CS Paper Radar

HULK: Learning Whole-Body Forceful Loco-Manipulation for Humanoids

An Dang, Arturo Flores Alvarez, Yu-Ming Chen, Conor Mc Gartoll, Helen Sun, Aaron Ames, Nima Fazeli, Manikantan Nambi

cs.RO cs.LG ·submitted 2026-10-06 18:33 UTC · v1

Abstract

Humanoid loco-manipulation of large, heavy objects demands forceful interaction across the entire body. However, such payloads shift a humanoid's center of mass and impose sustained loads across the upper body, challenging balance and command tracking. We present HULK, a whole-body control framework for forceful loco-manipulation. Using model predictive control (MPC) to guide reinforcement learning with predictions of the loaded dynamics, we train two teachers: one tracks arm motions under wrist forces, and the other locomotes while holding large objects against the body. A capture-point control barrier function augments the wrist-force teacher during training to improve balance under load. We distill both teachers into a single policy. Evaluation spans simulation and the Unitree G1. In simulation, the teacher with the barrier function achieves the lowest forward and lateral velocity tracking errors at 10 kg per arm among evaluated controllers and reduces aggregate divergent component of motion (DCM) excursion magnitude by 35.7% relative to MPC-guided reinforcement learning alone. Our wrist-force teacher withstands torso push disturbances of up to 130 N.

Comment
16 pages, 7 figures, IEEE International Conference on Robotics and Automation 2027

Closest papers

Nearest neighbours by meaning across the whole index.

CompliantWBC: Whole-Body Compliance for Heavy Humanoids via Force Latent Estimation and Residual Impedance Targets

cs.RO ·2026-09-27 ·Tan-Dzung Do, Cuc T. Trinh, Tuan Dat Phuong, Chien Le, Thanh Ly +2 more
similarity 0.75
Abstract · Project website: https://dotandung.github.io/compliantwbc/

Whole-body compliant control is essential for deploying heavy humanoids under high payload in human-centric environments. Most prior force-aware learning-based pipelines focus on end-effector resistance, per-link upper-body springs, or end-effector stiffness modulation, leaving arbitrary-site perturbations on heavy platforms with lower-body engagement largely unaddressed. We close this gap with CompliantWBC comprising: (1) A base policy trained with RL to maximize compliance-fidelity reward, guided by a multi-site whole-body impedance reference controller, extending classical Cartesian impedance to any controlled link; (2) A bounded residual policy that edits the per-link impedance equilibrium over a frozen base, correcting the coarse but structured wrench estimate supplied by a force encoder co-trained behind a gradient barrier; (3) A Phong-weighted force-origin sampler with an axis-decoupled pelvis anchor induces lower-body-inclusive compliance curriculum training via two interpretable parameters. We evaluate CompliantWBC in simulation against both compliant and stiff baselines, achieving best compliant fidelity of 2.58cm deviation from analytical solutions, and demonstrate it on a real heavy humanoid across static/dynamic force reaction, board wiping, squat under payload, and cooperative payload transport. Project website: https://dotandung.github.io/compliantwbc/

0.46

Humanoid Rickshaw Pulling: Whole-Body Locomotion under Coupled Wheeled Loads

cs.RO cs.LG ·2026-10-03 ·Yangzhi Yang, Xiansheng Lin, Zhaoming Xie, Xiaobin Xiong
similarity 0.75
Abstract

Humanoid robots could transport payloads substantially heavier than themselves by pulling passive wheeled vehicles instead of carrying the load. This capability, however, creates a coupled locomotion problem: the robot must maintain persistent upper-body contact while adapting to unknown, configuration-dependent forces arising from the payload, vehicle, and terrain. We present a whole-body control framework for humanoid rickshaw pulling that tracks commanded vehicle motion while preserving balance and stable grasps under uncertain load dynamics. During training, a privileged teacher exploits vehicle states, interaction forces, and load properties. Its actions and latent are distilled into a history-conditioned student that implicitly infers coupled dynamics from proprioceptive responses, followed by reinforcement-learning fine-tuning. Comparisons with \emph{No History} and \emph{Only History} baselines show that the resulting policy achieves accurate vehicle tracking while reducing vehicle oscillation, torso tilt, and actuation cost. Behavioral analysis shows that Unitree G1 propels the rickshaw and generates gait-synchronized whole-body reactions that stabilize its lateral and roll motions. Moreover, pulling redistributes joint effort and yields a lower robot-normalized cost-of-transport proxy than unloaded walking over most tested load--speed conditions. On hardware, a single policy performs starting, sustained pulling, turning, and stopping with both rigid payloads and human passengers, handling a loaded rickshaw mass of up to 115~kg without load-specific retuning. These results demonstrate robust heavy-load transportation through coordinated and persistent humanoid--vehicle interaction.

