CS Paper Radar

Prescreening Point Defects in Semiconductors With Machine Learning

Paul Karlsson, Joel Davidsson, Rickard Armiento

cs.LG cond-mat.mtrl-sci ·submitted 2026-09-13 23:41 UTC · v1

Abstract

High-throughput calculations using density-functional theory (DFT) are commonly used to explore point defects for applications in power electronics and quantum technologies. There is currently a major shift away from these traditional simulation techniques towards machine learning (ML) methods. We explore a class of physics-guided ML models for predicting defect formation energies and zero-phonon lines (ZPL) to identify point defects for quantum applications. The models are specifically targeted for use in a prescreening step for accelerated high-throughput workflows, and are therefore designed to avoid the costly relaxation step typically present with ML interatomic potentials (MLIPs). We compare performance for single and double point defect systems in 4H-SiC with ridge, kernel ridge, and multilayer perceptron (MLP) models using three different descriptors representing the defect systems. For vacancies and substitutions, the optimized models give mean absolute errors (MAEs) of 0.437 eV for the formation energy and 0.202 eV for ZPLs, which is just above the level at which such predictions can be useful even beyond the targeted prescreening, i.e., in some applications they may completely replace the need for costly DFT calculations. For interstitials the MAEs are larger, 1.101 eV for the formation energy and 0.230 eV for the ZPL, which, while still useful for prescreening, will not generally be useful for more detailed characterization. Hence, while the results may be further improved by model design and optimization, the models presented in this work are already useful for prescreening in high-throughput characterization of point defects.

Comment
14 pages, 4 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Efficient Machine Learning Interatomic Potentials

cs.LG cond-mat.mtrl-sci ·2026-11-17 ·Yury Lysogorskiy, Anton Bochkarev, Ralf Drautz
benchmark similarity 0.61
Abstract

Machine learning interatomic potentials (MLIPs) reach an accuracy close to quantum mechanical reference calculations at a small fraction of the cost. Efficiency is the purpose of MLIPs, yet strategies for efficient MLIPs have not been reviewed systematically. This review takes efficiency as its guideline. To compare MLIPs on a common footing, we represent them in a complete basis expansion, the Atomic Cluster Expansion (ACE) and its graph generalization (GRACE). The expansion is canonical, built from products of single-particle functions. Classical interatomic potentials, such as the embedded-atom method, and many modern MLIPs, including equivariant transformers, can be represented within this expansion. Much of the apparent diversity of MLIP architectures therefore reflects how non-linearity, layer coupling and optimization are handled rather than which interactions the models can represent. We show how the cost of an MLIP becomes linear in system size and, at fixed rank of the tensor decomposition, in model complexity, and we discuss the role of machine learning, which provides non-linear parameterizations and optimization. Because efficiency is meaningful only at a given accuracy, we also compare accuracy and cost. On the Matbench Discovery leaderboard, models with three to five layers approach the accuracy of deeper models, and one basis, truncated along the Pareto front of error and speed, spans more than two orders of magnitude in cost. Ultimately, training data determine the quality of any MLIP.

0.20

AI and TCAD for Inverse Design and Defect Discovery: From Simple Machine Learning to LLM

cs.LG ·2026-09-07 ·Hiu Yung Wong
similarity 0.60
Abstract

AI has revolutionized various engineering domains, but its impact on semiconductor device design and defect discovery is still limited, due to limited data and the curse of dimensionality. In this paper, we will discuss our work on using the Technology Computer-Aided-Design (TCAD) to generate precise data needed for machine learning (ML) to enable simulation-augmented ML. We demonstrate that with minimal domain expertise, it is possible to create a machine that performs as well as a device engineer on a specific task. We will show that auto-encoder-based machine learning models and noise engineering applied to TCAD data are effective at learning latent physics, and that the models can be seamlessly applied to experimental data. We will demonstrate how to build a device-engineer-level model step by step through various examples, including using only non-destructive electrical data to inverse-engineer the PiN diode layer thickness variations, the Ga2O3 Schottky diode doping and anode workfunction variations, and the transistor contact resistance in an inverter. Examples also include the generation of a FinFET IV/CV prediction model, the mapping between transistor images and IV curves, and the automatic calibration of TCAD parameters for a Ga2O3 Schottky diode, which can only be handled well by experienced TCAD engineers. Finally, to fully realize the potential of AI, large language models (LLMs) and multimodal LLMs (MLLMs) are believed to be necessary. We will discuss the application of LLMs to TCAD command file creation and our vision for MLLMs in automated device design and defect discovery.

