CS Paper Radar

Very Exciting: Zero-Shot Model Predictive Control of Buildings via Excitation-Based Generalized Transfer Learning Models

Fabian Raisch, Felix Koch, Zack Xuereb Conti, Christoph Goebel, Benjamin Tischler

eess.SY cs.LG ·submitted 2026-09-11 13:42 UTC · v2

Abstract

The widespread adoption of data-driven, energy-efficient model predictive control (MPC) in buildings remains hindered by substantial effort to collect data and train models for individual buildings. Transfer learning (TL) has consequently gained increasing attention for target building modeling, as it reduces data requirements and modeling effort by reusing pretrained source models. However, these TL models are typically evaluated only on prediction accuracy in the target, without testing downstream control performance. To address this gap, we apply a state-of-the-art TL approach - pretraining a generalized model on multiple source buildings using standard operational data - within an MPC setup in a target building. We show that this approach is insufficient to achieve satisfactory control performance. As a solution, we introduce generalized models pretrained on excitation-based operational source data - purposefully probed inputs that explore the building's state-action space. For evaluation, we apply the generalized models via zero-shot (i.e., without fine-tuning) to 32 simulated target buildings and assess MPC performance. Our results show that excitation-based generalized models achieve the strongest control performance among all benchmarks, outperforming an online linear model-based MPC and a PI controller by 6.4% and 36.9%, respectively. By combining strong control performance with the ability to generalize across multiple buildings, without requiring any target-specific data, our approach reduces MPC setup cost and simplifies its widespread deployment in the building sector.

Comment
currently under review

Closest papers

Nearest neighbours by meaning across the whole index.

Time-series Foundation Models for Predictive Control: The Role of Excitation

cs.LG eess.SY ·2026-10-05 ·Mazen Amria, Jasper Hoffmann, Philipp Bordne, Anna Rothenhäusler, Lilli Frison +3 more
published similarity 0.67
Abstract · Accepted at the TS-LIMITS Workshop at NeurIPS 2026

Deploying model predictive control (MPC) requires constructing or identifying a predictive model for each target system. Time-series foundation models (TSFMs) offer an attractive option thanks to strong zero-shot forecasting capabilities across systems. However, low forecast error does not guarantee that a TSFM captures the system's response to the alternative actions considered by the controller. We study this gap using residential heat-pump control as a test bed, measuring the agreement between predicted and ground-truth effects of control interventions. Importantly, we find that TSFMs can recover the system's input-response relationship when the context contains sufficient independent control excitation. Common fine-tuning pipelines and feature smoothing reduce, but do not eliminate, the need for in-context excitation. Our results indicate that current TSFMs used for predictive control require sufficiently informative control variation in the inference context. Initial closed-loop results show promise for shorter context windows.

0.36

The Smart Buildings Challenge: Learning Foundation Models for Real-World Optimization at Scale

cs.AI ·2026-10-13 ·Judah Goldfeder, Ayush Rai, Philippe M. Wyder, Na Li, Victoria Dean +9 more
similarity 0.66
Abstract · This is for a Neurips 2026 competition

Buildings cause nearly 40\% of carbon emissions in the US. Of total building emissions, HVAC systems are responsible for approximately 40-60\% and account for 15\% of global energy consumption. Despite advances in artificial intelligence, most buildings still operate as inefficiently as they did decades ago. Building optimization, perhaps more so than any other optimization problem, has enormous potential for Machine Learning (ML) driven impact on climate change, in both the short and long term. One of the biggest obstacles for building optimization is the lack of policy transfer. Most building control systems, whether simulation or learning based, don't generalize: they only work well for the building they were developed for, but not for other buildings. To solve this problem, we propose a challenge for the development of building foundation models that easily adapt to new buildings with minimal configuration and thereby enable building optimization to scale across the globe. Participants will build control policies on a set of simulated buildings, and have their policies evaluated on an unseen set of buildings. The buildings vary in size, layout, weather, material properties, and HVAC system. Successful outcomes from this initiative promise a massive leap forward in global sustainability efforts and demonstrate the great potential of ML to combat climate change.

