CS Paper Radar

Comparing Trajectories from Positions Alone: Curvature-Based Time Alignment and Drift Error Metric

Effie Daum, Daniele De Martini, Claire Dune, François Pomerleau

cs.RO ·submitted 2026-09-14 02:30 UTC · v2

Abstract

In field robotics, acquiring independent large-scale reference trajectories more accurate than the evaluated estimates remains an open challenge. The domain is widely reliant on Absolute Trajectory Error (ATE) and Relative Pose Error (RPE), computed with automated tools, that rest on assumptions and evaluation parameters rarely made explicit. When unreported, the errors can be misleading and hinder fair comparisons. This paper introduces a trajectory-evaluation protocol for standardized and reliable accuracy assessment in state estimation, localization, and Simultaneous Localization And Mapping (SLAM). The approach combines a novel temporal alignment method based on curvature signals with an error metric normalized by travelled distance. We explicitly account for temporal synchronization, sampling alignment, and extrinsic calibration, quantifying their influence through a sensitivity analysis. The proposed protocol contributes to more rigorous, reproducible, and standardized trajectory evaluation.

Closest papers

Nearest neighbours by meaning across the whole index.

Odometer-Agnostic Drift Correction Using OpenStreetMap Lane Geometry

cs.RO ·2026-09-09 ·Joaquin Caballero, Emilio Garcia-Fidalgo, Alberto Ortiz, Jarno Ralli
top venuecode/data similarity 0.64
Abstract · Accepted for publication in IEEE Robotics and Automation Letters (RA-L), 2026

Despite significant progress in odometry estimation, long-term drift remains a fundamental limitation of incremental pose integration, especially in large-scale or loop-free environments. Existing map-assisted methods can reduce drift, but often depend on dense maps, sensor-specific processing, or complex matching pipelines. We propose a lightweight open-source, odometry-agnostic correction method that aligns short trajectory segments to OpenStreetMap (OSM) lane centerlines. By formulating drift correction as a direct alignment between recent odometry and sparse lane geometry, the method enables efficient online operation without dense priors or expensive preprocessing. Experiments with LiDAR and visual odometry backends demonstrate consistent improvements, with particularly strong gains under severe drift.

0.57

Polarity--Time Interaction and Multi-Level Reliability for Event-Based Spacecraft Pose Estimation

cs.AI cs.RO ·2026-10-27 ·Yonglong Zhang, Zongwu Xie, Yang Liu
similarity 0.63
Abstract

Sparse event responses produce uneven keypoint errors whose effects on spacecraft pose depend on correspondence geometry and the reliability of successive observations. We present a reliability-aware framework connecting polarity--time localization, geometric recovery, event--CAD refinement, and trajectory optimization. A three-branch representation combines positive events, negative events, and recent-event timing through cross-branch attention and gating, followed by spatiotemporal aggregation. An ordered semantic-point head estimates relative correspondence precision for geometrically constrained pose recovery. Event-edge and CAD-projection agreement then guide local pose refinement under keypoint-geometry safeguards. At the sequence level, a ten-dimensional descriptor combines heatmap shape, reprojection consistency, and geometric conditioning to set time-aligned observation scales. On the official SPADES challenge test set, the complete system achieves a combined pose score of 0.0474, approximately 5.4\% below PASAN+IRIS. Validation ablations reduce the score from 0.0772 for base localization with uniform PnP to 0.0514 for the complete cascade; on identical single-frame observations, quality weighting reduces the score from 0.0549 with constant-weight optimization to 0.0514.

