CS Paper Radar

PATH: Continuous Target Sensing among Autonomous Cooperative Drones

Heegyeong Kim, Alice James, Avishkar Seth, Endrowednes Kuantama, Jane Williamson, Yimeng Feng, Richard Han

cs.RO ·submitted 2026-09-11 05:24 UTC · v1

Abstract

Continuous target sensing by uncrewed aerial vehicles (UAVs) is constrained by limited flight endurance, motivating the transfer of tracking responsibility between cooperating UAVs. Such a handoff requires the receiver to identify the same physical target currently tracked by the sender despite differences in viewpoint, scale, and target appearance. Existing approaches based on global target localization or appearance-based cross-view association are limited by positioning uncertainty or ambiguous visual features. This paper presents Perspective Alignment \& Tracking Handoff (\textbf{PATH}), a platform-agnostic, geometry-assisted sensing and verification framework for target handoff between two moving UAVs. The sender reconstructs the tracked target as a metric 3D point using RGB-D sensing, while the receiver estimates its relative pose from a fiducial observation and projects the transmitted target point into its own image as a spatial prior for target acquisition. The receiver-generated candidate is then returned to the sender and verified through a cross-view Mutual Agreement Handshake before tracking responsibility is transferred. Real-world UAV experiments show mean relative-position and target-position errors of 0.047~m and 0.030~m, respectively. Under visually ambiguous conditions, PATH achieves 96.0\% frame-level receiver-side target acquisition accuracy, with 2.0\% false-positive and 2.0\% false-negative rates. A sensor-error sensitivity analysis shows that relative-pose uncertainty is the dominant contributor to receiver-view projection error. The implementation operates at video rate with compact inter-UAV communication below 16~kB/s at 60~Hz, demonstrating the feasibility of lightweight geometry-assisted target handoff on resource-constrained UAV platforms.

Closest papers

Nearest neighbours by meaning across the whole index.

Vision-Based Leader-Follower Formation Control for Cooperative UAVs in GPS-Degraded Environments

cs.RO ·2026-09-01 ·Deekshitha Angadi, Naveena Budda, Vikas Agarwal, Rojesh Arunkumar Mulasa, Ravi Killamsetty +2 more
published similarity 0.69
Abstract · This paper has been accepted for publication in the Proceedings of the 2026 IEEE International Conference on AI and Security for Industrial …

Cooperation in multi-UAV systems requires reliable relative perception so that follower vehicles can maintain formation and continue their mission safely even when absolute positioning sensors degrade or fail. This paper presents a vision-based cooperative formation framework running on a follower UAV that uses a front-facing RGB-D camera to detect, track, and localize a leader UAV in real-time. A lightweight YOLO-based detector is trained on a dedicated drone dataset and deployed onboard to predict leader bounding boxes, which are then fused with depth information via a pinhole camera model to estimate the leader's relative pose. These estimates provide a leader-follower position controller and can also be used as a backup when GPS or external localization is unavailable. This framework is implemented as a set of ROS nodes and evaluated in a physics-based multi-UAV simulation built on XTDrone, with sensor noise and communication dropouts. We evaluate detection accuracy, runtime, and formation-keeping error under nominal conditions and under simulated failures of the positioning sensors. The results show that the proposed framework maintains stable leader-follower formations with reasonable computational cost and provides a practical basis for extending vision-based cooperative formation control to real-world multi-UAV systems.

0.21

AirAlign: Geometry-Aware Relative Pose Alignment for UAV Last-Meter Navigation

cs.CV ·2026-08-22 ·Jinyi Zhou, Shuo Feng, Yufei Wu, Piji Li
similarity 0.69
Abstract

Unmanned aerial vehicle (UAV) navigation in modern low-altitude environments requires more accurate pose alignment in the final approach stage for target information acquisition or manipulation, making "last-meter" navigation increasingly important. However, severe viewpoint and appearance variations make this task challenging. To tackle this problem, we propose AirAlign, a framework for RGB-only image-pair relative pose alignment for UAVs. AirAlign uses a pretrained visual geometry reconstruction model as the backbone to extract geometry-aware features from source-target image pairs. In addition, to better utilize the limited training data, we split the training set into multiple scene-disjoint folds for unseen cross-validation and model selection. During inference, the predictions of the selected models are averaged to form the ensemble output of the overall framework. Experiments on the PairUAV challenge at the ACMMM 2026 Workshop on UAVs in Multimedia demonstrate the effectiveness and robustness of our method, while comprehensive ablation studies validate the contribution of each component.

