CS Paper Radar

Combating Suppressive Jamming with Dynamic Agile Reconfigurable Intelligent Surface Antenna Array (DARISAA)

Yakun Ma, Qingli Yan, Hui-Ming Wang

eess.SP ·submitted 2026-09-13 13:34 UTC · v1
top venue

Abstract

Suppressive jamming is a severe challenge to digital receivers in wireless communications, since high-power jamming may cause analog-to-digital converter (ADC) overload or automatic gain control (AGC)-limited quantization blocking of weak desired signals. Analog beamforming in the spatial domain can be employed to combat suppressive jamming signals before they reach the ADC. In this paper, we introduce a comprehensive anti-jamming scheme considering both direction-of-arrival (DoA) acquisition and suppressive jamming elimination based on a Dynamic Agile Reconfigurable Intelligent Surface Antenna Array (DARISAA). DARISAA is a novel type of reconfigurable antenna array composed of many metamaterial elements, which can dynamically adapt its phase responses, enabling suppressive jamming cancellation at the antenna-end. Accurate DoA estimation schemes for jamming and desired signals are proposed based on a subspace approach by utilizing the dynamic agility of the DARISAA. By leveraging the spatial-domain preprocessing capability of DARISAA and the digital beamforming of the multi-channel receiver, an analog (antenna)-digital hybrid anti-jamming scheme is developed to effectively suppress high-power jamming and significantly improve the signal-to-interference-plus-noise ratio (SINR) even with low-resolution ADCs. Simulation results demonstrate that the proposed comprehensive anti-jamming scheme achieves significant SINR enhancement, highlighting the advantages of DARISAA-enabled spatial front-end processing for jamming suppression.

Closest papers

Nearest neighbours by meaning across the whole index.

Movable Antenna Enabled Anti-Jamming: From Local Optimality Guaranteed Design to a Unified Antenna Position Optimization Framework

eess.SP cs.IT ·2026-10-26 ·Lebin Chen, Ming-Min Zhao, Lipeng Zhu, Zhenyu Xiao, Min-Jian Zhao +1 more
similarity 0.62
Abstract · 13 pages, 4 figures

Anti-jamming capability is of paramount importance in modern wireless communications, yet conventional receivers are severely constrained by their fixed array geometries, which limit the available spatial degrees of freedom and leave performance highly susceptible to strong interference. By contrast, movable antennas (MAs) provide additional spatial degrees of freedom through antenna-position optimization. This paper investigates MA-enabled anti-jamming by jointly optimizing the antenna-position vector (APV) and receive beamformer to maximize the output signal-to-interference-plus-noise ratio (SINR). For the canonical setting with a single jammer and a single line-of-sight (LoS) propagation path on the legitimate link, we develop a damped projected-gradient descent (DPGD) algorithm with low computational complexity, which scales linearly with the number of receive MAs. We establish a generic active strict-saddle landscape for the resulting steering-coherence minimization problem and prove that DPGD converges almost surely to a local minimizer rather than merely to a Karush-Kuhn-Tucker (KKT) point. For the general setting with multiple channel paths on the legitimate link and/or multiple jammers, we derive an equivalent ridge least-squares formulation and develop a low-complexity soft-active projected-gradient (SAPG) algorithm, which also scales linearly with the number of receive MAs. We further show that the proposed antenna position optimization framework applies to both minimum variance distortionless response (MVDR) and zero-forcing (ZF) reception. Numerical results validate the proposed algorithms, demonstrating substantial gains in both anti-jamming performance and computational efficiency.

0.33

Cramér-Rao Bound Optimization for Joint Beamforming and Mode Selection in RDARS-Assisted ISAC Systems

eess.SP ·2026-10-01 ·Ahmad Reza Hassanshahi, Rouhollah Amiri, Fereidoon Behnia
benchmark similarity 0.54
Abstract

Integrated Sensing and Communication (ISAC) is a foundation of 6G networks, demanding architectures that simultaneously enhance sensing accuracy and communication reliability. This paper presents a Reconfigurable Distributed Antenna and Reflecting Surface (RDARS) aided ISAC framework, where an RDARS overcomes the limitations of conventional passive Reconfigurable Intelligent Surfaces (RIS) and Distributed Antenna Systems (DAS). By enabling each element to dynamically operate in either \textit{reflection} or \textit{connection} mode, RDARS synergistically harnesses reflection gain, distribution gain, and an additional mode-selection gain. We investigate the joint optimization of transmit beamforming at the base station and dynamic mode selection at the RDARS to minimize the sensing performance metric, namely the Cramér-Rao Bound (CRB) for target localization, while guaranteeing a minimum required Signal-to-Interference-plus-Noise Ratio (SINR) for multiple communication users. To solve the resulting non-convex and mixed-integer problem, we develop an efficient iterative algorithm based on the Alternating Optimization (AO) framework, effectively leveraging Majorization-Minimization (MM) and Penalty methods. Comprehensive simulations validate the proposed design, demonstrating that the dynamic RDARS configuration achieves a superior trade-off between the Position Error Bound (PEB) and communication SINR, significantly outperforming benchmark passive RIS and DAS systems.

