CS Paper Radar

SwingBot: Learning Whole-Body Brachiation for Humanoid Robots

Yujie Xiong, Peng Zhai, Taixian Hou, Quancheng Qian, Cunwang Liu, Kangmai Hu, Long Yang, Zhiyan Dong, Lihua Zhang

cs.RO ·submitted 2026-09-09 15:01 UTC · v3

Abstract

Brachiation enables primates to move across overhead supports when ground paths are blocked, suggesting a complementary locomotion mode for robots operating in cluttered or hazardous environments. Bringing this capability to high-DoF humanoid robots is difficult because the controller must discover a long-horizon release-swing-capture sequence, coordinate alternating contacts with whole-body momentum, and act without reliable measurements of segment-relative displacement or hook-contact state. We present SwingBot, a learning framework for continuous humanoid brachiation with passive wrist hooks. SwingBot makes the task trainable by organizing learning around the structure of brachiation: biomimetic keyframes make rare release-swing-capture transitions reachable during early exploration, and recurrent privileged-state estimation provides compact position and contact latents for deployment. Hardware experiments demonstrate continuous bar traversal and robustness to payload, external disturbances and different bar spacings, showing that this formulation offers a practical route to whole-body robotic brachiation.

Comment
CORL2026

Closest papers

Nearest neighbours by meaning across the whole index.

Robust Brachiation on a Life-Sized Dual-Arm Robot Using Waypoint-Guided Reinforcement Learning

cs.RO ·2026-08-18 ·Ayumu Iwata, Kento Kawaharazuka, Keita Yoneda, Takahiro Hattori, Kei Okada
published similarity 0.75
Abstract · Accepted to 2026 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS)

Brachiation is a form of locomotion in which primates move primarily using their arms, enabling traversal in environments without footholds. However, this motion requires highly coordinated whole-body movement and precise timing control for bar grasping and release. As a result, achieving robust behavior on life-sized robotic platforms remains challenging. In this study, we present a reinforcement learning-based method to realize brachiation on a life-sized dual-arm robot. The core of the proposed approach is Waypoint-Guided Reinforcement Learning (WGRL), a learning framework for inducing non-linear and complex motions. For high-difficulty tasks where imitation learning data are unavailable, WGRL guides behavior acquisition by sparsely specifying waypoints for the end-effector trajectory, while whole-body motion is generated through reinforcement learning. In addition, by integrating the waypoint-following guidance with rewards based on task success and mechanical energy, and training in an environment designed for Sim-to-Real transfer, the proposed method achieves both forward progression and motion stability. The acquired behavior is evaluated through Sim-to-Sim experiments under monkey-bar environments with geometric variations and hardware experiments, confirming robust brachiation including failure recovery behavior. This study provides effective learning design guidelines for realizing arm-based locomotion on life-sized robotic hardware and expanding the traversable workspace of robots.

0.41

ReflexArc: Bottom-Up Integration of Instantaneous Tactile Reflexes into Whole-Body Humanoid Control

cs.RO ·2026-11-03 ·Mingyu Wang, Si Li, Ziqing Chen, He Wang, Li Yi
code/data similarity 0.68
Abstract · 8 pages, 6 figures

Humanoid robots operating in cluttered environments must react to unexpected contacts before the first impact peak, which arrives within tens of milliseconds. Learned whole-body policies running at 50 Hz introduce a policy-cycle delay and may suppress a protective withdrawal as a tracking error. To address these challenges, we propose ARC (Ascending Reflex Control), a bottom-up framework that integrates instantaneous tactile reflexes with learned whole-body control. ARC consists of two components: an instantaneous reflex pathway and bottom-up reflex integration. The reflex pathway detects hazardous contacts from full-body tactile sensing, solves a whole-body withdrawal pose, and delivers it directly to the motors within 10 ms. Bottom-up reflex integration combines reflex-in-the-loop policy learning, reflex-transparent policy alignment, and reflex-informed policy adaptation to sustain the withdrawal, maintain balance, and complete longer-horizon recovery. We deploy ARC on a Unitree G1 and evaluate three categories of hazardous contact. Compared with an otherwise identical reflex delayed by 20 ms, ARC reduces the first force peak by 34.1% and reduces the contact impulse from 0.2632 N s to 0.1225 N s (a 2.15x ratio). We further demonstrate protected motion tracking, teleoperation, and vision-free obstacle traversal guided by foot tactile sensing. Project page: https://minusmodulo.github.io/reflexarc-website/

