CS Paper Radar

Self-Supervised Attention-Based Virtual Metrology for CMP MRR Prediction

Jonathan Adam Rico, Nagarajan Raghavan, Senthilnath Jayavelu

cs.LG cs.AI ·submitted 2026-11-12 02:01 UTC · v1

Abstract

Chemical mechanical planarization (CMP) is a critical semiconductor manufacturing process where material removal rate (MRR) is a key metric for process monitoring and advanced process control (APC). Virtual metrology enables MRR estimation from process time series signals, supporting run-to-run(R2R) control and process optimization while reducing reliance on physical metrology. Existing approaches typically rely on simplified linear assumptions or require handcrafted feature engineering. In this paper, we propose Global Regression Pretraining(GREP), a self-supervised, attention-based framework for CMP MRR prediction. GREP learns temporal representations from unlabeled sensor signals through global proxy-target regression, followed by supervised fine-tuning for MRR estimation. The framework is evaluated against a feature-engineered supervised baseline under three conditions: limited labeled data, sensor noise, and temporal process drift. Experiments on the PHM 2016 CMP dataset demonstrate competitive performance under limited labeled-data conditions, with improvements in selected cases and performance largely comparable to the baseline across different labeled-data fractions. Both models exhibit relatively small changes in prediction error with increasing noise, while GREP achieves a 17.0% RMSE reduction in the final temporal interval.

Comment
Submitted to the IEEE International Symposium on Semiconductor Manufacturing (ISSM 2026)

Closest papers

Nearest neighbours by meaning across the whole index.

IPM-FM: A Foundation Model with Consensus Feature Selection for Industrial Process Monitoring

cs.LG cs.AI ·2026-09-08 ·Liang Cao, Weide Liu, Yan Qin, Jun Cheng, Weisi Lin +1 more
similarity 0.70
Abstract

Industrial process monitoring is fundamental to the safety and economic performance of modern process plants. Current practice remains a one-task-one-model paradigm that is label-inefficient and prone to degradation under operating drift. Foundation models have reshaped language, vision, and generic time-series forecasting, but it has not been adapted to industrial process monitoring. This setting poses domain-specific challenges, including safety-critical decisions and asymmetric sampling between process variables and laboratory measurements. We propose the industrial process monitoring foundation model (IPM-FM). It first learns general-purpose representations from unlabeled industrial process data through self-supervised pretraining, then adapts to specific monitoring tasks using a small amount of task-labeled data, and finally produces calibrated predictions through an uncertainty-aware prediction head. IPM-FM integrates a self-supervised Informer backbone with a multi-criteria consensus feature selector, a recursive lag-feature regression head, and a calibrated Monte Carlo dropout uncertainty module. On a seven-year hydrotreater dataset for diesel flash-point soft sensing, IPM-FM attains an RMSE of 2.99, $R^2$ of 0.50, and 97\% coverage of its 95\% predictive interval, outperforming the strongest classical and from-scratch sequence baselines by 8.3\% and 14.6\% in RMSE respectively, supporting the viability of a unified pretraining--adaptation framework for industrial process monitoring.

0.29

Cross-Domain Joint-Embedding Pretraining For Heterogeneous Industrial Time Series

cs.LG cs.AI ·2026-11-02 ·Jonathan Adam Rico, Nagarajan Raghavan, Senthilnath Jayavelu
similarity 0.69
Abstract · Submitted to International Conference on Acoustics, Speech, and Signal Processing (ICASSP) on Sept. 24, 2026

Industrial predictive maintenance and manufacturing tasks frequently contain abundant sensor measurements, but with limited labeled data. We investigate cross-domain self-supervised pretraining using joint-embedding predictive architecture for heterogeneous industrial time series (JEPA-HITS), which learns one encoder from various domains such as battery, semiconductor chemical mechanical planarization (CMP), computer numerical control (CNC) machining, and bearing while preserving dataset-specific temporal scales. We evaluate representation reuse on regression and classification problems under reduced-label downstream training, and leave-one-domain-out (LODO) pretraining. Compared with the same architecture initialized randomly, LODO pretraining reduces RMSE from 10.72 to 7.95 on battery remaining useful life (RUL), 4.34 to 3.89 on CMP, and 13.53 to 11.72 on tool wear regression, while improving bearing fault diagnosis macro-F1 from 0.547 to 0.737. Overall results suggest that unlabeled time series measurements from heterogeneous industrial processes can provide reusable representations for downstream learning with limited labeled data.

