations, and Arduino U…

Mobile river monitoring robots must interpret obstacles and water boundaries that geographic waypoints alone cannot describe. On resource constrained platforms, converting imperfect visual predictions into timely and inspectable guidance is a distinct challenge. An object label or steering command does not explain which evidence supports a decision or when that evidence is unreliable. We present PAANI, an on-device perception to guidance architecture that combines a project trained YOLO11n detector and a custom MobileNetV3 Small semantic segmenter with timestamp aligned evidence fusion on Arduino UNO Q. Bounded tracking supplies object persistence, while an explicit corridor policy combines surface labels, accepted detections, urgency and mask uncertainty. Each final advisory exposes its contributing evidence and policy reasons. ROS 2 interfaces connect the local AI pipeline to a separate Gazebo vessel, localization and control testbed. Training uses 10,000 WaterScenes images for four-class detection and 1,127 MaSTr1325 images for segmentation, including 198 segmentation validation images. The selected FP32 ONNX models occupy 14.817 MB. Detector checkpoint test mAP at 0.5 IoU is 0.7388, while the separately evaluated rectangular ONNX export achieves validation mAP at 0.5 IoU of 0.7367. Segmentation ONNX validation mIoU is 0.9750. A five-minute UNO Q recording produced median and 95th percentile pipeline latencies of 467.8 ms and 580.3 ms at a configured 0.5 Hz cadence. The evaluation also identifies black input misclassification and a sampling rate mismatch that prevents the diagnostic apparent motion estimator from collecting sufficient evidence. These results support an inspectable and reusable edge robotics foundation while clearly distinguishing model accuracy and on-board execution from validated on-water collision avoidance.

0.47