CS Paper Radar

Polarity--Time Interaction and Multi-Level Reliability for Event-Based Spacecraft Pose Estimation

Yonglong Zhang, Zongwu Xie, Yang Liu

cs.AI cs.RO ·submitted 2026-10-27 04:29 UTC · v1

Abstract

Sparse event responses produce uneven keypoint errors whose effects on spacecraft pose depend on correspondence geometry and the reliability of successive observations. We present a reliability-aware framework connecting polarity--time localization, geometric recovery, event--CAD refinement, and trajectory optimization. A three-branch representation combines positive events, negative events, and recent-event timing through cross-branch attention and gating, followed by spatiotemporal aggregation. An ordered semantic-point head estimates relative correspondence precision for geometrically constrained pose recovery. Event-edge and CAD-projection agreement then guide local pose refinement under keypoint-geometry safeguards. At the sequence level, a ten-dimensional descriptor combines heatmap shape, reprojection consistency, and geometric conditioning to set time-aligned observation scales. On the official SPADES challenge test set, the complete system achieves a combined pose score of 0.0474, approximately 5.4\% below PASAN+IRIS. Validation ablations reduce the score from 0.0772 for base localization with uniform PnP to 0.0514 for the complete cascade; on identical single-frame observations, quality weighting reduces the score from 0.0549 with constant-weight optimization to 0.0514.

Closest papers

Nearest neighbours by meaning across the whole index.

Direct Regression and Geometric Recovery for Event-based Spacecraft Pose Estimation

cs.CV ·2026-11-06 ·Pruthvi Nandan Janga, Kashyap Hegde Kota, Bharatesh Chakravarthi
similarity 0.74
Abstract

Event cameras offer high temporal resolution and dynamic range for uncooperative spacecraft pose estimation, but models trained on synthetic event streams must generalize to the noise, background activity, and contrast variation of physical sensors. We present a comparative systems study of two independently developed approaches to synthetic-to-real, event-based 6-DoF spacecraft pose estimation. The first is a modular pipeline that combines learned keypoint detection and unlabeled target-domain adaptation with geometry-based pose recovery and temporal smoothing. The second directly regresses translation and rotation from global and cropped event representations using an apparent-scale cue, physics-motivated synthetic corruptions, and feature-consistency regularization. We evaluate both systems under the same SPARK 2026 hidden-test protocol on the real-event split of SPADES, with predictions for all test frames. The results reveal a component-wise reversal concealed by the aggregate challenge score: direct regression reduces orientation error by 22.7% (1.1767 to 0.9101 rad) and obtains a 13.4% lower composite score, whereas the modular pipeline reduces relative translation error by 78.7% (0.1335 to 0.0285). Archived configurations and a qualitative failure case identify plausible explanations for these complementary error profiles, without isolating their causes. These findings motivate a testable hybrid design that combines direct orientation estimation with geometry-constrained translation recovery.

0.17

HAT: Hypothesis-Anchored Tracking for Video Monocular Spacecraft Pose Estimation

cs.CV ·2026-09-18 ·André Lopo, Atabak Dehban, Rodrigo Ventura
similarity 0.69
Abstract · 8 pages, 3 figures, 4 tables

Monocular 6-DoF pose estimation of non-cooperative targets is important for on-orbit servicing and debris removal. A single-image estimator can confuse near-symmetric spacecraft orientations, and tracking can preserve an incorrect pose. We present Hypothesis-Anchored Tracking (HAT), a causal framework that uses inter-frame motion to select among competing CAD-based pose hypotheses before alignment and fusion. Rather than independently choosing the highest-scoring hypothesis in each image, HAT retains competing orientation histories and selects a pose to anchor the relative trajectory estimated by monocular SLAM. Sparse anchors and pose fusion provide per-frame estimates after initialization without revising past outputs. The method requires only a calibrated RGB sequence, a metric CAD model, and target image regions, which can be supplied by detection or segmentation. The pretrained pose and SLAM networks require no target-specific training or fine-tuning. We evaluate two versions, Mega-HAT and Pico-HAT, using MegaPose and PicoPose, on SPARK-2024, SwissCube and SHIRT, with YCB-Video assessing performance outside the space domain. Using one temporal configuration per method, the arithmetic means of the four dataset-wise comparisons show 9.4% lower mean pose error and 3.76 times the sustained input FPS for Mega-HAT relative to independent MegaPose, and 23.9% lower mean pose error and 2.42 times the FPS for Pico-HAT relative to independent PicoPose. Mega-HAT ablations on SPARK and an offline reference examine component contributions and the effect of revising past estimates.

