CS Paper Radar

Quantile-Led Feature Extraction for Multi-Horizon Predictive Maintenance in Industrial Manufacturing Systems

David J Poland, Daniele Ravi, Na Helian

cs.AI ·submitted 2026-09-07 14:13 UTC · v1

Abstract

In data-driven predictive maintenance (PdM), feature extraction is usually treated as fixed preprocessing: a descriptor set is chosen once and reused while the downstream model or forecasting horizon changes. This paper isolates the representation-learning stage and presents a quantile-led feature-extraction framework based on a dual-stage MLP-QRNN hierarchy. QRNN1 learns a broad ten-quantile conditional distribution for each sensor channel, while skip-connected QRNN2 refines a retained mid-tail quantile set into compact, channel-resolved, distribution-aware features. A fixed thirteen-pipeline ablation spans 1-hour, 70-hour, and 30-day regimes across 72 machines in 9 industrial facilities, with the downstream temporal classifier held fixed within each regime. Increasing the retained mid-tail set from two to four quantiles improves 30- and 60-minute F1-score, reaching 75.92% and 72.44% with attention enabled. The results also show that representations do not transfer reliably beyond their design horizon unless feature capacity, temporal embedding, activation strategy, and sensor breadth are scaled with the forecasting task. The unmodified short-horizon extractor falls to 42.90% F1 at 70 hours, whereas horizon-conditioned extractors reach 60.38% at 70 hours and 79.97% at 30 days. The framework therefore supports treating PdM feature extraction as a horizon-dependent representational stage rather than fixed preprocessing.

Closest papers

Nearest neighbours by meaning across the whole index.

Long Horizon Transformer Quantile Fault Prediction for Multi Site Industrial Predictive Maintenance

cs.AI ·2026-09-04 ·David J Poland, Daniele Ravi, Na Helian
similarity 0.79
Abstract

Long-horizon predictive maintenance requires models to distinguish slowly evolving degradation from normal operating-regime variation over planning windows measured in days rather than hours. This paper evaluates whether an explicit conditional-quantile representation provides an informative classifier interface for this problem. The proposed TQRNN30d framework combines a dual-stage quantile regression neural network (QRNN) feature extractor with a multi-stream temporal fusion classifier. Each hourly word of 81-channel machine behaviour is mapped to a 324-dimensional quantile-state representation, and 720 ordered hourly words form the 30-day document supplied to the long-horizon model. The classifier fuses quantile states with dynamic covariates, channel-level static metadata, and a 168-hour latent-history stream using gated residual processing, causal recurrent encoding, and metadata-conditioned cross-modal attention. A bounded instability-aware signal derived from sustained one-word-ahead prediction-error divergence provides auxiliary memory modulation at the longest horizon. Evaluation uses a machine-disjoint 43/14/15 train/validation/test allocation across 72 machines in nine manufacturing facilities. At 30 days, TQRNN30d achieves 79.97% F1, 80.18% recall, 81.82% precision, 82.39% accuracy, and 0.820 ROC-AUC. It leads all 18 evaluated baselines at the 7-, 14-, and 30-day fixed-threshold comparisons, with the largest F1 advantage at 14 days. The results support held-out-machine performance within the observed homogeneous nine-facility fleet, but do not establish unseen-site, cross-equipment, or cross-sector generalisation.

0.16

Uncertainty and Business-Aware Remaining Useful Life Estimation for Semiconductor Manufacturing

cs.LG ·2026-08-26 ·Davide Frizzo, Francesco Borsatti, Gian Antonio Susto
similarity 0.63
Abstract · Submitted to IEEE Transactions on Semiconductor Manufacturing

Remaining Useful Life (RUL) estimates guide maintenance in semiconductor manufacturing, where a late intervention can disrupt production but an early one discards usable equipment life. A single prediction does not express the uncertainty needed to choose between these outcomes. We combine Deep Learning (DL) sequence models with Simoultaneous Quantile Regression (SQR) to estimate RUL at selectable quantile levels, and evaluate maintenance decisions using Unexpected Breaks (UB), Unexploited Lifetime (UL), and a cost-weighted objective. On the $F_1$ fault mode of the 2018 PHM Data Challenge (PHM18) ion-milling dataset, we compare recurrent, Transformer, and State Space Models (SSM) architectures. Diagonal State Spaced (S4D) gives the strongest overall RUL accuracy across the evaluated quantiles. Varying the quantile and maintenance window exposes the trade-off between failure risk and early intervention; under the examined cost ratios, the resulting decisions have lower cost than the Preventive Maintenance (PvM) baselines.

