CS Paper Radar

LAC: Linear and Angular Compliance for Humanoid Whole-body Control

Yang Liu, Zhongkai Gu, Wei Zhu, Mitsuhiro Hayashibe

cs.RO ·submitted 2026-08-26 06:07 UTC · v1

Abstract

Real-world humanoid tasks involve physical interaction with objects and humans, yet current controllers either reject external forces as disturbances or restrict compliance to limited body links while ignoring angular effects. We present LAC, a general whole-body controller that simultaneously realizes commanded Linear and Angular Compliance for wrenches applied to the upper body. First, we synthesize whole-body compliant responses into a large-scale augmented dataset. Sampled force and couple events are imposed on contact frames extracted from human interaction data. At each contact link, the external force and a virtual torque from the passively yielding kinematic chain drive a virtual admittance under the commanded stiffness. Subsequently, teacher-student reinforcement learning trains a single policy to track the compliant motions under external wrenches. Finally, extensive simulation and real-world experiments demonstrate whole-body compliant responses to wrenches across the upper body, monotonic modulation over the full range of both stiffness commands, and applicability to teleoperated loco-manipulation tasks. Project website: https://lac-humanoid.github.io/

Closest papers

Nearest neighbours by meaning across the whole index.

Learning Force-Reactive Humanoid Loco-Manipulation

cs.RO cs.AIcs.LGeess.SY ·2026-10-26 ·Sihang Li, Xiaofeng Guo, Jinkun Cao, Charlie Cheng, Ruihan Yang +3 more
highly cited similarity 0.76
Abstract · 9 pages, 6 figures

Many everyday tasks require controlling contact force as well as motion. On a humanoid, this force must often be coordinated across both hands and the whole body, and cannot be specified by kinematic trajectories alone. Therefore, we present FLORE, a framework for learning force-reactive humanoid loco-manipulation. We collect robot-free demonstrations using two force-sensing UMI-style handheld grippers for hand motion and contact wrenches, and wearable trackers for body motion. A force-reactive diffusion policy takes vision, proprioception, and measured wrenches as input, then predicts actions and per-hand force commands. A hybrid compliance whole-body controller with force tracking executes these commands while maintaining balance: an integral of the force error measured by real force/torque (F/T) sensors lets each hand track force accurately along the commanded direction and remain compliant along the others. In simulation, the controller tracks per-hand force commands of varied magnitude and direction, with little loss in whole-body motion accuracy. Across three contact-rich tasks on the robot, the force-reactive policy succeeds in 80% of rollouts, compared with 26.7% for a position-only policy trained on the same demonstrations and executed by the same controller. For more details, please visit our website: https://louis-leee.github.io/FLoRe/.

0.49

CompliantWBC: Whole-Body Compliance for Heavy Humanoids via Force Latent Estimation and Residual Impedance Targets

cs.RO ·2026-09-27 ·Tan-Dzung Do, Cuc T. Trinh, Tuan Dat Phuong, Chien Le, Thanh Ly +2 more
similarity 0.76
Abstract · Project website: https://dotandung.github.io/compliantwbc/

Whole-body compliant control is essential for deploying heavy humanoids under high payload in human-centric environments. Most prior force-aware learning-based pipelines focus on end-effector resistance, per-link upper-body springs, or end-effector stiffness modulation, leaving arbitrary-site perturbations on heavy platforms with lower-body engagement largely unaddressed. We close this gap with CompliantWBC comprising: (1) A base policy trained with RL to maximize compliance-fidelity reward, guided by a multi-site whole-body impedance reference controller, extending classical Cartesian impedance to any controlled link; (2) A bounded residual policy that edits the per-link impedance equilibrium over a frozen base, correcting the coarse but structured wrench estimate supplied by a force encoder co-trained behind a gradient barrier; (3) A Phong-weighted force-origin sampler with an axis-decoupled pelvis anchor induces lower-body-inclusive compliance curriculum training via two interpretable parameters. We evaluate CompliantWBC in simulation against both compliant and stiff baselines, achieving best compliant fidelity of 2.58cm deviation from analytical solutions, and demonstrate it on a real heavy humanoid across static/dynamic force reaction, board wiping, squat under payload, and cooperative payload transport. Project website: https://dotandung.github.io/compliantwbc/

