CS Paper Radar

SEED-UMI: Sharing the Exoskeleton between human and robot for onE-to-one Dexterous demonstration

Tengbo Yu, Jiahao Wu, Daohan Li, Bingxu Chen, Hao Liu, Xiaojian Ma, Hangxin Liu

cs.RO ·submitted 2026-09-10 16:08 UTC · v1

Abstract

Imitation learning for dexterous hands is bottlenecked by the difficulty of collecting contact-rich demonstrations that transfer faithfully to the robot. Prior wearable-exoskeleton systems record only on the human side and retarget via open-loop mappings calibrated in free space, which degrade under contact. We present SEED-UMI, a framework in which both the human and the robot wear the same exoskeleton: joint encoders become a physically shared measurement, and wrist cameras mounted to the exoskeleton observe the same outer mechanism during both human data collection and robot policy rollouts. This turns retargeting into paired cross-embodiment supervision and lets policies train directly on raw exoskeleton-centric wrist images, without segmentation or inpainting. On five contact-rich tasks, SEED-UMI achieves 3.0x greater data collection efficiency than exoskeleton-based teleoperation and a 70.0% average rollout success rate.

Closest papers

Nearest neighbours by meaning across the whole index.

ExoBridge: Learning a Bare Hand to Hand-Worn Exoskeleton Mapping through Human Limb Coupling

cs.RO ·2026-10-06 ·Ruitong Tian, Xianyao Li, Noah B. Wilson, Fang Xu, Eric Jing Du
similarity 0.78
Abstract · 8 pages, 6 figures

Human video offers a scalable source of experience for dexterous robot learning, but obtaining motion and tactile supervision while preserving bare hand interaction remains challenging. We present ExoBridge, a framework that leverages human limb coupling to learn a bridging function from bare hand video to the motion and tactile state of a sensorized exoskeleton. Our central idea is to use coordinated bimanual behavior to connect an uninstrumented visual source with a measured manipulation interface. During collection, one hand remains bare and provides visual observations, while the opposite hand wears the exoskeleton and supplies synchronized motion and tactile measurements. These paired demonstrations train a temporal visual model to predict fingertip contact, continuous tactile intensity, and relative encoder motion from bare hand video alone. The exoskeleton defines an intermediate state space whose motion coordinates are linked to a dexterous robot hand through existing calibration. Evaluation on 1,215 demonstrations across four manipulation tasks uses held out collection sessions and yields a pooled any contact AUROC of 0.916 and a Pearson correlation of 0.790 for tactile intensity. The learned bridge also predicts relative changes in exoskeleton configuration from bare hand video. These results demonstrate that human limb coupling can turn exoskeleton measurements into supervision for bare hand video, establishing a learned bridge between human visual demonstrations and a robot oriented manipulation interface.

0.19

DexPort: A Hand-Held Skill Interface for Dexterous Hand Data Collection

cs.RO cs.AIcs.LG ·2026-10-23 ·Amber Xie, Jiawei Fu, Xiaofeng Guo, Carmelo Sferrazza, Guanya Shi +1 more
similarity 0.74
Abstract · Website: https://amberxie88.github.io/dexport/

Collecting high-quality demonstrations remains a central bottleneck for learning dexterous manipulation. Teleoperation records executable robot actions, but it requires a complete robot setup and places the burden of coordinating many finger joints on the operator. Human demonstrations are easier to collect, but their motions must be estimated and retargeted to the robot, and they do not directly provide robot actions. In this paper, we introduce DexPort, a portable data-collection interface for high-DoF robot hands. It uses the same hand hardware for collection and deployment, avoiding a hand embodiment gap, and records both commanded joint targets and measured joint states. Our key observation is that a small set of skills can support a wide range of dexterous tasks. During collection, the operator moves the hand-held interface to specify the robot wrist motion and selects or adjusts skills that coordinate the finger motion. This removes the need to control each joint independently while retaining behaviors such as precise grasping and in-hand manipulation. We collect demonstrations across several real-world tasks and in unstructured environments without a robot arm. We then use behavior cloning to train visuomotor policies directly on the recorded wrist motions and hand commands, without skill labels. We evaluate across 4 tasks: pick-and-place with diverse objects, screwing with in-hand tool use, drawer stowage which requires simultaneous grasp and pulling, and a bimanual scanning task. We collect over 2,500 demonstrations with our portable device, in both laboratory and in-the-wild settings. Across our tasks, we see an improvement from 11% to 64% when using recorded robot commands instead of states, and an improvement from 36% to 78% for task success when using in-the-wild data.