0.17

Streaming Virtual Metrology via Lightweight Adaptation under Temporal Distribution Shifts

cs.LG ·2026-10-31 ·Doyun Choi, Cheonwoo Lee, Younghyun Han, Kiwook Han, Jinkook Park +3 more
published similarity 0.65
Abstract · Accepted at IEEE BigData 2026. 10pages

Virtual metrology (VM) aims to estimate costly or delayed metrology variables from heterogeneous sensor signals and in-line measurements, and it acts as a critical component of semiconductor manufacturing. While recent data-driven models have improved VM accuracy, most are trained in batch settings and assume stationary data distributions. In practice, however, production environments evolve continuously due to equipment degradation, process adjustments, and maintenance events, making conventional batch-trained VM models difficult to maintain under temporal distribution shifts. In this work, we propose GRAPE (Global Regression with Adaptive Prediction Enhancement), a practical online learning framework for VM in evolving wafer-processing environments. GRAPE integrates a stable global predictor based on interpretable representations with two lightweight streaming adapters that correct feature-level and environment-level shifts through online updates. Experiments on two real-world semiconductor manufacturing datasets, including chronologically held-out blind-test streams, show that GRAPE improves robustness and generalization under real temporal drift compared with both conventional batch-learning methods and existing online learning baselines.

0.37

LLMs as Master Forgers: Generating Synthetic Time Series Data for Manufacturing

cs.LG cs.AI ·2026-09-14 ·Mantek Singh, Jeshwanth Challagundla, Prateek Karnal, Gagan Ganapathy, Vineet Shah +1 more
top venuehighly cited similarity 0.59
Abstract · 7 pages, 4 figures. Published in the 2024 International Conference on Image Processing, Computer Vision and Machine Learning (ICICML)

This paper presents a novel framework leveraging Large Language Models (LLMs) to generate synthetic time series data for manufacturing processes. Motivated by the scarcity of labeled time-series data in real-world manufacturing settings, which hinders the development of robust machine learning models, we explore the potential of LLMs to learn complex temporal dependencies and generate realistic synthetic data. Our approach involves fine-tuning pre-trained LLMs on manufacturing process instructions and employing a Retrieval Augmented Generation (RAG) technique to enhance data diversity and realism. We evaluate our method against traditional time series modeling techniques like ARIMA and LSTMs, using quantitative metrics, PCA analysis, and downstream task performance (anomaly detection). Results demonstrate that our LLM-driven framework outperforms these baselines, generating high-quality synthetic time series data that effectively captures temporal dependencies and statistical properties of real manufacturing data, leading to improvements in downstream task performance.

0.78

Physical-Variable-Informed Deep Learning for Robust Diagnosis in Industrial Fluid Transport Systems

cs.LG cs.AI ·2026-10-20 ·Yu Sha, Junqi Tao, Dixin Zhou, Horst Stoecker, Domagoj Vnucec +2 more
similarity 0.59
Abstract · 29 pages, 5 figures

Industrial fluid transport systems are monitored through heterogeneous sensing streams, but robust fault diagnosis remains difficult because response signals vary with operating conditions and differ from physical variables in sampling rate, observation duration and data granularity. To address these challenges, we propose a physical-variable-informed deep learning framework (PhyNet) for robust fault diagnosis under real-world sampling heterogeneity. PhyNet treats physical variables as global operating constraints and response signals as local diagnostic evidence. Its physical-to-response cross-attention mechanism connects sequence-level physical-variable tokens with a learnable global response token, enabling interaction without strict temporal alignment. Across four benchmarks, including three real-world cavitation datasets and one public two-phase-flow dataset, PhyNet achieves the best performance across all evaluated metrics. Class-wise analyses, together with attention and masking analyses, show improved discrimination of ambiguous states and indicate that physical variables meaningfully constrain local response interpretation. These findings demonstrate a deployment-oriented approach to robust diagnosis in heterogeneous industrial environments.