0.22

IPM-FM: A Foundation Model with Consensus Feature Selection for Industrial Process Monitoring

cs.LG cs.AI ·2026-09-08 ·Liang Cao, Weide Liu, Yan Qin, Jun Cheng, Weisi Lin +1 more
similarity 0.61
Abstract

Industrial process monitoring is fundamental to the safety and economic performance of modern process plants. Current practice remains a one-task-one-model paradigm that is label-inefficient and prone to degradation under operating drift. Foundation models have reshaped language, vision, and generic time-series forecasting, but it has not been adapted to industrial process monitoring. This setting poses domain-specific challenges, including safety-critical decisions and asymmetric sampling between process variables and laboratory measurements. We propose the industrial process monitoring foundation model (IPM-FM). It first learns general-purpose representations from unlabeled industrial process data through self-supervised pretraining, then adapts to specific monitoring tasks using a small amount of task-labeled data, and finally produces calibrated predictions through an uncertainty-aware prediction head. IPM-FM integrates a self-supervised Informer backbone with a multi-criteria consensus feature selector, a recursive lag-feature regression head, and a calibrated Monte Carlo dropout uncertainty module. On a seven-year hydrotreater dataset for diesel flash-point soft sensing, IPM-FM attains an RMSE of 2.99, $R^2$ of 0.50, and 97\% coverage of its 95\% predictive interval, outperforming the strongest classical and from-scratch sequence baselines by 8.3\% and 14.6\% in RMSE respectively, supporting the viability of a unified pretraining--adaptation framework for industrial process monitoring.

0.29

FreqCondNorm: Towards Cross-domain Predictive Maintenance through a Frequency-Conditioned Transformer Foundation Model

cs.AI ·2026-09-17 ·Zaynab Raounak, Camille LHermine, Zhiguo Zeng
similarity 0.61
Abstract

Deep learning predictive maintenance models suffer from poor transferability across machines and operating conditions, especially when labelled data are scarce and signals span five orders of magnitude in sampling frequency (1 Hz to ~100 kHz). We propose FreqCondNorm, a Transformer-based architecture that introduces a FiLM-style frequency-conditioned normalization layer to unify heterogeneous time-series within a single model. The architecture is pretrained on five public predictive maintenance datasets (CWRU, MFPT, UOC18, PRONOSTIA, CMAPSS) using masked auto-encoding and contrastive learning with balanced domain sampling. On fault diagnosis, the model achieves 99.2% accuracy on CWRU (+6.4 pp over CNN) and 82.1% zero-shot accuracy on MFPT, demonstrating strong transfer across sampling frequencies. However, the approach does not improve remaining useful life prediction, suggesting a mismatch between pretraining and RUL objectives that warrants future investigation.

0.22

Physical-Variable-Informed Deep Learning for Robust Diagnosis in Industrial Fluid Transport Systems

cs.LG cs.AI ·2026-10-20 ·Yu Sha, Junqi Tao, Dixin Zhou, Horst Stoecker, Domagoj Vnucec +2 more
similarity 0.60
Abstract · 29 pages, 5 figures

Industrial fluid transport systems are monitored through heterogeneous sensing streams, but robust fault diagnosis remains difficult because response signals vary with operating conditions and differ from physical variables in sampling rate, observation duration and data granularity. To address these challenges, we propose a physical-variable-informed deep learning framework (PhyNet) for robust fault diagnosis under real-world sampling heterogeneity. PhyNet treats physical variables as global operating constraints and response signals as local diagnostic evidence. Its physical-to-response cross-attention mechanism connects sequence-level physical-variable tokens with a learnable global response token, enabling interaction without strict temporal alignment. Across four benchmarks, including three real-world cavitation datasets and one public two-phase-flow dataset, PhyNet achieves the best performance across all evaluated metrics. Class-wise analyses, together with attention and masking analyses, show improved discrimination of ambiguous states and indicate that physical variables meaningfully constrain local response interpretation. These findings demonstrate a deployment-oriented approach to robust diagnosis in heterogeneous industrial environments.

