CS Paper Radar

ADAPT: Physics-Aware Diffusion-based World Models for Adaptive Predictive Transferable HVAC Control

Xu Yang, Kailai Sun, Dianyu Zhong, Qianchuan Zhao

cs.AI ·submitted 2026-08-20 08:58 UTC · v1

Abstract

Buildings account for roughly one-third of global energy consumption and CO$_2$ emissions. Optimizing indoor climate systems plays a critical role for urban climate mitigation aligned with UN Sustainable Development Goals 11 and 13. However, indoor delayed thermodynamic responses and partial observability severely hinder existing methods, which are primarily limited by implicit thermal inertia, occupancy dynamic prediction, and cumulative prediction errors, especially for out-of-distribution environments. In practice, these challenges are further exacerbated by the high cost and privacy burden of dense indoor sensing, forcing operators to collect only limited data in a single operating regime while expecting controllers to generalize reliably across unseen seasons and climate regions. To address this problem, we propose ADAPT, a physics-aware conditional diffusion indoor environmental world model for HVAC control. The model predicts a short-horizon held-action thermal baseline to capture the latent thermal inertia of the buildings. The diffusion backbone utilizes the robustness of generative models, while a learnable multi-zone heat-balance regularizer constrains generated trajectories to satisfy transferable building thermodynamics without requiring known building geometry or manually calibrated thermal parameters. A credit assignment is then design for the downstream reinforcement learning. Extensive experiments on SemibuildingSim and Sinergym demonstrate that ADAPT reduces HVAC energy consumption by 7.3\% and occupant discomfort by 30.2\% compared with state-of-the-art baselines under IID control. Under OOD control scenarios spanning unseen seasons and climate regions, ADAPT maintains robust performance with only marginal degradation relative to its IID performance, substantially outperforming existing methods in transfer robustness.

Closest papers

Nearest neighbours by meaning across the whole index.

Generalizing HVAC Control With Domain Randomized Reinforcement Learning

cs.LG ·2026-09-05 ·Pablo Boitel, Kun Zhang
published similarity 0.67
Abstract · 4 pages, 5 figures. Short paper published in ACM Sustainability Week Companion '26

Deploying advanced HVAC (Heating, Ventilation and Air Conditioning) controllers at scale remains difficult because performance often depends on accurate building models or per-site retuning. We propose NOMAD-RL (Neural Online Meta-Adaptation for Dynamics), a general-purpose Reinforcement Learning (RL) controller designed to transfer across heterogeneous thermal zones through a universal, non-invasive thermostat interface. The controller acts on temperature setpoints from zone measurements and forecasts, while a recurrent policy supports online adaptation under partial observability. Our main contribution is an adaptive domain randomization scheme based on physics-informed normalizing flows, which models correlated and multimodal distributions of thermal-zone parameters while maintaining physical plausibility and controllability. This produces a realistic and progressively adaptive training curriculum that improves transfer across buildings. We evaluate NOMAD-RL against a constant-setpoint PID controller, RL without domain randomization, and MPC in single- and multi-zone settings. NOMAD-RL consistently outperforms the PID and non-randomized RL baselines, and approaches the performance of a well-tuned MPC, especially in the more challenging multi-zone case. These results highlight the potential of adaptive, physics-informed domain randomization for robust and transferable HVAC control.

0.29

The Smart Buildings Challenge: Learning Foundation Models for Real-World Optimization at Scale

cs.AI ·2026-10-13 ·Judah Goldfeder, Ayush Rai, Philippe M. Wyder, Na Li, Victoria Dean +9 more
similarity 0.63
Abstract · This is for a Neurips 2026 competition

Buildings cause nearly 40\% of carbon emissions in the US. Of total building emissions, HVAC systems are responsible for approximately 40-60\% and account for 15\% of global energy consumption. Despite advances in artificial intelligence, most buildings still operate as inefficiently as they did decades ago. Building optimization, perhaps more so than any other optimization problem, has enormous potential for Machine Learning (ML) driven impact on climate change, in both the short and long term. One of the biggest obstacles for building optimization is the lack of policy transfer. Most building control systems, whether simulation or learning based, don't generalize: they only work well for the building they were developed for, but not for other buildings. To solve this problem, we propose a challenge for the development of building foundation models that easily adapt to new buildings with minimal configuration and thereby enable building optimization to scale across the globe. Participants will build control policies on a set of simulated buildings, and have their policies evaluated on an unseen set of buildings. The buildings vary in size, layout, weather, material properties, and HVAC system. Successful outcomes from this initiative promise a massive leap forward in global sustainability efforts and demonstrate the great potential of ML to combat climate change.