0.40

From Wearable Interfaces to Dexterous Policies: Contact Shifts and Tactile Representations

cs.RO ·2026-10-06 ·Ruitong Tian, Fang Xu, Noah B. Wilson, Xianyao Li, Eric Jing Du
similarity 0.73
Abstract · 8 pages, 6 figures

Unlike conventional teleoperation, wearable interfaces allow operators to collect dexterous demonstrations through their own hand motions while directly interacting with task objects. This direct interaction reduces dependence on the target robot during collection, but it also makes the collection hardware part of the physical process that generates each demonstration. Interface geometry can influence both how a task is performed and what tactile observations are recorded for learning. We study two versions of a DexUMI-family exoskeleton that share the same robot command definition, mapping procedure, and tactile module type but differ in hand-side geometry. The revised interface reduces reported physical demand, improves selected device ratings, enables tactile access in a precision grasp that is mechanically blocked by the baseline, and produces task-dependent changes in recorded contact. Lid twisting primarily exhibits a change in contact location, whereas egg carton opening primarily exhibits a change in contact occurrence. We then train matched policies using either a binary aggregate input or a spatial-plus-force input. On lid twisting and egg carton opening, policies trained on revised-interface demonstrations achieve higher success than those trained on baseline demonstrations, with a significant pooled interface effect. Across these and two additional tasks, USB insertion and soldering tool pick and place, the spatial-plus-force input likewise outperforms binary aggregation. These results show that wearable collection hardware is part of the data-generation process for robot learning. Such interfaces should therefore be evaluated not only through operator experience, but also through the tactile interactions they make recordable and the policy performance their demonstrations support.

0.19

Human2Dex: Dexterous Robot Learning from Wrist-Centric Human Demonstrations

cs.RO ·2026-10-09 ·Jiachen Zhang, Yuanyuan Li, Shaqi Luo
similarity 0.72
Abstract · 8 pages, 6 figures. Project website: https://human2dex.pages.dev/

Collecting dexterous manipulation demonstrations for each robot hand requires repeated task-specific data acquisition. We ask whether one shared corpus of natural human demonstrations can instead serve as a reusable data interface for different dexterous hands, without collecting task demonstrations on each target robot. We present Human2Dex, a wrist-centric human demonstration interface that separates shared human observation and motion semantics from embodiment-specific execution. It aligns observations through local hand-appearance adaptation and a shared 21-point hand representation with consistent structural semantics across human and robot observations. It constructs executable supervision by retargeting fused human hand motion to each target hand, and introduces the Grasp-Pocket Interaction Representation (GPIR) to express tracked objects relative to a hand-centered Functional Grasp Pocket. The corpus is converted into separate training sets for Linker O6 and Wuji, while action labels, normalization, training, and diffusion-policy checkpoints remain hand-specific. Across six real-world tasks, Human2Dex achieves 109/120 (90.8%) successes on Linker O6 and 97/120 (80.8%) on Wuji. Across both hands, Human-Raw achieves 63/240 (26.3%) successes, whereas the complete Human2Dex configuration achieves 206/240 (85.8%). These results support the use of wrist-centric human demonstrations as a reusable interface across calibrated dexterous hands while retaining embodiment-specific policy learning. The project website is publicly available at https://human2dex.pages.dev/.

0.48

CARD: Contact-Anchored Retargeting for Dexterous Manipulation

cs.RO ·2026-10-27 ·Cunxi Dai, Botao He, Francois R Hogan, Wei Pan, Rao Fu +5 more
similarity 0.72
Abstract · Project webpage: https://card-retargeting.github.io/

Humans are dexterous, but traditional data collection paradigms such as teleoperation, kinesthetic teaching, and wearable exoskeletons force humans to act through the robot embodiment, bottlenecking their dexterity. Retargeting can avoid this. However, existing methods purely translate kinematics and ignore the real-world contact dynamics essential for task success. We present CARD: Contact-Anchored Retargeting for Dexterous Manipulation, a simulator and object-free framework that retargets human demonstrations to robot actions by explicitly preserving contact force targets. CARD unifies human data sources including video, motion capture, and tactile gloves via a shared hand--contact representation and generates explicit contact force targets in addition to kinematics. To maintain these contact targets during hardware open-loop replay, CARD also introduces a tactile tracking controller. For video which does not contain an explicit tactile source, we present Vid-HACO, our video-to-contact model that sets a new state of the art. Across our video, glove, motion-capture data and the GRAB dataset, CARD maintains contact on $43$--$78\%$ of contact frames, while kinematic and object-aware retargeting methods maintain contact on $<10\%$ and $22.5\%$ of the frames respectively. Further, integrating our formulation into physics-based retargeting improves strict task success from 12\% to 32\% on GRAB dataset. Finally, we show that our tactile tracker is critical to reproduce demonstrated forces during hardware replay. These results establish that contact preservation via CARD is a scalable interface for transferring human dexterity to robots.