0.47

JitTrack: Onboard Multi-Object Tracking Against Viewpoint Jitter for Agile UAVs

cs.RO ·2026-08-11 ·Yachun Shan, Feitian Zhang
similarity 0.66
Abstract · 9 pages, 7 figures. Submitted to IEEE Robotics and Automation Letters

Multi-object tracking (MOT) onboard agile unmanned aerial vehicles (UAVs) remains challenging due to severe viewpoint jitter induced by camera ego-motion. Rapid attitude changes during flight often lead to significant target displacement across frames, causing inaccurate target association and degraded tracking performance. Existing UAV MOT methods are primarily evaluated on offline benchmarks and seldom address the practical requirements of real-world onboard deployment, including robustness to camera motion and active target following. To address these challenges, we propose JitTrack, an active onboard multi-object tracking framework that accommodates drone dynamics and camera ego-motion. Built upon a query-based transformer tracker, JitTrack introduces semantic refinement to improve the detection of emerging targets, motion-aware query rectification to compensate for target misalignment caused by viewpoint jitter, and a motion-inspired denoising training strategy that simulates camera motion patterns for robust supervision. Furthermore, we develop a perception-planning-control closed-loop tracking pipeline for real-world deployment, enabling collision-free and physically feasible target following on agile UAVs. Extensive experiments on public UAV MOT benchmarks demonstrate consistent improvements over the baseline method, while real-world flight experiments validate the effectiveness and practicality of JitTrack for robust onboard visual tracking under viewpoint jitter.

0.12

Robust Active-Perception Control for Global-State-Free Aerial-Ground Cooperation

cs.RO ·2026-09-22 ·Mingxuan Zhang, Jiajun Yu, Baozhe Zhang, Pengxiang Zhou, Wentao Liu +3 more
similarity 0.65
Abstract

Aerial-ground cooperation requires real-time UAV--UGV relative-state information. Instead of maintaining global estimates for both robots, direct control in a UGV-attached non-inertial frame avoids reliance on global localization. Vision-based relative pose estimation with a passive marker offers a low-cost and effective solution. However, a fixed camera may lose sight of the moving UGV when the required UAV attitude conflicts with the field-of-view (FOV) constraint. To address this, we propose COPA, a robust active-perception framework for global-state-free aerial-ground cooperation. We use a single-axis gimbal to decouple the camera optical axis from the UAV pitch attitude. We derive an active-perception model that relates UAV motion, gimbal angle, and UGV motion to the target image-plane state.A Temporal Convolutional Network (TCN) predicts short-horizon UGV acceleration and angular velocity from recent motion history without global-state measurements. The model predictive control (MPC) uses these predictions to jointly optimize UAV and gimbal control. Simulations show that COPA maintains continuous target visibility, while ablation studies confirm that the TCN reduces peak errors during UGV motion transitions. Real-world experiments with UGV accelerations up to 3m/s^2 and yaw rates up to 1.0rad/s demonstrate robust tracking.

0.15

Towards Agile Vision-Based Multi-UAV Flight: Revisiting State Estimation

cs.RO ·2026-09-30 ·Michal Pliska, Matouš Vrba, Ondřej Víta, Martin Jiroušek, Viktor Walter +1 more
publishedbenchmark similarity 0.65
Abstract · This work has been accepted to the IEEE for possible publication (IROS 2026)

Agile multi-UAV flight requires accurate and low-latency onboard estimation of the kinematic states of neighboring UAVs for collision avoidance, motion coordination, etc. Most vision-based approaches rely on position-only measurements, inferring velocity and acceleration indirectly from displacement. We show that this introduces a fixed structural delay in the estimation of higher-order states, which limits the achievable agility. To address this, we propose to integrate tilt measurements, provided by a state-of-the-art visual detector, which inform about the thrust direction of co-planar multirotor UAVs. We benchmark four position-only and five pose-aware estimators, including a novel formulation of a linear thrust-constraining Kalman filter, on two real-world and one high-fidelity photorealistic simulated dataset over different levels of agility (3-21 m/s^2). In our setup, pose-aware estimation consistently reduces the average velocity and acceleration estimation errors by 40% and 57% across the three datasets with the proposed KF formulation outperforming the other estimators. Position-only filters exhibit a constant ~300 ms delay in acceleration step response independent of agility, whereas the tilt-constrained estimators operate near the physical response limit given by the camera frame-rate by observing the change in thrust direction before the displacement accumulates. In a closed-loop leader-follower simulated experiment with NMPC control, position-only estimation of the leader's state fails to facilitate stable hovering of the follower, while the proposed estimator enables tracking of lateral maneuvers exceeding 2g of acceleration.

