CS Paper Radar

Statistical Inference-Based Channel Estimation for LD-Driven Visible Light O-OFDM Systems in the Presence of Relative Intensity and Input-Signal-Dependent Shot Noise

Shubham Saxena, Karra Sreeman Reddy, Suraj Srivastava, Subrahmanya Swamy Peruru, Aditya K. Jagannatham, Lajos Hanzo

eess.SP ·submitted 2026-09-14 11:36 UTC · v1
benchmarktheory

Abstract

Laser diode (LD)-based luminaires are gaining increasing attention in automotive applications and are expected to extend to residential and commercial environments, creating opportunities for high-bandwidth visible light communication (VLC) systems. However, practical LD-based VLC links are impaired by input-signal-dependent shot noise (ISDSN), relative intensity noise (RIN), and thermal noise, which affect reliable channel estimation (CE). This work investigates their joint impact on receiver-side CE in a single-input single-output (SISO) optical orthogonal frequency division multiplexing (OOFDM) VLC system under a statistically random channel model. A statistical inference framework is developed in which the receiver exploits observed signal variations to estimate the channel under optical impairments. Closed-form expressions are derived for least squares (LS), maximum likelihood (ML), maximum a posteriori probability (MAP), minimum mean square error (MMSE), and linear MMSE (LMMSE) estimators. In addition, the Bayesian Cramer-Rao lower bound (BCRLB) is derived to benchmark mean square error (MSE) performance. Monte Carlo simulations for direct current-biased O-OFDM (DCO-OFDM) and asymmetrically clipped O-OFDM (ACO-OFDM) validate the analysis. Results show substantial CE degradation under the joint presence of ISDSN and RIN, while the MMSE estimator consistently achieves the lowest MSE, demonstrating strong potential for robust and adaptive receiver operation in practical VLC systems.

Closest papers

Nearest neighbours by meaning across the whole index.

Sparse Channel Estimation and Signal Recovery for Reduced-PAPR Visible Light Optical OFDM Systems Relying on Bayesian Learning

eess.SP ·2026-09-14 ·Shubham Saxena, Suraj Srivastava, Aditya K. Jagannatham, Lajos Hanzo
publishedtheory similarity 0.67
Abstract

A multipath CIR estimator is proposed, followed by sparse frequency-domain (FD) signal detection, which harnesses the simultaneous-sparsity innate in the multipath CIR and FD signals across measurement vectors, conceived for optical OFDM (O-OFDM) utilized for visible light communication (VLC) systems having reduced peak-to-average power ratio. At the outset, we derive the input-output relationships for the asymmetrically clipped O-OFDM (ACO-OFDM) as well as for the direct current-biased O-OFDM (DCO-OFDM) systems. Next, traditional benchmarking methods are introduced for channel estimation (CE), including both the LMMSE and LS methods, followed by an orthogonal matching pursuit (OMP)-based technique capable of exploiting sparsity in the multipath CIR of the VLC system. Subsequently, an CE technique based on a novel group sparse OMP (GOMP) concept is proposed, which capitalizes on the group-sparsity in the delay domain of the CIR across measurement vectors, attributed to the multipath characteristics inherent in the NLoS components of the VLC channel model. Additionally, an advanced group-sparse CE technique is put forth based on the group-sparse Bayesian learning (GBL) approach, which considerably reduces the pilot overhead. A low complexity version of GBL, termed LCGBL, is also developed that reduces the computational cost of GBL significantly. Consequently, the GOMP and GBL frameworks are also extended to the data detection of the sparse FD O-OFDM symbols, which utilizes the group-sparsity of the FD O-OFDM symbols across measurement vectors. The Bayesian Cramer-Rao lower bound (BCRLB) is computed to assess the estimation performance of the proposed CE techniques. Our simulations demonstrate that, despite its reduced pilot overhead, the proposed GBL technique outperforms the other CE schemes in terms of its BER, outage probability, and NMSE, quantitatively reinforcing its superiority.

