CS Paper Radar

AeRove: A Compact Bimodal Aerial-Terrestrial Drone with Rapid Bistable Reconfiguration for Close-Range Pipeline Inspection

Caleb Polillio, Petras Swissler

cs.RO ·submitted 2026-09-17 18:21 UTC · v1
code/data

Abstract

Close-proximity pipeline inspection is challenging for standard drones due to high hovering power consumption, airflow sensitivity, and propeller wash interference with gas sensing. To address this, we present AeRove, a compact bimodal aerial-terrestrial robot. AeRove uses its propeller guards as wheels to roll along pipes and employs a spring-loaded bistable mechanism to reconfigure between ground and flight modes in 200 ms without continuous actuator power to maintain either state. The converging propeller-guard geometry also improves measured thrust efficiency. By reserving flight for obstacle hopping and using ground rolling for continuous traversal, current draw is reduced 14x compared to continuous flight (0.7 A vs. 10 A), extending estimated travel distance from 144 m to 2057 m. Autonomous trials on a 51 cm diameter steel pipe demonstrated navigation on straight and curved sections, obstacle jumping, and leak detection of simulated inspection markers. Separate CO2 sensing experiments evaluated gas-detection performance under perched and aerial operating conditions. Perched inspection produced a substantially larger concentration response than hovering under the tested conditions. During flight, an underbody propeller-intake configuration produced a faster and stronger gas-detection response than an extended probe by leveraging propeller-induced airflow. Code and designs are released under the CC-BY license.

Comment
8 pages, submitted to ICRA 2027

Closest papers

Nearest neighbours by meaning across the whole index.

Task-Driven Closed-Loop Design Optimization of Passively Morphing Quadrotors for Contact-Mediated Narrow Gap Traversal

cs.RO ·2026-11-06 ·Etor Arza, Luca Girardi, Gabriel Maquignaz, Javier Paez, Stefan Leutenegger +2 more
code/data similarity 0.60
Abstract · Video: https://youtu.be/xGkEtl6-vCA. Code: https://github.com/ntnu-arl/soft-quadrotor-optimization

Aerial robots operating in cluttered environments may encounter openings narrower than their nominal width. Existing passively morphing drones reduce their width upon traversal, but they typically involve human-made designs, which can struggle to find the right balance among folding ratio, flight efficiency, and control tracking performance. We introduce a closed-loop design method that jointly optimizes quadrotor geometry and the torque-deflection response of two passively folding arms driven by the success rate in simulation for contact-mediated gap traversal. An optimization algorithm samples candidate designs that are evaluated in a contact-based simulation of the traversal task, where the task success rate is used as a feedback signal to sample progressively better designs over time. The resulting prototype passively reduces its width from 31.3 to 14.1 cm and traverses a 15 cm wide opening at a 2 m/s reference speed. It also tolerates gap approach-angle errors of up to 30 degrees and folds through a 40 cm long confined passage. Compared to a rigid twin, the soft configuration adds only 2 mm of position RMSE and less than 1% electrical power during contact-free flight. These results show that task-driven closed-loop design optimization can produce passively morphing airframes that are compact under contact, tolerant to approach error, and effectively rigid during nominal flight.

0.28

Fly, Drive, Reconfigure: A Modular Reconfigurable Aerial-Ground Platform for Field Operations

cs.RO eess.SY ·2026-09-24 ·Li-Yu Lo, Yanbaihui Liu, Chengchuan Shu, Tyler Harris, Jonathan Ryan +1 more
similarity 0.56
Abstract

Heterogeneous robot teams distribute complementary capabilities across specialized agents, but their physical roles and capacities typically remain fixed throughout a mission. We present HARP, a Heterogeneous Aerial Robotic modules Platform in which independently deployable aerial robots physically reconfigure to compose their capabilities for field operations. HARP comprises sensor-equipped scouts, flydrive rover modules, and task-specific payload modules. Scouts map the environment and inform an energy-aware planner that jointly selects routes and air-ground mobility modes. Rover and payload modules fly independently across terrain that constrains ground travel, then autonomously assemble into a cooperative ground vehicle for energy-efficient payload transport. Motivated by environmental sampling in remote and difficult-to-traverse regions, we evaluate HARP through field experiments spanning sensing, planning, reconfiguration, airground mobility, payload transport, and task execution. We further conduct module-level deployment tests on the Greenland Ice Sheet toward future autonomous missions. HARP demonstrates how heterogeneous robot teams can adapt not only their actions, but also how their physical capabilities are composed during a mission.

