CS Paper Radar

REACH: Controller-Managed Long-Span ECC for HBM AI Inference

Rui Xie, Yunhua Fang, Asad Ul Haq, Linsen Ma, Sanchari Sen, Swagath Venkataramani, Liu Liu, Tong Zhang

cs.AR ·submitted 2026-09-09 21:57 UTC · v1

Abstract

High-Bandwidth Memory (HBM) cost motivates stronger controller protection that can support a wider range of device error rates. Long-span error-correcting codes provide stronger protection at a comparable code rate, but a direct implementation couples small accesses to span-wide state and requires costly decoding at HBM bandwidth. Read-dominated LLM decode offers a favorable setting: sequential reads support span aggregation, while sparse writes limit parity-update traffic. This paper presents REACH, a controller microarchitecture that uses established inner codes to correct common errors and identify unresolved chunks, reserving a long outer code for known-erasure repair. Differential parity bounds write traffic, and a co-designed endpoint preserves 32\,B transactions without an extra data burst. Ramulator2 sustains 1.88\,TB/s of application traffic at the highest error stress, while separate full-interface sizing supports a 2.69\,TB/s application target using ASAP7-synthesized kernels. At this analytical target, REACH's nominal composition uses 55.8\% less controller area and 57.7\% less modeled power than the evaluated mean-work direct-long design, showing the benefit of reserving long-span recovery for exceptional requests.

Closest papers

Nearest neighbours by meaning across the whole index.

Completion-Path Credits: Multi-Resource Control for Scale-Up Fabrics

cs.NI ·2026-08-18 ·Fan Yang, Jiaqi Liu, Tao Jiang, Zhan Wang
similarity 0.64
Abstract · 10 pages, 5 figures

Scale-up fabrics connecting GPUs and AI accelerators carry tensor transfers together with remote reads, writes, atomics, and notifications over shared target-side receiver resources. Byte-denominated credits protect link buffers and streaming HBM traffic, but poorly represent small operations dominated by Atomic execution or response injection. This paper presents SemaCredit, a receiver controller that admits each remote-memory operation against a vector of target-resource demands and returns each component when its corresponding HBM, Atomic, or response stage completes. In a deterministic event simulator with multipath queues, eight HBM partitions, a serialized Atomic engine, and a response engine, SemaCredit matches a strong per-resource byte baseline on HBM-hotspot traffic while reducing small-operation P99 latency by 52.4% under Atomic contention and 10.2% under response incast. Application-shaped mixes show 57.7% and 14.5% P99 latency improvements for AllReduce-shaped and remote-read-shaped traffic while matching byte credits on HBM-dominated MoE traffic.

0.12

HBFSim: A Simulator for Exploring HBF in Memory Hierarchies for LLMs

cs.AR cs.ET ·2026-10-16 ·Jinheng Li, Guosheng Wang, Hongchao Du, Shangyu Wu, Qiao Li +1 more
publishedcode/datahighly cited similarity 0.63
Abstract

High Bandwidth Flash (HBF) has recently emerged as a promising technology that provides terabyte-scale accelerator-local capacity at bandwidths approaching HBM, with a potential cost-per-bit advantage over HBM. However, its NAND foundation brings long latency, out-of-place updates, and finite write endurance directly into the accelerator memory hierarchy, making its effects on performance and lifetime difficult to predict. To study this emerging design space, we present HBFSim, an LLM-aware event-driven simulator for heterogeneous HBM+HBF memory systems that preserves application-level memory semantics while modeling flash-internal behavior. HBFSim models HBM, HBF with host-managed flash translation, and conventional capacity tiers in one simulation driven by a calibrated serving frontend. Using HBFSim, we study decoding of Llama-3.1-70B and Qwen3-235B-A22B under three workloads that differ in their input and output lengths. HBF serves data that does not fit in HBM 11.0--19.0$\times$ faster than host DRAM; HBM is better used to hold the running sequences' KV cache than as a cache for HBF; and at a published peak load of Llama-3.1-70B, HBF lasts 2.0 to 6.9 years, in proportion to the stacks that share the KV writes. The artifact is available at https://github.com/FlashLabAE/HBFSim and will track public HBF device data as it becomes available.

0.52

Beyond Host-Side Control: HBM Controller Partitioning Across Host and HBM Base Dies

cs.AR ·2026-11-07 ·Tharunya Yogananda, Wantong Li
published similarity 0.63
Abstract · Accepted to IEEE International 3D Systems Integration Conference (3DIC)

Recent generations of high bandwidth memory (HBM), such as HBM4, allow the base die of the memory stack to be manufactured using a logic process that can accommodate more complex controller functions next to the DRAM. We present the first systematic quantitative study of function-level controller placement between the host and the HBM4 base die on a silicon interposer. We divide the controller into its main functions and evaluate four placements, from a complete host controller to a complete base die controller, with intermediate placements that move maintenance or scheduling to the base die. We extend Ramulator 2 with HBM4 timing and maintenance, model a die-to-die (D2D) link with timing checks at the DRAM interface, and compose area, energy, and temperature from synthesized controller blocks, modeled storage, and interface data. A provisioned D2D link preserves per-stack bandwidth and adds about twice its one-way delay to unloaded latency. Maintenance moves to the base die with no bandwidth cost and frees host command slots, and the freed share grows with stack height. Replacing the wide interface with a D2D link saves 61% of host shoreline and 16.85 mm2 of host area per stack. The D2D link dominates the added base die area and power, and the base die runs cooler under streaming with link energy below 0.4 pJ/bit. Shared control delivers up to 1.72x the throughput of static partitioning between two requestors.