0.21

ReCo: Response-Consistent Locomotion with Policy-Aware MPC for Legged Manipulation

cs.RO ·2026-10-01 ·Kuankuan Sima, Yichao Gao, Chenxi Gu, Kefan Zhao, Lin Zhao
benchmark similarity 0.74
Abstract

Continuous legged manipulation requires accurate end-effector tracking while the base keeps walking. Combining reinforcement learning (RL) with model predictive control (MPC) suits this task: the learned policy provides robust locomotion, while MPC coordinates the base and arm to compensate for tracking errors. However, MPC can compensate only for base motion that it can predict, and a learned policy's command response varies with gait phase, contact, and payload. We present ReCo, a framework that couples response-consistent locomotion with policy-aware MPC for legged manipulation. Response shaping trains the policy to respond to commands consistently and repeatably across randomized dynamics. An identified closed-loop response model then lets MPC jointly plan locomotion commands and arm motion. On the simulation benchmark, ReCo reduces position and orientation root-mean-square error (RMSE) by 28.7% and 27.4% relative to the best baseline for each metric. Real-world experiments demonstrate onboard continuous legged manipulation with coordinated base and arm motion.

0.17

LAC: Linear and Angular Compliance for Humanoid Whole-body Control

cs.RO ·2026-08-26 ·Yang Liu, Zhongkai Gu, Wei Zhu, Mitsuhiro Hayashibe
similarity 0.74
Abstract

Real-world humanoid tasks involve physical interaction with objects and humans, yet current controllers either reject external forces as disturbances or restrict compliance to limited body links while ignoring angular effects. We present LAC, a general whole-body controller that simultaneously realizes commanded Linear and Angular Compliance for wrenches applied to the upper body. First, we synthesize whole-body compliant responses into a large-scale augmented dataset. Sampled force and couple events are imposed on contact frames extracted from human interaction data. At each contact link, the external force and a virtual torque from the passively yielding kinematic chain drive a virtual admittance under the commanded stiffness. Subsequently, teacher-student reinforcement learning trains a single policy to track the compliant motions under external wrenches. Finally, extensive simulation and real-world experiments demonstrate whole-body compliant responses to wrenches across the upper body, monotonic modulation over the full range of both stiffness commands, and applicability to teleoperated loco-manipulation tasks. Project website: https://lac-humanoid.github.io/

0.36

Brace Yourself: Task-Conditioned Environmental Bracing for Forceful Humanoid Manipulation

cs.RO ·2026-09-21 ·Zongyuan Zhang, Christopher Lehnert, Will N. Browne, Jonathan M. Roberts
similarity 0.73
Abstract · Submitted to IEEE Robotics and Automation Letters (RA-L). 8 pages, 6 figures. Video demonstration: https://youtu.be/zPrGLxWJzI4. This work h…

Forceful manipulation is challenging for humanoid robots because interaction forces can disturb whole-body balance. We introduce the Supporting Hand Strategy (SHS), which enables a humanoid to brace against the environment with one hand while performing forceful manipulation with the other. SHS optimises a task-conditioned support configuration that guides two synchronous reinforcement-learning policies, without human motion data or online whole-body trajectory planning. On a Unitree G1, SHS achieved usable contact forces up to 60 N, compared with a maximum sustained force of 13.5 N without environmental bracing, while substantially improving force tracking over a task-independent support configuration. The same policies generalised to different task regions without retraining. SHS therefore provides a simple mechanism for substantially extending humanoid forceful-manipulation capability.

