CS Paper Radar

Reproducible Vision-Guided 6-DoF Robotic Manipulator with a Mixed Stepper-Driver Architecture and Browser-Native Control

Lasan Perera, Deneth Priyadarshana, Dulana Pitiwaduge, Isitha Dinujaya, Mokshan Colambage

cs.RO cs.CVeess.SY ·submitted 2026-08-24 04:45 UTC · v1
code/data

Abstract

We present the NeuralNexus Arm, an open, low-cost 6-DOF robotic manipulator built by an undergraduate engineering team, together with the design decisions and debugging experience needed to reproduce it. The arm is driven by a single STM32H743 microcontroller on a custom printed circuit board (PCB) and combines two stepper-driver strategies on one controller: push-pull 3.3 V step/direction outputs for onboard TMC2209 drivers on the three wrist joints, and open-drain outputs for external CL57T and DM542 drivers on the three high-torque proximal joints. We describe the mechanical design, mixed-driver electronics, interrupt-driven firmware, a MATLAB/Simscape-based inverse-kinematics pipeline, a browser-native control interface using the Web Serial API, and a lightweight vision pipeline for object localisation and autonomous pick-and-place tasks. We also document non-obvious hardware and firmware failure modes encountered during the transition from a development board to the custom PCB as reproducibility guidance. All design files and firmware are released openly. The platform actuates all six axes under coordinated control at a 2 kHz update rate and executes both manual and pre-recorded motions from the browser interface.

Comment
13 pages, 16 figures, 7 tables. Design files and firmware: https://github.com/Lasan-Perera/6-dof-arm-neuralnexus

Closest papers

Nearest neighbours by meaning across the whole index.

Surgical Master Console Using General-Purpose Robot Arms and a Separable Articulated Distal Interface: Porcine In-Vivo Evaluation

cs.RO ·2026-09-27 ·Minsung Kim, Seonho Shim, Dongho Yee, Younghoon Noh, Juahn Oh +7 more
similarity 0.64
Abstract · Submitted to IEEE ICRA 2027

High-performance surgical master consoles offer intuitive articulated manipulation but are expensive and difficult to reproduce, while accessible commercial haptic devices lack built-in interfaces for surgical wrist articulation and continuous grasp. We present a laparoscopic master in which general-purpose robot manipulators provide the programmable base and surgical-specific interaction is concentrated in a separable distal adapter. Each 6-DoF arm carries a custom 2-DoF direct-drive wrist, continuous grasp sensing, and clutch-based workspace management; the complete bimanual hardware costs approximately US$5,500, below common bimanual commercial haptic references. To support sustained hand-guided use, we characterize current scaling, gravity, and break-away friction and use them for posture-dependent gravity compensation and motion-gated assistance, reducing continuous actuation and thermal loading. A common master state drives either Isaac Sim or an RCM-constrained dual-FR3 platform. Master-state publication to FR3 target update adds at most 8 ms, and tip tracking shows 0.31-0.66 mm mean delay-aligned residuals. In a porcine cholecystectomy experiment, five common operator-side metrics and hand/tip-speed distributions were compared descriptively with human in-vivo telemetry from 120 clinical Versius recordings of 99 cholecystectomy procedures; no interruption originated from the master console, and no abnormal clinical signs were recorded during the 7-day postoperative observation period. These results demonstrate a surgical master built from general-purpose robot arms with surgical-specific interaction concentrated in a separable distal interface.

0.32

TinyARM-X: A Series of Open-Source, Configurable, and Transparent Torque-Controlled Desktop-Scale Robotic Manipulators

cs.RO ·2026-11-18 ·Nicolas Kosanovic, Jean Chagas Vaz
similarity 0.62
Abstract · 9 pages, 5 figures. Submitted to a robotics Journal. Reviews have not come in yet

Visuomotor policies have demonstrated that imprecise low-cost robots can autonomously complete complex manipulation tasks. However, most inexpensive manipulators rely on compact and rigidly position-controlled servos for actuation, which complicate simulation, operation, and safety. This work introduces TinyARM-X, a framework for easily manufacturable, configurable, and torque-controllable low-cost (<350 USD) serial manipulators. By using a single hardware/software architecture, a <7 Degree of Freedom (DoF) TinyARM can be manually reconfigured to an operational >3 DoF robot within 10 min. Actuator modeling and dynamic compensation enable torque-controlled applications like mixed-reality impedance control teleoperation and simulator force feedback rendering. Experiments include mechanical benchmarking and real-world force-aware telemanipulation. The TinyARM-7 has a payload of 33.5 g, a max speed of 0.77 m/s, and a reach of 210 mm. Moreover, with dynamic compensation, the robot has a backdrive-breakaway force of 1.4 N and a backdrive-running force of 0.7 N. Additionally, Cartesian-Impedance Control (CIC) attains a translational stiffness of >15 N/m. Lastly, the TinyARM-X stack is open-sourced to disseminate accessible desktop-scale torque-controlled robotic manipulation to the community.

