CS Paper Radar

Humanoid Rickshaw Pulling: Whole-Body Locomotion under Coupled Wheeled Loads

Yangzhi Yang, Xiansheng Lin, Zhaoming Xie, Xiaobin Xiong

cs.RO cs.LG ·submitted 2026-10-03 03:00 UTC · v2

Abstract

Humanoid robots could transport payloads substantially heavier than themselves by pulling passive wheeled vehicles instead of carrying the load. This capability, however, creates a coupled locomotion problem: the robot must maintain persistent upper-body contact while adapting to unknown, configuration-dependent forces arising from the payload, vehicle, and terrain. We present a whole-body control framework for humanoid rickshaw pulling that tracks commanded vehicle motion while preserving balance and stable grasps under uncertain load dynamics. During training, a privileged teacher exploits vehicle states, interaction forces, and load properties. Its actions and latent are distilled into a history-conditioned student that implicitly infers coupled dynamics from proprioceptive responses, followed by reinforcement-learning fine-tuning. Comparisons with \emph{No History} and \emph{Only History} baselines show that the resulting policy achieves accurate vehicle tracking while reducing vehicle oscillation, torso tilt, and actuation cost. Behavioral analysis shows that Unitree G1 propels the rickshaw and generates gait-synchronized whole-body reactions that stabilize its lateral and roll motions. Moreover, pulling redistributes joint effort and yields a lower robot-normalized cost-of-transport proxy than unloaded walking over most tested load--speed conditions. On hardware, a single policy performs starting, sustained pulling, turning, and stopping with both rigid payloads and human passengers, handling a loaded rickshaw mass of up to 115~kg without load-specific retuning. These results demonstrate robust heavy-load transportation through coordinated and persistent humanoid--vehicle interaction.

Closest papers

Nearest neighbours by meaning across the whole index.

ForPC: Force-Aware Whole-Body Control for Precise Humanoid Cart Pushing

cs.RO ·2026-11-05 ·ZhenYu Zou, Xing Liu, ShiChuang Wang, YunLong Dong, LiNan Deng +3 more
similarity 0.75
Abstract · 14 pages, 7 figures, 4 tables. Project website: https://roboforpc.github.io/. Corresponding author: Cheng Cheng

Humanoid robots are expected to take over strenuous material handling in manufacturing, logistics, and healthcare, where operating existing wheeled carts would let them move heavy loads without modifying the workplace. However, humanoid cart pushing remains challenging because the bimanual grasp closes a force-coupled loop in which the contact wrenches that drive the cart also disturb the robot's balance, and payload changes alter the coupled dynamics. We propose ForPC, a force-aware whole-body control framework that regulates cart velocity through two-stage reinforcement learning. A locomotion prior is first trained under varied hand loads and upper-body postures to provide balance support. A force latent and a state latent are then inferred from onboard observations, without external force sensors, and fed to a residual policy that coordinates bounded arm, waist, and leg adjustments with base-velocity commands. Multi-objective rewards penalize bimanual internal opposition, grasp slip, and actuator saturation, encouraging the policy to apply contact force on demand without human demonstrations. Sim-to-sim experiments show that ForPC reduces cart-velocity RMSE by up to 68.2% relative to a locomotion-only baseline (Loco-only) and cross-track RMSE by up to 74.2% on the multi-bend route. Trained solely in simulation, the policy also transfers to a physical Unitree G1 without real-world training or fine-tuning and, with no payload-specific adjustment, pushes a cart carrying up to 30 kg at 0.5 m/s. These results suggest that humanoid robots could eventually replace humans for efficient material handling in daily life.

0.21

HULK: Learning Whole-Body Forceful Loco-Manipulation for Humanoids

cs.RO cs.LG ·2026-10-06 ·An Dang, Arturo Flores Alvarez, Yu-Ming Chen, Conor Mc Gartoll, Helen Sun +3 more
similarity 0.75
Abstract · 16 pages, 7 figures, IEEE International Conference on Robotics and Automation 2027

Humanoid loco-manipulation of large, heavy objects demands forceful interaction across the entire body. However, such payloads shift a humanoid's center of mass and impose sustained loads across the upper body, challenging balance and command tracking. We present HULK, a whole-body control framework for forceful loco-manipulation. Using model predictive control (MPC) to guide reinforcement learning with predictions of the loaded dynamics, we train two teachers: one tracks arm motions under wrist forces, and the other locomotes while holding large objects against the body. A capture-point control barrier function augments the wrist-force teacher during training to improve balance under load. We distill both teachers into a single policy. Evaluation spans simulation and the Unitree G1. In simulation, the teacher with the barrier function achieves the lowest forward and lateral velocity tracking errors at 10 kg per arm among evaluated controllers and reduces aggregate divergent component of motion (DCM) excursion magnitude by 35.7% relative to MPC-guided reinforcement learning alone. Our wrist-force teacher withstands torso push disturbances of up to 130 N.

