CS Paper Radar

Ctrl-F: Force as an Interface for Humanoid Loco-Manipulation

Mengjie Zhao, Yuxin Chen, Yiyang Shao, Chuye Hong, Jiakang Chen, Koushil Sreenath, Masayoshi Tomizuka

cs.RO cs.LG ·submitted 2026-11-03 19:04 UTC · v1
positioncode/data

Abstract

Humanoid motion tracking has scaled to general policies that reproduce diverse human motion, but the resulting behavior is in free-space: the tracker knows where the body should be, not how it should interact with the environment. Other work makes the object part of the objective, yet abstracts that interaction to contact or geometry, which leaves the demanding cases under-explored. We argue that force is a natural command channel between motion imitation and object interaction, one that specifies not just where to make contact but how hard. We present Ctrl-F, a hierarchical motion-force framework that augments motion tracking with an explicit force command, a 3-D force at each designated contact body such as a hand or a foot. The hierarchical framework comprises: (1) A unified motion-force controller tracks the reference motion while applying the commanded force to the world. (2) A high-level force planner that issues a force command online based on object state and proprioception observations. In simulation and on hardware, Ctrl-F completes loco-manipulation that demands large, sustained interaction force and adjusts its command online as the load changes, both out of reach of a force-blind tracker. On hardware, Ctrl-F demonstrates hand-based dragging, pushing, and lifting, as well as foot-based kicking, successfully manipulating boxes weighing up to 20kg in pushing and kicking tasks where the force-blind baseline fails, while adapting online to additional loads introduced mid-task.

Comment
Project page: https://forcectrl.github.io/

Closest papers

Nearest neighbours by meaning across the whole index.

CARD: Contact-Anchored Retargeting for Dexterous Manipulation

cs.RO ·2026-10-27 ·Cunxi Dai, Botao He, Francois R Hogan, Wei Pan, Rao Fu +5 more
similarity 0.77
Abstract · Project webpage: https://card-retargeting.github.io/

Humans are dexterous, but traditional data collection paradigms such as teleoperation, kinesthetic teaching, and wearable exoskeletons force humans to act through the robot embodiment, bottlenecking their dexterity. Retargeting can avoid this. However, existing methods purely translate kinematics and ignore the real-world contact dynamics essential for task success. We present CARD: Contact-Anchored Retargeting for Dexterous Manipulation, a simulator and object-free framework that retargets human demonstrations to robot actions by explicitly preserving contact force targets. CARD unifies human data sources including video, motion capture, and tactile gloves via a shared hand--contact representation and generates explicit contact force targets in addition to kinematics. To maintain these contact targets during hardware open-loop replay, CARD also introduces a tactile tracking controller. For video which does not contain an explicit tactile source, we present Vid-HACO, our video-to-contact model that sets a new state of the art. Across our video, glove, motion-capture data and the GRAB dataset, CARD maintains contact on $43$--$78\%$ of contact frames, while kinematic and object-aware retargeting methods maintain contact on $<10\%$ and $22.5\%$ of the frames respectively. Further, integrating our formulation into physics-based retargeting improves strict task success from 12\% to 32\% on GRAB dataset. Finally, we show that our tactile tracker is critical to reproduce demonstrated forces during hardware replay. These results establish that contact preservation via CARD is a scalable interface for transferring human dexterity to robots.

0.39

KPI: A Promptable Kernel for Physical Interaction on Humanoids

cs.RO ·2026-09-28 ·Yikai Wang, Honghao Zhu, Xiao Hu, Hao Zhang, Zelin Wang +3 more
similarity 0.76
Abstract · Project website: https://kpi-robot.github.io/

Humanoids now walk, balance and reach with remarkable generality: one whole-body tracking policy follows references from a human, or from an end-to-end policy. That generality travels in the trajectory, and a trajectory alone carries limited information about the interaction it should produce: at contact, the executing controller determines how the robot behaves. Single-task policies usually reach hard interactions by optimising trajectory and controller together in simulation; general stacks usually assume a preset or hand-chosen controller. We present KPI, a promptable kernel for physical interaction between the trajectory source and an unmodified whole-body tracker. Instead of a controller fixed before the task, the trajectory source sends a contract: per direction, track, comply, or hold a force range. From tracking error and a wrench estimate, the kernel adapts the arms' stiffness, damping, reference and feedforward toward it at contact rate. We demonstrate KPI through an agentic framework: from one instruction, a vision-language agent writes both the reference trajectory and the contract, with no task-specific code. We demonstrate instruction-driven winch operation, door opening, and box transport, alongside scripted surface-interaction experiments. In the winch demonstration, the humanoid is able to turn a crank to hoist a second robot fully off the ground.

