CS Paper Radar

Timescale-aware surrogate-assisted multi-objective optimization of battery cell design for energy density, fast charging, and degradation

Qingbo Zhu, Changfu Zou, Yicun Huang, Chunqiu Xia, Torsten Wik

eess.SY ·submitted 2026-09-07 10:20 UTC · v1

Abstract

Battery cell design must balance energy density, fast charging, and degradation, yet these metrics evolve over different time scales and are costly to optimize jointly. We develop a timescale-aware surrogate-assisted framework that evaluates beginning-of-life volumetric energy density and 10--80% charging time together with state-of-health (SOH) loss over 200 cycles. Physics-based simulations of 1501 cell designs generate 1427 quality-controlled samples across 12 manufacturing-relevant parameters. Objective-specific surrogates support total-order Sobol analysis, which reveals distinct parameter rankings across the three metrics. A cross-objective rank-union strategy then retains variables influential to at least one objective before evolutionary Pareto optimization. Re-evaluation of the optimized candidates using the original physics-based models confirms designs that outperform the reference cell in all three metrics. Among these jointly improving candidates, the objective-wise best solutions, attained by different designs, can reduce SOH loss by 99.31%, increase volumetric energy density by 12.49%, and shorten charging time by 28.73%. The framework makes Pareto exploration across disparate electrochemical timescales computationally tractable, thereby enabling systematic multi-objective optimization of battery cell design.

Closest papers

Nearest neighbours by meaning across the whole index.

STEK: Structural-Terrain-Enhanced Koopman-Inspired Cross-Channel Regularization for Retrospective Battery Multi-Target Estimation

cs.AI ·2026-11-04 ·Jing Wang, Shiyuan Piao, Fugee Tsung
similarity 0.60
Abstract · 18 pages, 4figures

Retrospective battery characterization across heterogeneous cells is challenging because cycling records vary substantially with chemistry, protocol, cell format, capacity, and operating conditions. An endpoint charge--discharge curve captures the local condition of an evaluated cycle, while a cell-level lifecycle terrain summarizes structural evolution across the archived trajectory. We propose STEK, a structural-terrain-enhanced framework for retrospective battery multi-target estimation. STEK combines a cell-level lifecycle (dQ/dV) terrain with an endpoint-derived structural proxy through quality-proxy-conditioned gating. Bounded FiLM and a validity-gated residual head refine the endpoint-curve representation while preserving a curve-based prediction pathway. Battery-type and optional material-text representations further condition an identity-centered low-rank linear map, providing a Koopman-inspired cross-channel consistency objective without modeling temporal dynamics or performing rollout. Under the fixed seven-output MIX-battery protocol, the full retrospective setting improves aggregate performance over endpoint-only learned baselines across multiple temporal backbones; this comparison reflects both the additional archived context and the modeling design. Under matched auxiliary inputs, STEK outperforms direct concatenation and quality-unaware FiLM, while descriptor-removal tests show graceful fallback to the endpoint pathway. Deterministic rules remain preferable for directly recoverable capacity summaries. The method targets retrospective archive harmonization rather than online estimation from cycle t alone.

0.26

A Hybrid State Space-Attention Architecture for Forecasting the Trajectories of Battery Degradation

cs.AI physics.chem-ph ·2026-11-14 ·Shrey Patel, Bhargav Srinivas Rao, Samet Ayhan
benchmark similarity 0.60
Abstract

Early-life battery degradation trajectory forecasting aims to predict a battery cell's full state-of-health (SOH) trajectory from its initial charge-discharge cycles, potentially reducing cell qualification and evaluation time from months to days. Despite recent advances, accurate forecasting remains challenging for emerging battery chemistries, data-scarce domains, and cells exhibiting degradation behaviors beyond those observed during training. Existing state-of-the-art approaches increasingly rely on model scaling, large language model-derived aging-condition embeddings, and extensive fold-specific hyperparameter tuning, raising concerns about computational efficiency, reproducibility, and generalization. This work introduces DecayFormer, a compact hybrid state-space and attention architecture designed for early-life degradation trajectory forecasting. DecayFormer combines cycle-level selective recurrence, using a single scalar state per channel, with an attention mechanism queried by the recurrent state. It further incorporates state-of-charge (SOC) interval statistics and a master curve head that jointly estimates a scalar lifetime and a monotonically non-increasing SOH profile parameterized by normalized lifetime. We evaluate DecayFormer on the BatteryLife benchmark using all 22 aging-condition-exclusive folds, with a single run per fold and one fixed configuration across all folds, without fold-specific tuning. DecayFormer achieves mean test MAPE values of 2.25% on Li-ion, 2.76% on CALB, 0.95% on Na-ion, and 7.19% on Zn-ion. These results demonstrate the potential of compact sequence models to deliver accurate early-life degradation forecasts across diverse battery chemistries and aging conditions, without relying on extensive model scaling or per-fold optimization.

