CS Paper Radar

Robust Wave Origin Detection from Sensor Array Data via Randomized Hough Transform and Model Fitting

Sicheng Fan, Jiayi Lu, Xiaodan Fan

eess.SP stat.ME ·submitted 2026-09-04 16:43 UTC · v1

Abstract

The robustness of methods for characterizing the origin of wave-like propagating signals is often challenged by the heterogeneity of transmitting media and sensor network. Detecting an individual wave under such noisy conditions remains particularly difficult. In this paper, we propose a robust framework to estimate wave origins from spatiotemporal data collected by a sensor array. First, a Butterworth filter is designed to extract relevant signals from each sensor channel. Next, a 3D randomized Hough transform is introduced to identify candidate signals originating from the same wave front. Finally, a wave propagation model is fitted to the identified signals using the least-squares method. By combining the iterative voting mechanism of the randomized Hough transform with least-squares optimization, our proposed method demonstrates superior robustness and computational efficiency in both simulation studies and real-world data analyses.

Closest papers

Nearest neighbours by meaning across the whole index.

Spatial Thickness Mapping in Heterogeneous Plate Using Wave Physics-Informed Regression

eess.SP ·2026-10-01 ·Amanda Beck, Harsha Vardhan Tetali, Michael MacIsaac, Charlie Tran, Woohyun Eum +2 more
similarity 0.48
Abstract

Traditional guided wave methods for structural health monitoring typically assume uniform material properties, which limit their ability to characterize heterogeneous structures with spatially varying thickness, damage, or material properties. These are challenges commonly encountered in corrosion assessment, composite delamination detection, and structural degradation monitoring. This paper presents a wave physics-informed regression approach that enables spatially resolved characterization of material properties by extracting local dispersion curves across a structure. Our approach focuses on a highly interpretable but flexible physics-informed framework that can be solved using fast algorithms and achieve robust numerical solutions. This paper discusses the mathematical design of the framework, the algorithm, and its interpretation. The framework was applied to a guided wave wavefield imaging dataset from a thin aluminum plate with non-uniform thickness around a hole to validate its practicality. The framework creates an accurate thickness map (correlation coefficient 0.94 with x-ray CT validation) as well as extracts the frequency-dependent velocities of waves within those regions.

0.25

ROMNet: a hybrid reduced order modeling and machine learning approach to waveform inversion

cs.LG math.NAphysics.geo-ph ·2026-08-25 ·Liliana Borcea, Alexander Mamonov, Kui Ren, Haizhao Yang, Chugang Yi
similarity 0.48
Abstract

Waveform inversion seeks to estimate the wave speed of a heterogeneous, inaccessible medium, from time-resolved measurements of the waves at user controlled sensors. We consider this inverse problem for acoustic waves and an active array of source/receiver sensors that emit probing signals and measure the generated pressure waves. The forward map, from the wave speed to the measurements, is nonlinear and oscillatory. The oscillations cause cycle skipping, the main impediment to using the standard, nonlinear least-squares data fitting formulation, known as full waveform inversion (FWI). A recently introduced alternative waveform inversion approach computes from the measurements an algebraic surrogate of the wave operator, a reduced order model (ROM) matrix, which is then used to estimate the wave speed. The mapping from the measurements to the ROM is nonlinear, but well understood. It is computed efficiently, in a non-iterative manner. The nonlinear mapping from the ROM to the wave speed is less understood, and its approximation involves time-consuming optimization. Our goal in this paper is to use a neural network to map the ROM matrix to a nearby one, that has a simpler and explicit dependence on the wave speed. This simplifies and reduces the computational cost of the ROM-based waveform inversion. We introduce the methodology, called ROMNet, and test it with numerical simulations, using two training data sets: The first set consists of random media with variations of the wave speed modeled by a superposition of Gaussians with random amplitudes and standard deviations. The second is the publicly available GeoFWI dataset introduced for benchmarking FWI using deep learning. We compare the performance of ROMNet with the direct ROM-based inversion and with two representative deep learning approaches to FWI: ``Fourier-DeepONet" and ``InversionNet".

0.47

Wavenumber-Domain Virtual Arrays for Holographic Near-Field Localization

eess.SP ·2026-08-10 ·Giovanni Iacovelli, Chandan Kumar Sheemar, Symeon Chatzinotas
similarity 0.46
Abstract

Monostatic localization of multiple point targets is studied for a holographic aperture operated through wavenumber-domain modes. A specular-point condition delimits the validity of the spectral model as a near-field approximation. A single snapshot observes a projection of dimension at most the target count times the polarization components, while invertible coding recovers the full channel and places the decoded data on the difference lattice of transmit and receive wavenumbers. Rank conditions settle identifiability, and the Fisher matrix reduces to a covariance over the lattice, dictating a nested mode selection that attains full-aperture resolution with only tens of RF chains.

0.38

Wave-Robust Passive AUV Localization Using FP-MUSIC

cs.RO ·2026-09-23 ·Usama Saqib, Ola Rønning, Andrzej Wąsowski
similarity 0.46
Abstract

Localizing an autonomous underwater vehicle without pre-deployed seabed transponders, or direct access to onboard vehicle sensors remains a core challenge. We present a receiver-passive 3-D localization and spatial mapping system utilizing a single floating surface buoy equipped with a hydrophone array and an inertial measurement unit (IMU). The central difficulty is that surface wave motion induces six-degree-of-freedom (6-DOF) perturbations that rotate the array between snapshots, degrading conventional subspace processing. We resolve this by introducing a fixed-point iterative MUltiple SIgnal Classification algorithm (FP-MUSIC) that uses IMU measurements to de-warp snapshot covariances prior to direction-of-arrival estimation. Furthermore, we employ a subspace-projected wideband matched filter to resolve beacon ranges and use power asymmetry for independent front-back identification. Evaluations across simulated sea states demonstrate that FP-MUSIC substantially reduces localization error relative to uncompensated methods and sustains robust 3-D tracking and vehicle orientation estimation under wave-induced motion. At moderate sea state, FP-MUSIC increases the 2-m beacon-separation accuracy from approximately 45% to 75%.

