CS Paper Radar

Lie-Algebraic Bell Recurrences for Arbitrary-Order Twist Jets and Parallel-Mechanism Closure

Daniel Condurache

cs.RO ·submitted 2026-09-09 18:45 UTC · v1

Abstract

This paper develops an arbitrary-order kinematic construction that links serial propagation, parallel-mechanism closure, and rigid-platform point fields within one dual screw framework. A cylindrical joint is retained as one native physical block, with revolute and prismatic joints obtained as special cases. For each fixed joint axis, ordinary Bell polynomials organize the derivatives of the exponential factor; across a chain, the noncommuting factors remain in their physical order. Initial-frame prefix and terminal-resolved covariant formulas then produce equivalent representations of the serial twist jet. For a parallel mechanism, repeated Leibniz differentiation, with joint-level derivatives organized by Bell polynomials, yields an arbitrary-order triangular active-passive closure recurrence: the same passive Jacobian is solved at every derivative order at a regular configuration, while the right-hand side contains only prescribed active data and lower-order jets. The resulting platform twist jet is mapped exactly to the point-independent affine invariants of the velocity, acceleration, jerk, and snap fields. The validation is deliberately complementary: a generic 3C chain with noncoplanar axes and nonzero rotational and translational cylindrical coordinates tests ordered serial propagation, an RR+RRR spherical wrist tests active-passive closure, and a Hunt-type 6-RUS mechanism with six active revolute joints tests an independently reconstructed platform jet and its affine fields. Independent differentiation of the rigid motion, evaluation of the affine fields, and the differentiated branch closures all agree through fourth order with residuals below $10^{-12}$ in the corresponding SI units. The formulation is purely kinematic and applies at configurations where the selected active-passive partition is regular.

Comment
24 pages, 2 figures. Ancillary files: Python validation scripts (generic 3C chain, RR+RRR spherical wrist, Hunt-type 6-RUS) and numerical results (JSON)

Closest papers

Nearest neighbours by meaning across the whole index.

Dual Park-Ravani Interpolation of Rigid Motions: Acceleration-Field Continuity and Holonomic Hermite Repair

cs.RO ·2026-08-28 ·Daniel Condurache
similarity 0.59
Abstract · 12 pages. Ancillary Python programs reproduce the numerical verification

The Park-Ravani construction generates a twice continuously differentiable, frame-invariant spline on SO(3) by exponentiating cubic canonical-coordinate polynomials. We show that the construction transfers, without changing form, to the group of orthogonal dual tensors, a representation of rigid displacements. The transferred recurrence is stated compactly through the dual extension of the right Jacobian of the exponential map and its first Fréchet derivative. This yields interpolation of prescribed rigid poses and continuity of the body dual twist and its first derivative. Using the higher-order rigid-body kinematics of dual spatial twists, we then prove that the resulting curve has a continuous physical acceleration field, not merely a continuous quantity obtained by formally differentiating the dual part of a twist. We also distinguish algebraic dual transfer from temporal differential prolongation: their simultaneous first-order use takes place in a hyper-dual algebra, and interpolation of arbitrary prolonged nodal data need not be holonomic. A noncommuting three-pose example verifies the recurrence, all knot continuity statements, and dimensional covariance under a change from meters to millimeters. We define and analyze the first-order holonomy defect of a generic hyper-dual interpolant, exhibit an exact counterexample, and remove the defect by cubic or quintic Hermite interpolation in dual logarithmic coordinates.

0.25

Arbitrary-Order Hermite Interpolation of Rigid-Motion Jets via Hyper-Multidual Quaternions

cs.RO ·2026-08-27 ·Daniel Condurache
similarity 0.54
Abstract · 21 pages, 1 figure

We study bilateral interpolation of finite-order rigid-motion jets represented by unit dual quaternions. An order-$n$ multidual (MD) algebra is the truncated polynomial algebra $\mathbb{R}[\varepsilon]/(\varepsilon^{n+1})$; hyper-multidual (HMD) quaternions are dual quaternions with coefficients in this algebra. Temporal HMD transforms encode a pose and its derivatives, whereas a generic HMD curve need not be the temporal jet of its pose projection; we call this requirement holonomicity. We show that a temporal transform and its relative descriptor are unitary and derive recursive coefficient constraints, together with a local realizability converse in an admissible logarithm chart. We then extend screw linear interpolation (ScLERP) algebraically to unit HMD quaternions. Although it matches complete endpoint transforms, direct HMD--ScLERP is generically non-holonomic for arbitrary endpoint jets. We give a coefficient criterion and explicit endpoint and first-order interior contact defects. A holonomic alternative is obtained by mapping endpoint transforms to logarithmic dual-quaternion coordinates, applying the degree-$(2n+1)$ Hermite polynomial that matches derivatives through order $n$, and lifting by the exponential. HMD arithmetic also recovers higher-order rigid-motion acceleration fields without explicit differentiation of $\mathrm{dexp}$. Rotation and full $\mathrm{SE}(3)$ tests through second order, with an additional third-order polynomial check, reproduce the stated defects and endpoint jets.

