CS Paper Radar

BRACE: Adapting Whole-Body References for Force and Terrain Aware Humanoid Motion Tracking

Sudarshan Harithas, Chen Yu, Juan Borbon, Shubhankar Mondal, Winston Zha, Srinath Sridhar, Dingqi Zhang, Jiuguang Wang

cs.RO ·submitted 2026-10-05 03:18 UTC · v1
hot direction

Abstract

Whole-body tracking has become the interface through which operators drive humanoid robots, yet the references it consumes are recorded on level ground and carrying nothing, so the tracker is aware of neither the forces the robot must exchange with objects nor the terrain it must stand on. Existing controllers address one side of this gap: force-capable policies command an end-effector force but prescribe no whole-body pose, while terrain-adaptive trackers treat loads as disturbances to reject rather than wrenches to command. We present BRACE, a whole-body tracker that exerts and compensates commanded hand forces from diverse poses while following a flat-ground reference on sloped terrain. Rather than leaving the tracker to absorb the load and the slope, BRACE folds both into the reference it follows: terrain conformance lifts footholds and root onto the local surface, and a wrench transformation resolves the hand displacement that produces a force jointly with the center-of-mass and center- of-pressure shifts it induces, bounded by teacher-specific arm-effort limits. Separate exertion and compensation teachers are distilled by DAgger into one flow-matching student that runs on proprioception alone, without a height map or measured wrench, so a teleoperator (even in remote locations) can supply a flat- ground trajectory and the robot resolves slope and load onboard. We extensive experiments on the Unitree-G1 to demonstrate the ability of BRACE to exert, compensate force and handle diverse terrain in simulation and real robot experiments.

Closest papers

Nearest neighbours by meaning across the whole index.

Brace Yourself: Task-Conditioned Environmental Bracing for Forceful Humanoid Manipulation

cs.RO ·2026-09-21 ·Zongyuan Zhang, Christopher Lehnert, Will N. Browne, Jonathan M. Roberts
similarity 0.72
Abstract · Submitted to IEEE Robotics and Automation Letters (RA-L). 8 pages, 6 figures. Video demonstration: https://youtu.be/zPrGLxWJzI4. This work h…

Forceful manipulation is challenging for humanoid robots because interaction forces can disturb whole-body balance. We introduce the Supporting Hand Strategy (SHS), which enables a humanoid to brace against the environment with one hand while performing forceful manipulation with the other. SHS optimises a task-conditioned support configuration that guides two synchronous reinforcement-learning policies, without human motion data or online whole-body trajectory planning. On a Unitree G1, SHS achieved usable contact forces up to 60 N, compared with a maximum sustained force of 13.5 N without environmental bracing, while substantially improving force tracking over a task-independent support configuration. The same policies generalised to different task regions without retraining. SHS therefore provides a simple mechanism for substantially extending humanoid forceful-manipulation capability.

0.37

LAC: Linear and Angular Compliance for Humanoid Whole-body Control

cs.RO ·2026-08-26 ·Yang Liu, Zhongkai Gu, Wei Zhu, Mitsuhiro Hayashibe
similarity 0.72
Abstract

Real-world humanoid tasks involve physical interaction with objects and humans, yet current controllers either reject external forces as disturbances or restrict compliance to limited body links while ignoring angular effects. We present LAC, a general whole-body controller that simultaneously realizes commanded Linear and Angular Compliance for wrenches applied to the upper body. First, we synthesize whole-body compliant responses into a large-scale augmented dataset. Sampled force and couple events are imposed on contact frames extracted from human interaction data. At each contact link, the external force and a virtual torque from the passively yielding kinematic chain drive a virtual admittance under the commanded stiffness. Subsequently, teacher-student reinforcement learning trains a single policy to track the compliant motions under external wrenches. Finally, extensive simulation and real-world experiments demonstrate whole-body compliant responses to wrenches across the upper body, monotonic modulation over the full range of both stiffness commands, and applicability to teleoperated loco-manipulation tasks. Project website: https://lac-humanoid.github.io/

0.36

Dataset-Free Compliant Humanoid Loco-Manipulation with Dynamic Online Posture

cs.RO ·2026-10-05 ·Seungho Yeom, Zhenyu Wu, Jaeyoung Huh, Diego Williams, Yuheng Zhi +2 more
similarity 0.71
Abstract