0.33

MouldIt: Data Efficiency of Multi-Task Temporal Representation Learning in Injection Moulding

cs.LG cs.ROeess.SP ·2026-11-10 ·Abdullah Ayad
similarity 0.59
Abstract · 14 pages, 10 figures, 4 tables

Smart industrial solutions that can address multiple tasks require models that understand the underlying processes. We examine representation learning for modeling the injection moulding process as an example of such solutions. We consider its data efficiency and multi-modal benefit compared to classical machine learning alternatives. To this end, we synthesize a process-informed dataset based on a real reference cycle of an Erlanger Träger part. We then introduce MouldIt, a temporal convolution and attention based variational autoencoder that reconstructs in-mould signals, while classifying parts as acceptable or as one of our synthetic failure modes. We evaluate MouldIt on two tasks, known-class classification and unknown-class detection, across nine dataset sizes in single-modal and multi-modal settings. We compare it with an accept-all baseline and the classical methods k-nearest neighbors, logistic regression, random forests, and principal component analysis, which we adapt to support both tasks. MouldIt outperforms classical methods across both tasks from 4000 cycles in the single-modal setting and from 2000 cycles in the multi-modal setting. It achieves part sorting losses of 6.0 $\pm$ 0.7% and 1.0 $\pm$ 0.3% in the single-modal and multi-modal settings respectively, ranking first across all baselines and a combination of principal component analysis and random forests.

0.22

Quantile-Led Feature Extraction for Multi-Horizon Predictive Maintenance in Industrial Manufacturing Systems

cs.AI ·2026-09-07 ·David J Poland, Daniele Ravi, Na Helian
similarity 0.58
Abstract

In data-driven predictive maintenance (PdM), feature extraction is usually treated as fixed preprocessing: a descriptor set is chosen once and reused while the downstream model or forecasting horizon changes. This paper isolates the representation-learning stage and presents a quantile-led feature-extraction framework based on a dual-stage MLP-QRNN hierarchy. QRNN1 learns a broad ten-quantile conditional distribution for each sensor channel, while skip-connected QRNN2 refines a retained mid-tail quantile set into compact, channel-resolved, distribution-aware features. A fixed thirteen-pipeline ablation spans 1-hour, 70-hour, and 30-day regimes across 72 machines in 9 industrial facilities, with the downstream temporal classifier held fixed within each regime. Increasing the retained mid-tail set from two to four quantiles improves 30- and 60-minute F1-score, reaching 75.92% and 72.44% with attention enabled. The results also show that representations do not transfer reliably beyond their design horizon unless feature capacity, temporal embedding, activation strategy, and sensor breadth are scaled with the forecasting task. The unmodified short-horizon extractor falls to 42.90% F1 at 70 hours, whereas horizon-conditioned extractors reach 60.38% at 70 hours and 79.97% at 30 days. The framework therefore supports treating PdM feature extraction as a horizon-dependent representational stage rather than fixed preprocessing.

0.09

A Light Bilevel Refinement Aligns Self-Supervised Representations for Stronger Task-Specific Learning

cs.LG cs.AIcs.CV ·2026-09-27 ·Gustav Wagner Zakarias, Zheng-Hua Tan
hot direction similarity 0.57
Abstract

Self-supervised pretraining learns representations that are broadly transferable across downstream tasks, yet direct fine-tuning can be suboptimal due to misalignment between self-supervised and downstream task objectives, potentially degrading pretrained features beneficial to the downstream task. The BiSSL framework addressed this by introducing a transitional training stage formulated as a bilevel optimization problem, in which the downstream task objective guides the self-supervised learning process in refining pretrained representations to better facilitate subsequent fine-tuning. However, BiSSL relies on conventional bilevel optimization solving techniques whose costly implicit hypergradient approximations render the method increasingly impractical for contemporary model architectures. To make it efficient and scalable, we introduce BiSSLight, which combines M-FAC-based implicit gradient approximation with parameter-efficient fine-tuning via LoRA, enabling efficient application at larger scales that were previously impractical. Evaluation across multiple downstream tasks and contemporary model architectures shows that BiSSLight consistently improves downstream performance, with gains becoming more pronounced as model size increases despite stronger baselines. The method is highly computationally efficient, reducing computation time by more than a factor of ten compared to its predecessor on a ViT-H backbone.

0.29