0.37

Compositional Aeroelastic Operators for Morphing Flexible Multibody Aircraft: A Geometric Framework with Structural Verification

cs.CE math.NAphysics.flu-dyn ·2026-08-15 ·Gelin Chen, Chen Song, Chao Yang
similarity 0.49
Abstract · 30 pages, 2 figures, 2 tables

Morphing flexible multibody aircraft require structural strain, aerodynamic geometry, surface velocity, and generalized loading to remain compatible as joints and flexible components change configuration. A compositional formulation is developed around an assumed material attachment between each lifting surface and a geometrically exact beam. Separating the component root pose from the section field shows that the body strain and elastic potential of a component depend on its own elastic coordinates, while upstream motion enters kinetic terms and external-load pullbacks. At element level, an exact relative logarithm $d$ supplies strain and potential energy, whereas a reference-anchored section coordinate $σ$ supplies deformed section geometry. Finite-order expansions retain the finite reference geometry exactly and truncate only endpoint perturbations. The attachment map then generates surface points, tangents, normals, velocities, and force Jacobians from common section kinematics. Euler--Poincare beam balance, moving-surface potential-flow relations, graph cotangent assembly, and the associated semidiscrete power identity are stated in a common twist--wrench convention. Collocation, pressure, equivalent-load, and structural-station sites are distinguished to expose their approximation errors. Verification gives the expected $N_d+1$ convergence order for degree-$N_d$ relative-log expansions. In a geometrically nonlinear cantilever comparison, a cubic static-manifold correction reduces mean full-record displacement error from $0.479$ to $0.255$ over four completed load cases. These results provide structural and interface-level evidence rather than validation of a complete aircraft aeroelastic prediction.

0.10

Modular Kinematic Reduction of Closed-Chain Mechanisms Using Path Assembly and Defect Homotopy

cs.RO ·2026-09-10 ·Mohammad Dastranj, Jouni Mattila
similarity 0.49
Abstract

Closed kinematic chains complicate modular modeling by coupling active and passive coordinates through nonlinear closure constraints. This paper presents a Path-Assembled Closure Differential Mapping (PACDM) framework for modular closure resolution and kinematic reduction. Each closure element compares two ordered transformation paths with common endpoints, with their mismatch expressed through the logarithm on SE(3) and the corresponding Jacobian assembled from local transformation derivatives. Multi-path modules are constructed from a minimal set of pairwise closure elements, while rank-revealing analysis selects locally independent scalar constraints. A defect homotopy recovers closure-consistent passive coordinates from approximate estimates along a feasible and regular continuation path. At regular configurations, implicit differentiation yields the local active-to-passive differential mapping, which is subsequently used in a predictor-corrector continuation procedure for prescribed motion. The framework is evaluated on a seven-degree-of-freedom heavy-duty manipulator containing two-path and three-path closed-chain modules. Comparison with Simscape Multibody yields trajectory root-mean-square errors below 8.5 x 10^-10 rad, while predictor-corrector continuation is approximately 45.8 times faster than applying defect homotopy at every trajectory sample.

0.52

Modular Inverse Dynamics and Wrench Recovery for Closed-Chain Mechanisms Using Path Assembly

cs.RO ·2026-10-15 ·Mohammad Dastranj, Jouni Mattila
similarity 0.47
Abstract

Rigid closed chains can admit indeterminate internal reactions even when their motion is fully specified. This paper develops a modular inverse-dynamics workflow that combines path-based motion reconstruction with recovery of uniquely determined actuator and joint-wrench outputs. Analytical second-order differentiation of assembled transformation paths supplies passive velocities and accelerations on a regular closure branch. Spatial Newton--Euler balances are then assembled over the physical body-and-joint graph. Established nullspace and dual criteria identify and recover unique outputs, while balance, ideal-joint admissibility and affine-family diagnostics assess nonunique reference reactions. Evaluation against Simscape Multibody uses prescribed motion of a seven-degree-of-freedom heavy-duty hybrid serial--parallel manipulator under common rigid-body, ideal-joint assumptions. The results show close agreement with the reference for passive positions, actuator efforts and uniquely recoverable constraint-wrench components. Reaction diagnostics support compatibility with the admissible numerical load family.