Most humanoid loco-manipulation controllers require human motion data to learn whole-body coordination and posture, leaving policies reliant on external sources to provide this data. We present OCLO (Online-posture Compliant LOco-manipulation), a humanoid loco-manipulation system trained without human motion data and commanded only through two end-effector targets. Because these targets do not uniquely determine whole-body posture, OCLO generates pelvis height and torso orientation online using an analytic reachability prior, further refined through policy-in-the-loop sampling with a task-agnostic cost. OCLO also learns whole-body compliance by displacing end-effector references according to measured forces through a spring-damper model, encouraging the legs, waist, and pelvis to yield to external loads. In simulation, using the reachability prior leads to a 77.8% success rate in acquiring the commanded reference, a vast improvement over the 37.8% success rate accomplished without the prior. Further, refinement reduces end-effector orientation error across all evaluated tasks. The same posture module improves a pretrained SONIC controller on four of five tasks. Without compliance training, policies tend to lose balance under disturbances rather than sacrifice tracking. On a Unitree G1, OCLO maintains balance under end-effector disturbances that cause its ablations to fail and performs seven loco-manipulation tasks, including crouched walking and picking up a box from a low surface. Project website: https://oclo-humanoid.github.io/

0.27

HLO-AMP: Hierarchical Loco-Manipulation from Object-Aware Motion Priors

cs.RO ·2026-11-03 ·Jean-Pierre Sleiman, Bilal Hammoud, He Li, Jonathan Foster, Sylvain Bertrand +2 more
published similarity 0.71
Abstract · Accepted at the Conference on Robot Learning (CoRL 2026). Video: https://youtu.be/viR_ULnRDQQ

Hierarchical pipelines for humanoid loco-manipulation typically pair a task-agnostic whole-body controller (WBC) with a downstream task policy. Such WBCs are often trained through manual reward shaping, which yields visibly machine-like motions; more consequentially, they are trained without the manipulated object in the scene. Object dynamics are instead approximated through randomized end-effector force disturbances, a proxy that fails to reproduce the distributed multi-contact wrench a real payload applies across the arms and torso, with the gap becoming critical near the platform's payload limit. In this work, we train the low-level (LL) controller itself as an object-aware motion prior: a single policy trained via motion imitation on retargeted motion-capture (MoCap) references that span the core motion primitives of the downstream task, with the manipulated object physically present in the scene. This single stage inherits natural human-like coordination from the references and absorbs the realistic contact wrench at its source, while exposing the same compact task-space command interface used by command-tracking WBCs. A reference-free high-level (HL) policy is then trained on top, with its action channel anchored to the empirical envelope of the low-level training data so that it generalizes the priors to a long-horizon multi-stage task while structurally preventing queries that would push the low level off-distribution. We instantiate the framework on a Unitree G1 for bimanual box pick-and-place: the same deployed policy generalizes across object masses and dimensions, initial and goal poses, and reactively recovers from intentional drops mid-carry. Video: https://youtu.be/viR_ULnRDQQ.

0.34

Ctrl-F: Force as an Interface for Humanoid Loco-Manipulation

cs.RO cs.LG ·2026-11-03 ·Mengjie Zhao, Yuxin Chen, Yiyang Shao, Chuye Hong, Jiakang Chen +2 more
positioncode/data similarity 0.70
Abstract · Project page: https://forcectrl.github.io/

Humanoid motion tracking has scaled to general policies that reproduce diverse human motion, but the resulting behavior is in free-space: the tracker knows where the body should be, not how it should interact with the environment. Other work makes the object part of the objective, yet abstracts that interaction to contact or geometry, which leaves the demanding cases under-explored. We argue that force is a natural command channel between motion imitation and object interaction, one that specifies not just where to make contact but how hard. We present Ctrl-F, a hierarchical motion-force framework that augments motion tracking with an explicit force command, a 3-D force at each designated contact body such as a hand or a foot. The hierarchical framework comprises: (1) A unified motion-force controller tracks the reference motion while applying the commanded force to the world. (2) A high-level force planner that issues a force command online based on object state and proprioception observations. In simulation and on hardware, Ctrl-F completes loco-manipulation that demands large, sustained interaction force and adjusts its command online as the load changes, both out of reach of a force-blind tracker. On hardware, Ctrl-F demonstrates hand-based dragging, pushing, and lifting, as well as foot-based kicking, successfully manipulating boxes weighing up to 20kg in pushing and kicking tasks where the force-blind baseline fails, while adapting online to additional loads introduced mid-task.

