CS Paper Radar

Rapid Learning of Dexterous In-Hand Pen Writing through Real-Time Jacobian Estimation

Kai Stewart, Yasunori Toshimitsu, Robert K. Katzschmann

cs.RO ·submitted 2026-09-10 16:29 UTC · v1

Abstract

Dexterous in-hand manipulation of a grasped object with an anthropomorphic hand is an unsolved frontier for robot dexterity. The contact-richness and highly dynamic nature of object-hand interactions tend to require extensive modeling or data-collection efforts for learning-based approaches. Modern simulators used for reinforcement learning (RL) cannot fully replicate the required contact complexity, while collecting dexterous demonstrations for imitation learning (IL) remains an open problem. In this research, we present an embodied control approach based on real-time task Jacobian estimation of the combined hand and object system on the physical robot. Using only the CPU on a laptop, the proposed controller begins in-hand pen writing after approximately 18 s of initialization and continues to adapt online, without an analytic hand--object kinematic/contact model, simulation training, or precollected task demonstrations. We demonstrate that the same estimator/controller formulation works on three anthropomorphic robotic hand systems (one physical, two simulated) to show human-like, in-hand articulation of a grasped pen by an embodiment-independent formulation. Sub-millimeter in-plane precision (mean 0.6 mm across runs) is achieved across letters and shapes written in the air and on paper on a physical robot. To our knowledge, this is the first demonstration of an anthropomorphic hand writing arbitrary single-stroke trajectories with a grasped pen through purely in-hand motion, and it showcases an alternative to compute- and data-heavy approaches such as RL and IL for achieving dexterous manipulation through computationally simple and data-efficient algorithms.

Comment
8 pages, 7 figures. Project website an be seen at https://srl-ethz.github.io/rapid-dexterous-writing/

Closest papers

Nearest neighbours by meaning across the whole index.

HiFun: a Hierarchical Framework for Efficient Functional Dexterous Manipulation Learning

cs.RO ·2026-10-14 ·Linyi Huang, Guowei Huai, Weibin Liu, Shulong Jiang, Ping Tan +3 more
code/data similarity 0.80
Abstract

While multi-fingered dexterous robot hands have the potential to provide human-level dexterity, using them for functional manipulation remains difficult because task success depends on precise contact, coordinated arm-hand motion, and reactive recovery from execution errors. Precise contact depends on complex contact dynamics that are difficult to model accurately in simulation, motivating real-world learning. However, real-world demonstrations in the full arm-hand control space are costly and noisy because each trajectory must coordinate arm motion with high-DoF multi-finger contact. Small execution deviations can further cause slipped contact or premature force application, making recovery from off-nominal contact states important for robust execution. To deal with these challenges, we propose HiFun, a hierarchical real-world RL framework for functional dexterous manipulation tasks. Our key insight is to decouple the control complexity into a functional hand skill for precise contact execution and an arm-hand coordination policy for arm control and hand-skill activation. This design enables effective real-time human intervention for reactive recovery learning and efficient data collection with Dynamic Movement Primitive (DMP) augmentation. Across six real-world tasks on two dexterous hands, HiFun achieves 98.3% average success within one hour of online training and remains robust to dynamic disturbances. The project page is available at https://hly-123.github.io/HiFun/.

0.23

From Teleoperation to Long-Horizon Dexterity: Evaluating Visuomotor Skills and Offline Proxies for Dexterous Manipulation

cs.RO cs.AIcs.LGeess.SY ·2026-10-29 ·Ammar N. Abbas, Aayush Jain, Prashanth Viswanath, Nivesh Gadipudi, Giulia Vilone +1 more
similarity 0.77
Abstract · Accepted at CoRL 2026 Workshop

Imitation learning policies are intended to make robotic manipulation robust to variations in object pose, appearance, and environment that challenge pre-programmed motion. However, real-world performance remains difficult to predict, as conventional optimization signals such as validation loss show no consistent relationship with robot success. To identify the design choices that govern real-world performance, 281 imitation-learning policies spanning seven policy families were evaluated in approximately 1,700 real-robot trials of RJ45 connector grasping and insertion using a five-fingered robotic hand. Controlled ablations showed that observation and action representations dominated conventional optimizer and sampling choices. For point-cloud policies, region-of-interest cropping, representation in the robot-base frame, and normalization within the point encoder each improved success by 70-100 percentage points. For the vision-language-action policy, absolute rather than relative action prediction improved insertion success by up to 70 percentage points. Skill decomposition, multi-view perception, and recovery demonstrations were associated with the strongest-performing systems, although their effects were not independently isolated. Of 67 offline metrics evaluated, only five measures of predicted-motion smoothness and directness reliably correlated with insertion success (r = -0.70 to -0.80), and only within a single policy family. These results identify representation choices as key determinants of real-world imitation-learning performance and show that offline metrics can shortlist policies, but cannot replace real-robot evaluation.