0.08

Assessing Modeling Fidelity for Long-Term Battery Energy Storage Planning: Operation, Degradation, and Temporal Representation

eess.SY ·2026-09-30 ·Hassan Zahid Butt, Xingpeng Li
similarity 0.60
Abstract

Long-term battery energy storage system (BESS) planning often relies on simplified degradation, operational, and temporal representations to maintain computational tractability, yet their effects on lifecycle conclusions are not well understood. This paper assesses the modeling fidelity needed for long-term lifecycle evaluation of BESS designs used in planning studies. A 20-year grid-connected microgrid is sized using a degradation-naive planning model, after which the installed portfolio is fixed and evaluated through sequential lifecycle validation. The reference representation combines nonlinear calendar and cycle aging, C-rate-dependent efficiencies, state-of-health-dependent performance, self-discharge, battery replacement, and full 8,760-h chronology. Battery-model hierarchies, targeted ablations, linear degradation surrogates, health-update intervals, temporal reductions, and combined simplifications are compared using lifecycle cost, replacement timing, state of health, and energy adequacy. The reference case produces replacements in years 9 and 18, a $111.25 million lifecycle net present cost, and 24.01 MWh of cumulative energy not served. Omitting calendar aging eliminates both replacements and understates lifecycle cost by 35.1%, whereas a separately calibrated linear surrogate model reproduces both replacement years and limits the cost deviation to 0.2%, although energy not served remains 31.8% below the reference. A peak-informed calibrated 12-day representation preserves replacement timing but reports zero energy not served, while replacing the preserved peak day with the maximum daily-energy-deficit day substantially overstates energy not served because representative-day closure alters the battery state surrounding the critical event. The results show that modeling fidelity is metric-dependent and should be selected according to the lifecycle outcome to be preserved.

0.10

Large Language Model-Empowered Intelligent Agent for Adaptive Fast-Charging Control of Lithium-Ion Batteries

cs.AI ·2026-11-13 ·Joey Chan, Haoyu Pan, Zhen Chen, ErShun Pan
hot direction similarity 0.58
Abstract · 9 pages, 5 figures, 6 tables

Fast charging of lithium-ion batteries is a multi-objective control problem that requires reducing charging time and sustaining high energy throughput while suppressing accelerated degradation and safety-critical electrochemical reactions. Conventional protocols are easy to implement but have limited ability to adapt to variations in battery chemistry, operating conditions, and aging state. Model-based optimization and conventional data-driven control often require accurate models, costly iterative search, or task-specific policies. We develop a large language model (LLM)-empowered intelligent agent for adaptive battery fast-charging control. In this closed-loop framework, the agent interprets structured battery states, generates executable charging actions, observes the resulting battery response, and continuously adjusts subsequent decisions. We construct a large-scale simulation corpus with PyBaMM across five battery chemistries and 11 parameter sets and convert the resulting state-action-response trajectories into structured process data for agent training. Our two-stage strategy combines supervised fine-tuning (SFT) and Group Relative Policy Optimization (GRPO). SFT establishes battery-control semantics and feasible decision priors from simulation-derived demonstrations. GRPO aligns the agent with a multi-objective control objective covering energy throughput, degradation mitigation, and operational constraints. Closed-loop simulations show that, under matched energy-throughput requirements, the agent achieves longer cycling life than conventional charging baselines and optimization-based strategies across heterogeneous battery configurations. This study provides a simulation-grounded proof of concept for using LLM agents as sequential decision makers in battery management and takes a step toward language-model-enabled control of physical energy systems.

0.26

Reducing Combinatorial Redundancy in Mixed-Integer MPC via Ranking-Based Feasible-Set Restriction for Reconfigurable Batteries

eess.SY ·2026-09-25 ·Albert Škegro, Torsten Wik, Changfu Zou
similarity 0.58
Abstract · 8 pages, 3 figures. Code: https://doi.org/10.5281/zenodo.22885592

When mixed-integer model predictive control must select which of several similar units to activate, many same-size selections can yield closely spaced predicted outcomes, and branch-and-bound may fail to certify optimality within one sampling period. We propose a ranking-based feasible-set restriction for this class of decisions: the units are ordered by a suitability score computed at each sampling instant, and a monotone constraint permits only the top-ranked units to be active. The optimizer then chooses only how many units to activate, so the admissible selections per prediction stage grow linearly instead of combinatorially, while the model, cost function, and remaining constraints are retained. We instantiate the method for reconfigurable battery packs in which each series-connected cell can be bypassed, scoring cells with fixed weights on normalized state of health, state of charge, and voltage headroom. In a 20-cell simulation over a dynamic drive cycle with a 1 s limit per online solve, all active online restricted solves terminate at the root node with certified optimality, compared with 77.83% certification for unrestricted subset selection, and the 95th-percentile solver time is lower by a factor of 13.4. The cycle-mean cell-to-cell standard deviation in state of charge falls 8.7-fold without power curtailment, at the expense of 3.45 times as much cell switching. Solving both problems from identical states along two trajectories shows that the restriction raises the optimal cost by 0.26% and 0.14% on average at states where both solves are certified and uncurtailed.