0.19

Fluid Antenna Channel Reconstruction with Non-Negative Least Square Detector

eess.SP cs.IT ·2026-08-24 ·Yang Chen, Jian Dang, Zaichen Zhang
similarity 0.45
Abstract

Reconstructing the full-aperture channel of a fluid antenna system (FAS) from a few activated ports requires inferring unobserved responses from limited spatial samples. This paper proposes a covariance-domain FAS channel-reconstruction method based on nonnegative least squares (NNLS). A nonuniform port arrangement constructs a difference coarray with an enlarged aperture. Vectorizing the sample covariance maps the physical array to a virtual steering dictionary, and the resulting complex covariance-fitting model is recast as a strictly equivalent real-valued NNLS problem. A projected-gradient iteration initialized at zero estimates the nonnegative angular-occurrence coefficients, and the L_s strongest well-separated peaks yield the angles of arrival (AoAs). Simulations show that the proposed FAS-NNLS estimator exploits the enlarged virtual aperture and achieves lower AoA mean squared errors than uniform linear array (ULA) multiple signal classification (ULA-MUSIC) and ULA estimation of signal parameters via rotational invariance techniques (ULA-ESPRIT). Its non-line-of-sight (NLoS) path accuracy matches FAS covariance matching pursuit, while its line-of-sight (LoS) estimation is significantly improved.

0.17

On Distributed Sensing and Adversarial Localization of Narrowband Acoustic Sources for Offshore Data Center Monitoring

cs.RO ·2026-10-25 ·Adnan Abdullah, David Blow, Harsha Gundala Sureshbabu, Dongyoon Joung, Sara Rampazzi +1 more
similarity 0.45
Abstract · Technical report, 19 pages, 11 figures

This report investigates an acoustic surveillance framework for localizing and tracking narrowband adversarial acoustic sources that threaten offshore data centers. Unlike conventional sound source localization (SSL) methods that rely on broadband signals and compact receiver arrays, the considered scenario involves narrowband emissions and sparse sensors. In such scenarios, the observed time-difference-of-arrival (TDOA) measurements are aliased and produce an ambiguous solution space, rendering conventional localization methods ineffective. To address this challenge, we integrate a mobile receiver that temporarily forms anchor pairs with selected fixed receivers, constraining the feasible solution space. The proposed two-stage pipeline first estimates the initial source position using anchor constraints, then initializes a particle filter that jointly tracks source position and velocity using one live anchor measurement and quality-adaptive fixed-pair measurements. We evaluate the proposed method through Monte Carlo acoustic simulations, ROS-Gazebo robotic demonstrations, and open-water field experiments. Our framework achieves a localization success rate of 91% in simulation, while 9 of 10 field trials show tracking error below 2m under receiver-position uncertainty and noisy sensing conditions. These findings demonstrate the feasibility of passive acoustic surveillance for protecting large-scale infrastructure against acoustic threats.

0.27

Covariance Learning for Direction-of-Arrival Estimation with Sparse Linear Arrays

eess.SP ·2026-10-28 ·Majdoddin Esfandiari, Esa Ollila, Geert Leus, Daniel P. Palomar
similarity 0.45
Abstract

Covariance learning (CL) estimates source powers and sensor-noise variance by minimizing the Type-II (marginal) negative log-likelihood of the array measurements. We develop both grid-based and gridless CL direction-of-arrival (DOA) estimators applicable to arbitrary sparse linear array (SLA) geometries. The grid-based DOA estimator minimizes the Type-II objective on an angular grid via successive convex approximation (SCA) and estimates the noise variance by a scalar bisection search. The gridless DOA estimator then refines each grid-based DOA over the continuum using a Newton method. Simulations on a six-sensor nested array, including an underdetermined case with nine sources, show that the proposed DOA estimators outperform state-of-the-art methods, despite jointly estimating the sensor noise variance.

0.25

Leveraging Bayesian Optimization for Array Shape Self-Calibration in Underwater DoA Estimation

eess.SP physics.optics ·2026-08-31 ·Xin Gui, Tianang Li, Changjia Wang, Bowen Han, Yunchuan Zhang +1 more
benchmark similarity 0.44
Abstract · 13 pages, 12 figures, submitted to an IEEE journal

Flexible sensing arrays are commonly used in underwater acoustic networks, but suppressed by unpredictable geometric deformations. Existing array shape self-calibration methods often estimate individual element positions separately, leading to a high dimensional optimization problem over long arrays. To address this problem, this paper proposes a Bayesian Optimization-assisted Geometry Estimation (BOGE) strategy operating with a hierarchical optimization process and a physics-informed parametric model for array geometry correction. BOGE formulates array shape self-calibration as an optimization problem, where candidate geometries are evaluated by the noise subspace residual. We perform Bayesian optimization to configure the physics-informed parametric model and then refine the selected geometry through numerical optimization. Empirical results show that BOGE achieves lower mean geometric root mean square error (RMSE) than the benchmark methods across a wide range of noise levels. On the public SWellEx-96 dataset, BOGE achieves a geometric RMSE of $0.659$ meters at $166$ Hz. A lake trial further shows that BOGE provides fixed source localization and moving target tracking performance comparable to the comparison methods.

0.24