0.28

FORGE: Force-Aware Multi-Granularity Control for Efficient Humanoid Loco-Manipulation

cs.RO ·2026-11-12 ·Liangjun Xing, Ke Fan, Kailin Li, Bin Wang, Xiaojie Niu +6 more
similarity 0.67
Abstract · 8 pages, 10 figures

Humanoid loco-manipulation requires coordinated locomotion, balance regulation, and manipulation under frequent contacts, making teleoperated demonstration collection difficult: a practical controller must simultaneously provide precision, stability, and contact awareness. We propose FORGE, a force-aware multi-granularity control system with a coarse-to-fine command space spanning velocity navigation, planar foot placement, wrist-pose tracking, and optional force-conditioning inputs. Policy training requires no full-body human motion trajectories or joint-angle references; deployment consumes only sparse bilateral wrist poses relative to the pelvis, coarse motion commands, and optional desired wrist-load inputs. For sustained contact, FORGE combines a momentum observer with a learned correction trained using simulator contact-force supervision. At deployment, it estimates low-frequency, wrist-equivalent interaction forces from proprioception and reconstructed low-level arm PD torques, without wrist force/torque sensors. A quasi-static virtual-target loop uses this estimate and an optional desired applied-force input to adapt the wrist target. A frozen locomotion prior and asymmetric residual actions stabilize manipulation-induced whole-body corrections. Experiments evaluate unified-control stability, task-space tracking, quasi-static wrist-equivalent force estimation, squeezing forces during sustained contact with a rigid box, and downstream diffusion-policy execution of a squat-and-lift task across payload conditions. Website: https://bb0928.github.io/forge/.

0.15

OATH: Object-Agnostic Tracking for Dexterous Hands, Enabling Rapid Physics-based Retargeting

cs.RO ·2026-10-09 ·Solvin Sigurdson, Prasanna Sriganesh, Juan Borbon, Joel Burdick, Dingqi Zhang +1 more
code/data similarity 0.66
Abstract · 8 pages, 7 figures, 3 tables. Project page: https://multiplylabs.github.io/oath/

Retargeting human demonstrations into dynamically feasible dexterous hand trajectories requires resolving complex contact physics, yet current methods either omit physical constraints or rely on computationally expensive sampling-based optimization in simulation. Reinforcement learning has previously been used to achieve planning and control through contact dynamics; however, standard policies require object-specific training and fail to generalize across arbitrary geometries. This work reframes physics-based retargeting as a residual learning problem, where we demonstrate that zero-shot generalization across objects relies on structured state representations. Specifically, formulating the observation space to include a localized contact-error signal guiding each robot link to its target coordinate on the object surface enables a single, unified residual policy to successfully grasp novel, unseen object geometries. Rolling out this policy in simulation on a kinematic reference trajectory yields a physics-based retargeter, OATH. Operating at 0.4 seconds of compute per second of reference, OATH achieves 2.4x faster-than-real-time performance and a 60-350x reduction in computational cost compared to sampling-based methods. The system recovers 58% of held-out and 54% of unseen-object DexYCB trajectories while maintaining a sub-2 cm tracking error.

0.29

Learning Agile Perceptive Traversal of Sparse 3D Structures for Humanoids

cs.RO ·2026-08-30 ·Efe Ongan, Chong Zhang, Boyang Sun, Andrei Cramariuc, Cesar Cadena +1 more
similarity 0.66
Abstract

Traversing sparse 3D structures requires humanoid robots to perceive thin, overhanging geometry while executing agile, accurate whole-body motions. We study this problem through monkey-bar traversal, where the robot must jump to the structure, traverse it through sparse bar interactions, and land safely. For this task, we present a reinforcement-learning-based perceptive control system that operates directly on observations from a head-mounted solid-state lidar. To extract task-relevant geometry from the sparse returns, the policy consumes the raw lidar scan through an attention-based encoder with recurrent memory. This policy is obtained by a phase-scheduled teacher- student pipeline that combines privileged experts for jumping up, brachiating, and jumping down. For transfer to hardware, we model lidar noise, battery-voltage sag, and actuator thermal limits, and equip the humanoid with passive hook end-effectors for robust bar interaction. On hardware, the resulting policy completes the full jump-up->brachiation->jump-down sequence in 14 of 15 trials across three bar configurations and reaches brachiation speeds up to 0.5 m/s. Beyond brachiation, the same perception backbone supports a separately trained policy that ducks beneath thin overhead obstacles with 2 cm cross-sections.