0.22

Technical Report of Mobile Manipulator Robot for Industrial Environments

cs.RO cs.CVeess.SY ·2026-11-17 ·Aria Dadnavi, Matin Jamshidi, Kian Khatibi, Shahriar Karimi Makhsous, Saina Najafi Shabestari +6 more
similarity 0.61
Abstract · 25 pages, 22 figures, 4 tables. Technical report of Team Auriga's 2025 mobile manipulator (@Work) platform (Robotics and Intelligent Automat…

This paper presents the design and implementation of Auriga Robotics' mobile manipulator robot, developed at the Robotics and Intelligent Automation Laboratory, Department of Electrical Engineering, Shahid Beheshti University. Hereafter, this platform is referred to as the @Work Robot. The robot targets industrial tasks, with an emphasis on improving efficiency in repetitive or hazardous work environments. It uses a 4-wheel Mecanum drive for omnidirectional movement and a 5-degree-of-freedom manipulator arm with a 3D-printed gripper for object handling and navigation. The electronics consist of custom PCB boards built around ESP32 microcontrollers, together with an NVIDIA Jetson Orin NX that handles high-level processing and real-time system control. On the software side, Hector SLAM provides mapping and localization, A* handles path planning, and YOLO performs real-time object detection. These modules draw on fused sensor data to deliver robust navigation and reliable collision avoidance. Overall, the system shows effective hardware-software integration, with consistent performance in autonomous navigation, object handling, and task execution in industrial-like settings.

0.22

CodeActionBench: Evaluating Agentic Code-as-Policy for Embodied Manipulation

cs.RO cs.AI ·2026-09-27 ·Yiheng Lyu, Xueying Jiang, Wenhao Li, Shijian Lu, Gongjie Zhang
benchmark similarity 0.61
Abstract · 28 pages including references and appendices, 10 figures. Project website: https://codeactionbench.org

How well can general-purpose multimodal models turn visual understanding and reasoning into embodied manipulation via executable code? We introduce CodeActionBench, a benchmark of 25 manipulation tasks that evaluates this capability through agentic Code-as-Policy. Without task-specific fine-tuning, demonstrations, external specialist perception or grasp modules, privileged scene state, or predefined task policies, agents should select visual evidence, form task-relevant 3D estimates, construct manipulation targets, and iteratively execute and revise their policies. A shared robot API provides RGB observations, calibrated geometric operations, robot feedback, and bounded motion, leaving task-dependent decisions to the evaluated agent. Fixed task instances, resource budgets, and a hidden physical-outcome verifier support controlled comparisons across models and harness configurations. Extensive evaluations across nine configurations and 675 attempts achieve success rates ranging from 2.7% to 73.3%. The strongest configuration, GPT-6 Astra with Codex CLI, solves 22 of 25 tasks at least once in three attempts, demonstrating the best performance while still leaving substantial room for improvement. Trajectory analyses reveal difficulties in spatial alignment, object retention, and completion judgment, including task failures despite successfully completed motions. CodeActionBench provides a controlled testbed for measuring how general-purpose models translate their capabilities into manipulation behavior and for examining typical failure scenarios in that process.

0.53

OpenJaws: An Open Hardware UMI Framework with Stereo Localization for Generalist Manipulation

cs.RO ·2026-10-27 ·Adithyavairavan Murali, Yash Oza, Karanbir Chahal, Neel Jawale, Silas De Vries +4 more
benchmarkcode/data similarity 0.61
Abstract · Project page: https://open-jaws.github.io/

Handheld data-collection interfaces such as the Universal Manipulation Interface (UMI) allow manipulation demonstrations to be gathered in the wild without a robot in the loop, but the quality of the resulting action labels is bounded by the accuracy of vision-based localization. Existing systems recover end-effector pose from monocular visual-inertial odometry, which is subject to scale ambiguity and drift, or delegate tracking to closed-source modules and external infrastructure that reintroduce cost and setup burden. We present OpenJaws, a fully open hardware and software framework for sensorized UMI that improves localization and simplifies deployment across robot platforms. OpenJaws pairs a modular, 3D-printed gripper exposing a standardized ISO adapter with a low-cost stereo camera to recover metric camera trajectories. We further introduce UMI-Loc-Bench-v1, a benchmark quantifying real-world localization accuracy for handheld data-collection devices, and show that stereo localization substantially outperforms monocular alternatives. Finally, we demonstrate that policies trained on data collected with OpenJaws can be deployed on a real robot across multiple tasks. Hardware, software, and data are released under a commercially permissive license. Code, data, and videos are available at https://open-jaws.github.io/