0.15

Quadrotor Guidance for Tasks along Elliptical Boundary

eess.SY ·2026-10-23 ·Ravi Khandelwal, Ashwini Ratnoo
similarity 0.55
Abstract

This paper presents a guidance method that enables a quadrotor uncrewed aerial vehicle to perform inspection tasks along an elliptical boundary enclosing a structure of interest. The proposed guidance approach leverages a bifurcation theory-based framework that supports multiple inspection tasks, including convergence to a desired viewpoint, switching between viewpoints along the boundary, constant-speed elliptical circumnavigation, and circumnavigation with sectorial dwell-time constraint. Stability analysis of the proposed guidance dynamics establishes convergence of the generated reference trajectories to the desired behavior. The control parameters in the proposed method further allow the settling time of the reference trajectory to be specified for each task. The resulting reference velocity expressions are closed-form and algebraically simple, facilitating practical implementation. A qualitative comparison with existing guidance methods highlights the flexibility of the proposed approach in achieving different inspection tasks through a unified framework, while relying on simpler guidance computations. The proposed guidance method is validated through numerical simulations using a six-degree-of-freedom quadrotor model with model uncertainties, and a cascaded sliding-mode controller that tracks the generated reference trajectories under bounded disturbances.

0.24

trACT: temporal revelation Airborne Camera Trap

cs.CV ·2026-10-07 ·Oliver Bimber, Rakesh John Amala Arokia Nathan, Mohamed Youssef, Vinayak Lal Bhatnagar, Ralf Berger +1 more
similarity 0.54
Abstract

Effective remote monitoring and surveillance using drones are frequently impeded by severe environmental and thermal clutter, dynamic vegetation, target camouflage, and system latency. Drawing inspiration from the hunting strategies of birds of prey that hover and stabilize their vision to isolate subtle ground motion, we introduce trACT (temporal revelation Airborne Camera Trap), a lightweight, real-time aerial robotics framework designed for autonomous consumer drones. The system integrates Temporal Max Pooling (TMP), a low-level signal processing method that transforms imperceptible movement across a rolling integration window into robust value and time encodings, with self-supervised motion anomaly detection to isolate target motion from background environmental motion caused by wind gusts and drone drift. To overcome mechanical and processing delays, trACT combines motion prediction with automated gimbal-stabilized optical zoom verification and equitable multi-target verification balancing. Extensive real-world field experiments in densely forested wildlife habitats and surveillance scenarios demonstrate that trACT successfully bridges the gap between wide-area aerial monitoring and precise, autonomous target verification under challenging operational conditions.

0.16

EVPeriscope: Extended Perception across Aerial and Ground Vehicles with Event-based Propeller Tracking

cs.RO ·2026-09-10 ·Dexter Ong, Vijay Kumar, Pratik Chaudhari
code/data similarity 0.53
Abstract

Reliable relative localization between aerial and ground robots is a key requirement for tightly coordinated heterogeneous teams. This can be difficult to do using conventional frame-based cameras and fiducial markers because they are sensitive to motion blur, lighting variations, and payload constraints. This paper presents EVPeriscope, an event-based perception system that enables detection, localization and control of a quadrotor using an upward-facing event camera on a ground robot by detecting the high-frequency visual signature of its propellers. This system allows the quadrotor to function as an extended perception system for the ground robot when onboard sensors exhibit degradation or occlusion. We demonstrate the capabilities of this marsupial ground-aerial system via experiments in challenging field conditions with wind speeds of up to 15 mph, in both daylight and at night. We show that the system supports localization and closed-loop navigation through dense foliage where the ground robot's sensors are occluded. Our control system for the quadrotor operates at 200 Hz entirely with onboard sensing and computation. More details and experiment videos can be found on the project page: https://ongdexter.github.io/evperiscope.

