CS Paper Radar

Is INT8 Portable? A Cross-Platform Measurement Study of Quantized Inference on Embedded and Automotive Accelerators

Yuyeong Shin

cs.AR cs.LGcs.PF ·submitted 2026-09-14 05:29 UTC · v1
code/data

Abstract

Eight-bit integer (INT8) post-training quantization is the default recipe for edge deployment, under a widely held assumption: INT8 makes inference faster at a small, predictable accuracy cost, and a model quantized once can be carried to any target. We test that assumption with a controlled measurement study across seven hardware classes -- ARM and x86 CPUs, a discrete GPU, an NVIDIA Jetson AGX Orin iGPU and its NVDLA cores, and two vendor NPUs (Qualcomm Hexagon HTP, DEEPX DX-M1) -- holding the ONNX artifact and the quantization scales fixed so the integer kernel or ISA is the only free variable. Portability fails on three axes. (1) The sign of the INT8 speedup is set by the CPU's dot-product ISA (ARM dotprod/SDOT, x86 VNNI): cores that have it speed up by up to 2.1x, cores that lack it slow down by 1.7x, for the identical model and runtime. (2) INT8 outputs are not portable, and the rule is an invariance rather than a gradient: FP32 predictions are bit-identical for every pair (1000/1000), while INT8 predictions agree 1000/1000 exactly when two targets share an integer kernel and 958-965/1000 whenever they do not -- independent of whether the boundary is CPU<->CPU or CPU<->accelerator, and invisible to top-1 accuracy, which is preserved. (3) Vendor NPUs own quantization: a bring-your-own QDQ graph fails silently on one NPU (external scales ignored, accuracy 0.75 -> 0.005 while it compiles, profiles and runs without error) and loudly on the other (the compiler refuses the graph), so only the vendor's native path yields a correct engine. We further show that edge-NPU latency regimes are set by output/device-to-host transfer size rather than compute, and locate the transition with a fixed-compute sweep. We release the scripts and 32 reports. "Quantize once, deploy anywhere" is unsafe for embedded and automotive deployment, where per-input determinism and redundancy matter.

Comment
22 pages, 3 figures, 8 tables. Artifact:https://github.com/yyshin-katech/embedded-ai-quantization-guide/tree/paper1-v1

Closest papers

Nearest neighbours by meaning across the whole index.

The Integer Alibi: Localizing Cross-Kernel Divergence in INT8-Quantized LLM Inference

cs.LG ·2026-08-13 ·Teng-Ruei Chen
benchmark similarity 0.72
Abstract · 10 pages (IEEEtran two-column), 3 figures, 4 tables. Pre-registered protocol with append-only amendments. Companion to arXiv:2608.11693. v2:…

Two GPU kernels implementing the same scaled INT8 GEMM interface are usually treated as interchangeable. We test that assumption: holding the checkpoint, prompts, hardware, inference engine, decoding, and quantization configuration fixed, we swap only the INT8 linear kernel (CUTLASS versus Triton) inside vLLM. At 1.7B each arm reproduces itself bit-for-bit across cold restarts, yet the arms agree on no sequence in any end-to-end comparison we ran (0/8, 0/16, and 0/64). What makes this more than a benchmark discrepancy is an integer alibi: for shared INT8 operands under a verified no-overflow bound, the INT32 dot product is exact and order-independent, so the accumulator cannot be the source of any difference. Feeding both kernels identical operands from every linear layer of Qwen3-1.7B and 8B (196 and 252 layers), we find bit-identical outputs under power-of-two scales, confirming a pinned prediction list 196/196 and 252/252 (pre-registered at 1.7B, pinned but not blind at 8B), and observed differences of at most one bfloat16 spacing under the checkpoints' real scales. This localizes the divergence to scale application and output rounding after the exact accumulator. Applied as a probe checkpoint, the same intervention restores end-to-end bitwise agreement (8/8 and 16/16 sequences). Cross-implementation FP8 GEMM shows a different signature: both the prevalence and the magnitude of differences grow with reduction depth, while the INT8 fraction stays at parts per million and within one spacing over a 64x range of K. Teacher-forced replay ties layers to tokens: flips concentrate at small logit margins, which predict flip risk with ROC-AUC 0.94 on 16,384 positions. We will release the pre-registration, per-layer predictions, manifests with kernel-selection evidence, and a conformance procedure that turns these controls into a concrete check for kernel interchangeability.