0.29

Auriga Technical Report: A Task-Agnostic Agent Harness for Zero-Shot Embodied Manipulation

cs.RO cs.AI ·2026-10-31 ·Chengcheng Wang, Yuheng Shi, Siyu Xu, Yutong Wang, Jinjing Zhao +16 more
benchmarkcode/data similarity 0.60
Abstract

Vision-language models can interpret instructions and plan manipulation tasks, yet struggle when acting directly as robot policies. On RoboDojo, a large planning-execution gap separates high-level task decisions from physical execution: removing arm execution raises GPT-6 Astra's success rate from 22.5% under the reference control interface to 76.2%. We present Auriga, a task-agnostic agent harness that closes 68.3% of this gap in zero-shot manipulation without target-task trials or resets. In Auriga, the model makes all task decisions over an explicit task belief and acts through either direct tool calls or synthesized multi-step Python programs, while the harness supplies calibrated 3D measurements, finger-referenced dual-arm control, and a single admission gateway to the robot. Before motion, the model inspects a visual trajectory preview while simulation is paused; during execution, the harness checks declared stage tolerances and grasp bounds, stopping the robot on divergence and returning the measured discrepancy for in-place recovery. Developed across 13 cross-task capability iterations and frozen for evaluation, Auriga ranks first on the RoboDojo leaderboard with a 57.7% success rate (64.0 Score), more than doubling the reference harness on the same model, and remains first under scene randomization while learned policies drop by up to 33.9%. On RoboCasa365, the same frozen harness reaches a 73.2% success rate, outperforming VLA-assisted agents by up to 23.1% on composite tasks. Project page: https://auriga.stelledge.com/ Code: https://github.com/lose4578/Auriga

0.52

RoboCompiler: Graph-Native Compilation of Closed-Chain Robots for Consistent Modeling, Control, and Simulation

cs.RO ·2026-09-28 ·Mehdi Heydari Shahna, Joongheon Kim, Jouni Mattila
code/data similarity 0.59
Abstract · GitHub: https://github.com/Mehdi-Heydari-Shahna/RoboCompiler

Robots with kinematic loops, coupled actuators, and changing contacts require consistent models of configuration, motion, force, and dynamics. Yet these interfaces are often reconstructed separately for control and simulation, making closure and actuation consistency difficult to maintain. This paper presents RoboCompiler, a graph-native framework that compiles a canonical mechanism graph into a shared mechanical interface. From bodies, joints, frames, inertias, and actuator ports, it constructs closure paths and analytic residual Jacobians, then assembles feasible configurations through rank-checked continuation and correction. A tangent lift maps independent velocities to full robot and task motion, while paired actuator-port maps preserve virtual work. A constraint-curvature correction extends the reduction to accelerations and projected rigid-body dynamics, including floating-base and support modes. Cycle-local evaluation, generated Jacobians, and dependency-aware reuse enable localized updates when closure inputs change. We evaluate physical loops and task-induced constraints on a industrial excavator, Unitree Go2, Franka Panda, Kangaroo, and a six-UPS Stewart platform. High-precision constrained-dynamics and independent Pinocchio checks confirm mechanical consistency; MuJoCo and Isaac Sim/PhysX executions demonstrate task performance and model reuse under native contact. For Kangaroo, compilation reduces residual-and-Jacobian evaluation time by 96.7% and closed-loop rollout wall time by 66.8%, with dynamics and control held fixed.

0.53

GraspBench: Execution-Aware Cross-Robot Evaluation of 6-DoF Grasp Generation in MuJoCo

cs.RO cs.AI ·2026-11-05 ·Abdul Basit, Bibek Poudel, Muhammad Shafique
published similarity 0.59
Abstract · 7 pages, 6 figures, accepted for publication in ICARCV 2026

Modern 6-DoF grasp generators are often evaluated using grasp scores, dataset-level metrics, or single-robot demonstrations, yet proposal quality alone does not determine whether a grasp is executable by a particular robot. We present GraspBench, a controlled MuJoCo protocol for evaluating complete grasp-generation pipelines after robot-specific inverse-kinematics filtering, motion planning, and fixed approach-close-lift execution. GraspBench evaluates six configured pipelines across four robot embodiments, five diagnostic objects, and a structured tabletop pose grid, yielding 540 scenarios per method and 3,240 method-scenario evaluations in total. Missing outputs are conservatively counted as failures, and success follows the binary lift criterion produced by each method's execution runner. GraspGen achieves the highest overall success rate (73.1%), followed by EconomicGrasp (63.5%), while robot- and object-conditioned analyses reveal substantial variation across embodiments and object geometries. GPG produces the largest native candidate sets but achieves 44.3% success, indicating that proposal volume alone does not guarantee robot-executable grasps. Cluster-aware paired intervals support the principal method differences while not estimating repeated-execution uncertainty. The results characterize complete configured pipelines on fixed scenarios rather than intrinsic model quality or stochastic repeatability, showing that grasping performance depends jointly on the generator, robot embodiment, scene, and execution protocol.

0.33