0.24

Stay Seated: Learning Omnidirectional Humanoid Locomotion on a Passive Mobile Chair with Casters

cs.RO ·2026-08-28 ·Kango Yanagida, Kazuki Miyazawa, Takato Horii
similarity 0.73
Abstract

Humanoid robots with quasi-direct-drive actuators continuously generate joint torque while standing, whereas seated humans delegate weight support to chairs during desk work. As a first step toward seated loco-manipulation, we study omnidirectional seated locomotion on a passive mobile chair, requiring unfixed pelvis-seat contact and intermittent foot-floor propulsion of the robot-chair system. We extend a standard standing velocity-tracking environment with a passive-chair model, seated-state rewards, critic-only chair observations, and task-tailored contact settings. The policy is learned without motion-imitation rewards; its actor uses only proprioception and velocity commands, without contact sensing or chair states. In random-command evaluation, the policies tracked omnidirectional commands through nearly all 20-s rollouts, and the best seated policies could outperform the Standing policy in velocity tracking. Across four training seeds, a $2^3$ full-factorial comparison of symmetry regularization (SY), foot-slip regularization (FS), and command curriculum (CC) showed that FS reduced CoT but increased tracking error and that some FS-only policies converged to stationary local optima. Combining FS with either SY or CC avoided this failure without retuning FS, while SY improved bilateral leg symmetry during longitudinal motion. Direction-resolved analysis showed CoT ordered backward $<$ lateral $\ll$ forward, with planted-leg extension in backward and lateral motion and knee flexion following heel contact in forward motion. The learned policy achieved zero-shot sim-to-real transfer to a Unitree G1 and generated omnidirectional seated locomotion.

0.03

CompliantBot: Learning Whole-Body Compliance across Task Interfaces for Humanoid Control

cs.RO ·2026-11-01 ·Haoyang Li, Keqi Zhu, Zhanxiang Cao, Yang Zhang, Yizhi Chen +2 more
similarity 0.72
Abstract · 12 pages, 8 figures, 5 tables

Humanoid controllers need the ability to yield to external forces while retaining the capacity to resume their original tasks. However, tracking objectives penalize the deviations needed for yielding, while relaxing tracking goals persistently can make task recovery harder. Existing approaches often rely on task-specific interaction command interfaces or constructed compliant motion data and reference trajectories, limiting the direct reuse of their compliance-training mechanisms across different task interfaces. We introduce CompliantBot, a compliance-training framework for motion tracking and velocity-command locomotion. It preserves the original task inputs and requires no preconstructed compliant data or target trajectories. A state-dependent interaction force field couples applied loads to the robot's motion, enabling local articulation and whole-body movement to change the forces experienced. A complementary force-magnitude reward encourages lower interaction loads, while task rewards are downweighted during loading and restored after release to coordinate yielding and task resumption. The trained policies use task inputs and proprioceptive history without explicit external-force measurements. Across both task interfaces, CompliantBot yields farther under constant pulls and experiences lower spring interaction loads than matched baselines, while resuming task tracking after force removal. CompliantBot achieves the highest task completion among the compared methods under stronger pulls. Power evaluations further show that CompliantBot has the lowest mean joint mechanical power among the compared methods. Real-robot demonstrations further illustrate compliant responses through arm motion, stepping, and body reorientation.

0.23

ReACT: Reflection-Consistent Modulation and Cross-Load Consistency for Humanoid Velocity Tracking Under Asymmetric Loads

cs.RO ·2026-11-10 ·Xianghui Wang, Aoran Fu, Liyou Luo, Shanze Wang, Xiaoyu Shen +2 more
similarity 0.71
Abstract

In recent years, humanoid loco-manipulation has progressed to whole-body grasping, lifting, and transport. A basic requirement underlying these tasks is carrying the object to its destination, which depends on the locomotion controller accurately executing velocity commands from the navigation policy. However, carrying an object in one hand introduces a persistent asymmetric upper-body load that can degrade velocity tracking. Persistent tracking biases can accumulate into position and heading deviations, increasing the risk of collisions and navigation failure. To address this problem, we present ReACT, a framework for accurate velocity tracking under asymmetric upper-body loads. Reflection-consistent disturbance modulation uses the estimated wrench to modulate actor features for load compensation while preserving action correspondence under reflected observations. Cross-load tracking consistency training compares loaded and unloaded conditions under the same velocity commands to promote consistent velocity tracking across loading conditions. Simulation experiments on a Unitree G1 humanoid robot show improved velocity tracking and reduced directional bias under varying asymmetric loads. Real-world experiments demonstrate collision-free goal reaching in all 40 tested navigation trials under unilateral hand loads with a fixed mapless navigation policy.

