CS Paper Radar

Learning In-Hand Object Reaching to General 6D Poses

Junxiao Lin, Tianyue Wu, Jie Yin, Jia Pan, Kaifeng Zhang, Weiming Zhi

cs.RO ·submitted 2026-09-12 07:11 UTC · v1

Abstract

In-hand manipulation allows multi-fingered dexterous hands to reconfigure grasped objects without releasing and regrasping them. This improves manipulation efficiency by reducing repeated grasp acquisition and large arm motions. However, most learning-based methods focus on reorientation, continuous rotation, or translation, whereas many tasks require joint control of object position and orientation. We formulate this capability as in-hand 6D object pose reaching: starting from an existing grasp, coordinated finger motions move the object to a palm-relative target pose. We present POISE (Palm-relative Object reaching In SE(3)), a sim-to-real reinforcement learning framework for this task. POISE combines diverse stable-grasp initialization, goal- and geometry-conditioned control, an adaptive 6D goal curriculum, and a compact reward scheme for pose reaching and grasp preservation. In simulation, diverse initialization raises held-out-grasp success from 40.1% to 51.5% and post-drop recovery from 33.8% to 72.9%; the curriculum raises full-range success from 6.2% to 59.5%. On hardware, the grasp-maintenance reward improves three-target sequence success from 20% to 80%. In real-world experiments, POISE reaches successive 6D targets without manual reset across multiple object geometries and wrist orientations, and recovers from external disturbances. To support further research in dexterous manipulation, we will release our code at https://junxiaolin.github.io/poise-website/.

Comment
8 pages, 8 figures. Project website: https://junxiaolin.github.io/poise-website/

Closest papers

Nearest neighbours by meaning across the whole index.

Steerable and Reactive Grasping Through Modular Design with a Three-Point Interface

cs.RO ·2026-09-21 ·Andrew Nguyen, Yonghyeon Lee, Sangbae Kim
similarity 0.78
Abstract

Dexterous grasping requires deciding where to grasp, reaching the target, and maintaining stable contact. We connect these stages through a compact three-point interface that separates global geometric reasoning from local contact control. Given object geometry and optional language commands, our framework samples contact triples from a precomputed grasp-affordance heatmap. A model-based reactive controller tracks the object, avoids collisions, and guides the hand toward the selected contacts. In the final centimeters, a Reinforcement Learning (RL) policy uses proprioceptive feedback to refine and stabilize the grasp despite reaching and perception errors. It observes only finger joint states and its recent actions, with no target points, visual observations, or object geometry, so a single policy is shared across objects and grasp configurations. In simulation, we compare grasp-and-lift success against squeeze and end-to-end baselines, characterize reaching convergence, and demonstrate grasp steering; hardware demonstrations on two training objects and one unseen object illustrate the full pipeline. Our modular framework uses geometry to guide the reach and local feedback to secure the grasp.

0.20

Uni-PNP: Unified Prehensile and Non-prehensile Policy Learning for Generalizable Object Pose Reaching

cs.RO ·2026-10-15 ·Wenxuan Zhu, Yuze Wang, Jiangran Lyu, Jiayi Chen, Yixin Zheng +4 more
code/data similarity 0.77
Abstract

Object manipulation often requires combining non-prehensile actions with grasping. However, existing approaches typically develop these capabilities separately and integrate them by sequencing distinct primitives through prescribed intermediate objectives, limiting the coordination of contact motions and grasping. Their integration also remains sensitive to object and gripper geometry and depends on particular environmental supports, complicating real-world deployment. We present Uni-PNP, a unified policy that jointly learns prehensile and non-prehensile manipulation for object pose reaching across diverse objects and grippers. To achieve this, we first pretrain a geometry encoder to predict contact-induced object motion using a contact-dynamics dataset constructed from simulated interactions between diverse objects and grippers. We then train the policy in a two-stage reinforcement learning curriculum from graspable objects to ungraspable peers, encouraging the discovery of non-prehensile interactions and their integration with grasping. Experiments show 76.39% success on hundreds of seen objects with grippers, and 57.91% on unseen peers, outperforming the strongest pose-reaching baseline by 20.52 and 17.79 percentage points, respectively. We also analyze emergent behaviors, including nonprehensile and prehensile repositioning, grasp acquisition that requires grasping after tipping, and table-assisted reorientation while grasping, and transfer to the real-world scenario. Project page available at lgswdn.github.io/Uni-PNP.

