CS Paper Radar

Hybrid Monitoring for Early Fault Detection in Cloud-Native 5G Systems

Anton Andersson, Sai Akshara Naineni, Mats Jansborg, Yixing Zhang, Romaric Duvignau

cs.NI cs.DC ·submitted 2026-09-11 09:53 UTC · v1

Abstract

This paper presents the design implementation and evaluation of NetMon a hybrid network monitoring system designed for Kubernetes-based 5G packet core deployments specifically evaluated on Ericssons Access and Mobility Management Function AMF clusters NetMon combines eBPF-based passive kernel-level traffic observation with active TCP probing and centralized correlation to detect and localize network degradation within seconds The evaluation results demonstrate that the system detects faults as subtle as 10ms of added latency or 5 packet loss correctly attributes them to the affected infrastructure component and maintains this capability under application loads up to 50 simulated UE load The total resource overhead of 34 millicores CPU and 45 MiB memory per pod suggests that the approach is promising for further validation without impacting the monitored workload The hybrid approach addresses a gap in existing monitoring tools standard health checks cannot detect partial degradation scrape-based systems introduce detection delays measured in tens of seconds and purely passive tools cannot verify idle network paths By combining these complementary techniques and centralizing the analysis the system provides the early detection and fault localization capabilities required for maintaining service quality in cloud-native 5G infrastructure.

Closest papers

Nearest neighbours by meaning across the whole index.

A Dynamic UPF Fault Recovery Mechanism for Enhanced Resilience in 5G Core Networks

cs.NI ·2026-10-02 ·Shirin Behnaminia, Pardis Yavari, Zeinab Zali, Mohammad Reza Heidarpour
similarity 0.68
Abstract

Ensuring fault tolerance in the User Plane Function is essential to maintain service continuity in 5G networks, particularly as latency-sensitive applications become more prevalent. This paper presents a novel mechanism for dynamic UPF failure detection and recovery within an OpenAirInterface-based 5G core environment. The approach introduces an application-layer session restoration mechanism to ensure service continuity and minimize disruptions during UPF failures. Experimental results demonstrate that the proposed mechanism reduces UPF downtime while maintaining low packet loss and enabling rapid service recovery. In tests with TCP and UDP traffic, connectivity was restored within a few seconds, minimizing service degradation. Furthermore, our failure-aware UPF selection mechanism improves long-term system resilience by considering recent failure history. The results highlight the effectiveness of our lightweight framework in improving the overall reliability of 5G networks, making it a valuable contribution to network robustness.

0.16

Characterizing the eBPF-Based Data Plane for Multi-ClusterKubernetes: A Systematic Evaluation of Cilium Cluster Meshand KVStoreMesh

cs.NI ·2026-09-28 ·Simhadri Podala Narasimha
published similarity 0.58
Abstract · 10 pages,3 figures

Kubernetes deployments increasingly span multiple clusters for reasons of scale, fault isolation, regulatory boundaries, and heterogeneous hardware placement, including GPU-dense clusters dedicated to AI and HPC workloads. Cilium Cluster Mesh, built on extended Berkeley Packet Filter (eBPF) technology, has emerged as a widely deployed mechanism for connecting such clusters into a single logical network without a dedicated multi-cluster gateway. Despite its adoption, the academic literature contains no systematic, reproducible evaluation of the eBPF-based multi-cluster data plane itself: existing work either benchmarks eBPF against iptables within a single cluster, or applies eBPF to cross-cluster monitoring rather than forwarding and identity propagation. The most detailed scale data available - a report of a clustermesh-apiserver failing under load at approximately 45,000 nodes across 256 clusters - comes from an industry engineering blog rather than a peer-reviewed source. This paper proposes a methodology to close that gap. We define five research questions covering latency, throughput, control-plane limits, churn, and GPU/RDMA sensitivity, and describe a testbed and eBPF-level instrumentation design. Lacking a live multi-cluster testbed for this submission, we report results from a calibrated analytical simulation of control-plane architectures fit to the production data point. These results are presented as falsifiable predictions intended for validation once the testbed is complete. This paper provides the motivation, experimental design, and preliminary simulation results to serve as a template for a full empirical study.