0.33

A sensor-driven physics-informed neural network for real-time occupant-centric space heating control

cs.LG eess.SY ·2026-11-01 ·Yunfei Bai, Chenghao Li, Sunku Prasad Jenne, Hao Wang, Sizhe Zhang +1 more
similarity 0.62
Abstract

Conventional space heating systems typically rely on single or sparse fixed-point temperature measurements, overlooking non-uniform indoor temperature distributions, transient thermal dynamics, and occupant-specific comfort requirements. This study explores an occupant-centric control strategy that aims to maintain the desired temperature around the occupant location. Spatially and temporally varying temperature fields, together with occupant mobility, make real-time local temperature estimation challenging. To address this challenge, we propose a control-oriented Physics-Informed Neural Network (PINN) model for indoor temperature-field prediction. Conventional PINNs rely on explicit time inputs and assume consistent temporal patterns across samples, which limits adaptability under variable initial conditions and heating sequences. The proposed model infers temporal dynamics implicitly from spatial coordinates and limited sensor measurements, improving robustness to changes in initial conditions and external disturbances. The method was validated across nine horizontal sensing planes in three controlled room-scale configurations. Against a validated COMSOL Multiphysics simulation, the PINN predicted the evaluated temperature fields with a maximum relative error below 1.85% across validation cases. These predictions supported an occupant-centric space heating control scheme. Compared with COMSOL-based offline control, the PINN-based system achieved an average prediction error of around 0.67%, and its rapid inference supports real-time occupant-centric control implementation. This work represents a move away from reliance on fixed-point temperature measurements in space heating control to an occupant-centric control strategy informed by real-time environmental feedback.

0.24

Safe Deep Reinforcement Learning for Energy-Efficient HVAC Control in Multi-Zone Residential Buildings

eess.SY ·2026-08-18 ·Oussama Ziadi, Abdelilah Rochd, Samir Idrissi Kaitouni, Mohamed Oualid Mghazli, Adnane Saoud
published similarity 0.61
Abstract · 6 pages, 5 figures. Accepted to IEEE Conference on Control Technology and Applications (CCTA) 2026

HVAC systems represent a major share of building energy consumption. Traditional control strategies are limited in coordinating energy-comfort tradeoffs across multiple zones simultaneously. Reinforcement learning (RL) offers adaptive, data-driven control that optimizes performance over time. However, deploying learned neural network controllers in safety-critical building systems remains challenging due to lack of formal safety guarantees. We propose a safety-certified deep RL framework for multi-zone residential HVAC control. Proximal Policy Optimization (PPO) and Soft Actor-Critic (SAC) agents are trained in an EnergyPlus/Sinergym simulation to minimize energy consumption while maintaining thermal comfort. Post-training safety certification is performed on the PPO policy using Lipschitz-based forward invariance analysis, building on existing tools for the computation of Lipschitz constants for neural networks, to guarantee constraint satisfaction. Both agents are evaluated over an annual simulation cycle in an eight-zone variable refrigerant flow (VRF) testbed. The PPO agent achieves 67\% comfort violation reduction compared to rule-based control, while the SAC agent achieves 27.6\% energy savings. The PPO policy satisfies formal safety certification with a margin of $2.003^\circ$C. These results demonstrate the feasibility of combining reinforcement learning with post-training safety verification for multi-zone building control.

0.20

A Transfer Learning-Driven Methodology for Efficient and Sustainable Indoor Localization Using VLC

cs.LG eess.SP ·2026-10-21 ·Masood Jan, Wafa Njima, Xun Zhang, Alexander Artemenko
published similarity 0.60
Abstract

The rapid expansion of the Internet of Things enables seamless collaboration among connected devices, making indoor localization a critical component of industrial automation. However, conventional localization techniques struggle in dynamic environments. These methods depend on extensive, frequent data collection and environment-specific calibration, limiting scalability, interoperability, and effective use of prior research while imposing significant energy penalties that hinder practical deployment. To address these challenges, we propose an energy-efficient transfer learning (TL) based approach for visible light communication based indoor localization. Our method leverages TL to tackle environmental variability, including lighting fluctuations and physical obstacles that typically degrade localization performance, while simultaneously reducing computational overhead and energy consumption compared to conventional approaches. We also introduce a novel model efficiency (ME) metric, designed to integrate localization accuracy, energy efficiency, data efficiency, and transfer gain into a single evaluative measure for comprehensive optimization. Evaluations on a real-world dataset collected from a BOSCH factory demonstrate that our model achieves a 47% improvement in localization accuracy compared to a conventional model that does not utilize TL, and achieves up to 67.5% ME with TL models, compared to only 10.4% in conventional models under high-noise conditions. These results underscore the potential of our approach to deliver a highly efficient and scalable indoor localization system suitable for energy-constrained industrial applications.