0.23

SimDuoReal: Object-Centric Bimanual Policy for Emergent Dexterity

cs.RO ·2026-11-07 ·Qiyang Yan, Yulin Liu, Akash Sharma, Haozhi Qi, Guanya Shi +1 more
similarity 0.76
Abstract · Website: https://simduoreal.github.io

Bimanual dexterous manipulation requires coordinated arm and hand control, yet specifying such coordination manually is challenging and often task-specific. In this work, we explore whether complex bimanual dexterity can emerge from a simple object-centric learning objective. We train reinforcement learning policies under a shared object-centric reward, varying their training environments rather than tuning separate rewards for each behavior. We find that the policies discover pre-grasp manipulation, grasping and regrasping, in-hand adjustment and handover to reach object-pose goals without hand-designed motion sequences. We then refine the experts on transition states and use DAgger and reinforcement learning to distill them into a single policy that composes these behaviors for diverse bimanual tasks. On real hardware, the same policy succeeds in 61 of 80 trials (76.3\%) across four tasks with unseen objects and no task-specific fine-tuning. In simulated barcode scanning, our policy achieves 85.0\% success, compared with 60.4\% for two single-arm policies without handover. These results suggest that this objective provides a simple and scalable interface for learning general bimanual dexterity, shifting the burden from manually designing robot coordination to specifying what should happen to the object.

0.17

Dexterous In-Hand Object Pose Reaching with Learned Safety Filters

cs.RO cs.LGeess.SY ·2026-10-27 ·Ian Chuang, Hiya Shah, Vamsi Chilamkur, Iman Soltani, Claire Tomlin
code/data similarity 0.75
Abstract · 26 pages, 30 figures, 14 tables. Project page: https://ian-chuang.github.io/dexsafe/

Dexterous manipulation with multi-fingered hands is the next frontier of robotics, yet learned hand skills remain limited to simple grasps or basic repeated motions, such as rotating an object. As robots attempt more demanding in-hand maneuvers, safety, such as not dropping the object, becomes critical, yet it is rarely measured. We study in-hand object pose reaching, a task that demands diverse and difficult grasps: moving an object to almost any position and orientation within reach of the fingers, at any wrist orientation, through long sequences of consecutive goals. We present a recipe for training such policies for a LEAP hand in simulation without human data, built on a range of insights, from diverse resets and goals via generated grasp datasets to an adaptive friction curriculum. With careful system identification, the policies transfer zero-shot to the real hand, using either motion capture or a single wrist-mounted depth camera, and prove remarkably capable and robust. On top of the task policy, we add a learned residual safety filter with adjustable conservativeness, letting us tune the balance between performance and safety and greatly reduce object drops. In 13.3 hours of real-robot evaluation over 4,800 unseen goals across 4 objects and diverse wrist orientations, the state-based policy reaches 95.2% of goals within 2 cm and 0.4 rad, and the filter cuts its drops by 75% while still reaching 91.5% of goals. The policies can also spin a lightbulb held in an arbitrary pose, reach out-of-distribution goals, withstand fast arm motion and perturbations, and, needing only a wrist camera, serve as portable skills such as screwing in a lightbulb. We release the full recipe as a platform for studying performance, reliability, and safety in high-dimensional dexterous systems. Videos and more are available at https://ian-chuang.github.io/dexsafe/.

0.25

OATH: Object-Agnostic Tracking for Dexterous Hands, Enabling Rapid Physics-based Retargeting

cs.RO ·2026-10-09 ·Solvin Sigurdson, Prasanna Sriganesh, Juan Borbon, Joel Burdick, Dingqi Zhang +1 more
code/data similarity 0.75
Abstract · 8 pages, 7 figures, 3 tables. Project page: https://multiplylabs.github.io/oath/

Retargeting human demonstrations into dynamically feasible dexterous hand trajectories requires resolving complex contact physics, yet current methods either omit physical constraints or rely on computationally expensive sampling-based optimization in simulation. Reinforcement learning has previously been used to achieve planning and control through contact dynamics; however, standard policies require object-specific training and fail to generalize across arbitrary geometries. This work reframes physics-based retargeting as a residual learning problem, where we demonstrate that zero-shot generalization across objects relies on structured state representations. Specifically, formulating the observation space to include a localized contact-error signal guiding each robot link to its target coordinate on the object surface enables a single, unified residual policy to successfully grasp novel, unseen object geometries. Rolling out this policy in simulation on a kinematic reference trajectory yields a physics-based retargeter, OATH. Operating at 0.4 seconds of compute per second of reference, OATH achieves 2.4x faster-than-real-time performance and a 60-350x reduction in computational cost compared to sampling-based methods. The system recovers 58% of held-out and 54% of unseen-object DexYCB trajectories while maintaining a sub-2 cm tracking error.