0.50

Ab initio Modeling of MoS2/Oxide Device Interfaces with Machine Learned Electronic Structures

cs.LG cond-mat.mtrl-sci ·2026-08-27 ·Manasa Kaniselvan, Mauro Dossena, Denghui Lu, Alexander Maeder, Nicolas Vetsch +2 more
similarity 0.58
Abstract

We introduce a new ab initio approach to simulate semiconductor devices that integrates scalable machine-learned (ML) electronic structure models with an advanced quantum transport (QT) solver. The developed framework enables 10,000X speedups over density functional theory to produce the Hamiltonian matrix of devices made of >20,000 atoms, while offering high prediction accuracy. We use its unique features to investigate MoS2/oxide samples and single-layer MoS2 field-effect transistors, where the surrounding oxide layers, here, HfO2 or Al2O3, are explicitly included into the QT domain. In particular, we reveal that the presence of undercoordinated metal atoms (Hf or Al) close to the semiconductor-oxide interface significantly affects the magnitude of the electronic current and its propagation through MoS2.

0.25

A Unified Physics-Aware Quantum Machine Learning Framework across Power GaN HEMTs and Logic Nanowire FETs: Predicting Unseen Process Splits and Held-Out Geometry Combinations with Lower Error and Tighter Split-to-Split Variability

cs.AI ·2026-09-04 ·Rushat Rai, Yun-Yuan Wang, Autsada Kakaen, Pei-Jie Chang, Doan Viet Nguyen +8 more
similarity 0.57
Abstract · 11 pages, 11 figures

We present a unified reinforcement-learning (RL) framework that discovers compact parametrized quantum circuits (PQCs) for data-scarce device modeling. A graph neural network (GNN) policy optimized by proximal policy optimization (PPO) searches circuit architectures using leave-one-group-out cross-validation (LOGOCV) error on held-out process or geometry groups as the reward. The framework achieves the lowest mean absolute error (MAE) on all 11 targets versus six classical baselines, with 59% lower error (Ioff) and 81% tighter fold variability (VTH) for HEMTs and 84% lower error (VTH, SS, Ioff) and 82% tighter fold variability (Ioff) for NWFETs. These results demonstrate the potential of RL-selected, classically simulated PQCs as compact surrogates with low OOD error and improved physical consistency, despite imposing no explicit physical constraints, penalty terms, or device-specific equations, on the two evaluated device datasets.

0.27

Cross-Temperature Defect Identification in Atomistic Simulations via Multi-Level Domain Alignment

cs.LG cond-mat.mtrl-sciphysics.comp-ph ·2026-08-22 ·Yating Fang, Jungmin Kim, Qian Qian Zhao, Pallavi Biswas, Joshua M. Gonjon +2 more
similarity 0.55
Abstract · 46 pages, 8 figures

Identifying atomic defects at elevated temperature is difficult because thermal fluctuations blur the local symmetry that both geometric heuristics and supervised classifiers rely on: trustworthy labels exist in low-temperature reference configurations, while the high-temperature regime where robust analysis matters most is effectively unlabeled. We cast this as a cross-temperature domain-shift problem and align the two domains at three levels: an equivariant denoiser at the input level, cross-temperature contrastive learning at the representation level, and a morphology-aware regularizer that steers predictions toward the compact geometry of physical defect structures. Because no atom-wise truth exists at temperature, we further introduce a label-free evaluation suite that scores predicted defect structures along five spatial and physics-based axes, enabling model assessment and selection without high-temperature labels. Near the melting point, the framework identifies vacancies and self-interstitial atoms across face-centered-cubic, body-centered-cubic, and hexagonal-close-packed iron systems with every interstitial localized and zero false detections in every vacancy system against Wigner-Seitz ground truth, with no high-temperature labels used in training. It sustains this fidelity on a million-atom, 2.5 ns trajectory, resolving single vacancy hops and complete Frenkel-pair recombination, and captures grain-boundary phase transformations in aluminum bicrystals, distinguishing two nucleation modes. Multi-level domain alignment thus offers a practical, label-efficient route to temperature-robust structural analysis of large-scale molecular dynamics.