0.46

Data-Aided Variational Bayesian Inference for CSI Estimation over Doubly-Selective DCO-OTFS MIMO VLC Systems with Affine-Precoded Superimposed Training Sequences

eess.SP ·2026-09-14 ·Shubham Saxena, Suraj Srivastava, Aditya K. Jagannatham
similarity 0.60
Abstract

An orthogonal affine-precoded superimposed training sequences (AP-STS)-based architecture is developed for the cyclic prefix (CP)-aided multiple input multiple output (MIMO) direct-current-biased orthogonal time frequency space (DCO-OTFS) visible light communication (VLC) systems relying on arbitrary transmitter-receiver pulse shaping. The data and pilot symbol matrices are affine-precoded (AP) and superimposed in the delay-Doppler (DD)-domain for each transmit light-emitting diode (LED), followed by the development of an end-to-end DD-domain relationship for the input-output symbols. At the receiver for each receiver photodiode (PD), the decoupled pilot and data symbol are extracted by employing orthogonal precoder matrices, which eliminates the mutual interference. Furthermore, a novel pilot-aided (PA) variational Bayesian inference (PA-VBI) technique is conceived for the channel state information (CSI) estimation of MIMO DCO-OTFS VLC systems based on the expectation-maximization (EM) technique. Subsequently, a data-aided (DA) variational Bayesian inference (DA-VBI)-based joint CSI estimation and data detection technique is proposed, which beneficially harnesses the estimated data symbols for improved CSI estimation. Moreover, the Bayesian Cramer-Rao lower bounds (BCRLBs) are also derived for MIMO DCO-OTFS VLC systems. Finally, simulation results demonstrate that the proposed method yields superior performance in terms of normalized mean-square-error (NMSE), pilot overhead, and symbol error-rate (SER).

0.38

Data-Aided Bayesian Learning for CSI Estimation over Doubly-Selective DCO-OTFS MIMO VLC Channels with Affine-Precoded Superimposed Training Sequences

eess.SP ·2026-09-15 ·Shubham Saxena, Suraj Srivastava, Aditya K. Jagannatham, Lajos Hanzo
similarity 0.60
Abstract

An orthogonal affine-precoded superimposed training sequence (AP-STS)-based framework is conceived for cyclic prefix (CP)-assisted multiple-input multiple-output (MIMO) direct-current-biased orthogonal time frequency space (DCOOTFS) visible light communication (VLC) links using arbitrary transmit-receive pulse shaping for transmission over doubly selective channels. For each light-emitting diode (LED), the pilot and data matrices are jointly affine-precoded and overlaid in the delay-Doppler (DD)-domain. Then, a unified end-to-end DD-domain input-output relationship is derived. At each photodiode (PD), orthogonal precoders are utilized to separate the pilot and data components, thereby suppressing mutual interference. Building on this model, an expectation-maximization (EM)-driven DD-domain pilot-aided Bayesian learning (DD-PBL) scheme is developed to estimate the channel state information (CSI). A DD-domain data-aided Bayesian learning (DD-DBL) procedure is then proposed for jointly refining the CSI and detecting data by exploiting the detected symbols as virtual pilots in the spirit of decision-directed channel estimation. The linear minimum mean square error (LMMSE) detector harnessed explicitly accounts for CSI uncertainty due to realistic estimation errors. In addition, Bayesian Cramer-Rao lower bounds (BCRLBs) are derived for the MIMO DCO-OTFS VLC setting considered. Numerical results confirm improved normalized mean-square-error (NMSE), reduced pilot overhead, and mitigated symbol error-rate (SER) relative to recent benchmarks.