0.37

DexWeave: Learning Dexterous Humanoid Loco-Manipulation from Human Demonstrations

cs.RO ·2026-09-28 ·Naichuan Sun, Haotian Shen, Yizhang Zhang, Luying Feng, Haoze Wang +3 more
code/data similarity 0.73
Abstract · 26 pages, 6 figures

Learning dexterous humanoid loco-manipulation from human demonstrations requires transferring not only human motion, but also the coordinated interaction structure underlying the demonstrated behavior. This is challenging because embodiment differences distort the coupling among body motion, wrist placement, finger articulation, and object interaction, while kinematically accurate references may still be difficult to realize under robot dynamics. We present DexWeave, a unified framework that connects interaction-consistent motion retargeting with anatomy-aware whole-body policy learning. DexWeave first employs a two-stage retargeting procedure that initializes body and hand motions with specialized solvers and subsequently performs coupled refinement over the upper-body interaction chain while preserving lower-body support. The resulting references are tracked by an anatomy-aware Transformer policy that represents anatomical regions as structured tokens and uses directed masked attention to model their dependencies, with object information selectively conditioning the upper-body pathway for dexterous interaction. The policy jointly outputs body and dexterous-hand actions and is trained directly with reinforcement learning, without pretrained tracking policies, teacher-student distillation, or subsequent residual refinement. DexWeave improves retargeting fidelity and interaction consistency while achieving higher manipulation performance and faster policy convergence than MLP baselines. We further deploy the learned policies on a physical Unitree G1 humanoid equipped with Inspire dexterous hands, demonstrating dexterous whole-body loco-manipulation in the real world. See our project page (https://dexweave.github.io) for videos.

0.50

Dataset-Free Compliant Humanoid Loco-Manipulation with Dynamic Online Posture

cs.RO ·2026-10-05 ·Seungho Yeom, Zhenyu Wu, Jaeyoung Huh, Diego Williams, Yuheng Zhi +2 more
similarity 0.73
Abstract

Most humanoid loco-manipulation controllers require human motion data to learn whole-body coordination and posture, leaving policies reliant on external sources to provide this data. We present OCLO (Online-posture Compliant LOco-manipulation), a humanoid loco-manipulation system trained without human motion data and commanded only through two end-effector targets. Because these targets do not uniquely determine whole-body posture, OCLO generates pelvis height and torso orientation online using an analytic reachability prior, further refined through policy-in-the-loop sampling with a task-agnostic cost. OCLO also learns whole-body compliance by displacing end-effector references according to measured forces through a spring-damper model, encouraging the legs, waist, and pelvis to yield to external loads. In simulation, using the reachability prior leads to a 77.8% success rate in acquiring the commanded reference, a vast improvement over the 37.8% success rate accomplished without the prior. Further, refinement reduces end-effector orientation error across all evaluated tasks. The same posture module improves a pretrained SONIC controller on four of five tasks. Without compliance training, policies tend to lose balance under disturbances rather than sacrifice tracking. On a Unitree G1, OCLO maintains balance under end-effector disturbances that cause its ablations to fail and performs seven loco-manipulation tasks, including crouched walking and picking up a box from a low surface. Project website: https://oclo-humanoid.github.io/

0.27

ForPC: Force-Aware Whole-Body Control for Precise Humanoid Cart Pushing

cs.RO ·2026-11-05 ·ZhenYu Zou, Xing Liu, ShiChuang Wang, YunLong Dong, LiNan Deng +3 more
similarity 0.72
Abstract · 14 pages, 7 figures, 4 tables. Project website: https://roboforpc.github.io/. Corresponding author: Cheng Cheng

Humanoid robots are expected to take over strenuous material handling in manufacturing, logistics, and healthcare, where operating existing wheeled carts would let them move heavy loads without modifying the workplace. However, humanoid cart pushing remains challenging because the bimanual grasp closes a force-coupled loop in which the contact wrenches that drive the cart also disturb the robot's balance, and payload changes alter the coupled dynamics. We propose ForPC, a force-aware whole-body control framework that regulates cart velocity through two-stage reinforcement learning. A locomotion prior is first trained under varied hand loads and upper-body postures to provide balance support. A force latent and a state latent are then inferred from onboard observations, without external force sensors, and fed to a residual policy that coordinates bounded arm, waist, and leg adjustments with base-velocity commands. Multi-objective rewards penalize bimanual internal opposition, grasp slip, and actuator saturation, encouraging the policy to apply contact force on demand without human demonstrations. Sim-to-sim experiments show that ForPC reduces cart-velocity RMSE by up to 68.2% relative to a locomotion-only baseline (Loco-only) and cross-track RMSE by up to 74.2% on the multi-bend route. Trained solely in simulation, the policy also transfers to a physical Unitree G1 without real-world training or fine-tuning and, with no payload-specific adjustment, pushes a cart carrying up to 30 kg at 0.5 m/s. These results suggest that humanoid robots could eventually replace humans for efficient material handling in daily life.

0.21