0.10

Robust DOA Estimation for GNSS-like Signals Under Jamming: A Rotation-Enhanced SWN-MUSIC Approach

eess.SP ·2026-11-17 ·Jiyao Jiang, Xiaowei Cui, Gang Liu, Sihao Zhao, Mingquan Lu
similarity 0.53
Abstract

In jamming environments, accurate direction-of-arrival (DOA) estimation for Global Navigation Satellite System (GNSS)-like signals using antenna arrays is crucial for spoofing detection and subsequent countermeasures. However, estimation accuracy strongly depends on the incident direction of the signal of interest (SOI) under a given jamming and array configuration, with severe errors occurring in certain directions---a phenomenon whose physical mechanisms remain unclear. To address this gap, we identify two types of geometric ill-conditions between the array manifold and the jamming subspace, clarifying that certain directions suffer from inherently unfavorable observation geometry, which cannot be overcome by algorithmic refinement alone. Motivated by this insight, we introduce a paradigm namely rotational diversity, which treats the array attitude as a controllable sensing resource to actively reconfigure the observation geometry, thereby providing complementary perspectives in which the problematic directions can be accurately estimated. To implement this paradigm, we develop a Rotation-Enhanced Spatial Whitening and Normalized Multiple Signal Classification (SWN-MUSIC) framework, which performs independent DOA estimations across multiple rotation angles and selectively integrates reliable estimates. Simulation results demonstrate substantial improvement in accuracy in the directions that were poorly estimated under the fixed-array SWN-MUSIC, while maintaining performance in well-conditioned directions, thereby producing more robust DOA estimates.

0.27

Characterization of Beam-Squint and Beam-Split Effects in RIS-assisted Multi-Frequency Networks

eess.SP ·2026-09-07 ·Mohammad Amin Saeidi, Hina Tabassum
top venue similarity 0.53
Abstract · This paper has been accepted for publication in IEEE journals

Multi-frequency operation in beyond-5G and 6G systems renders the beam directions of large-aperture arrays frequency-dependent, giving rise to beam misalignment effects critical for reconfigurable intelligent surfaces (RISs). When an RIS phase profile is configured at one frequency but illuminated at another, the reflected field may exhibit main-lobe deviation and additional dominant lobes, degrading beamforming performance. In this paper, we develop a unified analytical framework to characterize these effects for uniform planar array-based RISs under both continuous and finite-resolution phase control. We formalize beam-squint as the deviation of the maximum-gain beam from the desired elevation-azimuth angle pair and beam-split as the emergence of additional maximum-gain beams under frequency mismatch and quantization. For continuous-phase RISs, we derive necessary and sufficient peak conditions, obtain closed-form elevation-azimuth peak families, and establish feasibility conditions as functions of the frequency ratio, incidence and configuration angles, and element spacing. Extending the analysis to b-bit phase quantization, we express the quantized beampattern as a superposition of harmonic array responses via Fourier expansion of the quantization-error phasor, leading to closed-form per-harmonic peak families, dominance ordering, and feasibility conditions. To capture peak displacement induced by harmonic superposition, we further develop a perturbation-based correction leveraging dominant-harmonic curvature and residual-harmonic gradients, improving peak-location accuracy without exhaustive two-dimensional searches. Numerical simulations validate the analysis, quantify peak deviations and beam-split probabilities, and demonstrate sum-rate gains by including analytically predicted squinted/split and harmonic candidates in multi-RIS, multi-user, multi-band networks.