0.17

Impact of Optical Reconfigurable Intelligent Surfaces on Channel Estimation for VLC Systems

eess.SP ·2026-08-25 ·Borja Genoves Guzman, M. Julia Fernández-Getino García
published similarity 0.57
Abstract · Accepted for publication in IEEE Globecom 2026

Visible light communication (VLC) offers wireless data connectivity indoors, yet its performance is severely limited by link blockages. While optical reconfigurable intelligent surfaces (ORISs) have been proposed to overcome these blockages, existing literature predominantly relies on the unrealistic assumption of ideal channel state information. In this paper we investigate the contribution of ORIS elements in VLC systems under practical, non-ideal channel estimation scenarios. We analyze the communication performance using two pilot-based estimation techniques: pilot symbol assisted modulation (PSAM) and superimposed training (ST), evaluating the impact of data power allocation factors and averaged orthogonal frequency division multiplexing (OFDM) symbols. Our results show that PSAM with an ORIS deployment enables optimal large data power allocation factors, resulting in spectral efficiency improvements that surpass scenarios with ideal channel estimates but without ORIS deployment. While ST performs well with a large number of averaged OFDM symbols, it is unable to overcome the performance of PSAM when ORIS elements are deployed. We also find the system robust to imperfect ORIS orientation; even with only half of the elements accurately aligned, performance remains acceptable. Ultimately, we show that spectral efficiency values of approximately 5 bits/s/Hz are achievable using ORIS with PSAM, a performance comparable to, or even exceeding, that of unobstructed line-of-sight links.

0.31

Analytical Channel Modeling and Stability Aware Optimization of Optical Inter Satellite Links

cs.IT physics.optics ·2026-09-15 ·Hossein Safi, Ziheng Wang, Stijn Mast, Harald Haas, Iman Tavakkolnia
top venue similarity 0.57
Abstract

Optical inter-satellite links (OISLs) are key enablers for high-capacity space networks and next-generation satellite constellations. However, their extreme directionality makes link reliability highly sensitive to platform-induced pointing jitter, which causes random misalignment between the transmitter and receiver beams. In this paper, we develop a tractable closed-form statistical channel model for point-to-point OISLs subject to independent pointing errors at both terminals. Accurate Gaussian main-lobe approximations are applied to the transmitter far-field pattern and receiver coupling efficiency. This transforms the diffraction-based channel response into closed-form expressions for the channel-gain distribution, outage probability, and ergodic capacity. The analytical results are validated through Monte Carlo simulations and used to study the impact of terminal stability, beam divergence, and link margin on OISL performance. The results show that outage probability is governed by the weaker terminal in terms of pointing stability, while improving only the stronger terminal provides minimal additional benefit. In contrast, the ergodic-capacity penalty depends on the combined stability of both terminals, revealing a fundamental distinction between reliability and throughput metrics. The proposed framework provides practical design guidelines for selecting beam parameters and specifying pointing and tracking requirements under varying levels of platform instability.

0.30

Sparse Target Parameter and Channel Estimation in MIMO-OOFDM-Aided Visible Light Integrated Sensing and Communication Systems

eess.SP ·2026-10-26 ·Shubham Saxena, Garudadri Mythreya, Suraj Srivastava, Washim Uddin Mondal, Aditya K. Jagannatham
similarity 0.56
Abstract

A unified framework is developed for parameter estimation (PE) and channel estimation (CE) in monostatic multiple-input multiple-output (MIMO) direct-current-biased optical orthogonal frequency division multiplexing (DCO-OFDM)-aided visible light integrated sensing and communication (VL-ISAC) systems. A common optical waveform supports sensing and downlink communication while accounting for target reflections, clutter, Doppler effects, and the communication channel. For sensing PE, one-dimensional (1D) and two-dimensional (2D) on-grid and off-grid sparse representations are formulated. The proposed 1D off-grid Bayesian learning (1D-OffGBL) algorithm employs a joint delay-Doppler (DD) dictionary to exploit coupled DD information and achieve high estimation accuracy. In contrast, the proposed 2D off-grid Bayesian learning (2D-OffGBL) algorithm sequentially estimates the Doppler and delay parameters, thereby avoiding a high-dimensional joint dictionary and reducing computational complexity. Both algorithms iteratively refine the continuous-valued delay and Doppler parameters to mitigate off-grid basis mismatch. Furthermore, 1D and 2D sparse channel representations and corresponding CE procedures are developed, followed by range and velocity estimation for both sensing models. Closed-form Bayesian Cramer-Rao bounds (BCRBs) are derived for PE, CE, range, and velocity estimation. Simulations demonstrate that the proposed algorithms outperform conventional sparse recovery schemes in terms of normalized mean-squared error (NMSE). In particular, 1D-OffGBL achieves the highest estimation accuracy, whereas 2D-OffGBL provides a favourable performance-complexity trade-off for practical MIMO DCO-OFDM VL-ISAC systems.