0.51

Sparse Anchors for Visual Multi-Session Registration in Changing Environments

cs.CV cs.RO ·2026-11-03 ·Yunus Talha Erzurumlu, Niklas Trekel, Saurabh Gupta, Nico Koltermann, Olga Vysotska +3 more
similarity 0.66
Abstract · 8 pages, 4 figures, 2 tables

Repeated robotic monitoring requires localization across visits to the same environment, even if the environment changes. Such changes can substantially reduce persistent visual content, and repetitive structures can lead to incorrect cross-session correspondences. In this paper, we address visual multi-session registration of a new data recording (the query session) to a previously reconstructed reference map. Under substantial visual and structural changes, cross-session localization may be possible only for parts of the trajectory. In our approach, we therefore rely on a sparse set of reliable absolute pose constraints and combine them with within-session relative-pose information to register the complete trajectory to the reference map. We first estimate absolute alignment hypotheses through visual place recognition, local feature matching, and geometric verification. We then use sequence consensus to reject hypotheses that are inconsistent with a common query-to-reference alignment and retain the remaining poses as absolute anchors. These anchors are refined through featuremetric alignment against a Gaussian feature field and combined with within-session relative-pose constraints in a robust pose-graph optimization. We evaluate our approach on 15 cross-session experiments from the challenging HILTI26 construction-site dataset, covering substantial scene changes and difficult-to-match environments. Our method achieves 94.4% recall within 1m and 100.0% within 5m, outperforming independent image localization, which peaks at 65.3% and 70.7%, respectively, as well as direct registration of independently reconstructed Structure-from-Motion geometry. Our results show that sparse, reliable absolute anchors can provide accurate and complete trajectory registration even when reliable cross-session correspondences are available only for part of the query session.

0.26

Recurrent Vision Transformers for Event-Based Spacecraft Pose Estimation Under Slow Relative Motions

cs.CV ·2026-10-19 ·Sofia McLeod, Mohsi Jawaid, Carl Seubert, Tat-Jun Chin
similarity 0.65
Abstract

Vision-based object pose estimation is vital for conducting spacecraft rendezvous and proximity operations (RPO). Recent research has demonstrated the robustness of event cameras against the harsh lighting conditions that often occur in orbit, thanks to the extremely high dynamic range of event sensors. However, event-based spacecraft pose estimation (EBSPE) suffers when the relative motion between the chaser and target is slow, since the event rate drops significantly, leading to data with low signal-to-noise ratio. Unfortunately, for safety reasons, real RPO trajectories often involve slow relative motions (e.g., down to 1 mm/s), and operating under low illumination exacerbates the problem. Addressing slow relative motions is thus crucial to raise the practicality of EBSPE. To this end, we propose using recurrent vision transformers (RVT) for EBSPE. The key idea is to exploit recurrent memory to capture longer-term information across sparse event streams, and to learn the temporal attention span from full trajectories rather than fixing the time window. We developed an RVT-based heatmap regressor to produce 2D-3D correspondences for pose estimation, which was validated on real event data collected under slow relative motions representative of RPO trajectories. Results indicate the superior pose estimation accuracy and stability of our RVT-based method, relative to previous per-event-frame-based or fixed-time-window EBSPE methods.

0.28

Spacecraft Pose Tracking via Kinematic Prediction and Selective Event Correction

cs.RO ·2026-10-14 ·Yonglong Zhang, Guanning Yao, Shuo Zhang, Yifan Yang, Yang Liu† +1 more
similarity 0.64
Abstract

In initialized spacecraft tracking, a short-horizon motion prediction remains available as event support changes. Observation-Aligned Event Innovation (OA-EI) uses events to correct selected components of this prediction. A constant-body-twist model propagates the complete pose; the event encoder proposes rotational and normalized image-plane translation corrections, retaining propagated axial depth. Candidate magnitudes come from a bounded Scale Gate and a deterministic activity factor, with empty windows returning the prediction unchanged. Evaluation uses four FRESH physical-event trajectories, twenty rollout starts, and three training seeds. Each rollout starts from two reference poses and then uses self-estimates. At 7.7 seconds, rotation and translation errors fall from 41.63°/57.28 mm for prediction alone to 15.73°/22.41 mm for OA-EI, reductions of 62.2% and 60.9%. Failure rates fall from 20.0% to 1.67%. Matched ablations favor the rotation-bearing interface for overall pose accuracy; combining scaling with activity support gives the lowest errors at every tested event-retention level. On Jetson Orin Nano, the measured in-memory update takes 44.56 milliseconds at the median and 58.77 milliseconds at P95.