0.39

Weave: Learning Whole-Body Dexterous Loco-Manipulation from Human-Object Interactions

cs.RO cs.AIcs.LG ·2026-09-15 ·Liu Cao, Xingze Wu, Jingzhi Cui, Botian Xu, Mingzhi Pei +2 more
highly cited similarity 0.72
Abstract · 10 pages, 5 figures. Project website: https://xiaohu-art.github.io/Weave/

Learning humanoid-object interaction requires coordinating whole-body balance, locomotion, and dexterous hand contact to control both robot and object motion. Human demonstrations provide examples of coordinated interaction, but transferring these behaviors to humanoid robots requires learning how to establish and maintain effective contacts under different embodiments and dynamics. We present Weave, a unified framework for learning whole-body dexterous humanoid-object interaction from captured human demonstrations. Weave first converts captured human-object interactions into executable robot-object references through contact-aware retargeting and approach-motion completion. At its core is a contact- and geometry-aware policy that jointly commands 29 body joints and 12 actuated finger joints across multiple objects and interaction sequences. Evaluation across nine objects yields a 92.5% success rate on trained interactions and, without any additional training, 65.0% on sequences never seen during training. We additionally release ~9,000 physically executed rollouts spanning ~23 hours, providing robot-object trajectories with contact annotations for downstream interaction-policy learning and physically consistent HOI motion generation. Project website: https://xiaohu-art.github.io/Weave/

0.57

Pre-training Visual Dexterity in Simulation

cs.RO cs.AIcs.CV ·2026-08-16 ·Sarthak Kamat, Adam Rashid, Satvik Sharma, Aseem Doriwala, Chelsea Finn +2 more
code/data similarity 0.71
Abstract · Project page: https://spd.bot

Large-scale pre-training has made robot policy fine-tuning increasingly data-efficient, but this progress has largely been driven by datasets and embodiments built around simple parallel-jaw grippers. Dexterous, multi-fingered hands remain comparatively data-starved because real teleoperation is costly to scale, while human hand video is off-embodiment and requires lossy pose estimation and retargeting. We introduce Simulation Pre-training for Dexterity (SPD), a pre-training framework for dexterous manipulation that uses data entirely collected in simulation. In SPD, humans manipulate virtual objects inside a VR headset, enabling on-embodiment trajectories and robot-free collection. With the help of five operators, we collect 75 hours of multi-task dexterous manipulation over one week, and use it to pre-train a causal transformer on a sequence modeling objective. We study the benefits of simulation pre-training on real-world tasks by fine-tuning on 1-2 hours of physical demonstrations on a 56-DoF bimanual dexterous setup. We find that our approach outperforms training behavior cloning policies from scratch, showing that simulation teleoperation is a viable pre-training source for real-world dexterous manipulation. We perform ablation studies, measuring the benefits of history conditioning and short action chunks for reactive control.

0.20

PanTact: Teaching Whole-Body Dexterity with a Wearable Contact Interface

cs.RO ·2026-10-08 ·Xiaomeng Xu, Han Zhang, Zhian Ruan, Xiaofeng Guo, Jinkun Cao +4 more
similarity 0.71
Abstract

Humanoid robots have many degrees of freedom and contact surfaces, yet most loco-manipulation research restricts manipulation to the hands and avoids other body contacts with the environment. To extend manipulation beyond the hands, we present PanTact, a system that learns humanoid whole-body dexterity, the capability to manipulate with any suitable body surface, directly from robot-free human demonstrations. Our key idea is to use contact as manipulation-centric information that transfers across embodiments. Contact locations and timing specify the interactions needed to accomplish a task, while the robot chooses how to coordinate its body to realize them within its own physical constraints. Specifically, PanTact captures, learns, and executes whole-body contact via: 1) a wearable, robot-free data collection interface that augments egocentric vision and bimanual UMI grippers with whole-body modular contact patches to record body contact locations and states; 2) a visuomotor policy that mitigates the egocentric observation gap and predicts whole-body contact goals; and 3) contact-aware whole-body control formulations that realize active contact goals using suitable robot surfaces. We deploy PanTact on a Unitree G1 humanoid without additional body contact sensors, demonstrating whole-body dexterity involving body support, pushing, sweeping, and load-sharing. Website: https://pantact.github.io

0.23