0.23

Fast Pose Tracking of Rigid Objects with Compact Pose Graph Optimization

cs.CV ·2026-10-08 ·Xiaojie Zhang, Tom Fischer, Viktor Larsson, Eddy Ilg
similarity 0.63
Abstract

Tracking a novel object's 6D pose over long horizons currently requires either expensive onboarding or a reconstruction maintained throughout the sequence. This makes current trackers impractical for robotic manipulation and augmented reality, which need trackers that are ready to use and run in real time. We show that a lightweight tracking module can be applied on top of a wide range of correspondence estimation methods to keep drifts bounded while maintaining fast runtime. Our key idea is to avoid point-based optimization in the pose graph and operate only on relative pose constraints, which we weight by a derived uncertainty from the geometric alignment. This makes optimization independent of the number of correspondences while avoiding the direct inclusion of noisy point measurements, leading to fast and robust long-term tracking. Across four real-world benchmarks, our approach achieves tracking accuracy comparable to reconstruction-based trackers with a fraction of the optimization cost. Overall, these results suggest that a compact and reliable pose graph optimization can provide long-horizon consistency at substantially lower computational cost.

0.13

Radio-to-Pose Information for Gauge-Drift Correction in Cooperative Localization

cs.RO cs.MA ·2026-11-05 ·Aditya Iyer, Andy Ye, Akshay Narayan, Nora Ayanian
similarity 0.62
Abstract

Cooperative localization uses odometry and inter-robot measurements to estimate the motion of a robot team. These measurements describe only relative geometry, but the team's estimated position and orientation can drift together over time, i.e., gauge drift. In this work, we study correction of this gauge drift using a radio attenuation map registered in the same world coordinate frame used for robot poses. Specifically, we propose Radio-to-Pose Information (RPI), an interface that converts power residuals and their pose derivatives into a Gaussian information matrix and vector pair. RPI builds on the insight that received power is sensitive to shared displacement in the world map. The pose estimator uses the interface together with odometry and inter-robot measurements to update poses and minimize uncertainty. We characterize the shared motions detectable from the map and observed links. For an uncertain shared map, RPI keeps correlations across robots and time and reproduces joint Gaussian pose estimates and covariances. Across $1000$ simulated Gaussian trials, RPI matches the results of joint estimation. Across 32 paired trials with a registered map, RPI reduces common-position RMSE from $0.542$m to $0.140$m in a $50\times50$m arena compared with a baseline that uses radio only to weight relative measurements.

0.17

A Tightly Coupled Magnetic-Inertial SLAM System for Field Robots

cs.RO eess.SP ·2026-11-02 ·Chuan Huang, Tongxing Peng
similarity 0.62
Abstract

Field robots operating in mines, tunnels, and disaster areas require reliable localization despite GNSS denial and degraded camera and LiDAR measurements caused by dust, smoke, or poor illumination. Missions involving both ground and aerial robots further motivate complementary sensing modalities that do not depend on visibility, preinstalled infrastructure, or wheel contact. This letter presents MISLAM, a tightly coupled magnetic-inertial simultaneous localization and mapping system using an IMU and a nine-magnetometer array, without relying on external odometry or platform-specific motion assumptions. The system combines the inertial navigation model with local polynomial magnetic-field models for short-term motion estimation and a global Gaussian process model for drift correction using an error-state Kalman filter. Offline evaluation on three indoor datasets collected with a handheld rig shows reductions in total endpoint closure error of 45.7% - 78.0% relative to magnetic-inertial odometry. Under poor illumination, MISLAM maintains tracking after visual-inertial odometry fails, achieving a horizontal closure error of 0.332 m, although vertical drift remains a limitation. These results support magnetic-inertial SLAM as a complementary localization modality for robotic sensor suites operating under degraded visual conditions.