0.45

CEER2: Directional and Tunable End-Effector and Root Compliance for Humanoid Loco-Manipulation

cs.RO ·2026-09-30 ·Xinyuan Luo, Chunyuan Yang, Boyuan Chen, Xianyi Cheng
similarity 0.76
Abstract · 8 Pages, 5 figures

Humanoids are increasingly capable of tracking complex whole-body motions, but physical interaction introduces a different challenge. When a robot makes contact with a person or the environment, it needs to respond to external forces while preserving the motion needed for the task. This response can vary across directions in the end-effectors and on the body. For example, an end effector may need to accommodate contact force in one direction while maintaining motion accuracy in another, while the robot body may resist an external force or move with it. We present a compliance framework for humanoid loco-manipulation that combines directional and tunable end-effector (EE) compliance with selectable root compliance for external force rejection or force following. A hierarchical reinforcement learning controller modulates a fixed whole-body tracking policy through high-level EE and root commands, while interaction forces are estimated from proprioceptive history. Our simulation and real-world experiments on a humanoid demonstrate directional stiffness control, online stiffness adjustment, distinct root compliance, compliant manipulation, and collaborative carrying.

0.20

Dataset-Free Compliant Humanoid Loco-Manipulation with Dynamic Online Posture

cs.RO ·2026-10-05 ·Seungho Yeom, Zhenyu Wu, Jaeyoung Huh, Diego Williams, Yuheng Zhi +2 more
similarity 0.74
Abstract

Most humanoid loco-manipulation controllers require human motion data to learn whole-body coordination and posture, leaving policies reliant on external sources to provide this data. We present OCLO (Online-posture Compliant LOco-manipulation), a humanoid loco-manipulation system trained without human motion data and commanded only through two end-effector targets. Because these targets do not uniquely determine whole-body posture, OCLO generates pelvis height and torso orientation online using an analytic reachability prior, further refined through policy-in-the-loop sampling with a task-agnostic cost. OCLO also learns whole-body compliance by displacing end-effector references according to measured forces through a spring-damper model, encouraging the legs, waist, and pelvis to yield to external loads. In simulation, using the reachability prior leads to a 77.8% success rate in acquiring the commanded reference, a vast improvement over the 37.8% success rate accomplished without the prior. Further, refinement reduces end-effector orientation error across all evaluated tasks. The same posture module improves a pretrained SONIC controller on four of five tasks. Without compliance training, policies tend to lose balance under disturbances rather than sacrifice tracking. On a Unitree G1, OCLO maintains balance under end-effector disturbances that cause its ablations to fail and performs seven loco-manipulation tasks, including crouched walking and picking up a box from a low surface. Project website: https://oclo-humanoid.github.io/

0.27

ForPC: Force-Aware Whole-Body Control for Precise Humanoid Cart Pushing

cs.RO ·2026-11-05 ·ZhenYu Zou, Xing Liu, ShiChuang Wang, YunLong Dong, LiNan Deng +3 more
similarity 0.74
Abstract · 14 pages, 7 figures, 4 tables. Project website: https://roboforpc.github.io/. Corresponding author: Cheng Cheng

Humanoid robots are expected to take over strenuous material handling in manufacturing, logistics, and healthcare, where operating existing wheeled carts would let them move heavy loads without modifying the workplace. However, humanoid cart pushing remains challenging because the bimanual grasp closes a force-coupled loop in which the contact wrenches that drive the cart also disturb the robot's balance, and payload changes alter the coupled dynamics. We propose ForPC, a force-aware whole-body control framework that regulates cart velocity through two-stage reinforcement learning. A locomotion prior is first trained under varied hand loads and upper-body postures to provide balance support. A force latent and a state latent are then inferred from onboard observations, without external force sensors, and fed to a residual policy that coordinates bounded arm, waist, and leg adjustments with base-velocity commands. Multi-objective rewards penalize bimanual internal opposition, grasp slip, and actuator saturation, encouraging the policy to apply contact force on demand without human demonstrations. Sim-to-sim experiments show that ForPC reduces cart-velocity RMSE by up to 68.2% relative to a locomotion-only baseline (Loco-only) and cross-track RMSE by up to 74.2% on the multi-bend route. Trained solely in simulation, the policy also transfers to a physical Unitree G1 without real-world training or fine-tuning and, with no payload-specific adjustment, pushes a cart carrying up to 30 kg at 0.5 m/s. These results suggest that humanoid robots could eventually replace humans for efficient material handling in daily life.