0.46

16-bit Precision of Convolutional Neural Networks on Microcontroller Units for 8-bit Costs

cs.LG ·2026-10-02 ·Rui Liu, Benjamin Paaßen
similarity 0.67
Abstract

To deploy deep neural networks on edge hardware, highly efficient inference schemes are necessary that retain high accuracy. This work presents W16A16, a high precision (16-bit), fast speed, low energy quantization method. On a widely applied microcontroller architecture Armv7E-M, our proposed approach achieves faster speed and lower energy consumption on layer- and model-level compared to alternative quantization schemes. We analyze the architecture of Armv7E-M, explain the underlying principles behind the performance advantages of 16-bit approaches, and evaluate the empiric quantization errors for regression and classification tasks, as well as empiric time- and energy consumption in MCU deployment. We observe ca.\ 10 times lower quantization errors compared to 8-bit quantization schemes while achieving similar or better inference times and energy consumption.

0.09

Spec Sheets Are Not Kernels: An ISA- and Source-Level Audit of INT8 Availability on NVIDIA Blackwell Ultra

cs.AR ·2026-08-12 ·Teng-Ruei Chen
code/data similarity 0.66
Abstract · 8 pages (IEEEtran two-column), 2 figures, 3 tables. All sources pinned to commits/digests with access dates; no performance measurements (co…

NVIDIA's published specifications give the Blackwell Ultra GPU (B300) a dense-compute ratio of roughly 30:1 between FP8 and INT8 tensor-core throughput; its predecessors, H200 and B200, both provide 1:1. We audit what this deprioritization means in practice by tracing INT8 W8A8 support through four layers of the stack: the published specifications, the PTX ISA, NVIDIA's CUTLASS kernel library, and the two major open-source LLM serving engines (vLLM and SGLang). We find a consistent, layered withdrawal: (i) the PTX ISA never exposes the fifth-generation tensor-core integer path (tcgen05.mma with .kind::i8) on sm_103a, even though the same PTX revision extends the FP4 kinds to that target, leaving legacy warp-level IMMA as the only architecturally legal integer tensor-core path on B300; (ii) CUTLASS's kernel generator explicitly skips INT8 UMMA generation for any build targeting 103a, while generating FP8 unconditionally; (iii) vLLM ships no INT8 GEMM for Blackwell and fails with a hard runtime error at the first forward pass, after the model has loaded; and (iv) SGLang's ahead-of-time INT8 GEMM stops at Sm90, while its FP8 tuning configurations already cover B200. We document an escape hatch (rerouting vLLM's INT8 path to a JIT-compiled Triton backend via an environment variable), a false-negative trap in the obvious profiler methodology for detecting "native INT8" on sm_103, and the practical failure semantics that make naive testing expensive. Together, these findings show that a quantization format's availability is a property of the whole stack rather than of the model or the spec sheet. Four distinct layers, three of them NVIDIA's own, withdrew INT8 support in mutually consistent ways, and a format that is nominally present on the datasheet is, by default, undeployable on this hardware.