0.26

Learning Force-Reactive Humanoid Loco-Manipulation

cs.RO cs.AIcs.LGeess.SY ·2026-10-26 ·Sihang Li, Xiaofeng Guo, Jinkun Cao, Charlie Cheng, Ruihan Yang +3 more
highly cited similarity 0.76
Abstract · 9 pages, 6 figures

Many everyday tasks require controlling contact force as well as motion. On a humanoid, this force must often be coordinated across both hands and the whole body, and cannot be specified by kinematic trajectories alone. Therefore, we present FLORE, a framework for learning force-reactive humanoid loco-manipulation. We collect robot-free demonstrations using two force-sensing UMI-style handheld grippers for hand motion and contact wrenches, and wearable trackers for body motion. A force-reactive diffusion policy takes vision, proprioception, and measured wrenches as input, then predicts actions and per-hand force commands. A hybrid compliance whole-body controller with force tracking executes these commands while maintaining balance: an integral of the force error measured by real force/torque (F/T) sensors lets each hand track force accurately along the commanded direction and remain compliant along the others. In simulation, the controller tracks per-hand force commands of varied magnitude and direction, with little loss in whole-body motion accuracy. Across three contact-rich tasks on the robot, the force-reactive policy succeeds in 80% of rollouts, compared with 26.7% for a position-only policy trained on the same demonstrations and executed by the same controller. For more details, please visit our website: https://louis-leee.github.io/FLoRe/.

0.49

FORGE: Force-Aware Multi-Granularity Control for Efficient Humanoid Loco-Manipulation

cs.RO ·2026-11-12 ·Liangjun Xing, Ke Fan, Kailin Li, Bin Wang, Xiaojie Niu +6 more
similarity 0.75
Abstract · 8 pages, 10 figures

Humanoid loco-manipulation requires coordinated locomotion, balance regulation, and manipulation under frequent contacts, making teleoperated demonstration collection difficult: a practical controller must simultaneously provide precision, stability, and contact awareness. We propose FORGE, a force-aware multi-granularity control system with a coarse-to-fine command space spanning velocity navigation, planar foot placement, wrist-pose tracking, and optional force-conditioning inputs. Policy training requires no full-body human motion trajectories or joint-angle references; deployment consumes only sparse bilateral wrist poses relative to the pelvis, coarse motion commands, and optional desired wrist-load inputs. For sustained contact, FORGE combines a momentum observer with a learned correction trained using simulator contact-force supervision. At deployment, it estimates low-frequency, wrist-equivalent interaction forces from proprioception and reconstructed low-level arm PD torques, without wrist force/torque sensors. A quasi-static virtual-target loop uses this estimate and an optional desired applied-force input to adapt the wrist target. A frozen locomotion prior and asymmetric residual actions stabilize manipulation-induced whole-body corrections. Experiments evaluate unified-control stability, task-space tracking, quasi-static wrist-equivalent force estimation, squeezing forces during sustained contact with a rigid box, and downstream diffusion-policy execution of a squat-and-lift task across payload conditions. Website: https://bb0928.github.io/forge/.

0.15

HLO-AMP: Hierarchical Loco-Manipulation from Object-Aware Motion Priors

cs.RO ·2026-11-03 ·Jean-Pierre Sleiman, Bilal Hammoud, He Li, Jonathan Foster, Sylvain Bertrand +2 more
published similarity 0.75
Abstract · Accepted at the Conference on Robot Learning (CoRL 2026). Video: https://youtu.be/viR_ULnRDQQ

Hierarchical pipelines for humanoid loco-manipulation typically pair a task-agnostic whole-body controller (WBC) with a downstream task policy. Such WBCs are often trained through manual reward shaping, which yields visibly machine-like motions; more consequentially, they are trained without the manipulated object in the scene. Object dynamics are instead approximated through randomized end-effector force disturbances, a proxy that fails to reproduce the distributed multi-contact wrench a real payload applies across the arms and torso, with the gap becoming critical near the platform's payload limit. In this work, we train the low-level (LL) controller itself as an object-aware motion prior: a single policy trained via motion imitation on retargeted motion-capture (MoCap) references that span the core motion primitives of the downstream task, with the manipulated object physically present in the scene. This single stage inherits natural human-like coordination from the references and absorbs the realistic contact wrench at its source, while exposing the same compact task-space command interface used by command-tracking WBCs. A reference-free high-level (HL) policy is then trained on top, with its action channel anchored to the empirical envelope of the low-level training data so that it generalizes the priors to a long-horizon multi-stage task while structurally preventing queries that would push the low level off-distribution. We instantiate the framework on a Unitree G1 for bimanual box pick-and-place: the same deployed policy generalizes across object masses and dimensions, initial and goal poses, and reactively recovers from intentional drops mid-carry. Video: https://youtu.be/viR_ULnRDQQ.

