CS Paper Radar

Phase-Decoupled, Model-Calibrated Power Control for Disaggregated LLM Serving

Jae Gon Kim, Donghoon Yoo, Hanyul Ryu, Sungho Ha, Juyeon Lee, Soojung Ryu

cs.LG cs.DC ·submitted 2026-09-10 06:23 UTC · v1

Abstract

Datacenter GPU power is the binding constraint on LLM serving capacity, and production serving has shifted to prefill/decode (PD) disaggregation. Deploying NVIDIA's Max-Q inference profile on a disaggregated B200 system, we found its realized gain modest (+8.6% tokens/J), model-dependent, and carrying a mean end-to-end latency cost (+5.2%) that throughput-only evaluation does not surface; the profile also applies one setting to prefill and decode GPUs that operate in opposite hardware regimes. We hypothesize that the optimal power setting is a property of the deployed (model, quantization, engine, hardware) combination rather than of the GPU class, that each lane warrants its own profile, and that converting SLO headroom into energy safely requires latency-gated calibration under a runtime SLO guard rather than a fixed recipe. We present a phase-decoupled, model-calibrated controller: the prefill lane runs under an SM-clock window whose floor is a latency guarantee by construction, and the decode lane under a power cap placed by automatic calibration just above a measured throughput/latency cliff. Because a disaggregated decode lane draws flat, memory-bound power, the cap binds continuously, the reactive-overshoot weakness that led POLCA to reject capping is absent, and the GPU's own power manager retains throughput under the cap. On an 8x B200 node serving Qwen3-Coder-480B (FP8) under agentic load, our balanced mode delivers +20.4% tokens/J at +3.5% mean e2e versus +8.6% at +5.2% for Max-Q, a Pareto improvement on both axes. On Qwen3-235B-A22B (NVFP4) every operating mode meets the ITL-p99 SLO in every repetition; both vendor profiles miss it. A decode-actuator A/B shows the calibrated cap beats static clock locks, and a three-day sustained run saves 32.3% of a lane pair's electricity. Both models are MoE; a dense model recovers roughly 5x less, so we scope our claims to MoE serving.

Closest papers

Nearest neighbours by meaning across the whole index.

A Matter of Stages: Energy-Latency Trade-offs in Multimodal LLM Serving

cs.DC ·2026-11-16 ·Yifan Sun, Jiantong Jiang, Zhexiang Zhang, Xu Bai, Feng Liu +2 more
similarity 0.70
Abstract

Online serving of multimodal large language models requires deciding whether to separate visual encoding (E), prefill (P), and decode (D) across GPUs and how to configure their frequencies. EPD disaggregation enables independent stage control, but it also changes communication and queueing behavior. Lowering one stage's frequency can increase queueing and prolong execution across the EPD pipeline. Consequently, reducing power at one stage does not necessarily reduce total GPU energy per request. In this paper, we systematically characterize fused and EPD-disaggregated serving across four multimodal models under a fixed three-GPU budget, followed by single-stage and uniform downclocking experiments across 18 workload combinations. We find that disaggregation reduces GPU energy per successful request by 13.3-37.0% at nearly identical output-token throughput, but increases mean TTFT. Downclocking exhibits distinct stage sensitivities, and aggressive frequency reductions can offset power savings through queueing and longer execution. Across the evaluated workloads, uniform downclocking to 80% reduces GPU energy by 11.7-18.6% with modest mean-latency changes. Guided by these findings, we develop a budgeted frequency exploration strategy to select energy-efficient configurations under latency constraints. Evaluation shows that four probes can identify the lowest-energy feasible configuration among 25 measured candidates across all 288 evaluated positive-margin SLO scenarios. These results provide practical guidance for energy-efficient multimodal serving.

0.21

Characterization of Request and Token Energy Costs for LLM Inference Workloads on GPU Platforms

cs.PF cs.DCcs.LG ·2026-08-28 ·Prabhu Vellaisamy, Vanessa Lam, Shawn Blanton, John Paul Shen
publishedhighly cited similarity 0.68
Abstract · Accepted at the 2026 IEEE International Symposium on Workload Characterization (IISWC 2026). 13 pages, 6 figures, 9 tables

Large language model (LLM) inference serving is priced by tokens, but GPU energy is consumed over inference windows. This accounting mismatch makes token-normalized metrics incomplete, since average output-token energy can decrease even when total request energy increases. We characterize this behavior with a decomposed energy model: a fixed one-time prefill with a fixed generation setup cost, while each output-token generation step adds marginal step energy. We evaluate this LLM inference energy model on NVIDIA H100 and H200 GPUs across dense and mixture-of-experts (MoE) models, reporting both request energy and token energy as functions of model type (M), phase (P), batch size (B), context length (C), and output length (N). For Llama-3.2-1B on H200 at batch-16 and context-4K, increasing output length from 10 to 512 tokens reduces token energy from 7.46 to 0.72 J/token while total batched inference-window energy increases from 1.19 to 5.93 kJ. Batching also reduces token energy, but the gain is context-bounded: at 10 output tokens, the batch-16 to batch-1 gain falls from 6.31x at context-512 to 1.17x at context-4K. MoE models amplify this effect: sparse routing and fragmented expert execution increase fixed energy at low concurrency, while batching spreads that energy across more generated tokens and substantially narrows the dense-vs.-MoE token-energy gap. These results show that energy-aware serving should jointly optimize both request energy and token energy, rather than only reducing per-token energy cost.