0.33

Transfer Meta-Learning for State Space Autoencoders

eess.SY ·2026-10-22 ·Stefano De Carli, Daniele Masti, Davide Previtali, Mirko Mazzoleni
similarity 0.64
Abstract · 8 pages, 4 figures. Submitted to IFAC for possible publication

Nonlinear system identification often requires costly experimental campaigns and separate model fitting for each different instance (target system) of a given system family. To reduce this burden, meta-learning approaches reuse information acquired across related systems. In particular, in-context meta-learning enables zero-shot prediction from a brief target system context (i.e., a short input-output trajectory), but generally yields large black-box sequence predictors without exposing an explicit state space model. Conversely, compact structured state space models are suitable for simulation, estimation, and control, but are usually fitted or adapted separately for each target system. To bridge this gap, we introduce a transfer meta-learning extension of state space autoencoders. The method reuses a pretrained encoder, whose weights remain fixed, to extract a compact representation of the target system from its context. An affine parameterization maps this representation to the parameters of a compact neural state space model without target-specific adaptation; the resulting model contains orders of magnitude fewer parameters than the reference in-context predictors from the literature. We evaluate zero-shot prediction and simulation performance on held-out system instances from Buck-Boost converter and Bouc-Wen oscillator system families, comparing performance against individually fitted baseline models.

0.12

Generalizing HVAC Control With Domain Randomized Reinforcement Learning

cs.LG ·2026-09-05 ·Pablo Boitel, Kun Zhang
published similarity 0.63
Abstract · 4 pages, 5 figures. Short paper published in ACM Sustainability Week Companion '26

Deploying advanced HVAC (Heating, Ventilation and Air Conditioning) controllers at scale remains difficult because performance often depends on accurate building models or per-site retuning. We propose NOMAD-RL (Neural Online Meta-Adaptation for Dynamics), a general-purpose Reinforcement Learning (RL) controller designed to transfer across heterogeneous thermal zones through a universal, non-invasive thermostat interface. The controller acts on temperature setpoints from zone measurements and forecasts, while a recurrent policy supports online adaptation under partial observability. Our main contribution is an adaptive domain randomization scheme based on physics-informed normalizing flows, which models correlated and multimodal distributions of thermal-zone parameters while maintaining physical plausibility and controllability. This produces a realistic and progressively adaptive training curriculum that improves transfer across buildings. We evaluate NOMAD-RL against a constant-setpoint PID controller, RL without domain randomization, and MPC in single- and multi-zone settings. NOMAD-RL consistently outperforms the PID and non-randomized RL baselines, and approaches the performance of a well-tuned MPC, especially in the more challenging multi-zone case. These results highlight the potential of adaptive, physics-informed domain randomization for robust and transferable HVAC control.

0.29

Structured Representation Learning for Behavior Cloning: How can we learn to safely control a nuclear power plant?

cs.LG ·2026-10-05 ·Perceval Beja-Battais, Alain Grosset{ê}te, Nicolas Vayatis
published similarity 0.61
Abstract

Learned models for industrial control are usually judged by aggregate accuracy, but accuracy at the component level does not guarantee safety once it is embedded in the system it is meant to serve. We study this gap on a behavior-cloning task: imitating an expert Nonlinear Model Predictive Control (NMPC) policy for load-following of a Pressurized Water Reactor (PWR), an industrial system with tight safety constraints. We propose a structured architecture encoding variables from each timescale into separate latent spaces, reflecting the physical decomposition of the system, before training a controller to imitate the expert on the product latent space. On long-horizon rollouts, separated embeddings improve both accuracy and feasibility compared with a shared-embedding baseline. Sensitivity analysis further shows that our model yields interpretable representations aligned with the system's physics. However, standalone deployment still leaves several percent of trajectories infeasible regardless of the architecture. Using our method to warmstart the NMPC optimizer rather than acting standalone, we recover full feasibility and near-optimal cost while still cutting computation time by $\sim$15% relative to the expert controller, and even more for abrupt operating changes.