0.44

Scalable High-Precision Near-Field Channel Parameter Estimation via Spatial Chirp Structure

eess.SP ·2026-09-17 ·Lin Chen, Xiaojun Yuan, Ying-Jun Angela Zhang
similarity 0.53
Abstract

This paper presents a scalable framework for high-precision near-field multipath channel parameter estimation in extremely large antenna array (ELAA) systems, enabling joint recovery of path number, path gains, angles, and ranges from a single noisy observation. The key idea is to interpret the near-field multipath channel as a superposition of spatial chirp components with spatially varying frequencies and exploit this structure through a partitioned ELAA architecture. Specifically, we establish a Chirp-coupled Subarray Far-field (CSF) model, where each near-field path is locally represented as a far-field sinusoid with a constant spatial frequency within each subarray, while these local spatial frequencies are coupled across subarrays through a linear relationship induced by the underlying spatial chirp, forming a path-specific chirp trajectory. Based on this model, we propose the CHirp-coupled Angular-Range estiMation (CHARM) algorithm, which performs gridless local frequency estimation followed by cross-subarray trajectory recovery. To mitigate the potential modeling mismatch of the CSF model, we further propose the enhanced CHARM (E-CHARM) algorithm, which refines the CHARM estimate under the near-field channel model through maximum likelihood. The computational complexity of the proposed algorithms scales linearly with the array size. Moreover, simulation results show that the proposed algorithms achieve reliable path-number detection, high-precision angle-range estimation, and accurate channel reconstruction.

0.16

Two-Stage Refinement Sparse Channel Estimation for Reconfigurable Intelligent Metasurface Antenna (RIMSA) Massive MIMO

cs.IT ·2026-09-19 ·Yakun Ma, Hui-Ming Wang, Jiaping He, Qingli Yan
top venue similarity 0.53
Abstract

To meet the increasing demands for high data rates and large capacity, next generation wireless communication systems require transceivers equipped with a large number of antennas. Massive multiple-input multiple-output (MIMO) with metasurface antennas has emerged as a promising solution. In this paper, we investigate the channel estimation problem for the emerging reconfigurable intelligent metasurface antenna (RIMSA) array systems. Specifically, we develop a two-stage refinement (TSR) channel estimation method based on the compressed sensing (CS) principle. In the first stage, we exploit the antenna structure of RIMSA to receive pilots by setting identical phase response vectors across all RIMSAs. In this manner, the coherence of the measurement matrix under the CS framework is reduced and the channel estimation performance is improved. However, this special design introduces channel direction-of-arrival (DoA) estimation ambiguity and yields an ambiguous candidate DoA set. In the second stage, we optimize the phase responses of the metamaterial elements to resolve the ambiguity and accurately estimate the DoAs and channel coefficients. Overall, the estimation accuracy is improved in the first stage at the cost of ambiguity, and this ambiguity is eliminated in the second stage. We illustrate the performance advantages of the TSR method by presenting the numerical results and comparing it with the existing methods.

0.28

Blind Interference Suppression for IRS-Aided Robust Wireless Communications

eess.SP ·2026-09-30 ·Tao Wang, Xiaohui Zhang, Hehe Ban, Yiwei Guo, Ming Yi
publishedbenchmark similarity 0.52
Abstract · 13 pages, 13 figures, accepted by IEEE Internet of Things Journal

The application of intelligent reflecting surfaces (IRSs) to suppress interference in wireless communication systems has recently attracted significant research attention. Most existing approaches rely on complete or partial channel state information (CSI) to configure the IRS. However, acquiring accurate CSI in IRS-assisted systems involves considerable pilot overhead and introduces non-negligible delays. This issue is further exacerbated under strong interference conditions, where interfering sources are typically non-cooperative, making CSI acquisition even more challenging. As a result, existing CSI-dependent interference suppression methods become difficult to deploy in practice. To address these limitations, we propose a novel blind interference suppression strategy that combines a proportional phase-inversion (PPI) algorithm with the conditional sample mean (CSM) method. The proposed approach determines the IRS configuration using only the received signal power, without requiring any prior CSI. We conduct a comprehensive performance evaluation by deriving the theoretical performance of the proposed scheme, which is subsequently verified through numerical simulations. Furthermore, simulation results across various parameter settings demonstrate that the proposed blind interference suppression scheme reduces the interference power to the level of noise, thereby achieving a marked signal-to-interference-plus-noise ratio (SINR) improvement and outperforms existing benchmark schemes.

0.72

Properties of Array Factor of Reconfigurable Intelligent Surfaces for Radio Communications

eess.SP cs.IT ·2026-10-12 ·Symeon Vaidanis, Athanasios D. Panagopoulos
published similarity 0.52
Abstract · This work has been accepted for publication in 2024 IEEE INC-USNC-URSI Radio Science Meeting (Joint with AP-S Symposium)

This paper delves into the intricate aspects of Reconfigurable Intelligent Surfaces (RIS) in the antenna design. It investigates the properties of the array factor of RIS, highlighting the significance of phase shifts in establishing of the reflect path. Additionally, the paper investigates spatial positions requiring identical phase shifts, nullification of the array factor, the count of total maxima, second maximum determination (amplitude of the second lobe), and the calculation of the 3dB bandwidth. They are very useful for RIS-assisted radio communication systems.

0.40