0.09

Driving the Style: Velocity-Conditioned Whole-Body Control from Motion Demonstrations

cs.RO ·2026-11-16 ·Murad Dawood, Oezge Drama Berkenkamp, Antonio Gonzales Marin, Nutan Chen
similarity 0.70
Abstract

Achieving human-like behavior on humanoid robots has advanced rapidly by leveraging motion-capture demonstrations rather than hand-crafted cost functions. Adversarial imitation supplies a style signal that lets a policy fulfill a task while adhering to a desired style, but is difficult to transfer to hardware. Whole-body tracking through reinforcement learning instead deploys reliably and imitates demonstrations faithfully, but the resulting policies are conditioned on the future reference, so they require a reference trajectory at runtime and can fail when the motion differs from the training data. We train a humanoid policy directly with whole-body tracking rewards while restricting its actor to compact locomotion commands and robot observations. Reference motion supervises the reward and privileged critic, without supplying reference joint trajectories to the actor or requiring teacher distillation. The demonstrated style is thereby encoded in the policy through the tracking reward, so the robot reproduces the whole-body style under commanded velocities. Trained on a single random-walk motion and commanded with velocity profiles from held-out motions, our policy reaches at least 98\% success in simulation and completes every trial on the Unitree G1. On held-out slow walking, whole-body tracking drops to 2\% success and command-conditioned distillation to 56\%, and both fail on the real robot. On the trained motions, the joint position error of our policy stays within 8\% of whole-body tracking, and it has a higher style coverage than adversarial motion priors (AMP), which fell on the real robot without a safety crane.

0.22

Dataset-Free Compliant Humanoid Loco-Manipulation with Dynamic Online Posture

cs.RO ·2026-10-05 ·Seungho Yeom, Zhenyu Wu, Jaeyoung Huh, Diego Williams, Yuheng Zhi +2 more
similarity 0.70
Abstract

Most humanoid loco-manipulation controllers require human motion data to learn whole-body coordination and posture, leaving policies reliant on external sources to provide this data. We present OCLO (Online-posture Compliant LOco-manipulation), a humanoid loco-manipulation system trained without human motion data and commanded only through two end-effector targets. Because these targets do not uniquely determine whole-body posture, OCLO generates pelvis height and torso orientation online using an analytic reachability prior, further refined through policy-in-the-loop sampling with a task-agnostic cost. OCLO also learns whole-body compliance by displacing end-effector references according to measured forces through a spring-damper model, encouraging the legs, waist, and pelvis to yield to external loads. In simulation, using the reachability prior leads to a 77.8% success rate in acquiring the commanded reference, a vast improvement over the 37.8% success rate accomplished without the prior. Further, refinement reduces end-effector orientation error across all evaluated tasks. The same posture module improves a pretrained SONIC controller on four of five tasks. Without compliance training, policies tend to lose balance under disturbances rather than sacrifice tracking. On a Unitree G1, OCLO maintains balance under end-effector disturbances that cause its ablations to fail and performs seven loco-manipulation tasks, including crouched walking and picking up a box from a low surface. Project website: https://oclo-humanoid.github.io/

0.27

DexWeave: Learning Dexterous Humanoid Loco-Manipulation from Human Demonstrations

cs.RO ·2026-09-28 ·Naichuan Sun, Haotian Shen, Yizhang Zhang, Luying Feng, Haoze Wang +3 more
code/data similarity 0.70
Abstract · 26 pages, 6 figures

Learning dexterous humanoid loco-manipulation from human demonstrations requires transferring not only human motion, but also the coordinated interaction structure underlying the demonstrated behavior. This is challenging because embodiment differences distort the coupling among body motion, wrist placement, finger articulation, and object interaction, while kinematically accurate references may still be difficult to realize under robot dynamics. We present DexWeave, a unified framework that connects interaction-consistent motion retargeting with anatomy-aware whole-body policy learning. DexWeave first employs a two-stage retargeting procedure that initializes body and hand motions with specialized solvers and subsequently performs coupled refinement over the upper-body interaction chain while preserving lower-body support. The resulting references are tracked by an anatomy-aware Transformer policy that represents anatomical regions as structured tokens and uses directed masked attention to model their dependencies, with object information selectively conditioning the upper-body pathway for dexterous interaction. The policy jointly outputs body and dexterous-hand actions and is trained directly with reinforcement learning, without pretrained tracking policies, teacher-student distillation, or subsequent residual refinement. DexWeave improves retargeting fidelity and interaction consistency while achieving higher manipulation performance and faster policy convergence than MLP baselines. We further deploy the learned policies on a physical Unitree G1 humanoid equipped with Inspire dexterous hands, demonstrating dexterous whole-body loco-manipulation in the real world. See our project page (https://dexweave.github.io) for videos.

0.50