CS Paper Radar

Structure-Preserving Quantum Circuit Architectures for Robot Kinematics

Andrea Morghen, Pierluigi Arpenti, Roberto Schiattarella, Giovanni Acampora, Bruno Siciliano

cs.RO quant-ph ·submitted 2026-09-14 11:20 UTC · v1

Abstract

Structured spatial data require quantum encodings that preserve geometric relations, expose measurable observables, and remain implementable on finite-depth hardware. This work introduces a quantum representation and circuit architecture for rigid-body transformations and specializes it to Denavit--Hartenberg kinematics of serial open-chain manipulators. Each translational contribution is factorized into a classical metric magnitude and a signed unit direction encoded by a single-qubit Bloch vector, while parameterized rotations reproduce the ordered propagation of frame directions. A selector register prepares probabilities proportional to the contribution magnitudes, and the reduced state of a designated readout qubit encodes their normalized weighted sum. The retained classical scale then reconstructs the metric end-effector position. Two additional readout qubits encode terminal-frame axes, providing a compact and geometrically interpretable pose interface. At the ideal expectation-value level, measured Pauli observables reproduce the corresponding classical kinematic quantities. Alternative circuit architectures realize the same representation with different tradeoffs in qubit count, circuit depth, controlled operations, and measurement requirements. Validation on a serial manipulator yields numerically negligible position and orientation reconstruction errors under ideal simulation. Finite-shot simulations, noisy executions, transpilation analysis, and a hardware demonstration further characterize statistical error, noise sensitivity, and implementation overhead without asserting computational advantage.

Closest papers

Nearest neighbours by meaning across the whole index.

Quantum Closed Loop Inverse Kinematics Through Hilbert-Space Encoding of Robot Kinematics

cs.RO ·2026-10-24 ·Andrea Morghen, Pierluigi Arpenti, Roberto Schiattarella, Giovanni Acampora, Bruno Siciliano
similarity 0.87
Abstract

The integration of quantum computing into robotics requires mathematical representations that preserve the geometric structure and configuration dependence of robot motion. This paper introduces a structure-preserving quantum representation of rigid-body transformations and serial-manipulator kinematics, establishing a correspondence between classical kinematic models and parameterized quantum circuits. Building on the Bloch-sphere representation, spatial directions are encoded into single-qubit states, while quantum rotations reproduce the ordered composition of reference-frame transformations. Translational contributions are combined through quantum-state aggregation, with their metric scales retained classically, enabling the reconstruction of end-effector position and orientation from Pauli expectation values. The formulation preserves the original joint variables and accommodates different kinematic conventions and joint types. Beyond forward kinematics, we establish that the manipulator geometric Jacobian can be reconstructed from quantum-observable derivatives using the parameter-shift rule, with analytical equivalence to its classical counterpart under ideal readout. To demonstrate the applicability of this representation to robot-level algorithms, we introduce Quantum Closed Loop Inverse Kinematics, a hybrid closed-loop method that exploits quantum-derived pose and Jacobian information. The proposed framework provides a geometrically interpretable foundation for developing and investigating quantum and hybrid computational methods for robotic kinematics and motion.

0.08

Qubit-to-Motion: Traceable Action Provenance in Hybrid QRL for Robotic Bin-Packing Sequencing

cs.RO cs.AI ·2026-11-08 ·Hassen Nigatu, Howard Li
code/data similarity 0.58
Abstract

Hybrid quantum reinforcement learning has been explored for robotic decision-making, but evaluations often emphasize task success, return, or convergence, leaving unresolved whether quantum circuit outputs influence constrained actions and remain traceable through robot execution. We present \texttt{Qubit-to-Motion}, an evidence-centered framework for support-constrained sequencing and simulated robotic placement. Four Pauli-$Z$ readouts provide the sole learned input to the actor and critic, while a support mask enforces admissible object selection. Each decision is recorded and linked via step indices and SHA-256 fingerprints to a sealed route, deterministic Cartesian and inverse-kinematics waypoints, prescribed joint motion, and MuJoCo contact replay. A frozen checkpoint is evaluated across five deterministic 30-object scene variants. All 150 placements satisfy support, containment, and settling criteria. A fixed-state zero-readout intervention changes $90.0\pm0.0\%$ of decisions, demonstrating dependence on the joint circuit representation. Mean macro travel is $34.537\pm0.206$~m, inference requires $8.60\pm1.27$~ms per route, and replay achieves $8.764\pm0.220~μ$m mean final position error with 0.356~mm maximum interpenetration. These results establish reproducible decision-to-contact traceability. The implementation is available at \href{https://anonymous.4open.science/r/Qubit-to-Motion-Quantum-Reinforcement-Learning-F7DC}{\textcolor{linkpink}{the anonymous repository}}.