0.62

FIGFLEX: A Mixed-Precision FP-INT GEMM Accelerator Co-Designed with Low-Bit LLM Quantization

cs.AR cs.LG ·2026-10-21 ·Faraz Tahmasebi, Haocheng Xu, Andrew Trauger, Yomal Perera, Zhenyu Tang +2 more
similarity 0.65
Abstract · 15 pages, 12 Figures

Weight-only quantization keeps LLM activations in floating point and stores weights as low-bit integers, turning the dominant workload into floating-point-integer (FP-INT) general matrix multiplication. Recent quantizers reach a 2-3-bit average with mixed precision, but hardware has not kept pace: GPUs dequantize weights to FP16 before the tensor-core multiply-accumulate, and bit-parallel FP-INT accelerators run at a single weight precision, so fewer bits save memory but not computation. In this paper, we present FIGFLEX, an algorithm-hardware co-designed mixed-precision accelerator whose bit-parallel datapath scales throughput as precision falls. FIGFLEX contributes (1) a shift-add, radix-4 reformulation of FP-INT multiplication that fuses the multiply-accumulate into a unified, precision-flexible partial-product reduction and roughly halves the partial products, together with a novel INT3 optimization that reclaims the idle datapath radix-4 leaves at that precision; and (2) a mixed-precision quantizer that assigns each channel group its bit-width according to the error GPTQ cannot compensate, with a per-input-channel column scaling whose power-of-two normalization keeps the scaled activations out of the FP16 subnormal range, so that the quantized model maps directly onto FIGFLEX's datapath with the same accuracy as on a GPU. On LLaMA-2-7B, FIGFLEX attains 5.85 and 8.77 WikiText-2 perplexity at 3- and 2-bit average precision, lower than GPTQ, AWQ, SliM-LLM, AMQ, and QuIP# (without fine-tuning), while delivering 1.56x and 1.42x higher whole-chip throughput per area on the linear GEMMs of a 3-bit mixed-precision model than AxCore and FIGLUT, respectively.

0.13

RAMP: Robust Adaptive Mixed-Precision Quantization for Edge CPU Vision Models

cs.CV cs.LGcs.PF ·2026-09-23 ·David Población-Criado, Dario Garcia-Gasulla, Eduardo Quinones
publishedcode/data similarity 0.65
Abstract · Accepted at the 37th British Machine Vision Conference (BMVC) 2026. 13 pages, 4 figures, 2 tables. Code available at https://github.com/davi…

Deploying deep learning models on edge CPUs is bottlenecked by computational and memory constraints. Mixed-precision quantization promises to reduce inference latency while preserving accuracy. However, quantization affects different layer types in inconsistent ways, so identifying where accuracy loss is minimized and latency reduction is maximized is critical, as the effect accumulates over a full deployment into substantial savings or unacceptable task degradation. Such identification relies on sensitivity metrics, proxies that estimate layer-wise degradation without evaluating the task accuracy of every candidate policy. Nevertheless, widely used metrics fail systematically on modern architectures. We present a systematic empirical study of 13 sensitivity metrics for layer-wise INT8 quantization across four distinctly different neural networks, and validate the resulting policies on two ARM64 platforms. Gradient-based sensitivity methods fail on 4 out of 8 model-hardware configurations and weight-based statistics on 2. In contrast, the Jensen-Shannon Divergence achieves zero catastrophic failures, reliably isolating the layers that cannot be safely quantized. A sensitivity metric alone does not define a policy, and the fixed thresholds typically used for that step are fragile over the highly skewed distributions of modern architectures. We address this with K-Means clustering, achieving near-lossless accuracy and a mean speed-up of $1.81\times$ over the full-precision model. Finally, we reveal that excluding from quantization the layers whose speed-up is negligible, regardless of their sensitivity, can be counterproductive, as it induces computational graph fragmentation and disables operator fusion. Our results yield concrete allocation policies for practitioners and researchers deploying quantized vision models on heterogeneous edge CPUs, without GPU access or gradient computation.