0.44

Calibrate, Then Route: A Measured Study of Learned Request Routing for Disaggregated LLM Serving

cs.AI ·2026-09-14 ·Srikanta Datta Tumkur, Jay Iyer, Mehar Simhadri, Sai Pavan Kumar, Sai Kapil Kumar +1 more
similarity 0.67
Abstract

Disaggregated LLM serving places compute heavy prefill and memory heavy decode on separate GPU pools. Systems such as DistServe, Splitwise, and Mooncake make this separation fast, but routing still determines which instances handle each request. We study a router that estimates the additional completion time on each instance using exact prompt length, predicted output length, post admission KV cache pressure, and SLO class. We develop the policy in a discrete event simulator and validate it on eight NVIDIA A40 GPUs, each running a vLLM engine, with NIXL transferring KV caches between pools. All workloads run at measured saturation. Across three mixed, bursty arrival traces, the calibrated router achieves the highest mean goodput at 0.864, compared with 0.835 to 0.847 for round robin, least loaded, and a length heuristic. It also shows the lowest variance across traces. It beats round robin and the length heuristic on all three traces and least loaded on two. On the third, it trails by 0.003, within run to run noise. Hardware calibration matters: simulator derived constants cost 4.5 goodput points and roughly 40 percent of the tail latency advantage, reducing the scorer to little more than queue counting. Benefits grow with decode pool size and traffic heterogeneity but disappear in pools with three instances, where queue counts are often enough. Under extreme scarcity, greedy cost minimization concentrates requests on the cheapest scored instance, and blind spreading performs better. With calibrated costs, the learned router matches the goodput of round robin using six GPUs instead of seven.

0.43

Where Does the Energy Go? Profiling LLM Agent Inference on Blackwell GPUs

cs.DC ·2026-08-31 ·Qi Luo, Kunlin Li, Ziwen Wang, Yun Chen
similarity 0.66
Abstract · 11 pages, 6 figures

LLM agents that iteratively reason, plan, and invoke tools create workload profiles fundamentally different from single-pass inference, yet how their energy consumption is distributed across hardware components and workload phases remains poorly understood. Characterizing these workloads therefore requires simultaneous visibility into both component-level power and phase-level execution. We conduct a full-stack energy profiling study combining NVML GPU counters, Intel RAPL CPU/DRAM counters, and Intelligent Platform Management Interface (IPMI) system-level sensors on 2x NVIDIA RTX PRO 6000 Blackwell GPUs, and profile three representative workloads with Qwen3.8-27B. For mathematical reasoning, we compare thinking-enabled and thinking-disabled modes. Our measurements reveal that GPU-only telemetry misses 41-45% of system energy across all three workloads, with non-GPU components accounting for the remainder. In our setup, the sequential agent workload consumes 63x more system energy per output token than saturated serving, reflecting the absence of batching, context growth across turns, and tool-induced idle periods. Extended thinking generates 21-75% more tokens per problem, while per-token energy differs by less than 1% between modes within each dataset, indicating that the resulting increase in energy is driven by output volume rather than a change in per-token efficiency. Continuous batching improves system-level energy efficiency by 3.2x from 1 to 16 requests per second, as GPU power plateaus while throughput continues to increase with batching depth. For the memory-bandwidth-bound reasoning workload, throughput remains unchanged under per-GPU power caps of 400-600 W but drops sharply at 300 W. These findings suggest that context-management techniques such as summarization and selective retrieval may help reduce energy consumption in agent deployments.

0.44

ECO: Energy-Oriented Configuration Optimization for Attention FFN Disaggregated LLM Serving

cs.AR ·2026-10-06 ·Zou Qingyun, Bin Gao, Zhuobin Huang, Weng-Fai Wong, Tulika Mitra +1 more
similarity 0.66
Abstract