0.34

ReForce: Learning Force-aware Retargeting for Dexterous Manipulation

cs.RO ·2026-08-16 ·Yuhang Wu, Lingqi Zeng, Changwei Jing, Jianglong Ye, Xiaolong Wang
similarity 0.75
Abstract

Human demonstrations offer a scalable data source for dexterous manipulation, but transferring them to robot actions remains challenging due to the embodiment gap. Today's retargeting is mostly kinematic, yet manipulation is decided by force, which governs how the hand interacts with the object and how the object moves. In this paper, we present ReForce, a Force-aware Retargeting method that turns human motion and forces into robot actions that reproduce the intended contact. ReForce predicts a residual on the kinematically retargeted action to reach the desired force, using a general force tracker trained on large-scale simulation interactions. It supports both online force-aware teleoperation and offline data translation. In simulation and on real hardware, ReForce achieves lower force-tracking error and stronger multi-finger contact engagement on contact-rich tasks such as paper-cup grasping and tongs manipulation.

0.41

Contact Imitation Interface: Transferring Dexterous Skills by Showing How Contact Unfolds

cs.RO ·2026-10-29 ·Zhixuan Xu, Yichen Li, Bingchen Wu, Rui Wang, Yiwen Hou +3 more
similarity 0.74
Abstract · 15 pages (8-page main paper and 7-page supplementary material). Project website with code and hardware designs: https://nus-lins-lab.github.…

Robot-free human demonstrations offer a promising route to scaling dexterous manipulation data. The key challenge is to preserve the demonstrator's natural dexterity while producing contact-grounded observations and actions that transfer to robot hands. We present Contact Imitation Interface (CIMI), a framework with contact-grounded demonstration and learning interfaces. The demonstration interface combines shared contact geometry and fingertip RGB views with contact-alignment-first retargeting and reprojection of wider scene views. The learning interface introduces a hierarchical policy in which a contact-surface planner predicts relative contact-surface trajectories and a controller coordinates wrist and finger commands to improve contact alignment. CIMI combines contact-grounded observations, retargeting, and action representations, improving mean final-stage success by at least 50 percentage points over baseline policies across six hand-task pairs on LEAP and Wuji. Hardware designs and software are publicly available.

0.21

Opt2VLA: Force-Aware Vision-Language-Action for Contact-Rich Humanoid Whole-Body Manipulation

cs.RO ·2026-09-21 ·Fukang Liu, Yipu Chen, Jaehwi Jang, Danfei Xu, Zsolt Kira +1 more
similarity 0.74
Abstract

Humanoid robots are expected to perform diverse human-level tasks in daily environments, many of which require precise regulation of interaction forces. While recent vision-language-action (VLA) models have shown promise for semantic planning and visuomotor control, existing humanoid systems primarily represent actions through geometric motion goals and rely on whole-body controllers focused on motion tracking, with limited explicit reasoning or control of interaction forces. This limitation is particularly relevant in contact-rich tasks, where geometrically similar motions may require different force regimes depending on the task context and where visual observations may become unreliable after contact. In this work, we present Opt2VLA, a force-aware VLA framework that introduces explicit force commands at the VLA-to-control interface for humanoid whole-body manipulation. A single multi-task VLA policy jointly predicts both geometric motion goals and continuous contact-force references, which are tracked by task-specific reinforcement learning (RL)-based whole-body controllers. To provide scalable and physically grounded supervision, we generate dynamically feasible and contact-consistent training data via whole-body trajectory optimization (TO) with explicit force references. We evaluate Opt2VLA on three contact-rich humanoid tasks and show that explicit force conditioning enables more accurate and consistent force regulation than motion-only control, while physically grounded torque supervision from TO further improves force tracking accuracy and stability. Closed-loop evaluations further demonstrate language-conditioned force modulation with Opt2VLA in simulation and on humanoid hardware.

0.38