0.35

An Availability Management Framework for Microservice-Based Safety-Critical CIoT Systems: Architecture and End-to-End Evaluation

cs.NI ·2026-10-09 ·Hassaan Siddiqui, Ferhat Khendek
similarity 0.58
Abstract · 16 pages

Safety-critical Cellular Internet of Things (CIoT) systems increasingly rely on microservice architectures orchestrated across heterogeneous edge and cloud platforms. Although this paradigm improves modularity and scalability, the fault-tolerance mechanisms of contemporary orchestration platforms remain predominantly reactive, i.e., failed components are restarted or rescheduled only after an outage has already occurred. Such recovery can produce multi-second End to End Service Outage Time (E2E SOT), which can grow further under container restart backoff. This paper proposes an Availability Management Framework (AMF), a generic monitor-predict-recover loop that complements reactive recovery with machine learning-based anomaly detection and make-before-break switchover to a standby replica. Candidate ML models are evaluated offline under three protocols, including a change of operating regime, in order to select a model for live deployment. AMF is instantiated and evaluated on a three-tier tele-operated driving (ToD) testbed under a staged resource-exhaustion scenario. Relative to Kubernetes-only recovery, AMF completes switchover during the anomaly window, reduces E2E SOT, and avoids the tens-of-seconds outages associated with repeated in-place restarts under backoff. On this non-real-time testbed, residual E2E SOT lies inside healthy-path jitter and is therefore limited by path timing rather than by lateness of the recovery decision. The paper whows that coupling a validated ML based anomaly detector with proactive switchover can remove restart- and backoff-dominated outage from a critical path.

0.25

Island-Ready Communication Networks: Connectivity Monitoring and State Synchronization for 5G Crisis Connectivity at the Edge

cs.NI ·2026-10-12 ·Leon Janzen, Maria Koch, Matthias Hollick
code/data similarity 0.58
Abstract

Island-ready 5G deployments provide edge connectivity for isolated regions in crisis scenarios by switching to island operation when they are cut off from the global Internet. This work addresses open research challenges that hinder the practical realization of island readiness, with a focus on the required state synchronization and connectivity monitoring functionality. As a proof of concept and for performance evaluation, we integrate our solutions in open-source projects and emulate a country-wide 5G communication network with real-world cellular traffic. Our evaluation studies the switching latency of transitions to island operation, showing that most of the transition delay stems from the access network reconfiguration. We study the synchronization overhead of a highly distributed core network, finding that the synchronization traffic grows faster than linearly with the number of 5G cores, reaching peak synchronization data rates of 9.36MB/s for a deployment of 50 cores.

0.36

Hierarchical Security Monitoring for Edge-IoT: A Formal Methods Approach

cs.CR cs.LOcs.SE ·2026-10-07 ·Nikolaos Kekatos, Marinelio Chintri, Panagiotis Katsaros, Alexios Lekidis, Tom Nianios +2 more
publishedhighly cited similarity 0.57
Abstract · 7 pages, 1 figure, 2 tables. Accepted at the 2026 IEEE International Conference on Cyber Security and Resilience (IEEE CSR 2026)

Cyber resiliency in edge-IoT deployments is fundamentally an economic problem: detection must keep critical processes operating under attack, but defender resources (compute, bandwidth, operator attention) are bounded. Centralised cloud monitoring offers expressive cross-device detection at prohibitive bandwidth cost; purely edge-local monitoring is cheap but blind to coordinated multi-device attacks where the asymmetric balance favours the attacker. We propose a lightweight hierarchical security-monitoring framework, built on formal runtime-verification methods, that occupies the practical middle ground at quantified cost. Each edge device runs a lightweight TeSSLa stream specification (size, payload validity, rate, and timestamp-drift predicates) that emits a four-valued verdict per aggregation window at sub-microsecond per-event cost; the gateway runs a parametric first-order MonPoly monitor over the per-device verdict streams at microsecond-scale per-verdict cost. The edge-to-gateway uplink carries roughly one Boolean per aggregation window per node, orders of magnitude smaller than the raw packet stream. The gateway tier detects coordinated attack patterns that no single-node monitor can see, shifting the asymmetric cost balance toward the defender. Every alert carries a witness set naming the device, the monitor tier, and the predicate that fired, providing an auditable record of the decision. We evaluate the framework on a container-host testbed spanning nominal and attacker nodes across four attack classes (buffer overflow, time spoofing, denial-of-service, and mixed advanced-persistent-threat patterns), and describe the edge- and gateway-tier specifications together with the cost-versus-coverage trade-off as monitor levels are added.

