CS Paper Radar

SynThermFace: Amplifying Limited Paired Data for Visible-Thermal Face Recognition via Synthetic Data Generation

Anjith George, Adam Unal, Sebastien Marcel

cs.CV ·submitted 2026-09-09 15:15 UTC · v1
publishedcode/data

Abstract

Face recognition (FR) is a widely used modality for biometric authentication, but conventional models rely on visible-spectrum imagery and degrade when high-quality RGB images cannot be captured. Cross-spectral face recognition addresses this limitation by matching visible images with other modalities such as thermal imagery, enabling more reliable performance in low-light, nighttime, and unconstrained conditions. However, progress is limited by the scarcity of paired visible-thermal data, which is difficult and costly to collect at scale. We propose SynThermFace, a framework that amplifies limited real visible-thermal supervision into larger paired adaptation datasets for cross-spectral face recognition. A diffusion model is first adapted using a limited set of paired visible--thermal images and then used to generate large-scale paired visible--synthetic thermal data from existing real or synthetic visible face datasets. The generated pairs are used to adapt a pretrained visible-spectrum face recognition model into a CFR model. Unlike synthesis-based approaches that require image translation at test time, the proposed method shifts generation to the training stage and performs inference with a single forward pass through the adapted recognition model. Under the same MCXFace real-pair protocol, PACT improves over the evaluated CFR adaptation baselines, isolating the effect of the proposed adaptation objective. Training PACT on larger generated paired datasets provides additional improvements over both the unadapted model and the real-pair PACT configuration. Cross-database evaluation on the Tufts dataset provides evidence that the learned representation transfers to an unseen database. The source code and trained models will be made publicly available.

Comment
Accepted in BMVC Workshops 2026

Closest papers

Nearest neighbours by meaning across the whole index.

VTF900: A 900-Subject Visible-Thermal Face Recognition Dataset and Benchmark

cs.CV ·2026-10-17 ·Jacob Abaare, Bianca Ianetta, Cedric Nimpa Fondje, Shuowen Hu, Benjamin S. Riggan
publishedbenchmarkhot direction similarity 0.79
Abstract · Accepted at IEEE/CVF Winter Conference on Applications of Computer Vision (WACV) 2027

Despite advancements in visible-thermal face recognition, where thermal probe (query) face images are matched against visible enrollment templates, existing benchmarks are currently limited by small gallery sizes (N $\approx$ 100 subjects). This limitation inhibits the ability to accurately evaluate visible-thermal facial recognition at scale and to report significant recognition performance metrics, which have better operational relevance. Therefore, we introduce VTF900, a large-scale visible-thermal face recognition benchmark with 900 subjects and paired imagery that includes expression, pose, and occlusion variations. VTF900 is designed to support large-scale (i.e., large gallery) evaluations across verification (1:1 matching) and closed-set identification (1:N matching) for visible-thermal face recognition. Furthermore, VTF900 specifically addresses the challenging combination of cross-spectral and cross-dataset analysis. In this paper, after training models on the ARL-VTF dataset, we provide benchmark analyses across convolutional (baseline), vision transformers, and domain-adaptive neural network architectures to assess how these methods scale. At full gallery scale (N = 900), transformer models achieve strong discriminative performance under frontal conditions (e.g., ViT-B: 97.68% AUC, 51.10% TAR@1%FAR), while domain-adaptive methods such as DPIT-ResNet50 demonstrate greater robustness under off-pose conditions (94.68%AUC, 36.08% TAR@1%FAR). Our results show that high AUC at small scale does not translate to reliable performance at deployment scale, and that pose variation significantly amplifies performance degradation. VTF900 exposes these limitations, enabling more rigorous evaluation of cross-spectral face recognition systems.

0.32

Frequency Routing and Identity Conditioning for Thermal-to-Visible Face Translation

cs.CV ·2026-10-13 ·Haojie Li, Xinlong Sun, Xiaohaoyang Lei, Kai Cheng, Yiguo Qiao +2 more
similarity 0.77
Abstract

Thermal-to-visible (T2V) face translation has important applications in nighttime biometric recognition, low-light surveillance, and human interpretation of thermal observations. The task remains challenging because thermal images do not directly record visible appearance, while the cross-spectral cues useful for reconstruction vary across frequency components and semantic roles. Existing spatially conditioned models tend to process these cues through a homogeneous adaptation path and do not explicitly separate local structure from global identity. We propose FreqID-Control, a parameter-efficient framework that organizes thermal guidance according to spectral reliability and semantic role while preserving the pretrained generative prior. It combines frequency-routed low-rank adaptation, which allocates separate transformation subspaces to low-frequency structure and high-frequency detail, with shared cross-spectral identity conditioning, which supplies compact global identity tokens independently of spatial thermal tokens. A controlled analysis on MCXFace and SpeakingFaces provides the empirical basis for this design, revealing stable low-frequency correspondence and edge-localized detail correspondence. Experiments on both datasets demonstrate strong image fidelity and biometric identity preservation, while controlled ablations on MCXFace confirm the complementary contributions of frequency routing and shared identity conditioning.