0.17

Fast Pose Tracking of Rigid Objects with Compact Pose Graph Optimization

cs.CV ·2026-10-08 ·Xiaojie Zhang, Tom Fischer, Viktor Larsson, Eddy Ilg
similarity 0.63
Abstract

Tracking a novel object's 6D pose over long horizons currently requires either expensive onboarding or a reconstruction maintained throughout the sequence. This makes current trackers impractical for robotic manipulation and augmented reality, which need trackers that are ready to use and run in real time. We show that a lightweight tracking module can be applied on top of a wide range of correspondence estimation methods to keep drifts bounded while maintaining fast runtime. Our key idea is to avoid point-based optimization in the pose graph and operate only on relative pose constraints, which we weight by a derived uncertainty from the geometric alignment. This makes optimization independent of the number of correspondences while avoiding the direct inclusion of noisy point measurements, leading to fast and robust long-term tracking. Across four real-world benchmarks, our approach achieves tracking accuracy comparable to reconstruction-based trackers with a fraction of the optimization cost. Overall, these results suggest that a compact and reliable pose graph optimization can provide long-horizon consistency at substantially lower computational cost.

0.13

Comparing Trajectories from Positions Alone: Curvature-Based Time Alignment and Drift Error Metric

cs.RO ·2026-09-14 ·Effie Daum, Daniele De Martini, Claire Dune, François Pomerleau
similarity 0.63
Abstract

In field robotics, acquiring independent large-scale reference trajectories more accurate than the evaluated estimates remains an open challenge. The domain is widely reliant on Absolute Trajectory Error (ATE) and Relative Pose Error (RPE), computed with automated tools, that rest on assumptions and evaluation parameters rarely made explicit. When unreported, the errors can be misleading and hinder fair comparisons. This paper introduces a trajectory-evaluation protocol for standardized and reliable accuracy assessment in state estimation, localization, and Simultaneous Localization And Mapping (SLAM). The approach combines a novel temporal alignment method based on curvature signals with an error metric normalized by travelled distance. We explicitly account for temporal synchronization, sampling alignment, and extrinsic calibration, quantifying their influence through a sensitivity analysis. The proposed protocol contributes to more rigorous, reproducible, and standardized trajectory evaluation.

0.43

A Height-Constrained 2-Point Minimal Solver for Pose Estimation from Active LED Markers with Event Cameras

cs.CV cs.RO ·2026-08-10 ·Runze Yuan, Alexander Kappler, Jun Zhang, Kuangyi Chen, Fabio Morbidi +3 more
published similarity 0.62
Abstract · 8 pages, 6 figures, accepted by IEEE/RSJ International Conference on INTELLIGENT ROBOTS & SYSTEMS (IROS) 2026

In many autonomous applications requiring real-time localization, active marker-based systems are preferred due to their low latency and ease of deployment compared to computationally demanding feature-based methods. Event~\mbox{cameras} offer high temporal resolution and minimal delay and are commonly used with active LED markers for robust real-time localization. Existing methods typically rely on Perspective-n-Point (PnP) solvers for pose estimation. However, structured marker layouts can be challenging to deploy in space-constrained scenarios, while partial self-motion information (e.g., gravity direction and altitude) is readily available from onboard sensors. We derive a robust and accurate minimal solver that estimates camera pose from only two LED markers by incorporating known tilt angle and camera height measured by an onboard sensor, such as an IMU or an altimeter. The proposed formulation uniquely determines the camera pose through both a closed-form and a linear least-squares solution. We further analyze degenerate configurations and characterize the conditions under which height information does not contribute to rotation estimation. For evaluation, we developed an event-based active marker system to collect real-world data with ground truth from a motion capture system. Experiments on both synthetic and real data demonstrate improved accuracy over the state-of-the-art P2P solver and competitive performance relative to P3P.

0.33