CS Paper Radar

A sensor-driven physics-informed neural network for real-time occupant-centric space heating control

Yunfei Bai, Chenghao Li, Sunku Prasad Jenne, Hao Wang, Sizhe Zhang, Jihong Wang

cs.LG eess.SY ·submitted 2026-11-01 09:16 UTC · v1

Abstract

Conventional space heating systems typically rely on single or sparse fixed-point temperature measurements, overlooking non-uniform indoor temperature distributions, transient thermal dynamics, and occupant-specific comfort requirements. This study explores an occupant-centric control strategy that aims to maintain the desired temperature around the occupant location. Spatially and temporally varying temperature fields, together with occupant mobility, make real-time local temperature estimation challenging. To address this challenge, we propose a control-oriented Physics-Informed Neural Network (PINN) model for indoor temperature-field prediction. Conventional PINNs rely on explicit time inputs and assume consistent temporal patterns across samples, which limits adaptability under variable initial conditions and heating sequences. The proposed model infers temporal dynamics implicitly from spatial coordinates and limited sensor measurements, improving robustness to changes in initial conditions and external disturbances. The method was validated across nine horizontal sensing planes in three controlled room-scale configurations. Against a validated COMSOL Multiphysics simulation, the PINN predicted the evaluated temperature fields with a maximum relative error below 1.85% across validation cases. These predictions supported an occupant-centric space heating control scheme. Compared with COMSOL-based offline control, the PINN-based system achieved an average prediction error of around 0.67%, and its rapid inference supports real-time occupant-centric control implementation. This work represents a move away from reliance on fixed-point temperature measurements in space heating control to an occupant-centric control strategy informed by real-time environmental feedback.

Closest papers

Nearest neighbours by meaning across the whole index.

Comparative Study of Canvas- and Coordinate-Based Geometry-Conditioned Neural Networks for Real-Time Prediction of Indoor Environments with Varying Room Dimensions

cs.AI cs.LG ·2026-10-11 ·Shaofan Wang, Philipp Geyer
benchmark similarity 0.62
Abstract

Computational fluid dynamics (CFD) is computationally expensive for iterative building design. Deep learning surrogates offer faster predictions, but generalization across varying room dimensions remains challenging. This study compares two geometry-conditioned neural network surrogate models for rapid indoor airflow and temperature field prediction under varying room sizes. During the architectural design stage, this method is relevant for real-time assessment of whether conditioned supply air will effectively provide fresh and cool air throughout rooms with varying heights and lengths. The canvas-based neural network (CaNN) explicitly encodes room size by preserving different occupied regions within a fixed canvas, whereas the coordinate-based neural network (CoNN) uses normalized coordinate channels. Both employ U-Net autoencoders to separately predict airflow and temperature fields. Evaluation uses simplified rooms with varying heights and lengths as a controlled benchmark. The results show that CaNN achieves higher agreement with CFD results than CoNN, demonstrating its potential to support performance-driven building design.

0.25

ADAPT: Physics-Aware Diffusion-based World Models for Adaptive Predictive Transferable HVAC Control

cs.AI ·2026-08-20 ·Xu Yang, Kailai Sun, Dianyu Zhong, Qianchuan Zhao
similarity 0.62
Abstract

Buildings account for roughly one-third of global energy consumption and CO$_2$ emissions. Optimizing indoor climate systems plays a critical role for urban climate mitigation aligned with UN Sustainable Development Goals 11 and 13. However, indoor delayed thermodynamic responses and partial observability severely hinder existing methods, which are primarily limited by implicit thermal inertia, occupancy dynamic prediction, and cumulative prediction errors, especially for out-of-distribution environments. In practice, these challenges are further exacerbated by the high cost and privacy burden of dense indoor sensing, forcing operators to collect only limited data in a single operating regime while expecting controllers to generalize reliably across unseen seasons and climate regions. To address this problem, we propose ADAPT, a physics-aware conditional diffusion indoor environmental world model for HVAC control. The model predicts a short-horizon held-action thermal baseline to capture the latent thermal inertia of the buildings. The diffusion backbone utilizes the robustness of generative models, while a learnable multi-zone heat-balance regularizer constrains generated trajectories to satisfy transferable building thermodynamics without requiring known building geometry or manually calibrated thermal parameters. A credit assignment is then design for the downstream reinforcement learning. Extensive experiments on SemibuildingSim and Sinergym demonstrate that ADAPT reduces HVAC energy consumption by 7.3\% and occupant discomfort by 30.2\% compared with state-of-the-art baselines under IID control. Under OOD control scenarios spanning unseen seasons and climate regions, ADAPT maintains robust performance with only marginal degradation relative to its IID performance, substantially outperforming existing methods in transfer robustness.