0.63

Online Optimization for Controlling HVAC Systems

eess.SY math.OC ·2026-11-05 ·Tong Wu, Dominik Baumann, Angela Fontan, Nicola Bastianello
similarity 0.60
Abstract

Heating, ventilation, and air-conditioning (HVAC) systems account for a significant portion of buildings' energy consumption, motivating the design of energy- and cost-efficient control strategies. However, conventional strategies employ simple, reactive control, without incorporating a model. Therefore, in this paper we adopt an economic model predictive control framework and focus on designing online algorithms to solve the control input design problems with a limited computational budget. In particular, we propose two tailored online algorithms based on projected gradient descent, with a custom projection routine, and the projected primal-dual method. We discuss the pros and cons of both algorithm designs, focusing in particular on computational efficiency. We further compare them through numerical experiments simulating the control of an HVAC system over the course of a day. The results show that computationally efficient online solvers for HVAC systems control are indeed possible. Moreover, the performance closely matches that of a baseline algorithm with unlimited computational budget, in terms of reference temperature tracking and comfort temperature range enforcement.

0.30

Very Exciting: Zero-Shot Model Predictive Control of Buildings via Excitation-Based Generalized Transfer Learning Models

eess.SY cs.LG ·2026-09-11 ·Fabian Raisch, Felix Koch, Zack Xuereb Conti, Christoph Goebel, Benjamin Tischler
similarity 0.59
Abstract · currently under review

The widespread adoption of data-driven, energy-efficient model predictive control (MPC) in buildings remains hindered by substantial effort to collect data and train models for individual buildings. Transfer learning (TL) has consequently gained increasing attention for target building modeling, as it reduces data requirements and modeling effort by reusing pretrained source models. However, these TL models are typically evaluated only on prediction accuracy in the target, without testing downstream control performance. To address this gap, we apply a state-of-the-art TL approach - pretraining a generalized model on multiple source buildings using standard operational data - within an MPC setup in a target building. We show that this approach is insufficient to achieve satisfactory control performance. As a solution, we introduce generalized models pretrained on excitation-based operational source data - purposefully probed inputs that explore the building's state-action space. For evaluation, we apply the generalized models via zero-shot (i.e., without fine-tuning) to 32 simulated target buildings and assess MPC performance. Our results show that excitation-based generalized models achieve the strongest control performance among all benchmarks, outperforming an online linear model-based MPC and a PI controller by 6.4% and 36.9%, respectively. By combining strong control performance with the ability to generalize across multiple buildings, without requiring any target-specific data, our approach reduces MPC setup cost and simplifies its widespread deployment in the building sector.

0.49

User-specified Kelvin-hour budgets within model predictive control for energy-efficient buildings: Simulation and field demonstration

eess.SY ·2026-09-06 ·Jicheng Shi, Colin N. Jones
similarity 0.59
Abstract

For energy-efficient building control, model predictive control (MPC) has been widely proposed to reduce energy use while maintaining prescribed indoor temperature bounds. In practice, MPC implementations may still produce temperature-bound violations because of model mismatch, weather-forecast errors, and softened constraints introduced to preserve feasibility. Existing soft- constrained MPC usually handles this trade-off through slack-weight tuning, so users cannot prescribe a violation-severity budget before operation. This paper develops a Kelvin-hour (Kh)-budget MPC that allows users to specify a running-average budget for temperature-bound violation severity. During operation, the controller uses the realized Kh budget surplus or overspend to update the temperature bounds, providing step-by-step budget feedback. We evaluate the method in two high-fidelity BOPTEST simulation cases and in an occupied residential deployment. In the first one-zone case, prescribed budgets produce clear running-average Kh violation responses across predictors and disturbance settings. At a prescribed budget of 0.005 Kh/step, the controller reduces energy use by 31.9% and Kh violation by 36.2% relative to the built-in default controller. In the second coupled two-zone case, separate zone budgets produce zone-level responses, with 18.9%-20.5% energy reduction and 9.4%-64.3% zone-level Kh violation reduction. In the occupied residential deployment, the running-average Kh violations remain close to or below their prescribed budgets under real sensing, actuation, weather, and occupancy conditions.

0.27