0.26

DARP: A Calibrated Dual-Arm RGB-D-IR Dataset for Multi-View Robotic Perception

cs.RO cs.CV ·2026-08-31 ·Manish Kansana, Mohammed Yusuf Mujawar, Sudip Mittal, Shahram Rahimi, Noorbakhsh Amiri Golilarz
similarity 0.65
Abstract

Robotic perception from a single viewpoint is often limited by self-occlusion and incomplete surface visibility. This paper presents DARP(Dual-Arm Robotic Perception) https://doi.org/10.21227/rmv3-be47, a calibrated dual-arm RGB-D-IR dataset for object-centered robotic perception using two independently moving eye-in-hand manipulators positioned on opposite sides of a shared tabletop workspace. Each arm carries an Intel RealSense sensor that continuously records RGB, depth, and stereo infrared data while synchronized robot joint states are logged for pose recovery. Objects are placed without fixed poses or marked locations, and the acquisition procedure performs automatic localization, cross-arm confirmation, adaptive viewpoint generation, and continuous multimodal recording. DARP contains ten unique tabletop objects and preserves the original sensor recordings, robot-state logs, object-level metadata, and calibration information required to reconstruct camera trajectories in a shared metric frame. To evaluate the geometric consistency of the acquisition, we implement a deterministic multi-view fusion pipeline that converts calibrated RGB-D observations into complementary partial point clouds and measured surface meshes without using learned or generative completion methods. Evaluation on 224 held-out RGB-D keyframes comprising 1,563,466 three-dimensional query points yields a median point-to-mesh distance of 2.13~mm and an RMSE of 4.04~mm, with 96.56\% of points within 10~mm of the measured-surface mesh. DARP is intended as a reusable resource for multi-view reconstruction, collaborative robotic perception, multimodal fusion, active perception, and future learning-based reasoning over partial object observations.

0.26

CAPTURER: A Dexterous Aerial Manipulator for Dynamic and Precise Grasping across Diverse Environments

cs.RO ·2026-10-29 ·Meng Wang, Jindou Jia, Sicheng Zhou, Zeshuai Chen, Kexin Guo +2 more
similarity 0.64
Abstract

As a representative form of embodied robotic interaction, aerial grasping requires close coordination between the aerial platform and manipulator. Most existing systems perform aerial grasping with static or slowly moving targets under fixed scenarios. Dynamic and precise grasping across different conditions introduces additional challenges, including target motion, localization drift, dynamic coupling, and external disturbances. In this work, we present CAPTURER, a dexterous aerial manipulator for centimeter-level grasping across diverse environments. To achieve the challenging goal, we first develop an onboard perception system for state estimation and target detection. Drift correction and global pose transformation are introduced to improve target localization during flight. A cooperative motion planner is proposed to coordinate the mobility of the aerial platform with the dexterity of the manipulator according to the relative target state. To maintain grasping accuracy under disturbances, we design a disturbance-rejection controller to compensate for dynamic coupling, model uncertainty, and external disturbances. The capability of CAPTURER is validated through indoor and outdoor experiments with both static and moving targets. The results demonstrate that CAPTURER achieves centimeter-level grasping accuracy for a marker pen measuring only 1.5 cm in diameter at flight speeds exceeding 1.5 m/s.

0.24

A Heterogeneous UAV UGV Methodology for Aerial Tracking of Mini Autonomous Cars

cs.RO ·2026-09-21 ·Santiago Fernandez, Angel da Silva, Hiago Sodre, Pablo Moraes, Bruna Gutterres +1 more
published similarity 0.64
Abstract · This paper was accepted at the Latin American Robotics Symposium LARS 2026

Aerial tracking of autonomous ground vehicles can provide useful situational awareness in environments where fixed external perception infrastructure is unavailable. However, visual-only tracking from an unmanned aerial vehicle (UAV) is limited by camera field of view, viewpoint changes, occlusions, and temporary loss of target visibility. This paper presents a heterogeneous UAV--UGV methodology for aerial tracking of small-scale autonomous ground vehicles in simulation. The system is implemented in ROS~2 and Gazebo Sim using a Tello-like UAV equipped with a front-facing RGB camera and multiple LIMO-like unmanned ground vehicles (UGVs). Three approaches are evaluated: a training-free color-marker baseline, a YOLO-based visual baseline, and a proposed UAV--UGV fusion method. The proposed method uses the same visual detector as the YOLO baseline, but combines visual detections with UGV state information to maintain the target estimate during visual gaps. The methods are evaluated across four scenarios: single-car tracking, crossing trajectories, occlusion, and UAV-assisted awareness. Results over 600 simulation runs show that the proposed fusion method achieves nearly continuous track coverage across all scenarios while reducing localization error relative to the YOLO baseline. Compared with the visual-only YOLO approach, the fusion method reduces RMSE by 37.3\%, 64.2\%, 62.6\%, and 61.8\% in the four evaluated scenarios, respectively. The method also enables conflict-awareness lead times of 10.20~s in the crossing scenario and 9.07~s in the UAV-assisted awareness scenario. These results indicate that heterogeneous UAV--UGV fusion can improve aerial tracking continuity and robustness when visual observations are intermittent.

0.22