0.16

IDPrior: Decoupling Identity Generation from Facial Image Synthesis

cs.CV ·2026-11-05 ·Fadi Boutros, Meriç Demirörs, Darian Tomašević, Vitomir Štruc, Naser Damer
publishedcode/data similarity 0.62
Abstract · Accepted at WACV 2027

Large-scale identity-labeled face datasets are essential for training modern face recognition models, yet collecting and annotating such data is costly and raises privacy and ethical concerns. Existing synthetic face generation methods typically derive identities from predefined class labels, unconditional image generation, or predefined latent sampling strategies, without explicitly modeling the underlying distribution of facial identities. In this paper, we propose IDPrior, a two-stage framework that decouples identity generation from image synthesis. We first learn a diffusion prior in the embedding space of a pretrained face recognition model to model the distribution of facial identities and generate novel identity embeddings. These embeddings are then used to condition a pretrained identity-conditioned diffusion model (DM), enabling the synthesis of multiple images of the same identity. This modular design provides a scalable approach to identity generation while remaining compatible with existing and future identity-conditioned DMs. Experiments indicate that IDPrior generates diverse and well-separated identities while maintaining a closer correspondence to the distribution of authentic identities. Face recognition models trained on datasets generated using IDPrior-generated identities achieve competitive or improved performance compared with existing synthetic-data-based methods across multiple face verification benchmarks. Code and generated datasets are publicly available at https://github.com/fdbtrs/IDperturb.

0.38

Photorealistic Novel View Synthesis of Human Faces using Next-Scale Transformers

cs.CV cs.LG ·2026-08-24 ·Federico Stella, Fei Jiang, Zhongshi Jiang, Zohar Barzelay, Emanuel Garbin +2 more
similarity 0.62
Abstract

Photorealistic novel view synthesis of people remains challenging at high spatial resolutions and across multiple target cameras, where preserving identity, fine appearance details, and geometric coherence is critical. We build on the next-scale autoregressive paradigm and adapt it for human-centric view synthesis by enabling higher image resolutions, multi-view outputs and stronger cross-view consistency in a single forward pass. We train on a synthetic dataset of human faces spanning diverse identities and apparel. Contrary to diffusion models, this paradigm does not need 2D pre-training and, thanks to its next-scale architecture, it benefits from lower-resolution, general-purpose pre-trainings, with the full-sized purpose-specific images being used only in the last training stages. This enables our architecture to converge with a smaller amount of purpose-specific training data, allowing us to use a smaller but more realistic training dataset. The resulting model produces sharp and realistic views, with the option to synthesize multiple novel viewpoints simultaneously for improved agreement across views. Empirically, we observe gains in perceptual fidelity and cross-view coherence on human subjects, demonstrating that next-scale autoregression is an effective backbone for scalable, multi-output human view synthesis. We also couple our pipeline with an existing transformer-based model for pixel-aligned 3D gaussian lifting from multi-view facial inputs, resulting in accurate and photorealistic 3D models of human faces.

0.17

AstraSR: Real-World Thermal Super-Resolution with GPT-6 Astra

cs.CV ·2026-10-05 ·Mengyuan Li, Changhong Fu, Jun Zhang, Ziyu Lu, Yuhang Zhang +1 more
dataset similarity 0.61
Abstract

Real-world thermal super-resolution (SR) is constrained by limited sensor resolution and the difficulty of obtaining corresponding high-resolution (HR) observations for direct model supervision. Conventional SR methods typically construct training pairs by treating captured thermal images with real-world degradations as HR references and applying predefined degradation to generate synthetic low-resolution (LR) inputs. Such a construction not only introduces a domain gap between synthetic and captured LR observations but also retains acquisition degradations in the supervision. To address this issue, we propose AstraSR, a real-world thermal SR method guided by GPT-6 Astra, a frontier multimodal generative model endowed with emergent and transformative visual capabilities. Specifically, we construct a dataset of image pairs by using captured LR thermal images to condition GPT-based HR reference. We develop a direct generative supervision strategy that learns from captured thermal inputs paired with GPT-generated HR references. Pixel, gradient, and perceptual losses jointly supervise the transfer of intensity patterns, structural boundaries, and visual details from the generated references. Qualitative comparisons with seven existing state-of-the-art real-world SR methods show continuous object contours, distinct structural boundaries, and smooth intensity transitions in the thermal scenes. These results demonstrate that AstraSR outperforms existing real-world SR methods in both thermal clarity and structural coherence.

