CS Paper Radar

Spatial Thickness Mapping in Heterogeneous Plate Using Wave Physics-Informed Regression

Amanda Beck, Harsha Vardhan Tetali, Michael MacIsaac, Charlie Tran, Woohyun Eum, Ghatu Subhash, Joel B. Harley

eess.SP ·submitted 2026-10-01 02:26 UTC · v1

Abstract

Traditional guided wave methods for structural health monitoring typically assume uniform material properties, which limit their ability to characterize heterogeneous structures with spatially varying thickness, damage, or material properties. These are challenges commonly encountered in corrosion assessment, composite delamination detection, and structural degradation monitoring. This paper presents a wave physics-informed regression approach that enables spatially resolved characterization of material properties by extracting local dispersion curves across a structure. Our approach focuses on a highly interpretable but flexible physics-informed framework that can be solved using fast algorithms and achieve robust numerical solutions. This paper discusses the mathematical design of the framework, the algorithm, and its interpretation. The framework was applied to a guided wave wavefield imaging dataset from a thin aluminum plate with non-uniform thickness around a hole to validate its practicality. The framework creates an accurate thickness map (correlation coefficient 0.94 with x-ray CT validation) as well as extracts the frequency-dependent velocities of waves within those regions.

Closest papers

Nearest neighbours by meaning across the whole index.

Physics-Informed Sinusoidal Representation Networks for Damage Identification in Ultrasonic Guided Wave Structural Health Monitoring

cs.CE cs.LG ·2026-11-09 ·Lukas Jilke, Caspar Wasle, Norbert Hosters, Florian Raddatz, Marek Behr +1 more
similarity 0.56
Abstract · 19 pages, 12 figures, 6 tables

Ultrasonic guided wave (UGW) inspection has become an effective method in structural health monitoring (SHM). While machine learning has enhanced damage detection capabilities, purely data-driven models remain constrained by extensive labeled datasets and limited physical interpretability. Standard multi-layer perceptrons (MLPs) further suffer from spectral bias (F-Principle) in high-frequency regimes, prioritizing low-frequency components while failing to resolve the high-frequency oscillations critical for UGW reconstruction. Physics-Informed Sinusoidal Representation Networks (PI-SIRENs) address these limitations by embedding governing partial differential equations directly into the training process. Building upon SIRENs, which utilize periodic activation functions to inherently capture high-frequency spectral content, the proposed framework is designed to operate effectively in sparse ultrasonic measurement regimes. This work introduces a frequency-domain PI-SIREN framework tailored for the Mindlin-Reissner plate theory to reconstruct ultrasonic wavefields without temporal discretization. The model parameters are optimized using a hybrid strategy comprising three phases: first-order Adam, residual-adaptive refinement (RAR) and quasi-Newton L-BFGS. Numerical and experimental evaluations confirm that the model serves as a physics-consistent baseline derived from sparse data, functioning as a computationally efficient surrogate for damage identification in SHM and non-destructive testing (NDT). Integrating the surrogate into a damage identification pipeline detects and localizes a milled notch from sparse experimental measurements with a localization error of 1 % of the plate diagonal. In contrast, data-driven benchmarks and MLPs with hyperbolic tangent activation functions, with and without Fourier feature embedding, are unable to identify damage due to higher reconstruction errors.

0.32

Learning Metamaterial Eigenmodes with Wavelet-Encoded Fourier Neural Operators

cs.LG cond-mat.mtrl-scics.CEphysics.comp-ph ·2026-09-08 ·Han Zhang, Alexander Ogren, Cynthia Rudin, Johann Guilleminot, L. Catherine Brinson
similarity 0.53
Abstract

Machine learning surrogates based on neural operators have shown broad applicability in solving forward PDE problems. However, eigenvalue problems, in which an eigenparameter and one of several valid eigenmodes must be simultaneously solved, remain difficult because standard operator learning formulations assume a unique input-output map. This work demonstrates that Fourier Neural Operators (FNOs), combined with wavelet-based encodings of PDE inputs, can learn and predict multiple eigenmodes of the elastic wave equation, corresponding to deformation modes of acoustic waves propagating through arbitrary metamaterial geometries. We provide a mechanistic explanation and experimental evidence for why wavelet encodings are well matched to the dual spatial-spectral structure of the FNO, enabling deterministic mode selection on both continuous-valued and binary-valued geometries within a single model, and for why prediction accuracy varies with geometric discontinuities. For metamaterial design, the resulting surrogate accelerates the simulation stage of the design cycle by three orders of magnitude relative to finite element analysis on a consumer-grade CPU, while preserving high fidelity. These results also carry broader implications for designing input encodings in other multi-mode PDE solvers based on spectral neural operators.