0.16

Marker-Constrained Pose-Graph Correction for Cross-Platform Georeferencing in GNSS-Denied Environments

cs.RO cs.MA ·2026-08-17 ·Marco Giberna, Jose Luis Sanchez Lopez, Holger Voos
published similarity 0.62
Abstract · 14 pages, 5 figures, 5 tables, submitted to SPIE Security + Defence conference

Autonomous operation in GNSS-denied environments requires heterogeneous mapping pipelines to maintain a consistent spatial reference. This paper presents a framework using camouflage-matched fiducial markers fabricated from Cholesteric Spherical Reflectors (CSRs) as pre-surveyed visual anchors. The anchors georeference both a lightweight LiDAR-odometry trajectory and a dense RTAB-Map reconstruction, allowing their outputs to be expressed in a common LUREF frame (geodetic coordinate reference system used in Luxembourg) without requiring GNSS measurements during operation. The method combines coarse similarity alignment with marker-constrained pose-graph optimization. We evaluate it using two handheld acquisition sessions with ground-level and elevated motion profiles emulating UGV and UAV operation. A single iMarker was relocated among six surveyed positions, with the first position revisited to quantify drift correction. Marker-anchor correction reduced revisit inconsistency by 97.9% and 99.1% for the UAV- and UGV-emulating sessions, respectively, and improved held-out anchor prediction compared with one-time alignment. Separately georeferenced dense reconstructions achieved a median cross-session nearest-neighbour distance of 58 cm without explicit cross-session registration. Marker processing operated in real time, while trajectory correction required less than 0.25 s per session. These results demonstrate a proof of concept for georeferencing lightweight odometry and dense reconstructions using visually unobtrusive, pre-surveyed anchors during GNSS-denied operation.

0.45

SCOUT-SLAM: Structurally-Coupled Dual Uncertainty-Aware 3DGS SLAM in the Wild

cs.CV ·2026-09-13 ·Kumaran Karthik, Pramat Shastri Jois, Suresh Sundaram
similarity 0.62
Abstract

Recently, 3D Gaussian Splatting SLAM (3DGS-SLAM) has gained significant momentum in simultaneous localization and 3DGS scene reconstruction. In real-world scenarios with rapid camera motion and cluttered dynamic environments, existing methods rely on the stability of the underlying scene reconstruction to model uncertainty. This leads to a circular dependency between camera tracking accuracy and reconstruction quality: reconstruction instabilities degrade uncertainty modeling, which affects accurate camera tracking and static scene reconstruction. To address this, the paper proposes SCOUT-SLAM, a structurally-coupled dual-uncertainty framework in which both uncertainties are estimated from a shared base network. A low-rank adaptation of this network, trained on multi-view feature consistency, estimates a tracking uncertainty that does not depend solely on the reconstruction quality. A spatially-adaptive prior modulates the network's training objective so that reconstruction instability does not inflate uncertainty on static regions, keeping the shared representation intact for both branches. Evaluations on dynamic benchmarks (TUM RGB-D, Bonn Dynamic, Wild-SLAM MoCap) demonstrate that SCOUT-SLAM achieves state-of-the-art camera tracking accuracy and artifact-free static scene reconstruction.

0.20

Visual-Inertial RGB-D SLAM with Encoders for a Differential Wheeled Robot

cs.RO ·2026-10-30 ·Zhanghao Zhu, Yutaka Kaizu, Kenichi Furuhashi, Kenji Imou
publishedcode/datahighly cited similarity 0.62
Abstract · 11 pages. Author-accepted manuscript of the article published in IEEE Sensors Journal, 2022

Recent years have seen multiple impressive results in visual-inertial odometry (VIO) techniques, by which accurate state estimation can be achieved via the extended Kalman filter (EKF) or nonlinear optimization. However, these approaches are rarely open source, and they tend to fail in real experiments due to the temporary lack of feature points and fast motion. Therefore, in this study, we used encoders to overcome the temporary failure of purely vision-based simultaneous localization and mapping (SLAM). Here, we propose a generative measurement model for encoders and derive an expression for the maximum a posteriori (MAP) estimate and necessary Jacobians for optimization. We use our theory to present a novel tightly coupled visual-inertial encoder RGB-Depth (RGB-D) SLAM system. Tests on our system on an in-house dataset confirmed that our modeling effort led to accurate (with a root mean squared error (RMSE) of approximately 2-7 cm) and robust state estimation in real time. The source code and our dataset containing the encoder information have been published for verification.

0.74