0.29

PiHand: Latent Hand-Object Interaction Priors for Physics-Based Policy Learning

cs.CV ·2026-10-22 ·Niklas Berndt, Xianghui Xie, Enes Duran, Yixiao Wang, Gerard Pons-Moll
code/data similarity 0.75
Abstract · Project page: https://virtualhumans.mpi-inf.mpg.de/PiHand/

Synthesizing physically grounded dexterous hand-object interactions is important for VR/AR, gaming, and robotics, yet remains challenging because subtle contact dynamics, diverse object geometries, and target trajectories must be jointly respected while maintaining natural grasps. Existing methods either track mocap trajectories with limited transfer to novel objects, or rely on hand-only generative priors that fail to capture coupled hand-object motion, sacrificing contact fidelity and sample efficiency. To tackle these challenges, we introduce PiHand, a Physically grounded Interaction-aware Hand motion synthesis framework. PiHand first trains expert policies that track mocap demonstrations in simulation, distills them into a unified hand-object interaction prior using a goal-conditioned VAE, and finally solve diverse dexterous manipulation tasks through bounded residual exploration in its latent space. With only a single reward and no complex curriculum training, this yields general tabletop manipulation policies that generalize to unseen objects and trajectories on GRAB and DexYCB. The same prior transfers to object catching and bimanual handover, two tasks that are rarely seen in its training data. Across all tasks, PiHand consistently outperforms baselines in all metrics. We will release the processed data and model checkpoints.

0.24

Iterative Grasp Pose Refinement: A Deep Reinforcement Learning Approach for 2D Vision

cs.RO cs.AIcs.LGeess.IV ·2026-08-18 ·Amir Arsalan Nematollahi, Shayan Ahmadi, Mehdi Tale Masouleh, Ahmad Kalhor
similarity 0.75
Abstract

Developing robots capable of understanding and manipulating objects requires compact, interpretable, and generalizable representations. This work proposes a reinforcement learning-based framework for robotic grasp refinement, integrating keypoint-based object representations with a Deep Q-Network (DQN). Using 2D overhead images captured in a simulated environment, a geometric-based algorithm generates initial grasp candidates, which are iteratively refined by the proposed framework, transforming failed grasps into successful ones. Experiments conducted on 300 objects from the Dex-Net dataset using a UR5 manipulator demonstrate the framework's effectiveness, achieving a 100% success rate on objects previously deemed ungraspable by geometrical methods. The framework's sim-to-real transferability is further validated through physical experiments on a Delta parallel robot, where a refined grasp successfully manipulates an object that was previously ungraspable. The findings underscore the effectiveness of reinforcement learning in addressing challenges in robotic grasping, offering a scalable and adaptable solution for contact-rich manipulation tasks.

0.22

Continual Learning for 6-DoF Grasp Synthesis via Experience and Demonstrations

cs.RO cs.LG ·2026-10-01 ·Giulio Schiavi, Andrei Cramariuc, Michael Pantic, Roland Siegwart
published similarity 0.75
Abstract · Accepted to CoRL 2026

Most current grasp synthesis systems are trained offline and remain fixed during deployment. While this works well when deployment conditions resemble the training data, performance can degrade when robots encounter conditions they have not seen before, such as unfamiliar objects. In this work, we present a continual-learning framework for single-view 6-DoF grasp synthesis for a parallel-jaw gripper in cluttered scenes. Rather than finetuning a large parametric model, our method adapts through memory in a learned embedding space: grasp outcomes update future grasp scores, while optional user demonstrations are recalled and transferred to new scenes as additional candidate grasps. We evaluate our method in simulation and in extensive real-world experiments comprising over 1500 grasp trials. We show that our method matches the performance of existing 6-DoF grasping baselines even before adaptation, improves online on unseen objects from categories absent or underrepresented during training, and supports long-horizon continual learning with limited forgetting. In real-world experiments, our method reaches over 90\% success rates on several challenging object categories after only 50 online grasp attempts. Videos and code at https://giuschio.github.io/cl_grasping/.

0.36