CS Paper Radar

ReACT: Reflection-Consistent Modulation and Cross-Load Consistency for Humanoid Velocity Tracking Under Asymmetric Loads

Xianghui Wang, Aoran Fu, Liyou Luo, Shanze Wang, Xiaoyu Shen, Dan Zhang, Wei Zhang

cs.RO ·submitted 2026-11-10 11:18 UTC · v1

Abstract

In recent years, humanoid loco-manipulation has progressed to whole-body grasping, lifting, and transport. A basic requirement underlying these tasks is carrying the object to its destination, which depends on the locomotion controller accurately executing velocity commands from the navigation policy. However, carrying an object in one hand introduces a persistent asymmetric upper-body load that can degrade velocity tracking. Persistent tracking biases can accumulate into position and heading deviations, increasing the risk of collisions and navigation failure. To address this problem, we present ReACT, a framework for accurate velocity tracking under asymmetric upper-body loads. Reflection-consistent disturbance modulation uses the estimated wrench to modulate actor features for load compensation while preserving action correspondence under reflected observations. Cross-load tracking consistency training compares loaded and unloaded conditions under the same velocity commands to promote consistent velocity tracking across loading conditions. Simulation experiments on a Unitree G1 humanoid robot show improved velocity tracking and reduced directional bias under varying asymmetric loads. Real-world experiments demonstrate collision-free goal reaching in all 40 tested navigation trials under unilateral hand loads with a fixed mapless navigation policy.

Closest papers

Nearest neighbours by meaning across the whole index.

CompliantBot: Learning Whole-Body Compliance across Task Interfaces for Humanoid Control

cs.RO ·2026-11-01 ·Haoyang Li, Keqi Zhu, Zhanxiang Cao, Yang Zhang, Yizhi Chen +2 more
similarity 0.73
Abstract · 12 pages, 8 figures, 5 tables

Humanoid controllers need the ability to yield to external forces while retaining the capacity to resume their original tasks. However, tracking objectives penalize the deviations needed for yielding, while relaxing tracking goals persistently can make task recovery harder. Existing approaches often rely on task-specific interaction command interfaces or constructed compliant motion data and reference trajectories, limiting the direct reuse of their compliance-training mechanisms across different task interfaces. We introduce CompliantBot, a compliance-training framework for motion tracking and velocity-command locomotion. It preserves the original task inputs and requires no preconstructed compliant data or target trajectories. A state-dependent interaction force field couples applied loads to the robot's motion, enabling local articulation and whole-body movement to change the forces experienced. A complementary force-magnitude reward encourages lower interaction loads, while task rewards are downweighted during loading and restored after release to coordinate yielding and task resumption. The trained policies use task inputs and proprioceptive history without explicit external-force measurements. Across both task interfaces, CompliantBot yields farther under constant pulls and experiences lower spring interaction loads than matched baselines, while resuming task tracking after force removal. CompliantBot achieves the highest task completion among the compared methods under stronger pulls. Power evaluations further show that CompliantBot has the lowest mean joint mechanical power among the compared methods. Real-robot demonstrations further illustrate compliant responses through arm motion, stepping, and body reorientation.

0.23

Humanoid Rickshaw Pulling: Whole-Body Locomotion under Coupled Wheeled Loads

cs.RO cs.LG ·2026-10-03 ·Yangzhi Yang, Xiansheng Lin, Zhaoming Xie, Xiaobin Xiong
similarity 0.71
Abstract

Humanoid robots could transport payloads substantially heavier than themselves by pulling passive wheeled vehicles instead of carrying the load. This capability, however, creates a coupled locomotion problem: the robot must maintain persistent upper-body contact while adapting to unknown, configuration-dependent forces arising from the payload, vehicle, and terrain. We present a whole-body control framework for humanoid rickshaw pulling that tracks commanded vehicle motion while preserving balance and stable grasps under uncertain load dynamics. During training, a privileged teacher exploits vehicle states, interaction forces, and load properties. Its actions and latent are distilled into a history-conditioned student that implicitly infers coupled dynamics from proprioceptive responses, followed by reinforcement-learning fine-tuning. Comparisons with \emph{No History} and \emph{Only History} baselines show that the resulting policy achieves accurate vehicle tracking while reducing vehicle oscillation, torso tilt, and actuation cost. Behavioral analysis shows that Unitree G1 propels the rickshaw and generates gait-synchronized whole-body reactions that stabilize its lateral and roll motions. Moreover, pulling redistributes joint effort and yields a lower robot-normalized cost-of-transport proxy than unloaded walking over most tested load--speed conditions. On hardware, a single policy performs starting, sustained pulling, turning, and stopping with both rigid payloads and human passengers, handling a loaded rickshaw mass of up to 115~kg without load-specific retuning. These results demonstrate robust heavy-load transportation through coordinated and persistent humanoid--vehicle interaction.