0.18

Dexterous Robot Manipulation from Human Demonstrations via Contact-Anchored Retargeting and Residual Policy Learning

cs.RO ·2026-09-21 ·Zihao Yang, Chengyuan Liu, Yu Zhou, Runze Lv, Tianyu Cui +4 more
code/datahighly cited similarity 0.76
Abstract · 16 pages, 6 figures, 5 tables. Technical report. Code: https://github.com/DexGEM-Lab/real2sim2real

Learning dexterous manipulation from demonstrations is bottlenecked by data: the contact forces that determine whether a grasp succeeds are absent from every scalable source of human demonstrations. This paper builds on two observations. First, what survives the change from a human hand to a robot hand is the contact structure of a demonstration - which finger regions touch which object locations, and in what order - rather than its joint motion. Second, physical consistency need not be engineered per task: a single residual reinforcement learning (RL) policy, trained once across diverse demonstrations, can repair kinematic recordings into physically consistent, contact-annotated trajectories, and the same residual formulation restores dynamic feasibility after retargeting. These observations yield a three-stage pipeline that converts human motion-capture recordings into dexterous robot policies with no real-robot training data: physics refinement with a simulated MANO hand recovers contacts and forces, contact-anchored retargeting transfers the demonstrated contact structure through an objective independent of hand morphology, and residual policy learning adapts the result to robot actuation. The pipeline reconstructs 25,454 single-hand trajectories (success 7.3% -> 59.3%) and 25 dual-hand tasks (16.0% -> 62.4%) with one shared policy per setting, transfers one human dataset to four morphologically distinct robot hands (+62.4 pp), and executes four contact-rich bimanual tasks on physical hardware with zero real-robot training data.

0.60

DexTaG: Tactile-as-Guidance in Reinforcement Learning for Dexterous Manipulation

cs.RO ·2026-09-27 ·Han Yang, Yian Wang, Yunlong Song, Zhenjia Xu, Chuang Gan
similarity 0.75
Abstract

Glove-based motion capture is emerging as a scalable approach to collecting dexterous-hand demonstration data. However, due to the kinematic gap between the human and robot hand, the recorded human motions cannot be executed directly on the robot, especially for contact-rich tool-use tasks involving in-hand reorientation. Prior work bridges this gap in simulation through reinforcement learning (RL) or trajectory optimization, but the human contact pattern is hard to preserve under such formulations, often producing unnatural manipulation and unstable functional grasps. These methods also train a separate policy or solve a separate optimization for each reference trajectory, which is inefficient. To solve these problems, we propose DexTaG, a tactile-guided RL framework for dexterous manipulation. During training, tactile signals captured by the glove guide policy search toward the measured human contact pattern, reducing reliance on precise reference geometry for contact supervision. To improve efficiency, we train a single generalizable retargeter jointly on all training trajectories of the same object. The retargeter is further distilled into a tactile-free student controller conditioned on the target object trajectory for real-world deployment. On marker-pen and hammer manipulation tasks, DexTaG learns natural, contact-rich behaviors that baselines with distance-based contact heuristics fail to learn, generalizes to held-out trajectories of the same object and task, and outperforms single-trajectory baselines on OakInk2.

0.19

One Demonstration, Many Objects: Generalizing Manipulation via Local Contact Geometry

cs.RO ·2026-09-01 ·Satvik Sharma, Samrat Sahoo, Huang Huang, Fei-Fei Li, Jiajun Wu +2 more
highly cited similarity 0.75
Abstract

Dexterous manipulation with multi-fingered robot hands promises human-level dexterity, but collecting large-scale dexterous robot hand data remains difficult. Learning from human demonstrations has emerged as a scalable alternative to robot teleoperation, providing strong priors on object interaction and contact strategies. Recent sim-to-real RL methods incorporate such priors, but often (i) omit rewards that explicitly incentivize precise contact, yielding weak real-world performance, and/or (ii) generalize poorly to unseen object instances. We propose DemoMimic (Dexterous Motion Mimic), a policy that manipulates objects by focusing on their geometry local to the contact points. Its contact-centric rewards encourage precise contact and improve sim-to-real consistency, yielding a single real-world policy that transfers across objects of varying shape, scale, mass, and friction wherever local contact structure is preserved. Real-world ablations show that DemoMimic achieves 71% success across 16 objects, four tasks, and two robot-hand embodiments, with the smallest sim-to-real drop compared to baselines.