0.46

Optical ISAC with Single-Photon Avalanche Diode (SPAD) Arrays

eess.SP ·2026-10-19 ·Vasilis K. Papanikolaou, Dimitris Bozanis, Ferdaous Tarhouni, George K. Karagiannidis, Christos Masouros +1 more
similarity 0.55
Abstract · 5 pages, 4 figures, conference

Single-photon avalanche diode (SPAD) arrays offer photon-level sensitivity for sensing in optical integrated sensing and communication (O-ISAC). However, after each detection, a SPAD is blind for a dead time, which saturates the array at high received power. Existing O-ISAC analyses assume linear receivers and do not capture this effect. In this paper, we study ranging with a SPAD array in a monostatic O-ISAC system based on direct-current-biased optical orthogonal frequency-division multiplexing (DCO-OFDM). Sampling the array once per dead time, we model the number of pixels that detect a photon in each sampling interval as a binomial random variable whose success probability accounts for the intensity variation of the echo within a dead time. Based on this model, we derive the Cramér-Rao bound (CRB) for range estimation. We show that the SPAD count model of optical wireless communication, which assumes a constant photon rate over a dead time, causes a range bias that depends on the received power. Moreover, unlike for a linear photodiode, saturation degrades the ranging accuracy beyond a sensing-optimal transmit power. The rate-constrained operating point is then the larger of this power and the power needed for the target data rate. Numerical results validate the analysis against a continuous-time photon-counting simulation and show that the proposed model is needed for ranging.

0.24

Diffused-Beam Laser-Diode LiFi Under Realizable Receiver, Noise, and Safety Constraints: Design-Space Analysis and an Open Cross-Verified Simulation Framework

eess.SP cs.NIcs.PF ·2026-08-15 ·Hussain Ahmad, Saleem Aslam, Ammara Nasim, Syed Muhammad Talha Gillani, Toheed Omer
code/data similarity 0.55
Abstract · 15 pages, 16 figures, Journal

Link-budget studies of indoor optical wireless systems frequently assume receiver parameter sets--large photodetector area, large transimpedance, and wide bandwidth simultaneously--that violate basic circuit constraints, and noise budgets that omit dominant amplifier and laser noise. This paper develops a realizability-constrained design-space analysis of a diffused-beam laser-diode (LD) LiFi link anchored to a hardware prototype. The analysis couples the generalized Lambertian channel of a holographic-diffuser source to a receiver model that enforces the transimpedance-amplifier gain-bandwidth/capacitance constraint and carries a complete noise budget: shot, feedback-resistor thermal, input current noise, capacitance-driven voltage-noise gain, and laser relative intensity noise (RIN). Against this budget we evaluate unipolar M-PAM under two FEC tiers (7%-overhead hard-decision at $3.8 \times 10^{-3}$, 20%-overhead soft-decision at $2 \times 10^{-2}$), first-bounce diffuse multipath, and a quantitative extended-source eye-safety assessment. The full model predicts 140 Mb/s net at the prototype's demonstrated 14-m range with 6.7 dB margin (OOK, HD tier), 240 Mb/s at the zero-margin 4-PAM/SD reach boundary of 14.0 m, and 480-558 Mb/s at 5 m--a factor 3.9-6.6 below what the same link yields under a naive textbook budget, quantifying how strongly idealized assumptions inflate LiFi projections. First-bounce analysis shows the downfacing-source/up-facing-receiver geometry confines multipath to a worst-case LOS-to-diffuse ratio of 4.2 dB and delay spreads below 0.13 ns, and the 500-mW source remains a factor $\ge 7.8$ under the Class-1 eye-safety limit. All models are released as an ns-3 module and Python engine backed by automated testing.

0.26