0.23

Physics-informed neural control of heat flow rate in a counter-flow heat exchanger: modeling, identification and experimental validation

eess.SY ·2026-10-04 ·Konstantinos Skantzikas, Emmanuel Witrant, Bojan Mavkov
similarity 0.60
Abstract

The advanced operation of heat exchangers plays a critical role in the development of efficient and sustainable multivector energy systems. This paper proposes a hybrid physics-informed and data-driven framework for the analysis, identification, and regulation of transient heat transfer in counter-flow heat exchangers. A parameterized physical model combines classical heat-transfer relations with transport equations to capture convective propagation, transport-induced delays, and nonlinear effects associated with flow-rate variations. The heat-transfer coefficient is identified from experimental data, enabling the characterization of flow-dependent heat-transfer dynamics over a broad operating range. The identified model is then used to develop a hierarchical real-time control strategy. An inner loop regulates the volumetric flow rate using a high-order data-driven linear model, while an outer loop regulates the exchanged heat power using a machine-learning controller initially trained on the physical model and subsequently refined with experimental data. Experimental results demonstrate accurate reproduction of transient heat-transfer dynamics and effective heat-flow-rate regulation under varying thermal boundary conditions (identification fit above 94\% in normalized root-mean-square error and total variation of the flow rate reduced by half compared to a proportional-integral controller). The proposed framework combines physical interpretability with data-driven adaptation for the analysis and real-time operation of dynamic heat-transfer systems.

0.29

Model-Free Control for Residential Heating: Deployment and Simulation of Nonlinear Data-Enabled Predictive Control

eess.SY math.OC ·2026-09-18 ·Sebastian Zieglmeier, Chris Verhoek, Jaap Eising, Mathias Hudoba de Badyn
similarity 0.58
Abstract · 19 pages, 8 figures, 7 tables

Residential heating accounts for a large share of building energy use, and predictive control strategies can reduce it by anticipating rather than reacting to the room temperature alone. The usual manner of implementing predictive control, model predictive control (MPC), requires an accurate model of each individual residential unit for heating control. Obtaining this model is time-consuming to obtain manually or even impossible, and such models do not transfer across a heterogeneous building stock. Data-enabled predictive control (DeePC) removes this modeling step by designing the controller directly using measured trajectories of the system. The foundations of DeePC, however, are built on the class of deterministic linear time-invariant systems, which is an unrealistic assumption for residential heating. This work applies three recently proposed nonlinear extensions of DeePC, collectively referred to as data-driven predictive control (DPC): Select-DPC, gain-scheduling DPC, and linear parameter-varying DPC. These are compared against standard DeePC and the hysteresis controller, the industry standard in residential heating. The comparison runs over a full heating season on a calibrated digital twin of an occupied research unit, the NEST research building in Switzerland, assessed by heating energy and comfort-band violation. Moreover, gain-scheduling DPC was deployed on the real residential apartment and validated the conclusions from the simulations. Each of the DPC controllers consumes significantly less energy than the hysteresis controller, amounting to roughly $11\%$ over the season, validating the use of DPC. The nonlinear methods further outperform linear DeePC in all assessed scenarios, and we analyze the relative costs and benefits of each nonlinear method.

0.41

From Thermal Preference Prediction to Adaptive Thermal Intervention: A Reinforcement Learning Approach Using Physiological and Environmental Sensing

cs.LG cs.AI ·2026-08-19 ·Isibor Kennedy Ihianle, Emmanuel Manu, Ehsan Asnaashari, Mojgan Jadidi, Pedro Machado +2 more
similarity 0.58
Abstract

Personalised thermal comfort is essential for occupant wellbeing and for the development of more responsive building-control strategies, yet conventional Heating, Ventilation, and Air Conditioning (HVAC) systems rely on static setpoints and population-level comfort models that fail to capture individual physiological variability. This paper presents a two-stage personalised thermal comfort approach integrating multimodal physiological and environmental sensing with reinforcement learning-based decision-making.