0.36

Scalable Packet Tracking on FPGAs for Erasure-Coded RDMA over Lossy WANs

cs.AR ·2026-09-18 ·Yicheng Qian, Konstantin Taranov, Yevgeny Yankilevich, Assaf Shacham, Mahmoud Elhaddad +3 more
published similarity 0.62
Abstract · This paper appeared in the 36th International Conference on Field-Programmable Logic and Applications https://2026.fpl.org/

Modern AI workloads increasingly rely on scale across architectures that interconnect multiple datacenters to form a single "AI factory", overcoming the power and cooling constraints of individual sites. However, extending Remote Direct Memory Access (RDMA) across wide area networks (WANs) introduces fundamental challenges: multi-path packet reordering, high latency, and packet loss that severely degrade performance. While erasure coding (EC) has emerged as a promising mechanism for loss recovery, its effectiveness critically depends on efficient packet arrival tracking implemented in hardware. We present COmpact Multi-path Erasure-coded Tracking (COMET), the first fully hardware-offloaded packet-arrival tracking design implemented on an FPGA-based network interface card (NIC) for multi-path RDMA over lossy WANs. COMET employs a scalable cache-based architecture that supports operation at high link rates. Our evaluation shows that COMET sustains line rate operation at 400 Gbps and beyond. Critically, COMET decouples on-chip memory footprint from link Bandwidth-Delay Product (BDP), and its cache-based architecture (COMET Cache) enables supporting 6 times more concurrent connections than state-of-the-art (SOTA) SoC-based designs. These results demonstrate that scalable, fully hardware-offloaded packet-arrival tracking is practical on FPGA-based NICs at current data rates, and its architectural scalability extends to emerging 1.6 Tbps NICs and beyond.

0.40

StrataFlux: Memory-Hierarchy-Native Low-Bit LLM Inference

cs.LG cs.DC ·2026-11-05 ·Jake Hyun, Ziyu Zhao, Jae-sun Seo, Mohamed S. Abdelfattah
similarity 0.61
Abstract · 34 pages, 18 figures, 44 tables. Includes appendix

Quantization reduces the memory and bandwidth demands of large language model (LLM) inference but can degrade accuracy; offloading higher-precision data can instead stall generation. We introduce StrataFlux, a framework that challenges this tradeoff by recovering accuracy lost to low-bit weight and key-value (KV) cache quantization while retaining quantization's memory and speed advantages. StrataFlux co-designs refinement representation, selection, and delivery to make host RAM and solid-state drives useful sources of additional precision. Its selective precision streaming reduces transfer volume, overlaps delivery with computation, and reuses fetched precision across decoding steps so generation need not wait for every transfer. We evaluate 2-4-bit weights and 2-3-bit KV-cache on dedicated GPUs and unified-memory platforms. For 2-bit Llama-3.1-8B-Instruct weights, StrataFlux reduces WikiText-2 perplexity from 9.46 to 8.40 while maintaining 95.4% of the quantized base's throughput on RTX 5090. With 2-bit weights and KV, StrataFlux raises Qwen3-8B's AIME 2024/2025 accuracy from 11.0% to 47.1% at unchanged GPU memory use. At 128K context, Llama-3.1-8B-Instruct with 3-bit weights and 2-bit KV achieves comparable perplexity and speed to vLLM's 4-bit AWQ weights and 8-bit KV on RTX 5090, using approximately half the GPU memory. These results show that GPU-resident precision need not set the accuracy ceiling, nor offloading-tier latency dictate decoding speed.

0.20

Tri-Stack-PIM: A Heterogeneous Multi-Die 3D-Integrated Processing-in-Memory Architecture for Efficient LLM Inference

cs.AR ·2026-11-10 ·Shuao Jia, Zichao Ling, Chen Bai, Kang Zhao, Jianwang Zhai
similarity 0.61
Abstract · 11 pages, 9 figures