0.51

Deterministic, Reproducible Inference in Exact Integer Arithmetic, and Verifiable Distributed Inference as Its Consequence

cs.LG cs.DCcs.SE ·2026-11-10 ·Sayed Amir Karim
publishedcode/datahot direction similarity 0.65
Abstract

Optimized floating-point inference is not reproducible across environments: the same model on different hardware, compilers or thread counts can produce different bits. We present tritify, an open-source runtime that executes the forward pass of real models -- decoder-only language models, Mixture-of-Experts decoders, and the Segment Anything 2.1 image/video stack -- with the entire run-time path in exact integer arithmetic; floating point is confined to offline quantization and the float reference used for verification. We make three separate claims and verify each. (1) Cross-hardware reproducibility: the integer path produces bit-identical output run to run, across CPU instruction-set architectures, and across CPU/GPU, carried by a reproducing SHA-256 of the output. (2) Decision fidelity: the integer path reproduces the float reference's decision on the models and inputs tested, with the numeric exceptions measured; per-layer fidelity through sixteen layers of OLMoE-1B-7B and of a 106-billion-parameter MoE shows no fidelity cliff. (3) Location independence: a model's computation can be split across instruction sets, CPU and GPU, and networked machines with zero effect on the output bits. GLM-4.5-Air (106,852,251,264 parameters, 427 GB of integer codes) generated its answer across three machines, none of which can hold its integer codes in RAM, bit-identically to a single-host reference. The consequence is verifiable distributed inference: an untrusted server or a fleet of devices runs the model while an open scalar oracle re-derives the exact bytes; a guarantee against a dishonest server is future work. We do not claim a per-device speed-up, bit-equality of floating-valued intermediates, or confidentiality. Code: https://github.com/pelloran-inc/tritify

0.49

Implementation and Evaluation of BitNet Inference on a CGLA by Signed-Int4 Instructions

cs.AR ·2026-09-23 ·Takuto Ando, Yasuhiko Nakashima
similarity 0.64
Abstract · Accepted as a Regular Paper for the CSA Workshop at CANDAR 2026

Large language model (LLM) inference transfers model weights and activations for every generated token, making memory traffic and its energy cost part of the decode path. BitNet b1.58 represents its low-bit weights by ternary values and uses integer activations. However, this arithmetic does not match conventional int8 or floating-point general matrix multiplication, and existing BitNet accelerators implement it in specialized datapaths. We instead map this operation to a CPU-Grounded Linear Array (CGLA), a programmable ASIC with explicit direct memory access, local memories, and reusable compiler-visible integer lanes. The mapping adds OP_SMA4 as a reusable signed-int4 multiply-accumulate instruction rather than a BitNet-only datapath. Each ternary weight occupies one signed 4-bit lane. Each int8 activation is split into two signed-int4 fragments and reconstructed by shift-and-add. Frequency scaling of the 145 MHz FPGA measurement to an 840 MHz 28 nm CGLA achieved 0.390 ns per signed-int4 product. We showed that CGLA-offloaded BitNet C++ execution measures 2.52 tokens/s.

0.35

Efficient INT8 Inference of Small NLP Models on Server CPUs with PyTorch Native Stack

cs.CL ·2026-08-18 ·Weiwen Xia, Yuxin Cui, E Cao
similarity 0.64
Abstract · 13 pages

Small NLP models, especially BERT-family encoders, remain important in industrial workloads such as classification, ranking, and retrieval even in the era of large language models. On server CPUs, INT8 quantization offers an attractive latency-throughput-cost trade-off, but users increasingly expect such acceleration to be available directly in the native PyTorch stack. We integrate SmoothQuant into TorchAO and optimize the resulting inference path for Intel Xeon CPUs through graph-level fusion in TorchInductor and efficient INT8 GEMM kernel selection across oneDNN-, AVX512_VNNI-, and AMX-based implementations. Across BERT, DistilBERT, and XLM-RoBERTa benchmarks, the approach delivers up to 5.8x end-to-end throughput speedup with negligible---and in some cases no measurable---accuracy loss relative to the FP32 baseline. We also validated our work by detailed performance analysis with roofline models. The implementation has been upstreamed to PyTorch and TorchAO, enabling out-of-the-box deployment with native PyTorch tooling

0.36