0.29

ASPIRE: Saddle-Point Discovery through Set Prediction and Physical Refinement

cs.LG ·2026-10-07 ·Yucheng Zhao, Quanyou Zhang, Shaoxiang Qin, Haixuan Xu, Xiongye Xiao
benchmark similarity 0.55
Abstract

Predicting thermally activated diffusion and defect evolution with event-driven models requires identifying atomic rearrangement mechanisms and their activation barriers. Discovering the associated saddle points is a major computational bottleneck: multiple rearrangements may originate from one metastable state, while costly local searches can fail or repeatedly converge to the same saddle. To address this challenge, we introduce ASPIRE (Atomistic Saddle-Point Inference with Refinement for Events), a framework that predicts a set of saddle candidates from a single initial atomic environment and refines them through Dimer searches on the original interatomic potential. The framework's equivariant set predictor, Ev-Quiformer, integrates (i) geometry-conditioned scalar-vector event slots for generating multiple saddle-point proposals and (ii) a decoder that maps each slot to a full atomic displacement field by combining atom, slot, and anchor-relative vectors with invariant coefficients. We also contribute two datasets: (i) BCCFE4VACAV-4000, comprising 4,000 four-vacancy body-centered cubic iron configurations and 65,450 reference events grouped by initial state for set supervision and post-refinement evaluation; and (ii) BCCFE-1TO4VAC, comprising 5,372 configurations with one to four vacancies each. Theoretically, we establish conditions for proposal equivariance. Experimentally, ASPIRE achieves 77.20% reference-event coverage on this benchmark, compared with 75.73% for a conventional Dimer baseline, while requiring approximately half as many Dimer force evaluations. In a timing evaluation on 50 configurations, ASPIRE reduces wall time per configuration from 478.8 s to 176.3 s under the stated hardware settings.

0.29

Equivariant Flow Matching for Electron Density Prediction

cs.AI physics.chem-ph ·2026-10-02 ·Chenxing Liang, Chengdong Wang, Yuchao Lin, Xiaofeng Qian, Shuiwang Ji
benchmark similarity 0.55
Abstract

Machine learning surrogates for density functional theory (DFT) have been increasingly used to reduce the cost of first-principles calculations. In this arena, predicting real-space electron densities offers a scalable and transferable initialization for self-consistent field (SCF) procedures. However, current methods face a clear dilemma. That is, grid-based architectures incur a high computational cost, while basis-set methods fail to capture the structural correlations inherent in the coefficient space. Here, we develop OrbFlow, an $\mathrm{SE}(3)$-equivariant generative model that predicts Gaussian-type orbital (GTO) coefficients via flow matching. OrbFlow retains the efficiency of a compact atom-centered basis while replacing pointwise regression with a learned probability path over the full coefficient space. It is trained through a two-phase trajectory curriculum that mitigates discretization drift during numerical integration. OrbFlow achieves state-of-the-art accuracy on QM9, reducing density error by 13.6% relative to the previous best model, and reduces error by 51% to 63% on every molecule of the MD benchmark relative to the strongest prior method sharing its basis. The predicted density also cuts SCF iterations by up to 68% with zero-shot transfer to unseen exchange-correlation functionals and recovers dipole and quadrupole moments to within a few percent of DFT references without any SCF calculation.

0.17

Transformer-inspired architectures make machine-learned electron densities accurate and transferable enough to bypass self-consistency

cs.LG physics.chem-phphysics.comp-ph ·2026-10-29 ·Jeheon Woo
similarity 0.55
Abstract · 36 pages, 4 figures, 2 tables; Extended Data (4 figures, 2 tables) and Supplementary Information included

We introduce machine learning models that accurately predict the electron density, the central variable of density functional theory. They are built on Transformer-inspired architectures, which require little computation per parameter and can therefore be enlarged at low cost. The proposed models, SwinUNETR-V2 and its attention-free counterpart NeXtUNETR, achieve state-of-the-art accuracy on QM9, with normalized mean absolute errors in the density averaging 0.075% and 0.046%, respectively. The predicted densities are accurate enough to bypass the self-consistent iteration: a single Kohn-Sham step reproduces the self-consistent electronic structure. For NeXtUNETR, the median errors are 0.036 meV in the total energy, 0.65 meV/angstrom in the forces and 1.8 meV in the HOMO-LUMO gap. The forces not only recover the self-consistent minima in geometry optimization but also successfully drive ab initio molecular dynamics. Fine-tuned on small datasets, both networks also transfer accurately to systems containing elements absent from QM9 or larger than its molecules.

0.11