0.33

A Framework for Discharge Time Prediction of Energy Storage Units Based on Coupled Dynamics and Multi-Factor Aging Models

cs.CE ·2026-09-10 ·Jiaye Yang, Hansheng Su, Wangzi Zhu
published similarity 0.56
Abstract · 6 pages, 4 figures. Accepted for presentation at the 2026 IEEE Industrial Electronics and Applications Conference (IEACon 2026)

This paper presents a physically interpretable framework for predicting time to empty (TTE) in portable embedded systems. The framework couples usage-driven load-power decomposition, electrical power-voltage-current closure, a semi-empirical aging model, and SOC-temperature dynamics. Smartphone telemetry is mapped to battery current through an interpretable load model and conversion-efficiency correction. Battery capacity loss is modeled by combining Arrhenius temperature dependence, SEI diffusion behavior, and cycle-related power-law degradation. The coupled dynamic model then predicts TTE under different initial SOC values, ambient temperatures, and usage profiles. Chronological hold-out evaluation on a 6.9-h smartphone discharge session yielded a current RMSE of 0.0095 $\pm$ 0.0006 A, a temperature RMSE of 2.93 $\pm$ 0.24$^\circ$C, and a TTE MAPE of 4.81 $\pm$ 0.61%. Evaluation on NASA cell B0005 produced a capacity-loss RMSE of 0.031 Ah. Baseline, ablation, and counterfactual analyses further illustrate the contributions of thermal and aging corrections and the relative influence of load features. The results demonstrate the feasibility and interpretability of the proposed framework, while broader validation across devices and batteries remains necessary.

0.34

FlowBatt: Flow Matching for Probabilistic Battery Degradation Prediction

cs.LG physics.chem-ph ·2026-11-02 ·Hamidreza Eivazi, Eslam Sharaawy, Stefan Wittek, André Hebenbrock, Raphael Ginster +1 more
top venuebenchmark similarity 0.56
Abstract · 29 pages, including references, appendices, and the checklist

Battery degradation remains a central challenge in the development and broad application of sustainable energy technologies. Accurate degradation prediction is challenging, as battery aging emerges from complex and heterogeneous interactions among cycling behavior, operating conditions, and cell chemistry. Existing machine-learning approaches typically focus on deterministic end-of-life predictions or modeling degradation curves within fixed chemistry settings, leaving probabilistic state of health (SOH) trajectory modeling across heterogeneous chemistries underexplored. We introduce FlowBatt, a use-inspired conditional generative framework that adapts flow matching with a diffusion transformer (DiT) backbone to battery degradation trajectory modeling. FlowBatt models full SOH trajectories as probabilistic degradation processes conditioned on early-cycle capacity data. To strengthen this conditioning pathway, we use explainable AI analysis to diagnose and improve the encoder that maps early-cycle capacity matrices into conditioning vectors. We evaluate FlowBatt on five public benchmark settings spanning diverse chemistries and aging conditions, comparing it with supervised and diffusion-based trajectory models as well as established baselines for remaining useful life (RUL) prediction under shared data splits. FlowBatt achieves the best trajectory-wise SOH prediction performance on all five datasets, with errors below 2.5%, and delivers competitive RUL prediction performance. By generating multiple plausible trajectories, FlowBatt provides empirical prediction intervals for battery degradation modeling. These results indicate that flow-matching-based trajectory modeling is a promising framework for probabilistic battery health prediction.

0.38

HorizON: A Multi-Horizon Deep Operator Network for Property Prediction of Organic Battery Stacks

cs.LG cond-mat.mtrl-sci ·2026-10-27 ·Subhash V. S. Ganti, Lukas Woelfel, Arla Diengdoh, Tzvetan Mihaylov, Thomas Nevolianis +2 more
similarity 0.56
Abstract

Transition-metal-based batteries rely on critical elements such as lithium, cobalt, and nickel. Their extraction creates environmental and supply-chain challenges. Organic electrode materials (OEMs) reduce this reliance and provide broad molecular tunability. However, OEM-based batteries still show limited long-term cycling stability. Their design also requires the joint optimization of coupled metrics such as voltage, specific capacity, capacity retention, and energy density. These metrics depend on the full battery stack and on the interactions among its components rather than on the active material alone. In our previous work, we developed a data-fusion multi-task framework for average discharge voltage and first-cycle specific capacity. Both targets are single-valued. Here, we extend that framework to multi-horizon prediction by predicting a property at every cycle of a discharge trajectory rather than at a single cycle. Our multi-fidelity and Multi-horizon Deep Operator Network learns DFT redox potentials and cycle-dependent specific-capacity trajectories within one model. We train it on complete battery-stack representations and usage conditions, so it learns battery-stack interactions rather than cathode-only effects. This framework supports long-term property prediction, inverse design, and process optimization for organic battery systems.

0.15