0.56

Jamming Detection in 5G/6G Networks: From O-RAN Concept to OCUDU Deployment

cs.NI ·2026-09-16 ·Marcin Hoffmann, Lukasz Kulacz, Osama Baldo, Marcin Pakula, Balaji Raghothaman
publishedcode/data similarity 0.57
Abstract · Accepted for presentation and publication in proceedings of IEEE MILCOM 2026 conference

RF jamming poses a severe threat to 5G/6G networks, increasing packet latency being especially disruption to mission-critical URLLC services. This paper introduces a proactive Jamming Detection xApp (JD-xApp) for the Open RAN architecture that detects attacks by monitoring the moving-average Block Error Rate (BLER) via the E2 interface. Upon detection, the algorithm overrides standard link adaptation, enforcing a robust upper ceiling on the Modulation and Coding Scheme (MCS) to stabilize latency. To counter O-RAN platform adoption challenges, we transition the framework to an open-source Centralized Unit/Distributed Unit implementation (OCUDU). Evaluated with high-end Keysight lab equipment including the UXM 5G Wireless Test Platform and the PROPSIM F64 channel emulator, the JD-xApp reduces the expected number of packet retransmission attempts by about 67.3%. Finally, the system's feasibility is validated via over-the-air deployment using the POWDER lab infrastructure.

0.62

A Kubernetes-Native Request Router for Quality-Aware Inference Serving in the Computing Continuum

cs.DC ·2026-09-17 ·Ignjat Karanovic, Pantelis A. Frangoudis, Ivan Čilić, Ivana Podnar Žarko, Schahram Dustdar
similarity 0.57
Abstract

We introduce Adaptive Score-based Routing Balancer (ASRB), a dynamic, score-based request routing mechanism for Kubernetes-based service deployments over the computing continuum. ASRB jointly considers infrastructure-level information, response time measurements, and application-level quality indicators, with a particular focus on serving Machine Learning (ML) workloads. For these workloads, ASRB balances requests over service instances deployed in the continuum, following service provider-defined policies encoded as weighted combinations of QoS criteria to flexibly address latency-accuracy trade-offs. To drive routing decisions and swiftly adapt to changes in the operating environment, ASRB monitors a range of runtime metrics across multiple system layers. To deal with the associated monitoring overhead, particularly important for large-scale deployments, it selectively and adaptively controls monitoring intensity without sacrificing on routing quality. ASRB is implemented without requiring any modifications to Kubernetes, making it straightforward to deploy and operate in existing cluster environments. Our testbed experiments demonstrate the versatility of ASRB: When tuned for latency reduction, it achieves at least 10 ms lower mean response time compared with latency-oriented state-of-the-art routing mechanisms, while it achieves higher accuracy when this is prioritized through specific configurations, thus enabling flexible and operator-controllable trade-offs. At the same time, it attains reduced failure rates, higher responsiveness to changes in the operating environment, and up to ~70% less monitoring cost than relevant state-of-the-art solutions, at the potential expense of only a modest latency penalty in some configurations.

0.28

ONDT: A Modular and Virtualized O-RAN Digital Twin for xApp/rApp Closed-Loop Experimentatio

cs.NI ·2026-10-06 ·Miguel Catalan-Cid, Joan Josep Aleixendri, August Betzler, George Oikonomou, Lydia Ntzogani +1 more
published similarity 0.56
Abstract

Open Radio Access Network (O-RAN) architectures extend programmability in next-generation cellular networks through Near-Real-Time and Non-Real-Time RAN Intelligent Controllers (RICs), enabling AI/ML-driven xApps and rApps to optimize network behavior dynamically. However, validating automated closed-loop control algorithms in live environments presents significant operational risks and deployment costs. To address this challenge, this paper introduces the O-RAN Digital Twin (ONDT), a modular, virtualized, and cloud-native experimentation framework developed as a 6G enabler within the SNS SUNRISE-6G project. We present the ONDT architecture and its end-to-end experimentation workflows, showing how the framework automates O-RAN-compliant rApp/xApp onboarding, RAN scenario configuration and initialization, Key Performance Metric (KPM) collection, and closed-loop control validation. Experimental validation using Juniper RIC platforms and the Keysight RICtest emulation framework demonstrates ONDT ability to provide an isolated and reproducible environment for KPM monitoring, cell ON/OFF control, automated dataset generation, and rApp/xApp validation.

0.35