0.21

Anchor 1: Precise and Stable Humanoid Control for Whole-Body Manipulation

cs.RO ·2026-10-30 ·Archon Robotics, :, Caojun Wang, Checheng Yu, Gangcheng Jiang +22 more
benchmark similarity 0.71
Abstract

Humanoid controllers have acquired increasingly diverse motor skills, yet translating these capabilities into precise and stable whole-body manipulation remains challenging. Manipulation tasks are sensitive to execution deviations -- even small errors or unintended steps can cause failure. Introducing Anchor 1, a whole-body controller for precise and stable whole-body manipulation, together with a benchmark spanning diverse coordination demands. Anchor 1 adopts calibrated sparse motion references to preserve task-relevant human motion structure without online joint-space retargeting, leaving kinematic freedom for precise control. To guide this freedom towards stable, physically plausible whole-body coordination, we shape the training distribution through offline curation of robot motions paired with these calibrated sparse references. We further introduce explicit error feedback decoupled from motion encoding, improving control precision while supporting flexible command interfaces. To achieve a systematic evaluation of these capabilities, a benchmark is proposed to assess precision, sustained execution stability, and reachability across diverse whole-body coordination demands. Evaluations in simulation and on hardware show stronger precision and stability across all evaluation tracks. Under the most strict real-world global scoring setting, Anchor 1 achieves a 30\% to 80\% decrease in tracking error with fewer look-ahead inputs, and without retargeting compared to all existing controllers. Downstream experiments demonstrate more efficient teleoperated data collection and higher task success using the same deployment pipeline as well. We believe Anchor 1 supports precise and stable whole-body control as a practical basis for humanoid task execution.

0.18

FORGE: Force-Aware Multi-Granularity Control for Efficient Humanoid Loco-Manipulation

cs.RO ·2026-11-12 ·Liangjun Xing, Ke Fan, Kailin Li, Bin Wang, Xiaojie Niu +6 more
similarity 0.70
Abstract · 8 pages, 10 figures

Humanoid loco-manipulation requires coordinated locomotion, balance regulation, and manipulation under frequent contacts, making teleoperated demonstration collection difficult: a practical controller must simultaneously provide precision, stability, and contact awareness. We propose FORGE, a force-aware multi-granularity control system with a coarse-to-fine command space spanning velocity navigation, planar foot placement, wrist-pose tracking, and optional force-conditioning inputs. Policy training requires no full-body human motion trajectories or joint-angle references; deployment consumes only sparse bilateral wrist poses relative to the pelvis, coarse motion commands, and optional desired wrist-load inputs. For sustained contact, FORGE combines a momentum observer with a learned correction trained using simulator contact-force supervision. At deployment, it estimates low-frequency, wrist-equivalent interaction forces from proprioception and reconstructed low-level arm PD torques, without wrist force/torque sensors. A quasi-static virtual-target loop uses this estimate and an optional desired applied-force input to adapt the wrist target. A frozen locomotion prior and asymmetric residual actions stabilize manipulation-induced whole-body corrections. Experiments evaluate unified-control stability, task-space tracking, quasi-static wrist-equivalent force estimation, squeezing forces during sustained contact with a rigid box, and downstream diffusion-policy execution of a squat-and-lift task across payload conditions. Website: https://bb0928.github.io/forge/.

0.15

HULK: Learning Whole-Body Forceful Loco-Manipulation for Humanoids

cs.RO cs.LG ·2026-10-06 ·An Dang, Arturo Flores Alvarez, Yu-Ming Chen, Conor Mc Gartoll, Helen Sun +3 more
similarity 0.70
Abstract · 16 pages, 7 figures, IEEE International Conference on Robotics and Automation 2027

Humanoid loco-manipulation of large, heavy objects demands forceful interaction across the entire body. However, such payloads shift a humanoid's center of mass and impose sustained loads across the upper body, challenging balance and command tracking. We present HULK, a whole-body control framework for forceful loco-manipulation. Using model predictive control (MPC) to guide reinforcement learning with predictions of the loaded dynamics, we train two teachers: one tracks arm motions under wrist forces, and the other locomotes while holding large objects against the body. A capture-point control barrier function augments the wrist-force teacher during training to improve balance under load. We distill both teachers into a single policy. Evaluation spans simulation and the Unitree G1. In simulation, the teacher with the barrier function achieves the lowest forward and lateral velocity tracking errors at 10 kg per arm among evaluated controllers and reduces aggregate divergent component of motion (DCM) excursion magnitude by 35.7% relative to MPC-guided reinforcement learning alone. Our wrist-force teacher withstands torso push disturbances of up to 130 N.