0.20

CompliantBot: Learning Whole-Body Compliance across Task Interfaces for Humanoid Control

cs.RO ·2026-11-01 ·Haoyang Li, Keqi Zhu, Zhanxiang Cao, Yang Zhang, Yizhi Chen +2 more
similarity 0.70
Abstract · 12 pages, 8 figures, 5 tables

Humanoid controllers need the ability to yield to external forces while retaining the capacity to resume their original tasks. However, tracking objectives penalize the deviations needed for yielding, while relaxing tracking goals persistently can make task recovery harder. Existing approaches often rely on task-specific interaction command interfaces or constructed compliant motion data and reference trajectories, limiting the direct reuse of their compliance-training mechanisms across different task interfaces. We introduce CompliantBot, a compliance-training framework for motion tracking and velocity-command locomotion. It preserves the original task inputs and requires no preconstructed compliant data or target trajectories. A state-dependent interaction force field couples applied loads to the robot's motion, enabling local articulation and whole-body movement to change the forces experienced. A complementary force-magnitude reward encourages lower interaction loads, while task rewards are downweighted during loading and restored after release to coordinate yielding and task resumption. The trained policies use task inputs and proprioceptive history without explicit external-force measurements. Across both task interfaces, CompliantBot yields farther under constant pulls and experiences lower spring interaction loads than matched baselines, while resuming task tracking after force removal. CompliantBot achieves the highest task completion among the compared methods under stronger pulls. Power evaluations further show that CompliantBot has the lowest mean joint mechanical power among the compared methods. Real-robot demonstrations further illustrate compliant responses through arm motion, stepping, and body reorientation.

0.23

ReACT: Reflection-Consistent Modulation and Cross-Load Consistency for Humanoid Velocity Tracking Under Asymmetric Loads

cs.RO ·2026-11-10 ·Xianghui Wang, Aoran Fu, Liyou Luo, Shanze Wang, Xiaoyu Shen +2 more
similarity 0.70
Abstract

In recent years, humanoid loco-manipulation has progressed to whole-body grasping, lifting, and transport. A basic requirement underlying these tasks is carrying the object to its destination, which depends on the locomotion controller accurately executing velocity commands from the navigation policy. However, carrying an object in one hand introduces a persistent asymmetric upper-body load that can degrade velocity tracking. Persistent tracking biases can accumulate into position and heading deviations, increasing the risk of collisions and navigation failure. To address this problem, we present ReACT, a framework for accurate velocity tracking under asymmetric upper-body loads. Reflection-consistent disturbance modulation uses the estimated wrench to modulate actor features for load compensation while preserving action correspondence under reflected observations. Cross-load tracking consistency training compares loaded and unloaded conditions under the same velocity commands to promote consistent velocity tracking across loading conditions. Simulation experiments on a Unitree G1 humanoid robot show improved velocity tracking and reduced directional bias under varying asymmetric loads. Real-world experiments demonstrate collision-free goal reaching in all 40 tested navigation trials under unilateral hand loads with a fixed mapless navigation policy.

0.09

DKWBC: Decoupling Motion Tracking and Balancing for Humanoid Whole-Body Control

cs.RO ·2026-11-06 ·Dingkun Wei, Zehong Shen, Huaijin Pi, Xueyang Wang, Xing Zhu +3 more
code/data similarity 0.69
Abstract · 9 pages, 6 figures, 4 tables

Humanoid whole-body control requires a robot to track diverse reference motions while maintaining balance under gravity, torque limits, contact switching, and external disturbances. Existing reinforcement-learning-based trackers typically learn control outputs that jointly address motion tracking and balance. However, similar reference poses can correspond to substantially different dynamic demands, requiring a unified policy to learn motion-dependent control requirements alongside balance corrections. This can complicate learning and lead to high-frequency fluctuations in control outputs. We propose DKWBC, a dynamics-informed whole-body control framework that combines explicit model-based tracking with a learned balancing residual. Inspired by the model-based and environmental-wrench contributions to joint torques in floating-base dynamics, DKWBC uses inverse-dynamics feedforward and joint PD feedback to supply tracking torques, while a residual policy learns additional joint-torque corrections for balanced execution. By explicitly accounting for motion-dependent torque demands, this structure simplifies the policy's learning task. Experiments in simulation and on real hardware demonstrate that a single learned balancing policy generalizes across motion datasets while maintaining accurate motion tracking and balance across ground support, attached payloads, and physical interaction. Project page: https://robbyant-research.github.io/DKWBC/.

0.24