CS Paper Radar

Comparative Study of Canvas- and Coordinate-Based Geometry-Conditioned Neural Networks for Real-Time Prediction of Indoor Environments with Varying Room Dimensions

Shaofan Wang, Philipp Geyer

cs.AI cs.LG ·submitted 2026-10-11 20:03 UTC · v1
benchmark

Abstract

Computational fluid dynamics (CFD) is computationally expensive for iterative building design. Deep learning surrogates offer faster predictions, but generalization across varying room dimensions remains challenging. This study compares two geometry-conditioned neural network surrogate models for rapid indoor airflow and temperature field prediction under varying room sizes. During the architectural design stage, this method is relevant for real-time assessment of whether conditioned supply air will effectively provide fresh and cool air throughout rooms with varying heights and lengths. The canvas-based neural network (CaNN) explicitly encodes room size by preserving different occupied regions within a fixed canvas, whereas the coordinate-based neural network (CoNN) uses normalized coordinate channels. Both employ U-Net autoencoders to separately predict airflow and temperature fields. Evaluation uses simplified rooms with varying heights and lengths as a controlled benchmark. The results show that CaNN achieves higher agreement with CFD results than CoNN, demonstrating its potential to support performance-driven building design.

Closest papers

Nearest neighbours by meaning across the whole index.

A sensor-driven physics-informed neural network for real-time occupant-centric space heating control

cs.LG eess.SY ·2026-11-01 ·Yunfei Bai, Chenghao Li, Sunku Prasad Jenne, Hao Wang, Sizhe Zhang +1 more
similarity 0.62
Abstract

Conventional space heating systems typically rely on single or sparse fixed-point temperature measurements, overlooking non-uniform indoor temperature distributions, transient thermal dynamics, and occupant-specific comfort requirements. This study explores an occupant-centric control strategy that aims to maintain the desired temperature around the occupant location. Spatially and temporally varying temperature fields, together with occupant mobility, make real-time local temperature estimation challenging. To address this challenge, we propose a control-oriented Physics-Informed Neural Network (PINN) model for indoor temperature-field prediction. Conventional PINNs rely on explicit time inputs and assume consistent temporal patterns across samples, which limits adaptability under variable initial conditions and heating sequences. The proposed model infers temporal dynamics implicitly from spatial coordinates and limited sensor measurements, improving robustness to changes in initial conditions and external disturbances. The method was validated across nine horizontal sensing planes in three controlled room-scale configurations. Against a validated COMSOL Multiphysics simulation, the PINN predicted the evaluated temperature fields with a maximum relative error below 1.85% across validation cases. These predictions supported an occupant-centric space heating control scheme. Compared with COMSOL-based offline control, the PINN-based system achieved an average prediction error of around 0.67%, and its rapid inference supports real-time occupant-centric control implementation. This work represents a move away from reliance on fixed-point temperature measurements in space heating control to an occupant-centric control strategy informed by real-time environmental feedback.

0.24

The Smart Buildings Challenge: Learning Foundation Models for Real-World Optimization at Scale

cs.AI ·2026-10-13 ·Judah Goldfeder, Ayush Rai, Philippe M. Wyder, Na Li, Victoria Dean +9 more
similarity 0.60
Abstract · This is for a Neurips 2026 competition

Buildings cause nearly 40\% of carbon emissions in the US. Of total building emissions, HVAC systems are responsible for approximately 40-60\% and account for 15\% of global energy consumption. Despite advances in artificial intelligence, most buildings still operate as inefficiently as they did decades ago. Building optimization, perhaps more so than any other optimization problem, has enormous potential for Machine Learning (ML) driven impact on climate change, in both the short and long term. One of the biggest obstacles for building optimization is the lack of policy transfer. Most building control systems, whether simulation or learning based, don't generalize: they only work well for the building they were developed for, but not for other buildings. To solve this problem, we propose a challenge for the development of building foundation models that easily adapt to new buildings with minimal configuration and thereby enable building optimization to scale across the globe. Participants will build control policies on a set of simulated buildings, and have their policies evaluated on an unseen set of buildings. The buildings vary in size, layout, weather, material properties, and HVAC system. Successful outcomes from this initiative promise a massive leap forward in global sustainability efforts and demonstrate the great potential of ML to combat climate change.