0.16

Adapting Rigid-Body Dynamics Derivatives for Constraint Embedding Closed-Chain Models

cs.RO ·2026-09-17 ·Daniel J. Volpi, Patrick M. Wensing
top venue similarity 0.45
Abstract · 8 pages, 6 figures

This paper extends an existing algorithm for the first-order derivatives of rigid-body dynamics to the case of closed-chain kinematic systems modeled using constraint embed- ding. Many standard dynamics algorithms apply to both open- chain and constraint-embedded models, but existing efficient derivative methods assume joint velocity effects are locally config- uration invariant. We remove this assumption and derive adapted algorithms that extend dynamics derivatives to more general joint types, including those arising in constraint-embedded closed- chain models. Our results compare conventional pin-joint robot models with more complete actuation models that capture local closed chains. We show that the additional terms introduced by these generalizations have low computational impact when mod- eling actuation kinematics alone, but can incur higher cost when additional rigid bodies, such as motor rotors, are included in the actuation chain, or when considering non-local loops. Overall, these results enable more accurate dynamics computations for constraint-embedded actuation submechanisms to be adopted in model-predictive control and differentiable simulation.

0.59

InKAN: B-Spline KANs via Truncated Power Form

cs.LG math.NA ·2026-09-02 ·Naveen Mysore
code/data similarity 0.45
Abstract · Open-source implementation: pip install inkan, experiments (speed, classification, regression), 8 Pages

Kolmogorov-Arnold Networks (KANs) place learnable B-spline activations on network edges rather than fixed activations on nodes. The standard Cox-de Boor recursion evaluates these activations through $k$ sequential passes for degree-$k$ splines, consuming over 90% of forward-pass time. InKAN replaces this recursion with the truncated power form, a classical result from approximation theory that expresses each uniform cubic B-spline as five $(x)_+^3$ terms at shifted knot positions. The resulting expression computes exact B-spline basis values: the same mathematical function as the Cox-de Boor recursion, evaluated without sequential passes. This paper documents three contributions: (1) an implementation structured for torch . compile fusion, eliminating recursion, span lookup, and scatter-gather operations; (2) a bounded-coordinate evaluation that clamps the normalized input to $[0, k{+}1]$, preventing the growth of cancellation error at large off-support coordinates; and (3) an open-source package (pip install inkan). In the tested configurations, InKAN has 2.8--3.5$\times$ lower forward-pass latency than the Cox-de Boor recursion. Partition-of-unity errors remain below $10^{-5}$ for grid sizes up to 200.

0.68

Parallel Integration over Simple Radical Extensions II: Mixed Towers

cs.SC ·2026-09-12 ·Sam Blake
theory similarity 0.45
Abstract

In Part I we extended the structure theorems underlying the Risch--Norman (parallel Risch) method to a simple radical extension $L=K(y)$, $y^m=q$, of a differential field $K=F(t_1,\dots,t_n)$ closed under the derivation. Here we remove the closure hypothesis: the radical may occupy any position in the tower, so that the derivatives of the generators above it involve $y$ --- the setting of Bronstein's algorithm for mixed elementary functions. The working ring is $\cA=\cO[t_{j+1},\dots,t_n]$, the integral closure of $F[t_1,\dots,t_n]$ in $L$: a Krull domain, free over the polynomial ring on Trager's basis, so that all factorisation remains in a unique factorisation domain. The denominator of the derivation is no longer an element but a divisor $\fd_D$ on $\cA$, and the valuation lemma takes the unified form $v_P(Dg)=v_P(g)-(1+v_P(\fd_D))$ at normal height-one primes, subsuming the shifts $\{1,e_P\}$ of Part I; the proof localises and requires no cancellation analysis. Stability of the class group and the unit group, $\Cl(\cA)\cong\Cl(\cO)$ and $\cA^*=\cO^*$, splits the admissible logands into $S$-units of $\cO$ --- computed by the machinery of Part I --- and irreducible polynomials moving in the upper variables, whose residues must be constants. We prove degree bounds in the top variable and describe the resulting algorithm, which --- unlike the classical parallel method, whose failure proves nothing --- returns certificates of non-elementarity in two situations: a residue outside the constant field, and, when every bound in force is proved, a residue-free remainder that the linear system shows to be non-exact.

0.26