0.24

Gated Residual Body-Hand Coordination for Whole-Body Humanoid Teleoperation

cs.RO ·2026-09-16 ·Ruiming Wu, Shuang Li, Liding Zhang, Alois Knoll, Zhaopeng Chen
similarity 0.70
Abstract

Whole-body humanoid teleoperation commonly combines a motion-tracking policy with a separate dexterous-hand retargeter. However, independently generated commands do not explicitly preserve body-hand geometric relations, leading to mismatches in relative wrist poses and fingertip positions during bimanual interaction. We present a gated residual coordination framework that keeps both modules frozen and applies bounded corrections to their outputs. A motion-conditioned action gate allocates correction authority across joint groups, while reference-geometry-dependent reward gates emphasize relevant interaction objectives during training. To establish the nominal body controller on Agile One, we introduce multi-pose morphology calibration that jointly estimates triaxial scales and effector-local offsets, together with staged motion dataset curation for training a SONIC-based tracker. The residual policy uses human motion references, initial commands, and robot proprioception without explicit object or contact observations. In simulation, it reduces wrist and fingertip geometry errors by 39.2-56.3% over direct composition on held-out GRAB motions, while preserving whole-body tracking on AMASS, with success rates of 89.03% without residual coordination and 89.29% with it. Ablations characterize the contributions of reward gating, adaptive correction authority, and separate body and hand correction heads.

0.43

BRACE: Adapting Whole-Body References for Force and Terrain Aware Humanoid Motion Tracking

cs.RO ·2026-10-05 ·Sudarshan Harithas, Chen Yu, Juan Borbon, Shubhankar Mondal, Winston Zha +3 more
hot direction similarity 0.70
Abstract

Whole-body tracking has become the interface through which operators drive humanoid robots, yet the references it consumes are recorded on level ground and carrying nothing, so the tracker is aware of neither the forces the robot must exchange with objects nor the terrain it must stand on. Existing controllers address one side of this gap: force-capable policies command an end-effector force but prescribe no whole-body pose, while terrain-adaptive trackers treat loads as disturbances to reject rather than wrenches to command. We present BRACE, a whole-body tracker that exerts and compensates commanded hand forces from diverse poses while following a flat-ground reference on sloped terrain. Rather than leaving the tracker to absorb the load and the slope, BRACE folds both into the reference it follows: terrain conformance lifts footholds and root onto the local surface, and a wrench transformation resolves the hand displacement that produces a force jointly with the center-of-mass and center- of-pressure shifts it induces, bounded by teacher-specific arm-effort limits. Separate exertion and compensation teachers are distilled by DAgger into one flow-matching student that runs on proprioception alone, without a height map or measured wrench, so a teleoperator (even in remote locations) can supply a flat- ground trajectory and the robot resolves slope and load onboard. We extensive experiments on the Unitree-G1 to demonstrate the ability of BRACE to exert, compensate force and handle diverse terrain in simulation and real robot experiments.

0.28

OneSteer: Unlocking Steerable General Humanoid Motion Tracking via One-Step Diffusion Whole-Body Control

cs.RO ·2026-10-30 ·Yifei Huang, Yazhao Yang, Weijia Li, Zhiheng Ma, Dian Shen
similarity 0.69
Abstract

Deployment objectives often specify desired outcomes without providing revised trajectories, while parts of the original reference must still be followed. We present OneSteer, a one-step diffusion whole-body controller that combines general motion tracking with selective test-time steering. To accommodate new objectives, differentiable task costs guide optimization of the generator's input noise with frozen weights, while body-group reference masks relax selected tracking requirements. Predicted state-action plans provide a shared interface for task optimization and feedback-conditioned execution. For nominal tracking, the model trained from scratch achieves the lowest local tracking error among the evaluated baselines on successful held-out AMASS and BONES clips. For steering, one frozen distilled controller adapts across diverse deployment objectives in simulation, raising the clean passage rate under a 1.25 m bar from 2% to 90%. On a physical Unitree G1, OneSteer completes all 27 nominal tracking trials across nine diverse whole-body motion sequences without falling. With a steering cost derived from a signed distance field built using only onboard LiDAR, it also passes under a 1.1 m low bar in four of five attempts and steps over a 12 cm hurdle without falling in all three attempts. Beyond control, prediction variation in the model trained from scratch ranks likely tracking failures without physics rollouts. This scoring method is more than 10x faster than simulation-based scoring with five rollouts per clip and guides targeted fine-tuning.

0.12