0.36

Learning Dexterous Manipulation: Hands, Simulators, Training, and Evaluation

cs.RO ·2026-10-24 ·Luai Abuelsamen
survey similarity 0.75
Abstract · 36 pages, 14 figures, 7 tables. Survey of 113 learning-based dexterous manipulation methods, with a comparison of each paper's stated reward…

A dexterous hand can change an object's pose without setting it down. This survey covers 113 learning-based methods that attempt it, the hands they run on, the simulators they train in, and how they report results. The field has largely converged on one recipe: reinforcement learning on privileged state in a GPU simulator, distilled into a vision-only student for transfer to hardware. Almost half the corpus trains that way, nearly all of it in one simulator, whose own successors are barely used. A second and faster-growing branch learns from teleoperated demonstration instead, through vision-language-action models, diffusion policies, and systems whose contribution is the collection rig itself. Published work has tripled since 2022. Grasping remains the largest task family and bimanual coordination the fastest-rising, and almost every experiment runs on one of four hands. What the survey adds comes from reading released code and vendor specifications beside the papers. Eight hands that can be bought or built from published designs appear in no method paper here. Where the depth a hand sinks into the object it holds is reported at all, it is not measured in the physics that produced the motion. Section VII proposes a protocol for the unreported quantities; the body gives the counts behind every claim above.

0.10

DexPort: A Hand-Held Skill Interface for Dexterous Hand Data Collection

cs.RO cs.AIcs.LG ·2026-10-23 ·Amber Xie, Jiawei Fu, Xiaofeng Guo, Carmelo Sferrazza, Guanya Shi +1 more
similarity 0.74
Abstract · Website: https://amberxie88.github.io/dexport/

Collecting high-quality demonstrations remains a central bottleneck for learning dexterous manipulation. Teleoperation records executable robot actions, but it requires a complete robot setup and places the burden of coordinating many finger joints on the operator. Human demonstrations are easier to collect, but their motions must be estimated and retargeted to the robot, and they do not directly provide robot actions. In this paper, we introduce DexPort, a portable data-collection interface for high-DoF robot hands. It uses the same hand hardware for collection and deployment, avoiding a hand embodiment gap, and records both commanded joint targets and measured joint states. Our key observation is that a small set of skills can support a wide range of dexterous tasks. During collection, the operator moves the hand-held interface to specify the robot wrist motion and selects or adjusts skills that coordinate the finger motion. This removes the need to control each joint independently while retaining behaviors such as precise grasping and in-hand manipulation. We collect demonstrations across several real-world tasks and in unstructured environments without a robot arm. We then use behavior cloning to train visuomotor policies directly on the recorded wrist motions and hand commands, without skill labels. We evaluate across 4 tasks: pick-and-place with diverse objects, screwing with in-hand tool use, drawer stowage which requires simultaneous grasp and pulling, and a bimanual scanning task. We collect over 2,500 demonstrations with our portable device, in both laboratory and in-the-wild settings. Across our tasks, we see an improvement from 11% to 64% when using recorded robot commands instead of states, and an improvement from 36% to 78% for task success when using in-the-wild data.

0.40

Contact Imitation Interface: Transferring Dexterous Skills by Showing How Contact Unfolds

cs.RO ·2026-10-29 ·Zhixuan Xu, Yichen Li, Bingchen Wu, Rui Wang, Yiwen Hou +3 more
similarity 0.74
Abstract · 15 pages (8-page main paper and 7-page supplementary material). Project website with code and hardware designs: https://nus-lins-lab.github.…

Robot-free human demonstrations offer a promising route to scaling dexterous manipulation data. The key challenge is to preserve the demonstrator's natural dexterity while producing contact-grounded observations and actions that transfer to robot hands. We present Contact Imitation Interface (CIMI), a framework with contact-grounded demonstration and learning interfaces. The demonstration interface combines shared contact geometry and fingertip RGB views with contact-alignment-first retargeting and reprojection of wider scene views. The learning interface introduces a hierarchical policy in which a contact-surface planner predicts relative contact-surface trajectories and a controller coordinates wrist and finger commands to improve contact alignment. CIMI combines contact-grounded observations, retargeting, and action representations, improving mean final-stage success by at least 50 percentage points over baseline policies across six hand-task pairs on LEAP and Wuji. Hardware designs and software are publicly available.

0.21