0.16

Text2Thermal: Physics-Aware Thermal Image Synthesis from Textual Priors

cs.CV ·2026-09-03 ·Tayeba Qazi, Brejesh Lall, Prerana Mukherjee
position similarity 0.61
Abstract · 35 pages, 6 figures

Thermal infrared imaging offers reliable perception in darkness and adverse weather, but thermal datasets remain scarce, motivating extensive work on translating abundant RGB images into thermal. Such translation is fundamentally ill-posed as thermal appearance is governed by surface emissivity and object temperature, neither of which is observable in the visible spectrum, so a single RGB image is consistent with many valid thermal outputs. We argue that language offers a natural means of resolving this ambiguity, and propose **Text2Thermal**, a framework for physics-aware thermal image synthesis from textual priors. Rather than inferring the unobservable radiometric factors from RGB, we supply them explicitly through thermally grounded captions encoding material, weather, time-of-day, and heat-emission state, and adapt a pre-trained Stable Diffusion backbone to the thermal domain. Because the radiometric content is determined entirely by the prompt, Text2Thermal synthesizes thermal imagery without requiring a registered RGB image at inference. Where spatial guidance is desired, an optional control signal imparts scene geometry without disturbing the prompt-specified radiometry. On M3FD and FLIR, Text2Thermal achieves state-of-the-art FID among thermal image synthesis methods, and we additionally report results on the FMB dataset, while offering text-level control that translation-based approaches cannot provide.

0.18

Adaptive Adversarial Augmentation for Controllable Face Synthesis

cs.CV ·2026-10-08 ·Saransh Suri, Shivang Agarwal, Mayank Vatsa, Richa Singh
similarity 0.61
Abstract

Synthetic data provides a scalable alternative to real-world datasets for training face recognition models, particularly under challenging conditions such as low resolution, occlusion, and masks. Yet, most approaches lack diversity and fail to generalize effectively. We propose Ensemble Feedback Controllable Synthesis (EFCS), a guided framework that generates diverse and challenging samples while preserving visual realism. EFCS expands distributional variability, often reflected in higher FID and KID scores compared to single-feedback and random synthesis, while maintaining high precision. Recognition models trained on EFCS data consistently outperform baselines across multiple benchmarks, showing improved generalization to real-world scenarios. Furthermore, we introduce an analytically motivated formulation linking perturbation-induced difficulty, sample utility, and performance degradation, offering principled insights into balancing synthetic data complexity for optimal training. Together, these contributions establish EFCS as an effective and analytically grounded approach for bridging the gap between synthetic and real datasets.

0.19

Identity-Conditioned Latent Consistency Distillation for Face Synthesis

cs.CV ·2026-08-31 ·Tiago Kienen Chaves, Bernardo Biesseck, David Menotti
publishedcode/data similarity 0.61
Abstract · Accepted for presentation at the 2026 Conference on Graphics, Patterns and Images (SIBGRAPI)

Diffusion models have achieved strong results in high-fidelity image synthesis, but their iterative sampling process makes large-scale generation computationally expensive. This limitation is especially relevant when generating synthetic face datasets for face recognition, where a large number of subjects with many samples in different poses, expressions, ages, etc., are required. In this work, we show that identity-conditioned face synthesis can be performed at a substantially lower computational cost by a latent Consistency Model with few iterations, without compromising image quality. For training, we distill knowledge from the foundation Diffusion Model Arc2Face (teacher) by adapting its original text-to-image pipeline to an embedding-to-face setting, replacing textual prompts with ArcFace identity embeddings. Our distilled model (student) generates identity-conditioned face images with an average inference time of 0.4819 seconds per image, compared with 2.102 seconds for Arc2Face, resulting in a 4.36$\times$ speed-up. Quantitative results, based on FID scores, show that the distilled model remains competitive with Arc2Face across all evaluation protocols. On 100k generated images, it achieves near-parity on CelebA (13.921 vs. 12.928) and outperforms the teacher on WebFace42M (9.317 vs. 9.802). Further evaluations on Synth-500 and AgeDB show a moderate performance gap for the former but comparable results for the latter. These results indicate that Arc2Face can be accelerated through task-specific latent consistency distillation while preserving high image quality for large-scale synthetic face generation. Our proposal is publicly available at https://github.com/UFPR-IPASP-PR/FaceRec-IdentityConsistency.

0.33