0.60

ZERITH V2.5: From Predictive Power to Policy Learnability

cs.RO ·2026-11-18 ·Chenxi Han, Ruby, Epoch, Orion, Luke +16 more
code/data similarity 0.60
Abstract · 50 pages, 17 figures, 22 tables. Project page: https://www.zerith.com/blog/zerith-2-5/

When humans learn to manipulate an unfamiliar object, they may already be able to anticipate how its state will change while still being unable to control it skillfully. This gap between prediction and control motivates us to study how the priors acquired by video generation models can be used effectively by an action policy. We present ZERITH V2.5, a video-action model (VAM) in which the action policy reads intermediate features of a video generation model, and use it to study, under fixed demonstrations and a fixed total number of updates, what kind of predictive training improves subsequent action learning. We find that the way video predictive training is supervised affects subsequent action learning. In our experiments, adapting at many noise levels yields a large gain, while adapting only at the noise level used at deployment yields none. Weight-transfer experiments further show that the gain stays with the adapted weights when they remain in the video generation model and disappears when they are used only to initialize the action policy. Initial loss and gradient measurements at the start of joint training indicate that target-domain predictive training gives the video model a better starting state, making subsequent joint learning of prediction and action easier. Under matched data and training budgets, predictive adaptation improves control. We evaluate the complete policy on LIBERO, LIBERO-Plus, Meta-World MT50, and real-robot tasks.

0.40

Learning Robot Behavior Priors from Non-Robotic Synthetic Data

cs.RO cs.LG ·2026-10-22 ·Mateusz Odrowaz-Sypniewski, Michael Amir, Jasmine Bayrooti, Ajay Shankar, Amanda Prorok
similarity 0.60
Abstract

Real robot data, rich across tasks and morphologies, is often treated as the bottleneck for training robot learning models, including embodied foundation models that aim for zero-shot physical transfer. In this paper, we investigate the degree to which such models can acquire necessary structure using data from systems without embodiment. To this end, we test if inexpensive, procedurally generated synthetic data can yield useful priors before a model observes any real-world behavior. We study this through robot action prediction, a natural pretraining objective and a direct test of whether structure learned from arbitrary synthetic tasks transfers to embodied settings. We introduce three data generation pipelines that model mathematical abstractions of robotic control, and use them as pretraining priors for a Transformer. We demonstrate that a model trained purely on this non-robotic data attains non-trivial zero-shot prediction performance on unseen physical robot tasks via an in-context learning mechanism, and that our specialized control priors notably improve upon generic causal priors. We also compare against a compute-matched baseline trained on real robot data, and find that it outperforms our model but only on the datasets it was trained on. These findings suggest that procedurally generated, mathematical abstractions can yield useful robotic priors, offering a potential complement to expensive embodied data collection.

0.20

ADAPT: Physics-Aware Diffusion-based World Models for Adaptive Predictive Transferable HVAC Control

cs.AI ·2026-08-20 ·Xu Yang, Kailai Sun, Dianyu Zhong, Qianchuan Zhao
similarity 0.59
Abstract

Buildings account for roughly one-third of global energy consumption and CO$_2$ emissions. Optimizing indoor climate systems plays a critical role for urban climate mitigation aligned with UN Sustainable Development Goals 11 and 13. However, indoor delayed thermodynamic responses and partial observability severely hinder existing methods, which are primarily limited by implicit thermal inertia, occupancy dynamic prediction, and cumulative prediction errors, especially for out-of-distribution environments. In practice, these challenges are further exacerbated by the high cost and privacy burden of dense indoor sensing, forcing operators to collect only limited data in a single operating regime while expecting controllers to generalize reliably across unseen seasons and climate regions. To address this problem, we propose ADAPT, a physics-aware conditional diffusion indoor environmental world model for HVAC control. The model predicts a short-horizon held-action thermal baseline to capture the latent thermal inertia of the buildings. The diffusion backbone utilizes the robustness of generative models, while a learnable multi-zone heat-balance regularizer constrains generated trajectories to satisfy transferable building thermodynamics without requiring known building geometry or manually calibrated thermal parameters. A credit assignment is then design for the downstream reinforcement learning. Extensive experiments on SemibuildingSim and Sinergym demonstrate that ADAPT reduces HVAC energy consumption by 7.3\% and occupant discomfort by 30.2\% compared with state-of-the-art baselines under IID control. Under OOD control scenarios spanning unseen seasons and climate regions, ADAPT maintains robust performance with only marginal degradation relative to its IID performance, substantially outperforming existing methods in transfer robustness.

0.23