0.35

Aerial Layouting: Design and Control of a Compliant and Actuated End-Effector for Precise In-flight Marking on Ceilings

cs.RO ·2026-08-11 ·Christian Lanegger, Marco Ruggia, Marco Tognon, Lionel Ott, Roland Siegwart
publishedhighly cited similarity 0.53
Abstract · C. Lanegger and M. Ruggia contributed equally. Accepted to Robotics: Science and Systems (RSS) 2022

Aerial robots have demonstrated impressive feats of precise control, such as dynamic flight through openings or highly complex choreographies. Despite the accuracy needed for these tasks, there are problems that require levels of precision that are challenging to achieve today. One such problem is aerial interaction. Advances in aerial robot design and control have made such contact-based tasks possible and opened up research into challenging real-world tasks, including contact-based inspection. However, while centimetre accuracy is sufficient and achievable for inspection tasks, the positioning accuracy needed for other problems, such as layouting on construction sites or general push-and-slide tasks, is millimetres. To achieve such a high precision, we propose a new aerial system composed of an aerial vehicle equipped with a novel "smart" end-effector leveraging a stability-optimized Gough-Stewart mechanism. We present its design process and features incorporating the principles of compliance, multiple contact points, actuation, and self-containment. In experiments, we verify that the design choices made for our novel end-effector are necessary to obtain the desired positioning precision. Furthermore, we demonstrate that we can reliably mark lines on ceilings with millimetre accuracy without the need for precise modeling or sophisticated control of the aerial robot.

0.61

Multimodal Sensor-Gated Mid-Air Launch and Vision-Based Recovery of a Child UAV on a Hovering Mothership Drone

cs.RO ·2026-10-11 ·Aashish Sahu, R. Prasanth Kumar
similarity 0.53
Abstract · 4 pages, 5 figures, 2 tables

Launching a micro unmanned aerial vehicle (UAV) from a hovering carrier and recovering it in flight requires reliable confirmation that the child is securely seated before the carrier is allowed to descend. This is challenging because vision provides relative guidance but does not directly indicate load transfer, and a downward-facing camera can lose its fiducial near touchdown. This letter presents a mothership-child quadrotor system in which mission transitions are gated by complementary nonvisual sensing. An upward-facing single-beam LiDAR on the recovery deck provides a binary occupancy state using hysteresis and a debounce interval derived from the child's occluding footprint and crossing speed; real-time kinematic (RTK) positioning conditions the carrier hover; and carrier thrust provides a proprioceptive indication of load transfer. In ten outdoor missions using an F450-class mothership and a Q250-class child with camera-guided recovery, nine completed successfully while RTK-fixed positioning was maintained through release and capture. A complementary MuJoCo study of fully autonomous fiducial-based recovery achieved touchdown 0.077 m from the deck center, while marker detection was lost within the final approximately 0.2 m above the docked configuration. In simulation, carrier thrust changed by -17.0 N at release and +17.3 N at capture, agreeing within 6% with the child's 18.0 N hover thrust. The results support a sensing architecture in which vision guides the approach, while range and proprioceptive information corroborate the final docking decision.

0.20

Project SCOUT: Interceptor Drone for Perimeter Defense

cs.RO ·2026-09-17 ·Azmain Yousuf, Siwei Cai, Knut Peterson, Lifeng Zhou, David Han
publishedcode/data similarity 0.52
Abstract · Accepted at SSRR 2026

The rapid proliferation of unauthorized unmanned aerial vehicles (UAVs) has created a growing need for robust, jamming-resistant counter-UAV systems for perimeter defense. This paper presents \textbf{SCOUT} (Spatial Computation for Optimized UAV Tracking), a ROS-integrated onboard perception and control framework for real-time aerial defense against incoming UAVs. SCOUT performs visual detection, target association, track filtering, and control command generation directly onboard the defender UAV, without relying on external sensing infrastructure or ground-station computation. To provide stable control inputs, the perception pipeline combines TensorRT-accelerated drone detection with ByteTrack-based association and a lightweight track-retention state machine. The state machine rejects abrupt target jumps and maintains short-term target continuity during temporary detection degradation, reducing unstable control responses caused by false detections or target switching. We evaluate the proposed architecture through an integrated hardware deployment executing a planar ``goalkeeping'' interception strategy. In this setting, the defender UAV tracks the incoming target and adjusts its motion to maintain a blocking configuration near the protected boundary. Real-world flight results show that SCOUT maintains valid target detections for 92.2\% of frames while operating at real-time onboard detection rates, demonstrating the feasibility of visual tracking and closed-loop control for UAV perimeter defense. A video demonstration of the end-to-end perimeter defense operation is available online. https://figshare.com/s/497befc033091fc0b84f

0.44