0.33

Benchmarking Hybrid Deep Learning Architectures for Predictive Maintenance in Industry 4.0

cs.LG ·2026-09-18 ·Zhengyang, Gu, Joseph E. Hernandez, Thomas Cook, John Burtenshaw +2 more
published similarity 0.60
Abstract · Published in: 2026 IEEE International Conference on AI and Data Analytics (ICAD)

Predictive maintenance in Industry 4.0 refers to using data from sensors, machines, and production systems to estimate when equipment is likely to fail, so maintenance can be planned before a breakdown occurs [1]. However, a model that predicts maintenance may work perfectly in the lab but fail unexpectedly when applied to real factory data [2]. To solve this "reliability" gap, we evaluated six deep learning architectures across more than 700 experimental runs. We focused on the two dominant approaches in the field: Recurrent Neural Networks (RNNs), which process data step-by-step, like reading a sentence [3], and Transformers, a recent dominant approach, which look at the entire sequence at once to spot important connections [4]. We examined whether Transformers still outperform recurrent neural networks (RNNs) when the data includes noise [5]. We found that while Transformers excelled at tracking stable, slow-moving processes, they tend to overreact to chaotic data, mistakenly taking sensor noise for meaningful signals [6]. We also found that the hybrid method that combines a Long Short-Term Memory (LSTM) layer with a Transformer layer is more resilient to noisy data from factory shops [7]. Functioning as a noise filter, the LSTM smooths out data volatility, allowing the Transformer to focus on the bigger picture without being distracted [8]. The hybrid model did not just improve accuracy; it proved to be significantly more consistent than complex models, delivering reliable predictions regardless of how chaotic the underlying system became.

0.59

Cross-Domain Joint-Embedding Pretraining For Heterogeneous Industrial Time Series

cs.LG cs.AI ·2026-11-02 ·Jonathan Adam Rico, Nagarajan Raghavan, Senthilnath Jayavelu
similarity 0.58
Abstract · Submitted to International Conference on Acoustics, Speech, and Signal Processing (ICASSP) on Sept. 24, 2026

Industrial predictive maintenance and manufacturing tasks frequently contain abundant sensor measurements, but with limited labeled data. We investigate cross-domain self-supervised pretraining using joint-embedding predictive architecture for heterogeneous industrial time series (JEPA-HITS), which learns one encoder from various domains such as battery, semiconductor chemical mechanical planarization (CMP), computer numerical control (CNC) machining, and bearing while preserving dataset-specific temporal scales. We evaluate representation reuse on regression and classification problems under reduced-label downstream training, and leave-one-domain-out (LODO) pretraining. Compared with the same architecture initialized randomly, LODO pretraining reduces RMSE from 10.72 to 7.95 on battery remaining useful life (RUL), 4.34 to 3.89 on CMP, and 13.53 to 11.72 on tool wear regression, while improving bearing fault diagnosis macro-F1 from 0.547 to 0.737. Overall results suggest that unlabeled time series measurements from heterogeneous industrial processes can provide reusable representations for downstream learning with limited labeled data.

0.17

Self-Supervised Attention-Based Virtual Metrology for CMP MRR Prediction

cs.LG cs.AI ·2026-11-12 ·Jonathan Adam Rico, Nagarajan Raghavan, Senthilnath Jayavelu
similarity 0.58
Abstract · Submitted to the IEEE International Symposium on Semiconductor Manufacturing (ISSM 2026)

Chemical mechanical planarization (CMP) is a critical semiconductor manufacturing process where material removal rate (MRR) is a key metric for process monitoring and advanced process control (APC). Virtual metrology enables MRR estimation from process time series signals, supporting run-to-run(R2R) control and process optimization while reducing reliance on physical metrology. Existing approaches typically rely on simplified linear assumptions or require handcrafted feature engineering. In this paper, we propose Global Regression Pretraining(GREP), a self-supervised, attention-based framework for CMP MRR prediction. GREP learns temporal representations from unlabeled sensor signals through global proxy-target regression, followed by supervised fine-tuning for MRR estimation. The framework is evaluated against a feature-engineered supervised baseline under three conditions: limited labeled data, sensor noise, and temporal process drift. Experiments on the PHM 2016 CMP dataset demonstrate competitive performance under limited labeled-data conditions, with improvements in selected cases and performance largely comparable to the baseline across different labeled-data fractions. Both models exhibit relatively small changes in prediction error with increasing noise, while GREP achieves a 17.0% RMSE reduction in the final temporal interval.

0.22