Energy-efficient LLM serving requires minimizing serving GPU energy while meeting latency and throughput service-level objectives (SLOs). Attention--FFN disaggregation (AFD) enables separate resource allocation and operating controls for attention and expert computation, but their energy effects remain coupled through the execution pipeline. Realizing its energy-saving potential therefore requires navigating a hierarchical configuration space in which deployment structures constrain admissible controls and shape their end-to-end effects. Finding low-energy configurations that meet SLOs is challenging because physical evaluations are costly and only a small fraction of candidates can be measured. We present Energy-Oriented Configuration Optimization (ECO), which jointly searches deployment structures and their admissible operating controls under a limited measurement budget. ECO constructs a structure-aware energy prior from calibrated stage behavior and pipeline dependencies, then learns residual prediction errors with a Gaussian process. Its cost-aware constrained Bayesian optimization prioritizes measurements according to expected energy improvement while accounting for SLO feasibility, execution success, and evaluation cost, and returns the lowest-energy measured feasible configuration. Across all 16 scenarios on A6000 and A100 with Qwen and DeepSeek, ECO's frozen configurations, evaluated on disjoint requests, reduce serving energy by 40.5\% and increase output token rate by 20.7\% on average relative to baselines while meeting target SLOs. Across the 8 A6000 scenarios, its selected feasible energy averages 33.1\% below generic constrained Bayesian optimization and 25.8\% below genetic search.

0.21

A principled approach for energy-efficient training via phase-aware GPU frequency tuning

cs.DC cs.LG ·2026-09-21 ·Miguel Braga, Júlio Pinto, Rahma Nouaji, Olivier Michaud, Bettina Kemme +3 more
similarity 0.65
Abstract

Modern AI model training imposes unprecedented computational demands, making it a key contributor to datacenter energy consumption. Yet a significant fraction of the energy consumed during training does not translate to useful computation due to bottlenecks throughout the training pipeline. We present PAFT, a phase-aware, dynamically adaptable GPU frequency tuning system that reduces energy consumption of training workloads with minimal performance overhead. The key insight behind PAFT is that bottlenecks represent an energy optimization opportunity, rather than purely a performance problem: when GPUs are bound to stall, PAFT opportunistically reduces their clock frequencies to match the pace of bottlenecked devices, saving energy without impacting execution time. PAFT achieves this by continuously monitoring pipeline behavior and applying fine-grained frequency adjustments, adapting to workload and system changes. Experiments conducted on twelve widely used models show that PAFT consistently outperforms all baselines, achieving energy savings of up to 46% with an average overhead of 4%.

0.14

Exploiting What NVIDIA Profilers Hide: Fast and Accurate Analytical GPU Performance Modeling

cs.AR cs.PF ·2026-11-10 ·Ziwen Wang, Qi Luo, Kunlin Li, Changxi Liu, Dongsheng Wang +1 more
similarity 0.64
Abstract · 13 pages, 7 figures, 2 tables

GPUs have become essential to many fields, including AI and scientific computing. As GPUs grow more complex, the design space of their hardware configurations becomes increasingly large, yet cycle-level simulators remain too slow to explore it. Analytical models make this exploration much faster. However, existing GPU analytical models fall short of accurately predicting performance across hardware configurations, because they re-estimate or scale every stall of a warp on the target configuration. We observe that fixed-latency stalls stay the same across configurations, whereas queueing stalls vary with the pressure on each hardware unit. Based on this observation, we propose ForeSight, a queueing analytical model that reuses the fixed-latency stalls measured on GPU hardware and recomputes the queueing stalls of each hardware unit from its pressure. To provide ForeSight with the counter values of each hardware unit, we build UnitSight, a profiler that recovers these values, which NVIDIA's official profilers hide by aggregating across units. Our evaluation on hardware configurations of nine NVIDIA GPUs shows that ForeSight predicts kernel execution time with a mean absolute percentage error (MAPE) of 8.3%, compared with 14.1% for the best baseline. ForeSight also predicts the end-to-end execution time of LLM inference on vLLM with a MAPE of 2.0%. It runs 49x faster than the cycle-level simulator Accel-Sim and faster than interval-based models such as GCoM. With the aid of ForeSight, we explore configurations derived from the H20 GPU for LLM inference and find one with 1.78x its performance/cost.

0.24

TokenPowerSandbox: Evidence-Gated CPU-First Screening for Energy-Aware LLM Serving

cs.AR cs.AIcs.DCcs.LG+1 ·2026-08-11 ·Chenxu Niu
similarity 0.64
Abstract

Energy-aware LLM serving requires comparing configurations under realistic request shapes, yet exhaustive target-GPU profiling is costly and a cheap predictor can be dangerously confident outside its measured scope. We present TokenPowerSandbox, an evidence-gated workflow that combines an interpretable CPU-resident projector, short target-GPU probes, full-workload verification, and tamper-evident freeze-before-measurement provenance. On one NVIDIA H100 80GB serving Qwen2.5-7B-Instruct with vLLM, three anchor repeats and six development workloads calibrate workload transfer. The same frozen model is evaluated on a blind holdout and a separately predeclared no-refit confirmation totaling 51 post-freeze runs. Energy MAPE is 6.23% and 7.35%, with Spearman rank correlations of 0.976 and 0.933. However, a predeclared TTFT gate passes at concurrency four (9.27% MAPE) and triggers abstention below four (64.80%), showing why energy accuracy cannot certify latency.

0.04