Large language model (LLM) inference during autoregressive decoding is fundamentally memory-bandwidth-bound. Existing three-dimensional (3D) stacked processing-in-memory (PIM) architectures alleviate the off-chip bandwidth wall, yet remain constrained by several limitations: physical layer (PHY), controllers, and direct memory access (DMA) engines compete with arithmetic units for advanced-node base-die area; hybrid-bonding keep-out zones fragment the base-die floorplan and impede physical design; compute tiles built in a dynamic random access memory (DRAM) process are restricted to low logic density, capping achievable throughput; and nonlinear operations offloaded to the host reintroduce a communication bottleneck. We present Tri-Stack-PIM, a heterogeneous three-die architecture that resolves these tensions by dedicating a top DRAM die to storage, a middle buffer die on a mature process node to PHYs, DMA engines, and near-memory compute units, and a bottom base die on an advanced node exclusively to single-instruction-multiple-data (SIMD) multiply-accumulate (MAC) arrays. We further introduce a Unified Buffer-Aware Ready-based (UBAR) hardware out-of-order micro-operation scheduler that enforces cross-die dependency correctness at runtime while maximizing issue-slot utilization through a multi-term priority function, recovering up to 90% of the cycles that an in-order policy would forfeit. A joint architecture-dataflow co-exploration identifies Pareto-optimal configurations that reduce the energy-delay product (EDP) by 33-66x over naive parameter selection. Evaluated across multi-head, grouped-query, and multi-query attention (MHA, GQA, MQA) mechanisms with batch sizes 1-32, Tri-Stack-PIM achieves geometric-mean speedups of 4.95x, 2.57x, and 1.68x across all three attention mechanisms and batch sizes over a graphics processing unit (GPU) baseline, AttAcc, and H2-LLM, respectively.

0.18

HBFlex: A Flexible Memory System for Bridging Fine-Grained LLM States and Coarse-Grained HBF Parallel Execution

cs.AR ·2026-09-16 ·Shuzhang Zhong, Weikai Xu, Yifan Zhou, Tongbin Zhao, Tenghao Zhao +5 more
similarity 0.61
Abstract

Large language models (LLMs) require increasing memory capacity to accommodate growing model weights and KV caches. High-Bandwidth Flash (HBF) offers high memory density and aggregate read bandwidth through massive plane-level parallelism, making it an attractive option for LLM serving. However, serving LLMs entirely from HBF introduces three challenges: fine-grained KV reads create placement and access imbalance, incremental writes interfere with foreground reads, and mixed KV lifetimes amplify garbage collection. Hybrid HBM/HBF designs retain HBM to support dynamic KV management, but this allocation reduces the HBF resources available under a fixed packaging budget, limiting aggregate HBF bandwidth. We present HBFlex, a full-HBF memory system with coordinated optimizations for KV reads, writes, and reclamation. HBFlex balances KV placement and attention accesses to improve plane utilization. It aggregates incremental updates and schedules writeback within sufficiently long compute windows to reduce write--read interference. It also combines lifetime-guided block packing with deferred reclamation to reduce valid-page migration. We evaluate HBFlex through trace-driven simulation across different configurations. HBFlex achieves average throughput speedups of up to 1.58$\times$ over FlashAccel and 3.30$\times$ over H3, benefiting from higher HBF bandwidth and more efficient management of dynamic KV-cache reads, writes, and erases.

0.38

SlipStream: Enabling HBF for GPU Systems by Mitigating the Latency and SRAM Overheads

cs.AR cs.DCcs.LG ·2026-11-10 ·Anish Saxena, Hritvik Taneja, Christos Kozyrakis, Aamer Jaleel
top venue similarity 0.60
Abstract · To appear in 2027 IEEE International Symposium on High-Performance Computer Architecture (HPCA)

Large language model (LLM) inference demands ever more memory capacity for larger models and batch sizes. High-Bandwidth Flash (HBF) replaces the DRAM dies of HBM with NAND flash and provides up to 16x the capacity at comparable read bandwidth. However, HBF can incur a read latency of nearly 20$μ$s, 20x that of HBM, so on-demand HBF accesses slow inference by up to 12.8x. Conventional cache-line prefetchers require 20x more in-flight tracking state to cover this latency. Tensor-streaming designs, such as H3, follow virtual-address order as opposed to kernel-demand order, and therefore need hundreds of megabytes of buffering. We propose SlipStream, a software-hardware co-designed prefetcher that turns prefetching into a demand-paced producer-consumer pipeline. In software, SlipStream profiles the repeatable weight-page demand order of data-independent LLM kernels and inserts a staging warp that replays this order with non-blocking STAGE instructions. In hardware, the staging warp acts as the producer and the work warps as consumers. Our key insight is to retire each STAGE tracking entry only when demand first accesses the page, as opposed to when the page returns from HBF. Demand thus paces staging and bounds how far staging leads consumption. SlipStream tracks 4 KB pages instead of cache lines and allocates buffer slots only when pages return, which decouples the buffer size from outstanding traffic. Across seven dense models spanning 16-800 GB, SlipStream with a 40 MB staging buffer achieves 92.4% of the performance of an ideal HBF with HBM-like latency. H3 achieves only 43.1%, even with a 320 MB buffer. The buffer sizing of SlipStream is independent of HBF latency and workload. SlipStream with 16 MB buffer, 20x smaller than that of H3, performs within 4% of SlipStream-40MB. SlipStream also supports Mixture-of-Experts models and reaches 91.2% of ideal performance (40 MB buffer).

0.48