0.39

Whole-Body Dexterity

cs.RO cs.AIcs.LGeess.SY ·2026-10-15 ·Conor Mc Gartoll, An Dang, Pranay Thangeda, Arjun Gupta, Carolina Higuera +3 more
similarity 0.66
Abstract · 20 pages, 13 figures

Current humanoid dexterous manipulation remains largely confined to end-effectors and simple grasps, falling short of humans' ability to engage the entire body by bracing and sliding bulky objects against the arms and torso. We introduce Whole-Body Dexterity (WBD), a general framework that uses the robot's body and appendages as contact surfaces to grasp and manipulate objects. Our sim-to-real pipeline first generates a dataset of feasible whole-body grasps, then trains reinforcement-learning experts on a general any-to-any repositioning objective by sampling initial and goal grasps from the dataset, and distills these experts into a single policy that uses proprioception and object geometry. We show that the distilled policy transfers zero-shot to a real Unitree G1, where it repositions a basketball and a cardboard box to regions around the torso and completes a long-horizon task that stows a box under one arm, carries it from a shelf to a table, and places it. The controller operates interactively, steered by coarse motion references from a human teleoperator. Across real-world whole-body manipulation tasks, the distilled controller completes 90% of trials, compared with 18% for direct retargeting and 4% for a generalist whole-body controller.

0.39

DexTaG: Tactile-as-Guidance in Reinforcement Learning for Dexterous Manipulation

cs.RO ·2026-09-27 ·Han Yang, Yian Wang, Yunlong Song, Zhenjia Xu, Chuang Gan
similarity 0.65
Abstract

Glove-based motion capture is emerging as a scalable approach to collecting dexterous-hand demonstration data. However, due to the kinematic gap between the human and robot hand, the recorded human motions cannot be executed directly on the robot, especially for contact-rich tool-use tasks involving in-hand reorientation. Prior work bridges this gap in simulation through reinforcement learning (RL) or trajectory optimization, but the human contact pattern is hard to preserve under such formulations, often producing unnatural manipulation and unstable functional grasps. These methods also train a separate policy or solve a separate optimization for each reference trajectory, which is inefficient. To solve these problems, we propose DexTaG, a tactile-guided RL framework for dexterous manipulation. During training, tactile signals captured by the glove guide policy search toward the measured human contact pattern, reducing reliance on precise reference geometry for contact supervision. To improve efficiency, we train a single generalizable retargeter jointly on all training trajectories of the same object. The retargeter is further distilled into a tactile-free student controller conditioned on the target object trajectory for real-world deployment. On marker-pen and hammer manipulation tasks, DexTaG learns natural, contact-rich behaviors that baselines with distance-based contact heuristics fail to learn, generalizes to held-out trajectories of the same object and task, and outperforms single-trajectory baselines on OakInk2.

0.19

HULK: Learning Whole-Body Forceful Loco-Manipulation for Humanoids

cs.RO cs.LG ·2026-10-06 ·An Dang, Arturo Flores Alvarez, Yu-Ming Chen, Conor Mc Gartoll, Helen Sun +3 more
similarity 0.64
Abstract · 16 pages, 7 figures, IEEE International Conference on Robotics and Automation 2027

Humanoid loco-manipulation of large, heavy objects demands forceful interaction across the entire body. However, such payloads shift a humanoid's center of mass and impose sustained loads across the upper body, challenging balance and command tracking. We present HULK, a whole-body control framework for forceful loco-manipulation. Using model predictive control (MPC) to guide reinforcement learning with predictions of the loaded dynamics, we train two teachers: one tracks arm motions under wrist forces, and the other locomotes while holding large objects against the body. A capture-point control barrier function augments the wrist-force teacher during training to improve balance under load. We distill both teachers into a single policy. Evaluation spans simulation and the Unitree G1. In simulation, the teacher with the barrier function achieves the lowest forward and lateral velocity tracking errors at 10 kg per arm among evaluated controllers and reduces aggregate divergent component of motion (DCM) excursion magnitude by 35.7% relative to MPC-guided reinforcement learning alone. Our wrist-force teacher withstands torso push disturbances of up to 130 N.

0.24