0.26

POD-RoPE: Rotary Position Encoding over Physical Observation Distributions for Embodied AI

cs.RO cs.AI ·2026-10-24 ·Xiaodi Huang, Zilin Wang, Jinpeng Liu, Pengchuan Xiao, Zhenlei Shao +1 more
similarity 0.55
Abstract · 21 pages, 5 figures

Embodied perception requires positional representations that capture both physical geometry and the spatial and temporal extent of observations. We introduce POD-RoPE (Physical Observation Distribution RoPE), which represents token observation footprints as distributions over camera centers, viewing directions, and sampling times. Under independent sampling, expected rotations encode relative relationships between distributions; when each distribution collapses to a single address, the construction recovers pointwise RoPE. The same rotation statistics support Q/K matching and coherence-dependent V/O transformations, allowing observation geometry to guide both information selection and content aggregation. Per-token pre-aggregation avoids increasing sequence length or processing pairs of observation nodes. We evaluate POD-RoPE across four robot policy architectures, simulation and real-world manipulation, and complementary reconstruction, depth-estimation, and novel-view-synthesis tasks. Integrating POD-RoPE into Fast-WAM improves mean success from 91.83% to 92.88% across all 50 RoboTwin 2.0 tasks, and from 32.5% to 52.5% on two real-robot tasks on Sharpa North. Controlled reconstruction ablations support the contributions of distribution encoding and V/O transformations. In H20 model-block benchmarks, POD-RoPE achieves median forward-plus-backward speedups of $1.91\times$ over P-RoPE and $5.34\times$ over RayRoPE, with a median latency overhead of 17.4% over Standard RoPE. These results support physical observation distributions as an effective and computationally efficient basis for geometry-aware attention.

0.24

Quantum Shock and Train-Time Constrained Quantization: A Geometric Study of Finite-Resolution Variational Quantum Circuits

cs.NI ·2026-11-13 ·Vinayak Kumar Singh, Jyotsna Rani, Ganesh Prasad
similarity 0.55
Abstract

Finite-resolution interfaces map Variational-Circuit angle to discrete codebook. Since Pauli rotations are periodic, so Euclidean rounding may produce wrong codeword near a chart boundary; error due to coordinates alone cannot measure how much the final state was changed. Herein we define a metric, Quantum Shock, for Pure State it is defined as the average of the square of the Fubini-Study distance (over all inputs) between the pre-deployment and deployed states. This value is limited by constant multipliers of the mean of infidelity and provides upper limits on displacement when observing bounded quantities and margin based predictive stability. Extensions to the analytical Bures-angle for mixed-states were derived, along with a finite shot stability bound. The proposed Train-Time Constrained Quantization allows a delay in applying a penalty for selecting a codeword aligned with periodicity until after task only optimizations. Three small binary tasks were evaluated on a four qubit, two layer classifier using ten matched seeds, K = 4, 8, 16 and exact expectation values from simulation under noiseless conditions and state vector simulations. On our primary evaluation, T-CQ exhibited smaller average local quantum shock compared to circular post-training quantization for each task and code-book size tested. The re-execution on the x86-64 platform using K=8 preserved the direction of the mean-shock comparison but had varying magnitudes.

0.22

Reproducible Vision-Guided 6-DoF Robotic Manipulator with a Mixed Stepper-Driver Architecture and Browser-Native Control

cs.RO cs.CVeess.SY ·2026-08-24 ·Lasan Perera, Deneth Priyadarshana, Dulana Pitiwaduge, Isitha Dinujaya, Mokshan Colambage
code/data similarity 0.55
Abstract · 13 pages, 16 figures, 7 tables. Design files and firmware: https://github.com/Lasan-Perera/6-dof-arm-neuralnexus

We present the NeuralNexus Arm, an open, low-cost 6-DOF robotic manipulator built by an undergraduate engineering team, together with the design decisions and debugging experience needed to reproduce it. The arm is driven by a single STM32H743 microcontroller on a custom printed circuit board (PCB) and combines two stepper-driver strategies on one controller: push-pull 3.3 V step/direction outputs for onboard TMC2209 drivers on the three wrist joints, and open-drain outputs for external CL57T and DM542 drivers on the three high-torque proximal joints. We describe the mechanical design, mixed-driver electronics, interrupt-driven firmware, a MATLAB/Simscape-based inverse-kinematics pipeline, a browser-native control interface using the Web Serial API, and a lightweight vision pipeline for object localisation and autonomous pick-and-place tasks. We also document non-obvious hardware and firmware failure modes encountered during the transition from a development board to the custom PCB as reproducibility guidance. All design files and firmware are released openly. The platform actuates all six axes under coordinated control at a 2 kHz update rate and executes both manual and pre-recorded motions from the browser interface.