0.33

Semi-automated reconstruction of indoor geometry from 360-degree video for CFD-based airflow analysis in classrooms

cs.CV cs.CEphysics.flu-dyn ·2026-09-20 ·Dhruv Gamdha, James Afful, Shambhavi Joshi, Ulrike Passe, Adarsh Krishnamurthy +1 more
benchmark similarity 0.59
Abstract · 42 pages, 24 figures, 12 tables

Computational Fluid Dynamics (CFD) is widely used to evaluate ventilation and contaminant transport in occupied buildings, but deployment at scale is limited by three bottlenecks: acquiring room geometry without costly scanning hardware or manual CAD modeling, decomposing the scene into individually manipulable objects, and reconfiguring those objects for alternative layouts without re-capturing the room. We present a semi-automated workflow that converts a single 360-degree video of a room into individually editable, simulation-ready geometry assets. A dense point cloud is reconstructed using Neural Radiance Fields (NeRF), and 2D instance masks from text-prompted SAM 3 segmentation are lifted to 3D using multi-view consensus and depth-band filtering. Points are separated into object instances with an octree, and occlusion gaps are healed with a connectivity graph. Chair templates are fitted by Iterative Closest Point (ICP) alignment, and table geometry is generated procedurally. A browser-based editor supports quality assurance and rapid construction of alternative layout configurations. A steady Reynolds-averaged OpenFOAM solution then drives transient passive-scalar transport; the setup is verified using a mesh-sensitivity study and validated against an IEA Annex 20 benchmark. We apply the workflow to two university classrooms and a tiered lecture-hall auditorium. The capture-to-geometry pass takes two to five hours per room on a consumer workstation. In a controlled obstruction sequence in one classroom, the modeled half-clearance time varies non-monotonically as furniture is added, and a cross-room comparison indicates that clearance behavior cannot be reliably extrapolated between rooms, motivating per-room geometry acquisition. By making that acquisition low-cost, the workflow makes geometry-resolved comparative ventilation studies practical for spaces such as classrooms.

0.30

Safe Deep Reinforcement Learning for Energy-Efficient HVAC Control in Multi-Zone Residential Buildings

eess.SY ·2026-08-18 ·Oussama Ziadi, Abdelilah Rochd, Samir Idrissi Kaitouni, Mohamed Oualid Mghazli, Adnane Saoud
published similarity 0.57
Abstract · 6 pages, 5 figures. Accepted to IEEE Conference on Control Technology and Applications (CCTA) 2026

HVAC systems represent a major share of building energy consumption. Traditional control strategies are limited in coordinating energy-comfort tradeoffs across multiple zones simultaneously. Reinforcement learning (RL) offers adaptive, data-driven control that optimizes performance over time. However, deploying learned neural network controllers in safety-critical building systems remains challenging due to lack of formal safety guarantees. We propose a safety-certified deep RL framework for multi-zone residential HVAC control. Proximal Policy Optimization (PPO) and Soft Actor-Critic (SAC) agents are trained in an EnergyPlus/Sinergym simulation to minimize energy consumption while maintaining thermal comfort. Post-training safety certification is performed on the PPO policy using Lipschitz-based forward invariance analysis, building on existing tools for the computation of Lipschitz constants for neural networks, to guarantee constraint satisfaction. Both agents are evaluated over an annual simulation cycle in an eight-zone variable refrigerant flow (VRF) testbed. The PPO agent achieves 67\% comfort violation reduction compared to rule-based control, while the SAC agent achieves 27.6\% energy savings. The PPO policy satisfies formal safety certification with a margin of $2.003^\circ$C. These results demonstrate the feasibility of combining reinforcement learning with post-training safety verification for multi-zone building control.

0.20

Enhancing generalization in endwall film cooling prediction: Incorporating the superposition principle into transformer-based neural operators

cs.LG physics.comp-phphysics.flu-dyn ·2026-09-10 ·Qineng Wang, Liming Song, Tianyuan Liu, Zhendong Guo
publishedhighly cited similarity 0.55
Abstract · Author manuscript updated to align core methods and results with the published article; 29 pages, 18 figures, 5 tables

In this study, a physics-enhanced neural operator framework is proposed to enhance the generalization prediction ability of the cooling layout of a turbine endwall with variable number of film holes. Specifically, inspired by the film cooling superposition principle, we propose a film cooling prediction model, namely superposition-based deep neural operator (SDNO), that divides the endwall temperature field prediction into two stages. In the first stage, the cooling layout of a turbine endwall is divided into several sub-parts with randomly assigned film holes, and a Transformer-based neural operator network, namely Calculate Net, is designed to predict the temperature field of each sub-part. Then, in the second stage, another neural operator network, i.e., Super Net, is trained to combine the temperature fields predicted by Calculate Net for each sub-part and obtain the superposed temperature field of the full cooling layout. Additionally, instead of directly taking the film cooling contours as pixel plots, a signed distance function (SDF) which is sensitive to the variable locations of cooling holes, is designed to encode the location information of cooling holes. Furthermore, the proposed endwall film cooling prediction model is trained with the samples that changing the number of film holes from 1-5 with variable locations. Then, the trained prediction shows excellent generalization prediction ability, which can accurately predict the film effectiveness of the cooling layout with 10-20 film cooling holes that are unseen in the training samples. The proposed SDNO also improves prediction accuracy relative to the fully supervised baseline. With the above, the effectiveness of our proposed prediction model has been well demonstrated.