0.21

HULK: Learning Whole-Body Forceful Loco-Manipulation for Humanoids

cs.RO cs.LG ·2026-10-06 ·An Dang, Arturo Flores Alvarez, Yu-Ming Chen, Conor Mc Gartoll, Helen Sun +3 more
similarity 0.74
Abstract · 16 pages, 7 figures, IEEE International Conference on Robotics and Automation 2027

Humanoid loco-manipulation of large, heavy objects demands forceful interaction across the entire body. However, such payloads shift a humanoid's center of mass and impose sustained loads across the upper body, challenging balance and command tracking. We present HULK, a whole-body control framework for forceful loco-manipulation. Using model predictive control (MPC) to guide reinforcement learning with predictions of the loaded dynamics, we train two teachers: one tracks arm motions under wrist forces, and the other locomotes while holding large objects against the body. A capture-point control barrier function augments the wrist-force teacher during training to improve balance under load. We distill both teachers into a single policy. Evaluation spans simulation and the Unitree G1. In simulation, the teacher with the barrier function achieves the lowest forward and lateral velocity tracking errors at 10 kg per arm among evaluated controllers and reduces aggregate divergent component of motion (DCM) excursion magnitude by 35.7% relative to MPC-guided reinforcement learning alone. Our wrist-force teacher withstands torso push disturbances of up to 130 N.

0.24

Brace Yourself: Task-Conditioned Environmental Bracing for Forceful Humanoid Manipulation

cs.RO ·2026-09-21 ·Zongyuan Zhang, Christopher Lehnert, Will N. Browne, Jonathan M. Roberts
similarity 0.73
Abstract · Submitted to IEEE Robotics and Automation Letters (RA-L). 8 pages, 6 figures. Video demonstration: https://youtu.be/zPrGLxWJzI4. This work h…

Forceful manipulation is challenging for humanoid robots because interaction forces can disturb whole-body balance. We introduce the Supporting Hand Strategy (SHS), which enables a humanoid to brace against the environment with one hand while performing forceful manipulation with the other. SHS optimises a task-conditioned support configuration that guides two synchronous reinforcement-learning policies, without human motion data or online whole-body trajectory planning. On a Unitree G1, SHS achieved usable contact forces up to 60 N, compared with a maximum sustained force of 13.5 N without environmental bracing, while substantially improving force tracking over a task-independent support configuration. The same policies generalised to different task regions without retraining. SHS therefore provides a simple mechanism for substantially extending humanoid forceful-manipulation capability.

0.37

CompliantBot: Learning Whole-Body Compliance across Task Interfaces for Humanoid Control

cs.RO ·2026-11-01 ·Haoyang Li, Keqi Zhu, Zhanxiang Cao, Yang Zhang, Yizhi Chen +2 more
similarity 0.73
Abstract · 12 pages, 8 figures, 5 tables

Humanoid controllers need the ability to yield to external forces while retaining the capacity to resume their original tasks. However, tracking objectives penalize the deviations needed for yielding, while relaxing tracking goals persistently can make task recovery harder. Existing approaches often rely on task-specific interaction command interfaces or constructed compliant motion data and reference trajectories, limiting the direct reuse of their compliance-training mechanisms across different task interfaces. We introduce CompliantBot, a compliance-training framework for motion tracking and velocity-command locomotion. It preserves the original task inputs and requires no preconstructed compliant data or target trajectories. A state-dependent interaction force field couples applied loads to the robot's motion, enabling local articulation and whole-body movement to change the forces experienced. A complementary force-magnitude reward encourages lower interaction loads, while task rewards are downweighted during loading and restored after release to coordinate yielding and task resumption. The trained policies use task inputs and proprioceptive history without explicit external-force measurements. Across both task interfaces, CompliantBot yields farther under constant pulls and experiences lower spring interaction loads than matched baselines, while resuming task tracking after force removal. CompliantBot achieves the highest task completion among the compared methods under stronger pulls. Power evaluations further show that CompliantBot has the lowest mean joint mechanical power among the compared methods. Real-robot demonstrations further illustrate compliant responses through arm motion, stepping, and body reorientation.

0.23