0.35

GadIR: A Spatial-Topology Preserving Compiler for Quantum Many-Body Systems Simulation

cs.AR quant-phcs.PL ·2026-09-01 ·Xiangyu Ren, Yuexun Huang, Zhaohui Yang, Yuchen Zhu, Tsung-Wei Huang +3 more
published similarity 0.55
Abstract · 59th IEEE/ACM International Symposium on Microarchitecture (MICRO 2026)

Simulating quantum many-body systems has been one of the most important applications of quantum computation. For simulation, the Hamiltonian of a physical system is compiled into quantum programs with native instructions for quantum hardware. In previous works, the Hamiltonian is represented as Pauli strings, then compiled and optimized based on the quantum circuit model. Such representation paradigm neglects the spatial topology of original physical models, which is vital information to reducing the overhead of compiling many-body systems Hamiltonians. To address such neglect, we introduce a spatial-topology preserving compiler for quantum many-body simulation. Using Pauli gadgets as the representations of the Hamiltonian, we introduce our intermediate representation -- GadIR, to preserve the spatial-topology information of original physical models. Our compiler frontend performs the group reduction algorithm based on Pauli gadget model, which is a hardware-independent optimization. Our compiler backend performs trotterization and scheduling on Pauli gadgets, then synthesizes the Pauli gadgets into hardware-native quantum programs. We evaluate our compiler on all the canonical quantum many-body system models, while achieving a significant reduction on compilation overhead regarding four major quantum architectures. Overall, our spatial-topology preserving IR exploits the compilation optimization space for quantum many-body systems Hamiltonian.

0.47

QiT: Quantum-Inspired Transformer for Visual Recognition Task

cs.AI quant-phcs.CVphysics.app-ph ·2026-09-15 ·Badri N. Patro, Vijay Agneeswaran
similarity 0.55
Abstract

Quantum machine learning offers a compelling representational perspective: angle-encoded states inhabit Hilbert spaces in which periodic similarities and interactions can be expressed naturally. Realizing this perspective for visual recognition remains difficult, however, because present quantum neural networks are constrained by limited qubit counts, costly circuit simulation and measurement, noise, and unstable optimization on noisy intermediate-scale quantum devices. We investigate whether useful structural ideas from quantum models can instead be realized as scalable classical Transformer operations. We introduce QiT, a Quantum-inspired Transformer for vision tasks with three components: (i) angle-inspired encoding that maps image tokens to learned trigonometric Hilbert-space features analogous to quantum rotation-based state encoding; (ii) self-attention over these periodic features, inducing a classical cosine kernel approximated to quantum fidelity kernels; and (iii) gated multiplicative emulation, a trainable classical surrogate for interaction terms found in variational circuits. All components are differentiable tensor operations, so QiT claims neither quantum computation nor quantum speedup and retains the $\mathcal{O}(N^2D)$ attention complexity of a standard Vision Transformer. Across image-classification benchmarks, QiT is competitive with a matched classical Transformer while avoiding the severe runtime cost observed for a small simulated quantum Transformer. QiT-B reaches 78.3\% ImageNet-1K top-1 accuracy with 45.7M parameters and 11.5 GFLOPs. These results position QiT as a scalable baseline for isolating and evaluating quantum-motivated inductive biases in visual recognition.

0.18

CQF-HMR: Continuous Quaternion Flows for Probabilistic 3D Human Mesh Recovery from a Single Image

cs.CV ·2026-09-01 ·Cuong Le, Bao-Long Tran, Pavlo Melnyk, Tahereh Dehdarirad, Bastian Wandt +1 more
similarity 0.54
Abstract · Under submission

Recovering 3D digital humans from a single 2D image is an ill-posed computer vision problem due to the loss of depth information. Probabilistic 3D human pose estimation compensates for this by estimating a set of 3D hypotheses from a prior distribution via generative models. However, most prior work focuses only on 3D keypoints, which often leads to implausible poses that are difficult to apply to downstream tasks, e.g. animation or digital humans. SMPL-based methods are more scalable thanks to the explicit body priors, but it requires more complex modeling of the generation process due to the non-additive nature of the joint rotations. In this work, we propose a novel approach for probabilistic 3D humans using quaternion-constrained continuous normalizing flows conditioned on 2D pose estimations. Our proposed quaternion flows show significant advantages over approaches using other rotation representations. Experiments demonstrate state-of-the-art results of our method on Human3.6M, particularly in ambiguous settings, and comparable pose estimation accuracy on challenging 3DPW and EMDB benchmarks.

0.30