0.73

Scaling Cheap Synthetic Pretraining Improves Indoor Radio-Map Prediction

cs.LG cs.AI ·2026-10-13 ·Khoren Petrosyan, Artashes Mkrtchyan, Rafayel Mkrtchyan, Hrant Khachatrian, Theofanis P. Raptis
top venuebenchmarkcode/data similarity 0.54
Abstract · Accepted at NeurIPS 2026. This research was in part sponsored by the HESC MESCS RA grant No. 22rl-052 (DISTAL), and by the NATO Science for …

Real measurements are too limited to train an accurate indoor pathloss predictor that works across a wide range of buildings. Large-scale synthetic pretraining offers a way forward, but real building layouts are also scarce, and accurate ray-tracing simulators are slow, expensive, and often proprietary. We address both problems by introducing a generator that automatically creates diverse indoor layouts and a fast, open-source approximate ray tracer that computes radio maps for them. Using this pipeline, we generate 128M synthetic samples, pretrain ResNet-101 and Swin-T encoder-decoders, and fine-tune them on high-quality benchmark data. Despite simulator mismatch, our ResNet-101 model reduces error by 15% on average relative to the best known methods across five indoor radio-map prediction tasks and improves transfer on a small real-measurement dataset. Both architectures show predictable data-scaling trends: power laws fitted on 2M-16M samples predict the mean normalized downstream RMSE at 32M-128M with 3.33% mean absolute percentage error for ResNet-101 and 7.10% for Swin-T. These results show that pretraining on large amounts of cheap simulated data can improve indoor radio-map prediction, even when real measurements and high-quality simulations are limited.

0.38

Generalizing HVAC Control With Domain Randomized Reinforcement Learning

cs.LG ·2026-09-05 ·Pablo Boitel, Kun Zhang
published similarity 0.54
Abstract · 4 pages, 5 figures. Short paper published in ACM Sustainability Week Companion '26

Deploying advanced HVAC (Heating, Ventilation and Air Conditioning) controllers at scale remains difficult because performance often depends on accurate building models or per-site retuning. We propose NOMAD-RL (Neural Online Meta-Adaptation for Dynamics), a general-purpose Reinforcement Learning (RL) controller designed to transfer across heterogeneous thermal zones through a universal, non-invasive thermostat interface. The controller acts on temperature setpoints from zone measurements and forecasts, while a recurrent policy supports online adaptation under partial observability. Our main contribution is an adaptive domain randomization scheme based on physics-informed normalizing flows, which models correlated and multimodal distributions of thermal-zone parameters while maintaining physical plausibility and controllability. This produces a realistic and progressively adaptive training curriculum that improves transfer across buildings. We evaluate NOMAD-RL against a constant-setpoint PID controller, RL without domain randomization, and MPC in single- and multi-zone settings. NOMAD-RL consistently outperforms the PID and non-randomized RL baselines, and approaches the performance of a well-tuned MPC, especially in the more challenging multi-zone case. These results highlight the potential of adaptive, physics-informed domain randomization for robust and transferable HVAC control.

0.29

Shaping the Wind: Nested Potentials for Kinematically Admissible Urban Wind Prediction

cs.LG ·2026-10-04 ·Yidi Wang, Yunhe Zhang, Jiawei Gu, Ziyue Qiao, Pengyang Wang
dataset similarity 0.54
Abstract

Predicting transient urban winds is fundamental to understanding urban microclimates and designing climate-resilient cities. Building-resolving large-eddy simulation produces detailed incompressible urban wind fields at substantial computational cost for each layout. Neural surrogates offer a faster alternative by learning to predict the evolution of velocity fields. However, minimizing velocity prediction error does not guarantee local mass conservation and wall impermeability, which together define kinematic admissibility. This limitation stems from an unconstrained output representation: geometry conditioning guides predictions but does not restrict them to admissible velocity fields. Correcting boundary violations in these outputs changes the flux balance in adjacent fluid cells and may consequently compromise local mass conservation. To address the challenge, we propose Sculpt, a nested potential framework that builds the coupled, geometry-dependent constraints directly into its parameterization. This nested parameterization generates divergence-free velocity updates through the discrete curl of a volume vector potential on the native three-dimensional staggered grid. A shared scalar potential constrains the vector potential's boundary values so that the same operator also enforces impermeability, without a per-step pressure projection. Because backpropagation through this curl attenuates large-scale gradient signals, we parameterize the volume potential at multiple resolutions to better capture large-scale flow structures. We introduce UrbanWindFlow, an LES dataset spanning urban morphologies and inflow conditions, to evaluate accuracy and kinematic admissibility together.

0.15