0.12

Evaluation of effective wave velocities in polycrystalline materials using the ultrasonic reflection matrix

eess.IV physics.app-ph ·2026-09-22 ·Gatien Clément, Alexandre Aubry, Cécile Brütt, Benoît Gérardin, Claire Prada
unusual similarity 0.51
Abstract · 13 pages, 14 figures

In-depth characterization of heterogeneous materials has long been a challenge in non-destructive testing. Here, a method is proposed to determine the elastic constants of metallic polycrystalline materials using back-scattered ultrasound. The waves scattered by the microstructure are analyzed to image the effective bulk velocities. To this end, a reflection matrix is acquired with an array of transducers. The projection of this matrix onto a focused basis is used to estimate an average point spread function. Optimizing this function with respect to the propagation model leads to an estimation of the longitudinal velocity. Additional treatments are developed to adapt the method to map the shear wave velocity. The local Poisson's ratio is then deduced from the ratio between those two velocities. Young's modulus and shear modulus can also be obtained assuming known densities. This matrix approach is experimentally validated on different polycrystalline materials. A sample displaying heterogeneous mechanical properties is then simulated to assess the accuracy and the resolution of the method. Its strengths and limitations are discussed, demonstrating its potential for quantitative non-destructive material characterization.

0.30

Neural Surrogate Modeling of Ultrasonic Wave Propagation in Heterogeneous Media

cs.LG ·2026-10-09 ·Burla Nur Korkmaz, Petro Moilanen, Ari Salmi, Harsha Vardhan Tetali, Arto Klami
similarity 0.51
Abstract · Submitted to IEEE ICASSP 2027

Neural surrogates provide computationally efficient auto-regressive modeling of wave propagation, enabling e.g. fast inverse solutions. Despite recent progress, the current surrogates are not yet sufficient for the needs of ultrasonic sensing, characterized by high frequency and heterogeneous propagation media. We show how methods building on Fourier Neural Operators (FNO) fail to capture essential signal features, such as reflections, whereas U-Net -based methods learn the wave fields well but lack the ability to transfer information across different spatial scales. We then propose a new surrogate that captures the best of the two worlds, by integrating FNOs and local-integral resampling into a U-Net architecture. We show it can be trained on limited data, and that the predictions are robust to input noise and work across spatial scales.

0.16

Wave Physics as Representation: Tensor-Structured Neural Reconstruction for Ocean Acoustic Fields

cs.LG cs.AIcs.SDeess.AS ·2026-11-01 ·Yifan Sun, Panqi Chen, Weifeng Shi, Xiao Fu, Lei Cheng
similarity 0.50
Abstract

Reconstructing three-dimensional (3D) complex ocean acoustic fields from sparse measurements is challenging due to highly oscillatory wave structures and restricted sensing patterns/routes. Learning-based approaches fall into two categories. First, purely data-driven models can learn complex field patterns, but do not explicitly exploit wave physics that may enhance interpretability and reduce training costs. Second, physics-informed methods impose a specified physical equation as a reconstruction constraint, but often require environment-dependent parameters that are difficult to acquire. As a result, practical 3D acoustic field reconstruction that is both physically grounded and robust to uncertain environmental information remains largely unexplored. This work takes an alternative route: instead of solving a fully specified wave equation, it extracts a structured representation from wave physics and learns its components from data. From the Helmholtz equation and normal mode propagation, we derive a structured spatial-angular tensor representation, termed the S/c representation. Under a low-rank specialization, it takes the form of a rank-(L,L,1) block-term tensor decomposition, which connects structured sampling patterns/routes used in ocean sensing to sufficient conditions for field recovery. Building on this tensor representation, we propose TIDAL, a neural reconstructor that uses the S/c representation as an inductive bias for structured decoding and aligns information aggregation with the sampling geometry. The neural learner removes the need for known model parameters required by conventional physics-based recovery methods. Experiments across three structured sampling geometries show that TIDAL achieves the best reconstruction performance and fastest inference among baselines, with benefits from the physics-derived representation under limited data and model capacity.