0.26

Heating in human-HVAC interaction for smart homes: An interdisciplinary overview

cs.HC cs.AIcs.SIeess.SY ·2026-09-20 ·Delong Korus-Du, Gunnar Stevens, Alexander Boden, Lenneke Kuijer, Apostolos K. Vavouris +4 more
published similarity 0.58
Abstract

As part of HVAC systems, residential heating provides foundational infrastructure for human habitation in cold weather. However, research on how residents interact with HVAC systems, particularly heating systems, remains fragmented across architecture, engineering, informatics, physiology, psychology, sociology, and design. Based on 541 studies from these fields, this review integrates interdisciplinary research on Heating in Human-HVAC Interaction in smart homes.The resulting synthesis is conceptualized through the Situated Interaction Dynamics of control and feedback between users and systems. User-initiated interactions involve monitoring past and present system performance and planning future operation, while system-initiated interactions rely on sensor networks to trigger automation or provide information enabling user action. These interaction dynamics connect Residents' Experience and Practices with Heating in HVAC System Mechanics. Residents' Experience and Practices include thermal comfort and energy management, where thermal comfort involves both individual physiological and psychological experiences of indoor climate and social practices shaped by norms, empathy, and negotiation among cohabitants. Heating in HVAC System Mechanics includes thermal conditions and energy performance. Thermal conditions concern the regulation of air temperature, mean radiant temperature, air velocity, and relative humidity, while energy performance concerns efficiency and environmental impact. This overview highlights four interdisciplinary tensions: sensed versus lived conditions, personalization versus negotiation, efficiency versus health, and automation versus agency. The resulting framework offers a conceptual lens to interpret heating interactions and design Human-HVAC Interaction that balances IEQ-driven healthy thermal conditions, affordability, and sustainability.

0.44

Generalizing HVAC Control With Domain Randomized Reinforcement Learning

cs.LG ·2026-09-05 ·Pablo Boitel, Kun Zhang
published similarity 0.57
Abstract · 4 pages, 5 figures. Short paper published in ACM Sustainability Week Companion '26

Deploying advanced HVAC (Heating, Ventilation and Air Conditioning) controllers at scale remains difficult because performance often depends on accurate building models or per-site retuning. We propose NOMAD-RL (Neural Online Meta-Adaptation for Dynamics), a general-purpose Reinforcement Learning (RL) controller designed to transfer across heterogeneous thermal zones through a universal, non-invasive thermostat interface. The controller acts on temperature setpoints from zone measurements and forecasts, while a recurrent policy supports online adaptation under partial observability. Our main contribution is an adaptive domain randomization scheme based on physics-informed normalizing flows, which models correlated and multimodal distributions of thermal-zone parameters while maintaining physical plausibility and controllability. This produces a realistic and progressively adaptive training curriculum that improves transfer across buildings. We evaluate NOMAD-RL against a constant-setpoint PID controller, RL without domain randomization, and MPC in single- and multi-zone settings. NOMAD-RL consistently outperforms the PID and non-randomized RL baselines, and approaches the performance of a well-tuned MPC, especially in the more challenging multi-zone case. These results highlight the potential of adaptive, physics-informed domain randomization for robust and transferable HVAC control.

0.29

PPIM: Pennes Physics-Informed Mamba for Heat-Source-Conditioned 3D Bioheat Simulation

cs.LG math-ph ·2026-09-06 ·Dongyun Lee, Kyungho Yoon, Minwoo Shin
code/data similarity 0.55
Abstract

Three-dimensional bioheat simulation aims to predict transient temperature distributions in biological tissue and is commonly modeled using the Pennes bioheat equation, which combines thermal diffusion, perfusion-mediated heat loss, and external heat generation. In this study, we consider a controlled 3D Pennes bioheat simulation under a localized heat-source condition inspired by microwave ablation (MWA). To evaluate neural approximation performance, we compare three neural partial differential equation (PDE) solvers under the same controlled simulation: a spatial Fourier-feature physics-informed neural network (PINN), a generic PINNMamba temporal subsequence model, and Pennes Physics-Informed Mamba (PPIM). PPIM builds on the temporal subsequence model by incorporating conditioned heat-source input and Pennes-aware state-space model (SSM) decay initialization. All three neural models are trained under the same conditions with the same Pennes residual, and an explicit finite-difference method (FDM) solution is used only as the numerical reference. In a representative 600~s run, PPIM achieved the lowest MAE, relative $L_1$ error, and relative $L_2$ error among the evaluated neural solvers. Error maps further showed that the remaining PPIM errors were more concentrated near the heat-source region than across the rest of the domain. These results indicate that PPIM is effective for approximating the FDM reference final temperature field in this controlled simulation. The source code is available at https://github.com/muvYun/PPIM.

0.42