0.22

Neural network scaling and generalization for 3D strain fields in heterogeneous materials

cs.CE physics.comp-ph ·2026-11-10 ·Lucas Fourel, Paul Devianne, Marine Debouvry, Tristan Destruhaut, Russell Gunn +3 more
similarity 0.49
Abstract

Computational homogenization and coupled multiscale simulations of heterogeneous materials require repeated solution of mechanical fields on Representative Volume Elements, which becomes prohibitively expensive for high-resolution three-dimensional microstructures. Machine-learning surrogates can accelerate these computations, yet most existing approaches predict fields for fixed macroscopic loadings and provide limited guidance on how to scale network architectures for high-resolution 3D tensor-field prediction. This work presents a U-Net surrogate trained to predict the full 36-component strain localization tensor field in voxelized concrete mesostructures at resolutions up to $256^3$. Training localization tensors are generated with an FFT-based linear elastic solver, and an extensive hyperparameter optimization is performed to derive scaling rules and an accuracy-speed trade-off analysis. The results show that only network width and depth need to be scaled with problem complexity, while several conventional U-Net design choices, such as doubling channels after downsampling, are suboptimal for this problem. The final neural network achieves a Mean Absolute Error of 1.118% on both the validation and the held-out test sets, and an inference speedup of approximately 8.7x over the FFT-based solver on an Nvidia H100 GPU. Generalization experiments reveal transfer across aggregate volume fractions and highlight the importance of training on diverse morphologies. To safeguard reliability, a Maximum Mean Discrepancy metric computed on internal feature maps is proposed for detecting out-of-distribution microstructures without costly reference computations.

0.37

Solving the Elastic Wave Equation with Physics-Informed Neural Networks: A Robust and Critical Assessment

cs.LG ·2026-09-07 ·Davide Staub, Ben Moseley
similarity 0.48
Abstract · Comments: 154 pages, 44 figures. Based on the Master's thesis of Davide Staub, ETH Zurich, March 2024. Original thesis: https://doi.org/10.3…

Physics-Informed Neural Networks (PINNs) have recently emerged as a promising approach for solving Partial Differential Equations (PDEs), offering a meshfree alternative that integrates physical principles into the learning process. This presents a new paradigm compared to traditional discretization methods and purely data-driven machine learning techniques. While promising, PINNs are not a panacea; they inherit challenges such as spectral bias and unstable convergence. Moreover, their potential in seismology remains largely unexplored. In this work, we provide a robust and critical assessment of PINNs for solving the elastic wave equation in seismology. We investigate the performance of PINNs on problems with varying degrees of complexity across various seismic sources and parameter models, from constant to highly heterogeneous settings. A pivotal aspect of our work involves investigating whether embedding physical principles directly into the network architecture enhances convergence and accuracy. We test an extensive range of neural architecture designs, from unrestricted, uninformed PINNs to highly specialized ones. We find that integrating an understanding of wave physics into the network design significantly improves accuracy. For instance, introducing a custom wavelet or plane wave layer, coupled with encoder and decoder layers, consistently yields a relative $L_2$ error approximately half that of the standard PINN, as evidenced across numerous experiments. We further demonstrate that this novel architecture enhances accuracy when applied to the acoustic wave equation, underlying the versatility of our network. Another key contribution of our research is the successful conditioning of PINNs on seismic source locations. This signifies a considerable advancement towards rapid seismic hazard detection and seismic analysis.

0.51

Robust Wave Origin Detection from Sensor Array Data via Randomized Hough Transform and Model Fitting

eess.SP stat.ME ·2026-09-04 ·Sicheng Fan, Jiayi Lu, Xiaodan Fan
similarity 0.48
Abstract

The robustness of methods for characterizing the origin of wave-like propagating signals is often challenged by the heterogeneity of transmitting media and sensor network. Detecting an individual wave under such noisy conditions remains particularly difficult. In this paper, we propose a robust framework to estimate wave origins from spatiotemporal data collected by a sensor array. First, a Butterworth filter is designed to extract relevant signals from each sensor channel. Next, a 3D randomized Hough transform is introduced to identify candidate signals originating from the same wave front. Finally, a wave propagation model is fitted to the identified signals using the least-squares method. By combining the iterative voting mechanism of the randomized Hough transform with least-squares optimization, our proposed method demonstrates superior robustness and computational efficiency in both simulation studies and real-world data analyses.

0.26